fix naming convention, turn X.

another commit is following
Signed-off-by: Yinghai Lu <yinghailu@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2468 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

10 files changed, 0 insertions, 1097 deletions

diff --git a/src/mainboard/iwill/DK8S2/Config.lb b/src/mainboard/iwill/DK8S2/Config.lb
deleted file mode 100644
index 3086ab9d77..0000000000
--- a/src/mainboard/iwill/DK8S2/Config.lb
+++ /dev/null
@@ -1,222 +0,0 @@
-##
-## Compute the location and size of where this firmware image
-## (linuxBIOS plus bootloader) will live in the boot rom chip.
-##
-if USE_FALLBACK_IMAGE
-	default ROM_SECTION_SIZE   = FALLBACK_SIZE
-	default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE )
-else
-	default ROM_SECTION_SIZE   = ( ROM_SIZE - FALLBACK_SIZE )
-	default ROM_SECTION_OFFSET = 0
-end
-
-##
-## Compute the start location and size size of
-## The linuxBIOS bootloader.
-##
-default PAYLOAD_SIZE            = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE )
-default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
-
-##
-## Compute where this copy of linuxBIOS will start in the boot rom
-##
-default _ROMBASE      = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE )
-
-##
-## Compute a range of ROM that can cached to speed up linuxBIOS,
-## execution speed.
-##
-## XIP_ROM_SIZE must be a power of 2.
-## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE
-##
-default XIP_ROM_SIZE=65536
-default XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE )
-
-##
-## Set all of the defaults for an x86 architecture
-##
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-if HAVE_MP_TABLE object mptable.o end
-if HAVE_PIRQ_TABLE object irq_tables.o end
-#object reset.o
-
-## ATI Rage XL framebuffering graphics driver
-dir /drivers/ati/ragexl
-
-##
-## Romcc output
-##
-makerule ./failover.E
-	depends "$(MAINBOARD)/failover.c ./romcc" 
-	action "./romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./failover.inc
-	depends "$(MAINBOARD)/failover.c ./romcc"
-	action "./romcc    -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./auto.E 
-	depends	"$(MAINBOARD)/auto.c option_table.h ./romcc" 
-	action	"./romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc 
-	depends "$(MAINBOARD)/auto.c option_table.h ./romcc"
-	action	"./romcc    -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-end
-
-##
-## Build our 16 bit and 32 bit linuxBIOS entry code
-##
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-
-##
-## Build our reset vector (This is where linuxBIOS is entered)
-##
-if USE_FALLBACK_IMAGE 
-	mainboardinit cpu/x86/16bit/reset16.inc 
-	ldscript /cpu/x86/16bit/reset16.lds 
-else
-	mainboardinit cpu/x86/32bit/reset32.inc 
-	ldscript /cpu/x86/32bit/reset32.lds 
-end
-
-### Should this be in the northbridge code?
-mainboardinit arch/i386/lib/cpu_reset.inc
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-###
-### This is the early phase of linuxBIOS startup 
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if USE_FALLBACK_IMAGE
-	ldscript /arch/i386/lib/failover.lds 
-	mainboardinit ./failover.inc
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
-mainboardinit cpu/x86/fpu/enable_fpu.inc
-mainboardinit cpu/x86/mmx/enable_mmx.inc
-mainboardinit cpu/x86/sse/enable_sse.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/sse/disable_sse.inc
-mainboardinit cpu/x86/mmx/disable_mmx.inc
-
-##
-## Include the secondary Configuration files 
-##
-dir /pc80
-config chip.h
-
-# config for Iwill/DK8S2
-chip northbridge/amd/amdk8/root_complex
-	device pci_domain 0 on
-		chip northbridge/amd/amdk8
-			device pci 18.0 on # LDT 0
-				chip southbridge/amd/amd8131
-					device pci 0.0 on end
-					device pci 0.1 on end
-					device pci 1.0 on end
-					device pci 1.1 on end
-				end
-				chip southbridge/amd/amd8111
-					# this "device pci 0.0" is the parent the next one
-					# PCI bridge
-					device pci 0.0 on
-						device pci 0.0 on end
-						device pci 0.1 on end
-						device pci 0.2 on end
-						device pci 1.0 off end
-					end
-					device pci 1.0 on
-						chip superio/winbond/w83627hf
-							device pnp  2e.0 on      # Floppy
-								 io 0x60 = 0x3f0
-								irq 0x70 = 6
-								drq 0x74 = 2
-							end
-							device pnp  2e.1 off     # Parallel Port
-								 io 0x60 = 0x378
-								irq 0x70 = 7
-							end
-							device pnp  2e.2 on      # Com1
-								 io 0x60 = 0x3f8
-								irq 0x70 = 4
-							end
-							device pnp  2e.3 off     # Com2
-								io 0x60 = 0x2f8
-								irq 0x70 = 3
-							end
-							device pnp  2e.5 on      # Keyboard
-								 io 0x60 = 0x60
-								 io 0x62 = 0x64
-							       irq 0x70 = 1
-								irq 0x72 = 12
-							end
-							device pnp  2e.6 off end # CIR
-							device pnp  2e.7 off end # GAME_MIDI_GIPO1
-							device pnp  2e.8 off end # GPIO2
-							device pnp  2e.9 off end # GPIO3
-							device pnp  2e.a off end # ACPI
-							device pnp  2e.b on      # HW Monitor
-								 io 0x60 = 0x290
-							end
-							register "com1" = "{1}"
-						#	register "com1" = "{1, 0, 0x3f8, 4}"
-						#	register "lpt" = "{1}"
-						end
-					end
-					device pci 1.1 on end
-					device pci 1.2 on end
-					device pci 1.3 on end
-					device pci 1.5 off end
-					device pci 1.6 off end
-				end
-			end # LDT0
-			device pci 18.0 on end # LDT1
-			device pci 18.0 on end # LDT2
-			device pci 18.1 on end
-			device pci 18.2 on end
-			device pci 18.3 on end
-		end
-		chip northbridge/amd/amdk8
-			device pci 19.0 on end
-			device pci 19.0 on end
-			device pci 19.0 on end
-			device pci 19.1 on end
-			device pci 19.2 on end
-			device pci 19.3 on end
-		end
-	end
-	device apic_cluster 0 on
-		chip cpu/amd/socket_940
-			device apic 0 on end
-		end
-		chip cpu/amd/socket_940
-			device apic 1 on end
-		end
-	end
-end
-
diff --git a/src/mainboard/iwill/DK8S2/Options.lb b/src/mainboard/iwill/DK8S2/Options.lb
deleted file mode 100644
index c0a1043c16..0000000000
--- a/src/mainboard/iwill/DK8S2/Options.lb
+++ /dev/null
@@ -1,215 +0,0 @@
-uses HAVE_MP_TABLE
-uses HAVE_PIRQ_TABLE
-uses USE_FALLBACK_IMAGE
-uses HAVE_FALLBACK_BOOT
-uses HAVE_HARD_RESET
-uses IRQ_SLOT_COUNT
-uses HAVE_OPTION_TABLE
-uses CONFIG_MAX_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses FALLBACK_SIZE
-uses ROM_SIZE
-uses ROM_SECTION_SIZE
-uses ROM_IMAGE_SIZE
-uses ROM_SECTION_SIZE
-uses ROM_SECTION_OFFSET
-uses CONFIG_ROM_STREAM
-uses CONFIG_ROM_STREAM_START
-uses PAYLOAD_SIZE
-uses _ROMBASE
-uses XIP_ROM_SIZE
-uses XIP_ROM_BASE
-uses STACK_SIZE
-uses HEAP_SIZE
-uses USE_OPTION_TABLE
-uses LB_CKS_RANGE_START
-uses LB_CKS_RANGE_END
-uses LB_CKS_LOC
-uses MAINBOARD
-uses MAINBOARD_PART_NUMBER
-uses MAINBOARD_VENDOR
-uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses LINUXBIOS_EXTRA_VERSION
-uses _RAMBASE
-uses TTYS0_BAUD
-uses TTYS0_BASE
-uses TTYS0_LCS
-uses DEFAULT_CONSOLE_LOGLEVEL
-uses MAXIMUM_CONSOLE_LOGLEVEL
-uses MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CONFIG_CONSOLE_SERIAL8250
-uses HAVE_INIT_TIMER
-uses CONFIG_GDB_STUB
-uses CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses OBJCOPY
-
-uses CONFIG_USE_INIT
-
-## ROM_SIZE is the size of boot ROM that this board will use.
-default ROM_SIZE=524288
-
-###
-### Build options
-###
-
-##
-## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
-##
-default FALLBACK_SIZE=0x40000
-
-##
-## Build code for the fallback boot
-##
-default HAVE_FALLBACK_BOOT=1
-
-##
-## Build code to reset the motherboard from linuxBIOS
-##
-default HAVE_HARD_RESET=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default HAVE_PIRQ_TABLE=1
-default IRQ_SLOT_COUNT=9
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default HAVE_MP_TABLE=1
-
-##
-## Build code to export a CMOS option table
-##
-default HAVE_OPTION_TABLE=1
-
-##
-## Move the default LinuxBIOS cmos range off of AMD RTC registers
-##
-default LB_CKS_RANGE_START=49
-default LB_CKS_RANGE_END=122
-default LB_CKS_LOC=123
-
-##
-## Build code for SMP support
-## Only worry about 2 micro processors
-##
-default CONFIG_SMP=1
-default CONFIG_MAX_CPUS=2
-default CONFIG_MAX_PHYSICAL_CPUS=2
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_IOAPIC=1
-
-##
-## Clean up the motherboard id strings
-##
-default MAINBOARD_PART_NUMBER="HDAMA"
-default MAINBOARD_VENDOR="ARIMA"
-default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x161f
-default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x3016
-
-
-###
-### LinuxBIOS layout values
-###
-
-## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy.
-default ROM_IMAGE_SIZE = 65536
-
-##
-## Use a small 8K stack
-##
-default STACK_SIZE=0x2000
-
-##
-## Use a small 16K heap
-##
-default HEAP_SIZE=0x4000
-
-##
-## Only use the option table in a normal image
-##
-default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE
-
-##
-## LinuxBIOS C code runs at this location in RAM
-##
-default _RAMBASE=0x00004000
-
-##
-## Load the payload from the ROM
-##
-default CONFIG_ROM_STREAM = 1
-
-###
-### Defaults of options that you may want to override in the target config file
-### 
-
-##
-## The default compiler
-##
-#default CC="$(CROSS_COMPILE)gcc -m32"
-#default HOSTCC="gcc"
-
-##
-## Disable the gdb stub by default
-##
-default CONFIG_GDB_STUB=0
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default TTYS0_BAUD=115200
-#default TTYS0_BAUD=57600
-#default TTYS0_BAUD=38400
-#default TTYS0_BAUD=19200
-#default TTYS0_BAUD=9600
-#default TTYS0_BAUD=4800
-#default TTYS0_BAUD=2400
-#default TTYS0_BAUD=1200
-
-# Select the serial console base port
-default TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default TTYS0_LCS=0x3
-
-##
-### Select the linuxBIOS loglevel
-##
-## EMERG      1   system is unusable               
-## ALERT      2   action must be taken immediately 
-## CRIT       3   critical conditions              
-## ERR        4   error conditions                 
-## WARNING    5   warning conditions               
-## NOTICE     6   normal but significant condition 
-## INFO       7   informational                    
-## DEBUG      8   debug-level messages             
-## SPEW       9   Way too many details             
-
-## Request this level of debugging output
-default  DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default  MAXIMUM_CONSOLE_LOGLEVEL=8
-
-##
-## Select power on after power fail setting
-default MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
-
-### End Options.lb
-end
diff --git a/src/mainboard/iwill/DK8S2/auto.c b/src/mainboard/iwill/DK8S2/auto.c
deleted file mode 100644
index 06b3e42cdf..0000000000
--- a/src/mainboard/iwill/DK8S2/auto.c
+++ /dev/null
@@ -1,201 +0,0 @@
-#define ASSEMBLY 1
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <arch/io.h>
-#include <device/pnp_def.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include <arch/cpu.h>
-#include "option_table.h"
-#include "pc80/mc146818rtc_early.c"
-#include "pc80/serial.c"
-#include "arch/i386/lib/console.c"
-#include "ram/ramtest.c"
-#include "southbridge/amd/amd8111/amd8111_early_smbus.c"
-#include "northbridge/amd/amdk8/raminit.h"
-#include "cpu/amd/model_fxx/apic_timer.c"
-#include "lib/delay.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-#include "northbridge/amd/amdk8/debug.c"
-#include <cpu/amd/model_fxx_rev.h>
-#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
-#include "cpu/amd/mtrr/amd_earlymtrr.c"
-#include "cpu/x86/bist.h"
-
-
-#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
-
-static void hard_reset(void)
-{
-	set_bios_reset();
-
-	/* enable cf9 */
-	pci_write_config8(PCI_DEV(0, 0x04, 3), 0x41, 0xf1);
-	/* reset */
-	outb(0x0e, 0x0cf9);
-}
-
-static void soft_reset(void)
-{
-	set_bios_reset();
-	pci_write_config8(PCI_DEV(0, 0x04, 0), 0x47, 1);
-}
-
-/*
- * GPIO28 of 8111 will control H0_MEMRESET_L
- * GPIO29 of 8111 will control H1_MEMRESET_L
- */
-static void memreset_setup(void)
-{
-	if (is_cpu_pre_c0()) {
-		/* Set the memreset low */
-		outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 28);
-		/* Ensure the BIOS has control of the memory lines */
-		outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 29);
-	} else {
-		/* Ensure the CPU has controll of the memory lines */
-		outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 29);
-	}
-}
-
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
-	if (is_cpu_pre_c0()) {
-		udelay(800);
-		/* Set memreset_high */
-		outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 28);
-		udelay(90);
-	}
-}
-
-static unsigned int generate_row(uint8_t node, uint8_t row, uint8_t maxnodes)
-{
-	/* Routing Table Node i 
-	 *
-	 * F0: 0x40, 0x44, 0x48, 0x4c, 0x50, 0x54, 0x58, 0x5c 
-	 *  i:	  0,	1,    2,    3,	  4,	5,    6,    7
-	 *
-	 * [ 0: 3] Request Route
-	 *     [0] Route to this node
-	 *     [1] Route to Link 0
-	 *     [2] Route to Link 1
-	 *     [3] Route to Link 2
-	 * [11: 8] Response Route
-	 *     [0] Route to this node
-	 *     [1] Route to Link 0
-	 *     [2] Route to Link 1
-	 *     [3] Route to Link 2
-	 * [19:16] Broadcast route
-	 *     [0] Route to this node
-	 *     [1] Route to Link 0
-	 *     [2] Route to Link 1
-	 *     [3] Route to Link 2
-	 */
-
-	uint32_t ret=0x00010101; /* default row entry */
-
-	static const unsigned int rows_2p[2][2] = {
-		{ 0x00050101, 0x00010404 },
-		{ 0x00010404, 0x00050101 }
-	};
-
-	if(maxnodes>2) {
-		print_debug("this mainboard is only designed for 2 cpus\r\n");
-		maxnodes=2;
-	}
-
-	if (!(node>=maxnodes || row>=maxnodes)) {
-		ret=rows_2p[node][row];
-	}
-
-	return ret;
-}
-
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
-	/* nothing to do */
-}
-
-static inline int spd_read_byte(unsigned device, unsigned address)
-{
-	return smbus_read_byte(device, address);
-}
-
-#include "northbridge/amd/amdk8/raminit.c"
-#include "northbridge/amd/amdk8/coherent_ht.c"
-#include "northbridge/amd/amdk8/incoherent_ht.c"
-#include "sdram/generic_sdram.c"
-#include "northbridge/amd/amdk8/resourcemap.c"
-#include "cpu/amd/dualcore/dualcore.c"
-
-#define FIRST_CPU  1
-#define SECOND_CPU 1
-#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU)
-static void main(unsigned long bist)
-{
-	static const struct mem_controller cpu[] = {
-#if FIRST_CPU
-		{
-			.node_id = 0,
-			.f0 = PCI_DEV(0, 0x18, 0),
-			.f1 = PCI_DEV(0, 0x18, 1),
-			.f2 = PCI_DEV(0, 0x18, 2),
-			.f3 = PCI_DEV(0, 0x18, 3),
-			.channel0 = { (0xa<<3)|0, (0xa<<3)|2, 0, 0 },
-			.channel1 = { (0xa<<3)|1, (0xa<<3)|3, 0, 0 },
-		},
-#endif
-#if SECOND_CPU
-		{
-			.node_id = 1,
-			.f0 = PCI_DEV(0, 0x19, 0),
-			.f1 = PCI_DEV(0, 0x19, 1),
-			.f2 = PCI_DEV(0, 0x19, 2),
-			.f3 = PCI_DEV(0, 0x19, 3),
-			.channel0 = { (0xa<<3)|4, (0xa<<3)|6, 0, 0 },
-			.channel1 = { (0xa<<3)|5, (0xa<<3)|7, 0, 0 },
-		},
-#endif
-	};
-
-	int needs_reset;
-        unsigned nodeid;
-
-	if (bist == 0) {
-		k8_init_and_stop_secondaries();
-	}
-	/* Setup the console */	
-	w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
-	uart_init();
-	console_init();
-
-	/* Halt if there was a built in self test failure */
-	report_bist_failure(bist);
-
-	setup_default_resource_map();
-	needs_reset = setup_coherent_ht_domain();
-	needs_reset |= ht_setup_chain(PCI_DEV(0, 0x18, 0), 0x80);
-	if (needs_reset) {
-		print_info("ht reset -\r\n");
-		soft_reset();
-	}
-	
-#if 0
-	print_pci_devices();
-#endif
-
-	enable_smbus();
-
-#if 0
-	dump_spd_registers(&cpu[0]);
-#endif
-
-	memreset_setup();
-	sdram_initialize(sizeof(cpu)/sizeof(cpu[0]), cpu);
-
-#if 0
-	dump_pci_devices();
-	dump_pci_device(PCI_DEV(0, 0x18, 2));
-#endif
-}
diff --git a/src/mainboard/iwill/DK8S2/chip.h b/src/mainboard/iwill/DK8S2/chip.h
deleted file mode 100644
index 402cd5e6d2..0000000000
--- a/src/mainboard/iwill/DK8S2/chip.h
+++ /dev/null
@@ -1,5 +0,0 @@
-extern struct chip_operations mainboard_Iwill_DK8S2_ops;
-
-struct mainboard_Iwill_DK8S2_config {
-	int nothing;
-};
diff --git a/src/mainboard/iwill/DK8S2/cmos.layout b/src/mainboard/iwill/DK8S2/cmos.layout
deleted file mode 100644
index 5eb88b9a5a..0000000000
--- a/src/mainboard/iwill/DK8S2/cmos.layout
+++ /dev/null
@@ -1,98 +0,0 @@
-entries
-
-#start-bit length  config config-ID    name
-#0            8       r       0        seconds
-#8            8       r       0        alarm_seconds
-#16           8       r       0        minutes
-#24           8       r       0        alarm_minutes
-#32           8       r       0        hours
-#40           8       r       0        alarm_hours
-#48           8       r       0        day_of_week
-#56           8       r       0        day_of_month
-#64           8       r       0        month
-#72           8       r       0        year
-#80           4       r       0        rate_select
-#84           3       r       0        REF_Clock
-#87           1       r       0        UIP
-#88           1       r       0        auto_switch_DST
-#89           1       r       0        24_hour_mode
-#90           1       r       0        binary_values_enable
-#91           1       r       0        square-wave_out_enable
-#92           1       r       0        update_finished_enable
-#93           1       r       0        alarm_interrupt_enable
-#94           1       r       0        periodic_interrupt_enable
-#95           1       r       0        disable_clock_updates
-#96         288       r       0        temporary_filler
-0          384       r       0        reserved_memory
-384          1       e       4        boot_option
-385          1       e       4        last_boot
-386          1       e       1        ECC_memory
-388          4       r       0        reboot_bits
-392          3       e       5        baud_rate
-395          1       e       1        hw_scrubber
-396          1       e       1        interleave_chip_selects
-397          2       e       8        max_mem_clock
-399	     1	     e	     2	      dual_core
-400          1       e       1        power_on_after_fail
-412          4       e       6        debug_level
-416          4       e       7        boot_first
-420          4       e       7        boot_second
-424          4       e       7        boot_third
-428          4       h       0        boot_index
-432	     8       h       0        boot_countdown
-440          4       e       9        slow_cpu
-444          1       e       1        nmi
-445          1       e       1        iommu
-728        256       h       0        user_data
-984         16       h       0        check_sum
-# Reserve the extended AMD configuration registers
-1000        24       r       0        reserved_memory
-
-
-
-enumerations
-
-#ID value   text
-1     0     Disable
-1     1     Enable
-2     0     Enable
-2     1     Disable
-4     0     Fallback
-4     1     Normal
-5     0     115200
-5     1     57600
-5     2     38400
-5     3     19200
-5     4     9600
-5     5     4800
-5     6     2400
-5     7     1200
-6     6     Notice
-6     7     Info
-6     8     Debug
-6     9     Spew
-7     0     Network
-7     1     HDD
-7     2     Floppy
-7     8     Fallback_Network
-7     9     Fallback_HDD
-7     10    Fallback_Floppy
-#7     3     ROM
-8     0     DDR400
-8     1     DDR333
-8     2     DDR266
-8     3     DDR200
-9     0     off
-9     1     87.5%
-9     2     75.0%
-9     3     62.5%
-9     4     50.0%
-9     5     37.5%
-9     6     25.0%
-9     7     12.5%
-
-checksums
-
-checksum 392 983 984
-
-
diff --git a/src/mainboard/iwill/DK8S2/failover.c b/src/mainboard/iwill/DK8S2/failover.c
deleted file mode 100644
index 262fdd60bd..0000000000
--- a/src/mainboard/iwill/DK8S2/failover.c
+++ /dev/null
@@ -1,66 +0,0 @@
-#define ASSEMBLY 1
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <device/pci_ids.h>
-#include <arch/io.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include "pc80/mc146818rtc_early.c"
-#include "southbridge/amd/amd8111/amd8111_enable_rom.c"
-#include "northbridge/amd/amdk8/early_ht.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "cpu/x86/mtrr/earlymtrr.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-
-static unsigned long main(unsigned long bist)
-{
-        unsigned nodeid;
-
-	/* Make cerain my local apic is useable */
-	enable_lapic();
-
-	/* Is this a cpu only reset? */
-	if (early_mtrr_init_detected()) {
-		if (last_boot_normal()) {
-			goto normal_image;
-		} else {
-			goto fallback_image;
-		}
-	}
-	/* Is this a secondary cpu? */
-	if (!boot_cpu()) {
-		if (last_boot_normal()) {
-			goto normal_image;
-		} else {
-			goto fallback_image;
-		}
-	}
-	
-
-	/* Nothing special needs to be done to find bus 0 */
-	/* Allow the HT devices to be found */
-	enumerate_ht_chain();
-	
-	/* Setup the 8111 */
-	amd8111_enable_rom();
-
-	/* Is this a deliberate reset by the bios */
-	if (bios_reset_detected() && last_boot_normal()) {
-		goto normal_image;
-	}
-	/* This is the primary cpu how should I boot? */
-	else if (do_normal_boot()) {
-		goto normal_image;
-	}
-	else {
-		goto fallback_image;
-	}
- normal_image:
-	asm volatile ("jmp __normal_image" 
-		: /* outputs */ 
-		: "a" (bist) /* inputs */
-		: /* clobbers */
-		);
- fallback_image:
-	return bist;
-}
diff --git a/src/mainboard/iwill/DK8S2/irq_tables.c b/src/mainboard/iwill/DK8S2/irq_tables.c
deleted file mode 100644
index 28c90e0f85..0000000000
--- a/src/mainboard/iwill/DK8S2/irq_tables.c
+++ /dev/null
@@ -1,41 +0,0 @@
-/* This file was generated by getpir.c, do not modify! 
-   (but if you do, please run checkpir on it to verify)
- * Contains the IRQ Routing Table dumped directly from your memory, which BIOS sets up
- *
- * Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM
-*/
-
-#include <arch/pirq_routing.h>
-
-const struct irq_routing_table intel_irq_routing_table = {
-	PIRQ_SIGNATURE,  /* u32 signature */
-	PIRQ_VERSION,    /* u16 version   */
-	32+16*12,	 /* there can be total 12 devices on the bus */
-	0x00,		 /* Where the interrupt router lies (bus) */
-	(0x07<<3)|0x3,   /* Where the interrupt router lies (dev) */
-	0,		 /* IRQs devoted exclusively to PCI usage */
-	0x1022,		 /* Vendor */
-	0x746b,		 /* Device */
-	0,		 /* Crap (miniport) */
-	{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */
-	0x6d,         /*  u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */
-	{
-		/* bus,     dev|fn,   {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap},  slot, rfu */
-		{0x00,(0x07<<3)|0x0, {{0x01, 0xdef8}, {0x02, 0xdef8}, {0x03, 0xdef8}, {0x04, 0x0def8}}, 0x0, 0x0},
-		{0x03,(0x00<<3)|0x0, {{0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x0000}, {0x04, 0x0def8}}, 0x0, 0x0},
-		{0x02,(0x01<<3)|0x0, {{0x02, 0xdef8}, {0x03, 0xdef8}, {0x04, 0xdef8}, {0x01, 0x0def8}}, 0x1, 0x0},
-		{0x02,(0x02<<3)|0x0, {{0x03, 0xdef8}, {0x04, 0xdef8}, {0x01, 0xdef8}, {0x02, 0x0def8}}, 0x2, 0x0},
-		{0x01,(0x01<<3)|0x0, {{0x02, 0xdef8}, {0x03, 0xdef8}, {0x04, 0xdef8}, {0x01, 0x0def8}}, 0x3, 0x0},
-		{0x01,(0x02<<3)|0x0, {{0x03, 0xdef8}, {0x04, 0xdef8}, {0x01, 0xdef8}, {0x02, 0x0def8}}, 0x4, 0x0},
-		{0x03,(0x04<<3)|0x0, {{0x01, 0xdef8}, {0x02, 0xdef8}, {0x03, 0xdef8}, {0x04, 0x0def8}}, 0x5, 0x0},
-		{0x03,(0x05<<3)|0x0, {{0x02, 0xdef8}, {0x03, 0xdef8}, {0x04, 0xdef8}, {0x01, 0x0def8}}, 0x6, 0x0},
-		{0x03,(0x06<<3)|0x0, {{0x03, 0xdef8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0},
-		{0x02,(0x03<<3)|0x0, {{0x04, 0xdef8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0},
-		{0x02,(0x04<<3)|0x0, {{0x01, 0xdef8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0},
-		{0x02,(0x05<<3)|0x0, {{0x02, 0xdef8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0},
-	}
-};
-unsigned long write_pirq_routing_table(unsigned long addr)
-{
-        return copy_pirq_routing_table(addr);
-}
diff --git a/src/mainboard/iwill/DK8S2/mainboard.c b/src/mainboard/iwill/DK8S2/mainboard.c
deleted file mode 100644
index 465eb3d6d0..0000000000
--- a/src/mainboard/iwill/DK8S2/mainboard.c
+++ /dev/null
@@ -1,11 +0,0 @@
-#include <console/console.h>
-#include <device/device.h>
-#include <device/pci.h>
-#include <device/pci_ids.h>
-#include <device/pci_ops.h>
-#include "chip.h"
-
-struct chip_operations mainboard_Iwill_DK8S2_ops = {
-	CHIP_NAME("Iwill DK8S2 mainboard")
-};
-
diff --git a/src/mainboard/iwill/DK8S2/mptable.c b/src/mainboard/iwill/DK8S2/mptable.c
deleted file mode 100644
index 34e6037c21..0000000000
--- a/src/mainboard/iwill/DK8S2/mptable.c
+++ /dev/null
@@ -1,232 +0,0 @@
-#include <console/console.h>
-#include <arch/smp/mpspec.h>
-#include <device/pci.h>
-#include <string.h>
-#include <stdint.h>
-
-void *smp_write_config_table(void *v)
-{
-	static const char sig[4] = "PCMP";
-	static const char oem[8] = "IWILL   ";
-	static const char productid[12] = "DK8X        ";
-	struct mp_config_table *mc;
-	unsigned char bus_num;
-	unsigned char bus_isa;
-	unsigned char bus_8131_1;
-	unsigned char bus_8131_2;
-	unsigned char bus_8111_1;
-
-	mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
-	memset(mc, 0, sizeof(*mc));
-
-	memcpy(mc->mpc_signature, sig, sizeof(sig));
-	mc->mpc_length = sizeof(*mc); /* initially just the header */
-	mc->mpc_spec = 0x04;
-	mc->mpc_checksum = 0; /* not yet computed */
-	memcpy(mc->mpc_oem, oem, sizeof(oem));
-	memcpy(mc->mpc_productid, productid, sizeof(productid));
-	mc->mpc_oemptr = 0;
-	mc->mpc_oemsize = 0;
-	mc->mpc_entry_count = 0; /* No entries yet... */
-	mc->mpc_lapic = LAPIC_ADDR;
-	mc->mpe_length = 0;
-	mc->mpe_checksum = 0;
-	mc->reserved = 0;
-
-	smp_write_processors(mc);
-
-	{
-		device_t dev;
-
-		/* 8111 */
-		dev = dev_find_slot(1, PCI_DEVFN(0x03,0));
-		if (dev) {
-			bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
-			bus_isa	   = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
-			bus_isa++;
-		}
-		else {
-			printk_debug("ERROR - could not find PCI 1:03.0, using defaults\n");
-
-			bus_8111_1 = 4;
-			bus_isa = 5;
-		}
-		/* 8131-1 */
-		dev = dev_find_slot(1, PCI_DEVFN(0x01,0));
-		if (dev) {
-			bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
-
-		}
-		else {
-			printk_debug("ERROR - could not find PCI 1:01.0, using defaults\n");
-
-			bus_8131_1 = 2;
-		}
-		/* 8131-2 */
-		dev = dev_find_slot(1, PCI_DEVFN(0x02,0));
-		if (dev) {
-			bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS);
-
-		}
-		else {
-			printk_debug("ERROR - could not find PCI 1:02.0, using defaults\n");
-
-			bus_8131_2 = 3;
-		}
-	}
-
-	/* define bus and isa numbers */
-	for(bus_num = 0; bus_num < bus_isa; bus_num++) {
-		smp_write_bus(mc, bus_num, "PCI	  ");
-	}
-	smp_write_bus(mc, bus_isa, "ISA	  ");
-
-	/* IOAPIC handling */
-	smp_write_ioapic(mc, 2, 0x11, 0xfec00000);
-	{
-		device_t dev;
-		struct resource *res;
-		/* 8131 apic 3 */
-		dev = dev_find_slot(1, PCI_DEVFN(0x01,1));
-		if (dev) {
-			res = find_resource(dev, PCI_BASE_ADDRESS_0);
-			if (res) {
-				smp_write_ioapic(mc, 0x03, 0x11, res->base);
-			}
-		}
-		/* 8131 apic 4 */
-		dev = dev_find_slot(1, PCI_DEVFN(0x02,1));
-		if (dev) {
-			res = find_resource(dev, PCI_BASE_ADDRESS_0);
-			if (res) {
-				smp_write_ioapic(mc, 0x04, 0x11, res->base);
-			}
-		}
-	}
-
-	/* ISA backward compatibility interrupts  */
-	smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
-		bus_isa, 0x00, 0x02, 0x00);
-	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
-		bus_isa, 0x01, 0x02, 0x01);
-	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
-		bus_isa, 0x00, 0x02, 0x02);
-	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
-		bus_isa, 0x03, 0x02, 0x03);
-	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
-		bus_isa, 0x04, 0x02, 0x04);
-	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
-		bus_isa, 0x05, 0x02, 0x05);
-	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
-		bus_isa, 0x06, 0x02, 0x06);
-	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
-		bus_isa, 0x07, 0x02, 0x07);
-	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
-		bus_isa, 0x08, 0x02, 0x08);
-	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
-		bus_isa, 0x09, 0x02, 0x09);
-	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
-		bus_isa, 0x0a, 0x02, 0x0a);
-	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
-		bus_isa, 0x0b, 0x02, 0x0b);
-	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
-		bus_isa, 0x0c, 0x02, 0x0c);
-	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
-		bus_isa, 0x0d, 0x02, 0x0d);
-	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
-		bus_isa, 0x0e, 0x02, 0x0e);
-	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
-		bus_isa, 0x0f, 0x02, 0x0f);
-
-	/* Standard local interrupt assignments */
-	smp_write_lintsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
-		bus_isa, 0x00, MP_APIC_ALL, 0x00);
-	smp_write_lintsrc(mc, mp_NMI, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
-		bus_isa, 0x00, MP_APIC_ALL, 0x01);
-
-
-	/* PCI Slot 1 */
-	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
-		bus_8131_2, (1<<2)|0, 0x02, 0x11);
-	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
-		bus_8131_2, (1<<2)|1, 0x02, 0x12);
-	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
-		bus_8131_2, (1<<2)|2, 0x02, 0x13);
-	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
-		bus_8131_2, (1<<2)|3, 0x02, 0x10);
-
-	/* PCI Slot 2 */
-	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
-		bus_8131_2, (2<<2)|0, 0x02, 0x12);
-	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
-		bus_8131_2, (2<<2)|1, 0x02, 0x13);
-	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
-		bus_8131_2, (2<<2)|2, 0x02, 0x10);
-	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
-		bus_8131_2, (2<<2)|3, 0x02, 0x11);
-
-	/* PCI Slot 3 */
-	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
-		bus_8131_1, (1<<2)|0, 0x02, 0x11);
-	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
-		bus_8131_1, (1<<2)|1, 0x02, 0x12);
-	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
-		bus_8131_1, (1<<2)|2, 0x02, 0x13);
-	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
-		bus_8131_1, (1<<2)|3, 0x02, 0x10);
-
-	/* PCI Slot 4 */
-	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
-		bus_8131_1, (2<<2)|0, 0x02, 0x12);
-	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
-		bus_8131_1, (2<<2)|1, 0x02, 0x13);
-	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
-		bus_8131_1, (2<<2)|2, 0x02, 0x10);
-	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
-		bus_8131_1, (2<<2)|3, 0x02, 0x11);
-
-	/* PCI Slot 5 */
-#warning "FIXME get the irqs right, it's just hacked to work for now"
-	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
-		bus_8111_1, (5<<2)|0, 0x02, 0x11);
-	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
-		bus_8111_1, (5<<2)|1, 0x02, 0x12);
-	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
-		bus_8111_1, (5<<2)|2, 0x02, 0x13);
-	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
-		bus_8111_1, (5<<2)|3, 0x02, 0x10);
-
-	/* PCI Slot 6 */
-#warning "FIXME get the irqs right, it's just hacked to work for now"
-	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
-		bus_8111_1, (4<<2)|0, 0x02, 0x10);
-	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
-		bus_8111_1, (4<<2)|1, 0x02, 0x11);
-	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
-		bus_8111_1, (4<<2)|2, 0x02, 0x12);
-	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
-		bus_8111_1, (4<<2)|3, 0x02, 0x13);
-
-	/* On board nics */
-	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
-		bus_8131_1, (3<<2)|0, 0x02, 0x13);
-	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
-		bus_8131_1, (4<<2)|0, 0x02, 0x13);
-
-	/* There is no extension information... */
-
-	/* Compute the checksums */
-	mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length);
-	mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length);
-	printk_debug("Wrote the mp table end at: %p - %p\n",
-		mc, smp_next_mpe_entry(mc));
-	return smp_next_mpe_entry(mc);
-}
-
-unsigned long write_smp_table(unsigned long addr)
-{
-	void *v;
-	v = smp_write_floating_table(addr);
-	return (unsigned long)smp_write_config_table(v);
-}
-
diff --git a/src/mainboard/iwill/DK8S2/reset.c b/src/mainboard/iwill/DK8S2/reset.c
deleted file mode 100644
index 3db3956ec6..0000000000
--- a/src/mainboard/iwill/DK8S2/reset.c
+++ /dev/null
@@ -1,6 +0,0 @@
-#include "../../../southbridge/amd/amd8111/amd8111_reset.c"
-
-void hard_reset(void)
-{
-	amd8111_hard_reset(0, 0);
-}