intel/dcp847ske: Add Intel NUC DCP847SKE

https://ark.intel.com/products/71620/Intel-NUC-Board-DCP847SKE

Created using autoport and manual edits.
mainboard_fill_pei_data copied and adjusted from samsung/lumpy.

Tested:
- RAM slots with 2x4GB Kingston KVR1333D3S9/4G (DDR3-1333 1.5V).
- RAM slots with 2x4GB Kingston KVR16LS11/4G (DDR3L-1600 1.35V).
- SeaBIOS stable payload.
- Linux 4.13.14 payload.
- Booting into Linux 4.13.14 with Debian/unstable installed on the
  internal mSATA slot.
- Non-native raminit (works).
- Native raminit
  - KVR1333D3S9 doesn't work.
  - KVR16LS11 only works at 1.5V.
- Native VGA init, HDMI port detection with libgfxinit.
- Basic ACPI functions (power button event; power-off; reboot).
- Suspend to RAM and resume works.
- PCIe WLAN in half-minicard slot.
- USB device in half-minicard slot.
- PCIe device in full-minicard slot.
- mSATA device in full-minicard slot.
- Fan spins up/down in response to CPU load.

Known issues:
- Native raminit fails timC calibration with the RAM I have.
- Technical Product Specification mentions overcurrent protection
  for back panel and front panel USB connectors, but I haven't
  been able to trigger it with either native fw or coreboot
  (tried up to 2.5A load).

Untested:
- USB debug port.

Change-Id: I6e210310f55c051eaf61e0698fed855eda5d7d90
Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de>
Reviewed-on: https://review.coreboot.org/22683
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>

1 files changed, 92 insertions, 0 deletions

diff --git a/src/mainboard/intel/dcp847ske/Kconfig b/src/mainboard/intel/dcp847ske/Kconfig
new file mode 100644
index 0000000000..1fd3d8cc80
--- /dev/null
+++ b/src/mainboard/intel/dcp847ske/Kconfig
@@ -0,0 +1,92 @@
+if BOARD_INTEL_DCP847SKE
+
+config BOARD_SPECIFIC_OPTIONS # dummy
+	def_bool y
+	select BOARD_ROMSIZE_KB_8192
+	select CPU_INTEL_SOCKET_RPGA989
+	select SUPERIO_NUVOTON_NCT6776
+	select HAVE_ACPI_RESUME
+	select HAVE_ACPI_TABLES
+	select NORTHBRIDGE_INTEL_SANDYBRIDGE
+	select SOUTHBRIDGE_INTEL_C216
+	select SERIRQ_CONTINUOUS_MODE
+	select INTEL_INT15
+	select MAINBOARD_HAS_LIBGFXINIT
+
+menu "Debugging"
+
+config DISABLE_UART_ON_TESTPADS
+	bool "Disable UART on testpads"
+	default y
+	select NO_UART_ON_SUPERIO
+	help
+	  Serial output requires soldering to the testpad next to
+	  NCT5577D pin 18 (txd) and gnd.
+
+endmenu
+
+config HAVE_IFD_BIN
+	bool
+	default n
+
+config HAVE_ME_BIN
+	bool
+	default n
+
+config MAINBOARD_DIR
+	string
+	default intel/dcp847ske
+
+config MAINBOARD_PART_NUMBER
+	string
+	default "Intel NUC DCP847SKE"
+
+config VGA_BIOS_FILE
+	string
+	default "pci8086,0106.rom"
+
+config VGA_BIOS_ID
+	string
+	default "8086,0106"
+
+config MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
+	hex
+	default 0x2044
+
+config MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
+	hex
+	default 0x8086
+
+config MAX_CPUS
+	int
+	default 2
+
+config USBDEBUG_HCD_INDEX
+	int
+	default 2
+
+config IFD_GBE_SECTION
+	string
+	default "0x00001000:0x00002fff"
+
+config IFD_ME_SECTION
+	string
+	default "0x00003000:0x001bffff"
+
+config IFD_BIOS_SECTION
+	string
+	default "0x001c0000:0x007fffff"
+
+config CBFS_SIZE
+	hex
+	default 0x00640000
+
+config MAINBOARD_SMBIOS_MANUFACTURER
+	string
+	default "Intel Corporation"
+
+config MAINBOARD_SMBIOS_PRODUCT_NAME
+	string
+	default "DCP847SKE"
+
+endif # BOARD_INTEL_DCP847SKE