Jetway NF81-T56N-LF [2/2]: actually implement mainboard support.

Step 2: change the Persimmon code to adapt it to the new board's hardware.

The NF81-T56N-LF is a IPC form factor embedded board:
- AMD Fusion G-T56N (1.65 GHz dual core) APU
  - 2x SO-DIMM sockets for DDR3 800-1066 SDRAM (Fixed at 1.5V)
  - VGA and LVDS (via Analogix ANX3110)
- AMD A55E (Hudson-E1) southbridge
  - 6x USB 2.0/1.1 ports
  - 5x SATA3 6Gb/s, 1x mSATA socket
  - 6-Channel HD Audio (via VIA VT1705)
  - PCI and ISA (via ITE IT8888)??
  - NEC uPD78F0532 microcontroller on I2C ("SEMA")??
- 2x RJ45 GbE (via Realtek RTL8111E x2)
- Fintek F71869AD Super I/O
  - PS/2 KB/MS port
  - RS232 header (via Unisonic UTC 75232 RS232 driver/receiver)
  - GPIO header
  - CIR header
- 1x MXIC MX25L1606E (SO8, soldered) 16 Mbit SPI flash (BIOS)

Note: MX25L1606E is 16Mbit, 8bits in a byte, so 2MB. Jetway *lies*
claiming the SPI flash is 16MB. They also use red pen over the chip
so you wont see this deceit.

Change-Id: I03ccc58bc782e800aeef0d19679ce060277b0c04
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/4801
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>

5 files changed, 66 insertions, 34 deletions

diff --git a/src/mainboard/jetway/nf81-t56n-lf/Kconfig b/src/mainboard/jetway/nf81-t56n-lf/Kconfig
index febd8dd1ef..d602ffa119 100644
--- a/src/mainboard/jetway/nf81-t56n-lf/Kconfig
+++ b/src/mainboard/jetway/nf81-t56n-lf/Kconfig
@@ -2,6 +2,7 @@
 # This file is part of the coreboot project.
 #
 # Copyright (C) 2011 Advanced Micro Devices, Inc.
+# Copyright (C) 2014 Edward O'Callaghan <eocallaghan@alterapraxis.com>.
 #
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -17,7 +18,7 @@
 # Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
 #
 
-if BOARD_AMD_PERSIMMON
+if BOARD_JETWAY_NF81_T56N_LF
 
 config BOARD_SPECIFIC_OPTIONS # dummy
 	def_bool y
@@ -25,22 +26,23 @@ config BOARD_SPECIFIC_OPTIONS # dummy
 	select CPU_AMD_AGESA_FAMILY14
 	select NORTHBRIDGE_AMD_AGESA_FAMILY14
 	select SOUTHBRIDGE_AMD_CIMX_SB800
-	select SUPERIO_FINTEK_F81865F
+	select SUPERIO_FINTEK_F71869AD
 	select HAVE_OPTION_TABLE
 	select HAVE_PIRQ_TABLE
 	select HAVE_MP_TABLE
-	select HAVE_ACPI_RESUME
+#	FIXME: Disable S3 for now. Enable by default once stabilised.
+#	select HAVE_ACPI_RESUME
 	select SB_HT_CHAIN_UNITID_OFFSET_ONLY
 	select LIFT_BSP_APIC_ID
 	select SERIAL_CPU_INIT
 	select AMDMCT
 	select HAVE_ACPI_TABLES
-	select BOARD_ROMSIZE_KB_4096
+	select BOARD_ROMSIZE_KB_2048
 	select GFXUMA
 
 config MAINBOARD_DIR
 	string
-	default amd/persimmon
+	default jetway/nf81-t56n-lf
 
 config APIC_ID_OFFSET
 	hex
@@ -48,7 +50,7 @@ config APIC_ID_OFFSET
 
 config MAINBOARD_PART_NUMBER
 	string
-	default "Persimmon"
+	default "NF81-T56N-LF"
 
 config HW_MEM_HOLE_SIZEK
 	hex
@@ -101,7 +103,7 @@ config VGA_BIOS
 
 config VGA_BIOS_ID
 	string
-	default "1002,9802"
+	default "1002,9806" # FUSION_G_T56N
 
 config SB800_AHCI_ROM
 	bool
@@ -111,4 +113,4 @@ config DRIVERS_PS2_KEYBOARD
 	bool
 	default n
 
-endif # BOARD_AMD_PERSIMMON
+endif # BOARD_JETWAY_NF81_T56N_LF
diff --git a/src/mainboard/jetway/nf81-t56n-lf/board_info.txt b/src/mainboard/jetway/nf81-t56n-lf/board_info.txt
index 85cb19a9d9..674875153f 100644
--- a/src/mainboard/jetway/nf81-t56n-lf/board_info.txt
+++ b/src/mainboard/jetway/nf81-t56n-lf/board_info.txt
@@ -1,5 +1,6 @@
-Board name: DBFT1-00-EVAL-KT (Persimmon)
-Category: eval
+Board URL: http://www.jetway.com.tw/jw/ipcboard_view.asp?productid=822&proname=NF81-T56N-LF
+Category: Mini-ITX
+ROM package: SOIC8
 ROM protocol: SPI
 ROM socketed: n
 Flashrom support: y
diff --git a/src/mainboard/jetway/nf81-t56n-lf/devicetree.cb b/src/mainboard/jetway/nf81-t56n-lf/devicetree.cb
index 8b1acd5bb3..347d4a6d47 100644
--- a/src/mainboard/jetway/nf81-t56n-lf/devicetree.cb
+++ b/src/mainboard/jetway/nf81-t56n-lf/devicetree.cb
@@ -2,6 +2,7 @@
 # This file is part of the coreboot project.
 #
 # Copyright (C) 2011 Advanced Micro Devices, Inc.
+# Copyright (C) 2014 Edward O'Callaghan <eocallaghan@alterapraxis.com>.
 #
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -29,7 +30,8 @@ chip northbridge/amd/agesa/family14/root_complex
 					chip northbridge/amd/agesa/family14 # PCI side of HT root complex
 						device pci 0.0 on end # Root Complex
 						device pci 1.0 on end # Internal Graphics P2P bridge 0x980[2456]
-						device pci 4.0 on end # PCIE P2P bridge on-board NIC
+#						device pci 1.1 on end # Internal Audio P2P bridge 0x1314
+						device pci 4.0 off end
 						device pci 5.0 off end # PCIE P2P bridge
 						device pci 6.0 on end # PCIE P2P bridge PCIe slot
 						device pci 7.0 off end # PCIE P2P bridge
@@ -50,47 +52,64 @@ chip northbridge/amd/agesa/family14/root_complex
 							device i2c 51 on end
 						end
 					end # SM
-					device pci 14.1 on end # IDE	0x439c
+					device pci 14.1 off end # IDE	0x439c
 					device pci 14.2 on end # HDA	0x4383
 					device pci 14.3 on # LPC		0x439d
-					chip superio/fintek/f81865f
-						device pnp 4e.0 off		# Floppy
+					chip superio/fintek/f71869ad
+# XXX: 4e is the default index port and .xy is the
+# LDN indexing the pnp_info array found in the superio.c
+# NB: Jetway board changes the default (0x4e) index port to (0x2e) by pin 124,
+#     see page 18 from Fintek F71869 V1.1 datasheet.
+						device pnp 2e.00 off		# Floppy
 							io 0x60 = 0x3f0
 							irq 0x70 = 6
 							drq 0x74 = 2
 						end
-						device pnp 4e.3 off end			# Parallel Port
-						device pnp 4e.4 off end			# Hardware Monitor
-						device pnp 4e.5 on #  Keyboard
-							io 0x60 = 0x60
-							io 0x62 = 0x64
-							irq 0x70 = 1
-						end
-						device pnp 4e.6 off end			# GPIO
-						device pnp 4e.a off end			# PME
-						device pnp 4e.10 on			# COM1
+						device pnp 2e.01 on			# COM1
 							io 0x60 = 0x3f8
 							irq 0x70 = 4
 						end
-						device pnp 4e.11 on			# COM2
+# COM2 not physically wired on board.
+						device pnp 2e.02 off		# COM2
 							io 0x60 = 0x2f8
 							irq 0x70 = 3
 						end
-					end # f81865f
+						device pnp 2e.03 off		# Parallel Port
+							io 0x60 = 0x378
+							irq 0x70 = 7
+							drq 0x74 = 3
+						end
+						device pnp 2e.04 on			# Hardware Monitor
+							io 0x60 = 0x295
+							irq 0x70 = 0
+						end
+						device pnp 2e.05 on # KBC
+							io 0x60 = 0x060
+							irq 0x70 = 1 # Keyboard IRQ
+							irq 0x72 = 12 # Mouse IRQ
+						end
+						device pnp 2e.06 off end	# GPIO
+# TODO: Verify BSEL register content with vendor BIOS using
+# $ sudo isadump 0x4e 0x4f 0x7
+# which select logical device (LDN) 7. Then read that we have in 0x27, bit1
+						device pnp 2e.07 on end		# BSEL
+						device pnp 2e.0a off end	# PME
+					end # f71869ad
 				end #LPC
 				device pci 14.4 on  end # PCIB 0x4384, NOTE: PCI interface pins shared with GPIO {GPIO 35:0}
-				device pci 14.5 off end # OHCI FS/LS USB
+				device pci 14.5 on end # OHCI FS/LS USB (0x4399)
 				device pci 14.6 off end # Hudson-E1 GbE MAC: Broadcom BCM5785 (14E4:1699)
-				device pci 15.0 off end # PCIe PortA
+				device pci 15.0 on end # PCIe PortA (0x43a0) GbE MAC: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 (10ec:8168)
 				device pci 15.1 off end # PCIe PortB
 				device pci 15.2 off end # PCIe PortC
 				device pci 15.3 off end # PCIe PortD
-				device pci 16.0 off end # OHCI USB 10-13
-				device pci 16.2 off end # EHCI USB 10-13
+				device pci 16.0 on end # OHCI USB 10-13 (0x4397)
+				device pci 16.2 on end # EHCI USB 10-13 (0x4396)
 				register "gpp_configuration" = "0" #4:0:0:0 (really need to disable all 4 somehow)
 				register "boot_switch_sata_ide" = "0"	# 0: boot from SATA. 1: IDE
 
-				#set up SB800 Fan control registers and IMC fan controls
+				# Set up SB800 Fan control registers and IMC fan controls
+                # TODO: verify SB handles the HW monitor and not the super io (PME)
 				register "imc_port_address" = "0x6E"	# 0x2E and 0x6E are common
 				register "fan0_enabled" = "1"
 				register "fan1_enabled" = "1"
@@ -150,6 +169,11 @@ chip northbridge/amd/agesa/family14/root_complex
 			device pci 18.6 on end
 			device pci 18.7 on end
 
+#
+# TODO: Verify the proper SocketId/MemChannelId/DimmId addresses of the SPD
+# with i2cdump tool.
+# Notes:  0xa0=0x50*2, 0xa2=0x51*2.. 0x50-0x54 are usually RAM modules on the SMBus.
+#
 			register "spdAddrLookup" = "
 			{
 				{ {0xA0, 0xA2}, {0x00, 0x00}, }, // socket 0 - Channel 0 & 1 - 8-bit SPD addresses
diff --git a/src/mainboard/jetway/nf81-t56n-lf/platform_cfg.h b/src/mainboard/jetway/nf81-t56n-lf/platform_cfg.h
index f084b2f170..ce08bee1e7 100644
--- a/src/mainboard/jetway/nf81-t56n-lf/platform_cfg.h
+++ b/src/mainboard/jetway/nf81-t56n-lf/platform_cfg.h
@@ -2,6 +2,7 @@
  * This file is part of the coreboot project.
  *
  * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ * Copyright (C) 2014 Edward O'Callaghan <eocallaghan@alterapraxis.com>.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -211,6 +212,7 @@
  */
 #define GEC_CONFIG			0
 
+/* FIXME: Verify this for sound to work! */
 static const CODECENTRY persimmon_codec_alc269[] =
 {
 	/* NID, PinConfig */
@@ -228,6 +230,7 @@ static const CODECENTRY persimmon_codec_alc269[] =
 	{0xff, 0xffffffff} /* end of table */
 };
 
+/* FIXME: Verify this for sound to work! */
 static const CODECTBLLIST codec_tablelist[] =
 {
 	{0x010ec0269, (CODECENTRY*)&persimmon_codec_alc269[0]},
diff --git a/src/mainboard/jetway/nf81-t56n-lf/romstage.c b/src/mainboard/jetway/nf81-t56n-lf/romstage.c
index 98c64eda44..12149210b6 100644
--- a/src/mainboard/jetway/nf81-t56n-lf/romstage.c
+++ b/src/mainboard/jetway/nf81-t56n-lf/romstage.c
@@ -2,6 +2,7 @@
  * This file is part of the coreboot project.
  *
  * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ * Copyright (C) 2014 Edward O'Callaghan <eocallaghan@alterapraxis.com>.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -31,7 +32,7 @@
 #include <cpu/x86/mtrr.h>
 #include "agesawrapper.h"
 #include "cpu/x86/bist.h"
-#include "superio/fintek/f81865f/f81865f_early_serial.c"
+#include "superio/fintek/f71869ad/f71869ad.h"
 #include "cpu/x86/lapic.h"
 #include "drivers/pc80/i8254.c"
 #include "drivers/pc80/i8259.c"
@@ -45,7 +46,8 @@
 void disable_cache_as_ram(void); /* cache_as_ram.inc */
 void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx);
 
-#define SERIAL_DEV PNP_DEV(0x4e, F81865F_SP1)
+/* Ensure Super I/O config address (i.e., 0x2e or 0x4e) matches that of devicetree.cb */
+#define SERIAL_DEV PNP_DEV(0x2e, F71869AD_SP1)
 
 void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 {
@@ -70,7 +72,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 		sb_Poweron_Init();
 
 		post_code(0x31);
-		f81865f_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
+		f71869ad_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
 		console_init();
 	}