haswell/lynxpoint: Use new PCH/PM helper functions

This makes use of the new functions from pmutil.c that take
care of the differences between -H and -LP chipsets.

It also adds support for the LynxPoint-LP GPE0 register block
and the SMI/SCI routing differences.

The FADT is updated to report the new 256 byte GPE0 block on
wtm2/wtm2 boards which is too big for the 64bit X_GPE0 address
block so that part is zeroed to prevent IASL and the kernel
from complaining about a mismatch.

This was tested on WTM2.  Unfortunately I am still unable to get an
SCI delivered from the EC but I suspect that is due to a magic
command needed to put the EC in ACPI mode.  Instead I verified that
all of the power management and GPIO registers were set to expected
values.

I also tested transitions into S3 and S5 from both the kernel and
by pressing the power button at the developer mode screen and they
all function as expected.

Change-Id: Ice9e798ea5144db228349ce90540745c0780b20a
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/2816
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>

2 files changed, 11 insertions, 12 deletions

diff --git a/src/mainboard/intel/wtm1/devicetree.cb b/src/mainboard/intel/wtm1/devicetree.cb
index db7c9988c7..be4fe51b41 100644
--- a/src/mainboard/intel/wtm1/devicetree.cb
+++ b/src/mainboard/intel/wtm1/devicetree.cb
@@ -41,12 +41,11 @@ chip northbridge/intel/haswell
 			register "pirqg_routing" = "0x80"
 			register "pirqh_routing" = "0x80"
 
-			# GPI routing
-			#  0 No effect (default)
-			#  1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set)
-			#  2 SCI (if corresponding GPIO_EN bit is also set)
 			register "alt_gp_smi_en" = "0x0000"
-			register "gpe0_en" = "0x0000"
+			register "gpe0_en_1" = "0x00000000"
+			register "gpe0_en_2" = "0x00000000"
+			register "gpe0_en_3" = "0x00000000"
+			register "gpe0_en_4" = "0x00000000"
 
 			register "ide_legacy_combined" = "0x0"
 			register "sata_ahci" = "0x1"
diff --git a/src/mainboard/intel/wtm1/fadt.c b/src/mainboard/intel/wtm1/fadt.c
index 510b765e96..7afbbfa698 100644
--- a/src/mainboard/intel/wtm1/fadt.c
+++ b/src/mainboard/intel/wtm1/fadt.c
@@ -21,12 +21,12 @@
 #include <device/pci.h>
 #include <arch/acpi.h>
 #include <cpu/x86/smm.h>
+#include <southbridge/intel/lynxpoint/pch.h>
 
 void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt)
 {
 	acpi_header_t *header = &(fadt->header);
-	u16 pmbase = pci_read_config16(dev_find_slot(0, PCI_DEVFN(0x1f,0)),
-								0x40) & 0xfffe;
+	u16 pmbase = get_pmbase();
 
 	memset((void *) fadt, 0, sizeof(acpi_fadt_t));
 	memcpy(header->signature, "FACP", 4);
@@ -55,14 +55,14 @@ void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt)
 	fadt->pm1b_cnt_blk = 0x0;
 	fadt->pm2_cnt_blk = pmbase + 0x50;
 	fadt->pm_tmr_blk = pmbase + 0x8;
-	fadt->gpe0_blk = pmbase + 0x20;
+	fadt->gpe0_blk = pmbase + 0x80;
 	fadt->gpe1_blk = 0;
 
 	fadt->pm1_evt_len = 4;
 	fadt->pm1_cnt_len = 2;
 	fadt->pm2_cnt_len = 1;
 	fadt->pm_tmr_len = 4;
-	fadt->gpe0_blk_len = 16;
+	fadt->gpe0_blk_len = 32;
 	fadt->gpe1_blk_len = 0;
 	fadt->gpe1_base = 0;
 	fadt->cst_cnt = 0;
@@ -137,11 +137,11 @@ void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt)
 	fadt->x_pm_tmr_blk.addrl = pmbase + 0x8;
 	fadt->x_pm_tmr_blk.addrh = 0x0;
 
-	fadt->x_gpe0_blk.space_id = 1;
-	fadt->x_gpe0_blk.bit_width = 64;
+	fadt->x_gpe0_blk.space_id = 0;
+	fadt->x_gpe0_blk.bit_width = 0;
 	fadt->x_gpe0_blk.bit_offset = 0;
 	fadt->x_gpe0_blk.resv = 0;
-	fadt->x_gpe0_blk.addrl = pmbase + 0x20;
+	fadt->x_gpe0_blk.addrl = 0;
 	fadt->x_gpe0_blk.addrh = 0x0;
 
 	fadt->x_gpe1_blk.space_id = 1;