haswell: unify romstage logic

This commit pulls in all the common logic for romstage into
the Haswell cpu directory. The bits specific to the mainboard
still reside under their respective directories. The calling
sequence bounces from the cpu directory to mainboard then back
to the cpu directory. The reasoning is that Haswell systems use
cache-as-ram for backing memory in romstage. The stack is used to
allocate structures. However, now changes can be made to the
romstage for Haswell and apply to all boards.

Change-Id: I2bf08013c46a99235ffe4bde88a935c3378eb341
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/2754
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>

1 files changed, 9 insertions, 126 deletions

diff --git a/src/mainboard/intel/wtm2/romstage.c b/src/mainboard/intel/wtm2/romstage.c
index a4a42d3f70..440b35f4fe 100644
--- a/src/mainboard/intel/wtm2/romstage.c
+++ b/src/mainboard/intel/wtm2/romstage.c
@@ -19,30 +19,13 @@
  */
 
 #include <stdint.h>
-#include <string.h>
-#include <lib.h>
-#include <timestamp.h>
-#include <arch/io.h>
-#include <arch/romcc_io.h>
-#include <device/pci_def.h>
-#include <device/pnp_def.h>
-#include <cpu/x86/lapic.h>
-#include <pc80/mc146818rtc.h>
-#include <cbmem.h>
 #include <console/console.h>
 #include "cpu/intel/haswell/haswell.h"
 #include "northbridge/intel/haswell/haswell.h"
 #include "northbridge/intel/haswell/raminit.h"
-#include "southbridge/intel/lynxpoint/me.h"
 #include "southbridge/intel/lynxpoint/pch.h"
 #include "southbridge/intel/lynxpoint/lp_gpio.h"
-#include <arch/cpu.h>
-#include <cpu/x86/bist.h>
-#include <cpu/x86/msr.h>
 #include "gpio.h"
-#if CONFIG_CHROMEOS
-#include <vendorcode/google/chromeos/chromeos.h>
-#endif
 
 const struct rcba_config_instruction rcba_config[] = {
 
@@ -88,21 +71,8 @@ const struct rcba_config_instruction rcba_config[] = {
 	RCBA_END_CONFIG,
 };
 
-void romstage_main(unsigned long bist)
+void mainboard_romstage_entry(unsigned long bist)
 {
-	int boot_mode = 0;
-	int wake_from_s3;
-	int cbmem_was_initted;
-
-#if CONFIG_COLLECT_TIMESTAMPS
-	tsc_t start_romstage_time;
-	tsc_t before_dram_time;
-	tsc_t after_dram_time;
-	tsc_t base_time = {
-		.lo = pci_read_config32(PCI_DEV(0, 0x00, 0), 0xdc),
-		.hi = pci_read_config32(PCI_DEV(0, 0x1f, 2), 0xd0)
-	};
-#endif
 	struct pei_data pei_data = {
 		pei_version: PEI_VERSION,
 		mchbar: DEFAULT_MCHBAR,
@@ -146,100 +116,13 @@ void romstage_main(unsigned long bist)
 		},
 	};
 
-#if CONFIG_COLLECT_TIMESTAMPS
-	start_romstage_time = rdtsc();
-#endif
-
-	if (bist == 0)
-		enable_lapic();
-
-	wake_from_s3 = early_pch_init(&mainboard_gpio_map, &rcba_config[0]);
-
-	/* Halt if there was a built in self test failure */
-	report_bist_failure(bist);
-
-	/* Perform some early chipset initialization required
-	 * before RAM initialization can work
-	 */
-	haswell_early_initialization(HASWELL_MOBILE);
-	printk(BIOS_DEBUG, "Back from haswell_early_initialization()\n");
-
-	if (wake_from_s3) {
-#if CONFIG_HAVE_ACPI_RESUME
-		printk(BIOS_DEBUG, "Resume from S3 detected.\n");
-		boot_mode = 2;
-#else
-		printk(BIOS_DEBUG, "Resume from S3 detected, but disabled.\n");
-#endif
-	}
-
-	/* Prepare USB controller early in S3 resume */
-	if (boot_mode == 2)
-		enable_usb_bar();
-
-	post_code(0x3a);
-	pei_data.boot_mode = boot_mode;
-#if CONFIG_COLLECT_TIMESTAMPS
-	before_dram_time = rdtsc();
-#endif
-
-	report_platform_info();
-
-	sdram_initialize(&pei_data);
-
-#if CONFIG_COLLECT_TIMESTAMPS
-	after_dram_time = rdtsc();
-#endif
-	post_code(0x3b);
-
-	intel_early_me_status();
-
-	quick_ram_check();
-	post_code(0x3e);
-
-	MCHBAR16(SSKPD) = 0xCAFE;
-#if CONFIG_EARLY_CBMEM_INIT
-	cbmem_was_initted = !cbmem_initialize();
-#else
-	cbmem_was_initted = cbmem_reinit((uint64_t) (get_top_of_ram()
-						     - HIGH_MEMORY_SIZE));
-#endif
-
-#if CONFIG_HAVE_ACPI_RESUME
-	/* If there is no high memory area, we didn't boot before, so
-	 * this is not a resume. In that case we just create the cbmem toc.
-	 */
-
-	*(u32 *)CBMEM_BOOT_MODE = 0;
-	*(u32 *)CBMEM_RESUME_BACKUP = 0;
+	struct romstage_params romstage_params = {
+		.pei_data = &pei_data,
+		.gpio_map = &mainboard_gpio_map,
+		.rcba_config = &rcba_config[0],
+		.bist = bist,
+	};
 
-	if ((boot_mode == 2) && cbmem_was_initted) {
-		void *resume_backup_memory = cbmem_find(CBMEM_ID_RESUME);
-		if (resume_backup_memory) {
-			*(u32 *)CBMEM_BOOT_MODE = boot_mode;
-			*(u32 *)CBMEM_RESUME_BACKUP = (u32)resume_backup_memory;
-		}
-		/* Magic for S3 resume */
-		pci_write_config32(PCI_DEV(0, 0x00, 0), SKPAD, 0xcafed00d);
-	} else if (boot_mode == 2) {
-		/* Failed S3 resume, reset to come up cleanly */
-		outb(0x6, 0xcf9);
-		while (1) {
-			hlt();
-		}
-	} else {
-		pci_write_config32(PCI_DEV(0, 0x00, 0), SKPAD, 0xcafebabe);
-	}
-#endif
-	post_code(0x3f);
-#if CONFIG_CHROMEOS
-	init_chromeos(boot_mode);
-#endif
-#if CONFIG_COLLECT_TIMESTAMPS
-	timestamp_init(base_time);
-	timestamp_add(TS_START_ROMSTAGE, start_romstage_time );
-	timestamp_add(TS_BEFORE_INITRAM, before_dram_time );
-	timestamp_add(TS_AFTER_INITRAM, after_dram_time );
-	timestamp_add_now(TS_END_ROMSTAGE);
-#endif
+	/* Call into the real romstage main with this board's attributes. */
+	romstage_common(&romstage_params);
 }