intel/dcp847ske: Add Intel NUC DCP847SKE

https://ark.intel.com/products/71620/Intel-NUC-Board-DCP847SKE

Created using autoport and manual edits.
mainboard_fill_pei_data copied and adjusted from samsung/lumpy.

Tested:
- RAM slots with 2x4GB Kingston KVR1333D3S9/4G (DDR3-1333 1.5V).
- RAM slots with 2x4GB Kingston KVR16LS11/4G (DDR3L-1600 1.35V).
- SeaBIOS stable payload.
- Linux 4.13.14 payload.
- Booting into Linux 4.13.14 with Debian/unstable installed on the
  internal mSATA slot.
- Non-native raminit (works).
- Native raminit
  - KVR1333D3S9 doesn't work.
  - KVR16LS11 only works at 1.5V.
- Native VGA init, HDMI port detection with libgfxinit.
- Basic ACPI functions (power button event; power-off; reboot).
- Suspend to RAM and resume works.
- PCIe WLAN in half-minicard slot.
- USB device in half-minicard slot.
- PCIe device in full-minicard slot.
- mSATA device in full-minicard slot.
- Fan spins up/down in response to CPU load.

Known issues:
- Native raminit fails timC calibration with the RAM I have.
- Technical Product Specification mentions overcurrent protection
  for back panel and front panel USB connectors, but I haven't
  been able to trigger it with either native fw or coreboot
  (tried up to 2.5A load).

Untested:
- USB debug port.

Change-Id: I6e210310f55c051eaf61e0698fed855eda5d7d90
Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de>
Reviewed-on: https://review.coreboot.org/22683
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>

1 files changed, 69 insertions, 0 deletions

diff --git a/src/mainboard/intel/dcp847ske/romstage.c b/src/mainboard/intel/dcp847ske/romstage.c
new file mode 100644
index 0000000000..ad31bba5ab
--- /dev/null
+++ b/src/mainboard/intel/dcp847ske/romstage.c
@@ -0,0 +1,69 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2010 coresystems GmbH
+ * Copyright (C) 2011 The ChromiumOS Authors.  All rights reserved.
+ * Copyright (C) 2017 Tobias Diedrich <ranma+coreboot@tdiedrich.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <stdint.h>
+#include <northbridge/intel/sandybridge/sandybridge.h>
+#if IS_ENABLED(CONFIG_USE_NATIVE_RAMINIT)
+#include <northbridge/intel/sandybridge/raminit_native.h>
+#else
+#include <northbridge/intel/sandybridge/raminit.h>
+#endif
+
+#if !IS_ENABLED(CONFIG_USE_NATIVE_RAMINIT)
+void mainboard_fill_pei_data(struct pei_data *pei_data)
+{
+	struct pei_data pei_data_template = {
+		.pei_version = PEI_VERSION,
+		.mchbar = (uintptr_t)DEFAULT_MCHBAR,
+		.dmibar = (uintptr_t)DEFAULT_DMIBAR,
+		.epbar = DEFAULT_EPBAR,
+		.pciexbar = CONFIG_MMCONF_BASE_ADDRESS,
+		.smbusbar = SMBUS_IO_BASE,
+		.wdbbar = 0x4000000,
+		.wdbsize = 0x1000,
+		.hpet_address = CONFIG_HPET_ADDRESS,
+		.rcba = (uintptr_t)DEFAULT_RCBABASE,
+		.pmbase = DEFAULT_PMBASE,
+		.gpiobase = DEFAULT_GPIOBASE,
+		.thermalbase = 0xfed08000,
+		.system_type = 0, // 0 Mobile, 1 Desktop/Server
+		.tseg_size = CONFIG_SMM_TSEG_SIZE,
+		.spd_addresses = { 0xa0, 0x00, 0xa2, 0x00 },
+		.ts_addresses = { 0x00, 0x00, 0x00, 0x00 },
+		.ec_present = 0,
+		.gbe_enable = 1,
+		// 0 = leave channel enabled
+		// 1 = disable dimm 0 on channel
+		// 2 = disable dimm 1 on channel
+		// 3 = disable dimm 0+1 on channel
+		.dimm_channel0_disabled = 2,
+		.dimm_channel1_disabled = 2,
+		.max_ddr3_freq = 1333,
+		.usb_port_config = {
+#define USB_CONFIG(enabled, current, ocpin) { enabled, ocpin, 0x040 * current }
+#include "usb.h"
+		},
+	};
+	*pei_data = pei_data_template;
+}
+
+int mainboard_should_reset_usb(int s3resume)
+{
+	return !s3resume;
+}
+#endif