src/mb/hp/abm: Switch away from ROMCC_BOOTBLOCK

Warning: not tested on hardware.

Signed-off-by: Mike Banon <mikebdp2@gmail.com>
Change-Id: Ifb50fd22f5ef4db204a3427e03430177cad211cd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38866
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>

1 files changed, 0 insertions, 58 deletions

diff --git a/src/mainboard/hp/abm/romstage.c b/src/mainboard/hp/abm/romstage.c
deleted file mode 100644
index 5092e1772f..0000000000
--- a/src/mainboard/hp/abm/romstage.c
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2012 Advanced Micro Devices, Inc.
- * Copyright (C) 2014 Sage Electronic Engineering, LLC
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <amdblocks/acpimmio.h>
-#include <arch/io.h>
-#include <device/pci_ops.h>
-#include <northbridge/amd/agesa/state_machine.h>
-#include <southbridge/amd/agesa/hudson/hudson.h>
-#include <amdblocks/acpimmio.h>
-#include <superio/nuvoton/common/nuvoton.h>
-#include <superio/nuvoton/nct5104d/nct5104d.h>
-
-#define SERIAL_DEV PNP_DEV(0x4E, NCT5104D_SP4)
-
-void board_BeforeAgesa(struct sysinfo *cb)
-{
-	u32 t32;
-
-	/* For serial port option, plug-in card on LPC. */
-	pci_devfn_t dev = PCI_DEV(0, 0x14, 3);
-	pci_write_config32(dev, 0x44, 0xff03ffd5);
-
-	/* In Hudson RRG, PMIOxD2[5:4] is "Drive strength control for
-	 *  LpcClk[1:0]".  To be consistent with Parmer, setting to 4mA
-	 *  even though the register is not documented in the Kabini BKDG.
-	 *  Otherwise the serial output is bad code.
-	 */
-	pm_io_write8(0xd2, 0);
-
-	/* Enable the AcpiMmio space */
-	pm_io_write8(0x24, 1);
-
-	/* Set auxiliary output clock frequency on OSCOUT1 pin to be 25MHz */
-	/* Set auxiliary output clock frequency on OSCOUT2 pin to be 48MHz */
-	t32 = misc_read32(0x28);
-	t32 &= 0xffc0ffff; // Clr bits [21:19] & [18:16]
-	t32 |= 0x00010000; // Set bit 16 for 25MHz
-	misc_write(0x28, t32);
-
-	/* Enable Auxiliary OSCOUT1/OSCOUT2 */
-	t32 = misc_write32(0x40, misc_read32(0x40) & 0xffffff7b);
-
-	nct5104d_enable_uartd(SERIAL_DEV);
-	nuvoton_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
-}