preliminary Intel D945GCLF Atom+i945 support.

ram init fails, as the i945 driver currently only supports the mobile version
of the chipset..

Not sure how much sense it makes to check this in, but since it's a nice and
cheap board, maybe someone wants to work on this.

Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4879 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

1 files changed, 115 insertions, 0 deletions

diff --git a/src/mainboard/intel/d945gclf/devicetree.cb b/src/mainboard/intel/d945gclf/devicetree.cb
new file mode 100644
index 0000000000..40fc3497d6
--- /dev/null
+++ b/src/mainboard/intel/d945gclf/devicetree.cb
@@ -0,0 +1,115 @@
+##
+## This file is part of the coreboot project.
+## 
+## Copyright (C) 2007-2008 coresystems GmbH
+##
+## This program is free software; you can redistribute it and/or
+## modify it under the terms of the GNU General Public License as
+## published by the Free Software Foundation; version 2 of
+## the License.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+## MA 02110-1301 USA
+##
+
+chip northbridge/intel/i945
+
+        device apic_cluster 0 on
+                chip cpu/intel/socket_441
+                        device apic 0 on end
+                end
+        end
+
+        device pci_domain 0 on 
+                device pci 00.0 on end # host bridge
+		device pci 01.0 off end # i945 PCIe root port
+		chip drivers/pci/onboard
+			device pci 02.0 on end # vga controller
+			# register "rom_address" = "0xfffc0000"	# 256 KB image
+			# register "rom_address" = "0xfff80000"	# 512 KB image
+			# register "rom_address" = "0xfff00000" # 1 MB image
+		end
+		device pci 02.1 on end # display controller
+
+                chip southbridge/intel/i82801gx
+			register "pirqa_routing" = "0x05"
+			register "pirqb_routing" = "0x07"
+			register "pirqc_routing" = "0x05"
+			register "pirqd_routing" = "0x07"
+			register "pirqe_routing" = "0x80"
+			register "pirqf_routing" = "0x80"
+			register "pirqg_routing" = "0x80"
+			register "pirqh_routing" = "0x06"
+
+			# GPI routing
+			#  0 No effect (default)
+			#  1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set)
+			#  2 SCI (if corresponding GPIO_EN bit is also set)
+			register "gpi13_routing" = "1"
+			register "gpe0_en" = "0x20000601"
+
+                        register "ide_legacy_combined" = "0x1"
+                        register "ide_enable_primary" = "0x1"
+                        register "ide_enable_secondary" = "0x0"
+                        register "sata_ahci" = "0x0"
+
+                	device pci 1b.0 on end # High Definition Audio
+                	device pci 1c.0 on end # PCIe
+                	device pci 1c.1 on end # PCIe
+                	device pci 1c.2 on end # PCIe
+			#device pci 1c.3 off end # PCIe port 4
+			#device pci 1c.4 off end # PCIe port 5
+			#device pci 1c.5 off end # PCIe port 6
+                	device pci 1d.0 on end # USB UHCI
+                	device pci 1d.1 on end # USB UHCI
+                	device pci 1d.2 on end # USB UHCI
+                	device pci 1d.3 on end # USB UHCI
+                	device pci 1d.7 on end # USB2 EHCI
+                	device pci 1e.0 on end # PCI bridge
+			#device pci 1e.2 off end # AC'97 Audio 
+			#device pci 1e.3 off end # AC'97 Modem
+                        device pci 1f.0 on # LPC bridge
+                                chip superio/smsc/lpc47m15x
+					device pnp 2e.0 off		# Floppy
+					end
+					device pnp 2e.3 off		# Parport
+					end
+                                        device pnp 2e.4 on
+                                                 io 0x60 = 0x3f8
+                                                irq 0x70 = 4
+                                        end
+                                        device pnp 2e.5 on
+                                                 io 0x60 = 0x2f8
+                                                irq 0x70 = 3
+						irq 0xf1 = 4 # set IRMODE 0 # XXX not an irq
+                                        end
+					device pnp 2e.7 on		# Keyboard+Mouse
+						 io 0x60 = 0x60
+						 io 0x62 = 0x64
+						irq 0x70 = 1
+						irq 0x72 = 12
+						irq 0xf0 = 0x82		# HW accel A20.
+					end
+					device pnp 2e.8 on		# GAME
+						# all default
+					end
+					device pnp 2e.a on		# PME
+					end
+					device pnp 2e.b on		# MPU
+					end
+                                end
+                        end
+			#device pci 1f.1 off end # IDE
+                        device pci 1f.2 on end  # SATA
+                        device pci 1f.3 on end  # SMBus
+			#device pci 1f.4 off end # Realtek ID Codec
+                end
+        end
+end