mb/**/{devicetree,overridetree}.cb: Indent with tabs

Use tabs instead of eight (sometimes less) spaces.

Change-Id: Ic3d61f5210d21d9613fc50b47b90af71f544169a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44113
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>

11 files changed, 115 insertions, 115 deletions

diff --git a/src/mainboard/google/dedede/variants/waddledoo/overridetree.cb b/src/mainboard/google/dedede/variants/waddledoo/overridetree.cb
index a37d2e7b74..3943882812 100644
--- a/src/mainboard/google/dedede/variants/waddledoo/overridetree.cb
+++ b/src/mainboard/google/dedede/variants/waddledoo/overridetree.cb
@@ -147,12 +147,12 @@ chip soc/intel/jasperlake
 				device i2c 1a on end
 			end
 		end #I2C 4
-                device pci 1f.3 on
-                        chip drivers/generic/max98357a
-                                register "hid" = ""MX98360A""
+		device pci 1f.3 on
+			chip drivers/generic/max98357a
+				register "hid" = ""MX98360A""
 				register "sdmode_gpio" =  "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D17)"
-                                device generic 0 on end
-                        end
-                end # Intel HDA
+				device generic 0 on end
+			end
+		end # Intel HDA
 	end
 end
diff --git a/src/mainboard/google/hatch/variants/helios/overridetree.cb b/src/mainboard/google/hatch/variants/helios/overridetree.cb
index 34d235856e..4241a46640 100644
--- a/src/mainboard/google/hatch/variants/helios/overridetree.cb
+++ b/src/mainboard/google/hatch/variants/helios/overridetree.cb
@@ -36,7 +36,7 @@ chip soc/intel/cannonlake
 			.speed = I2C_SPEED_FAST,
 			.rise_time_ns = 50,
 			.fall_time_ns = 15,
-		        .data_hold_time_ns = 330,
+			.data_hold_time_ns = 330,
 		},
 		.i2c[1] = {
 			.speed = I2C_SPEED_FAST,
diff --git a/src/mainboard/google/hatch/variants/helios_diskswap/overridetree.cb b/src/mainboard/google/hatch/variants/helios_diskswap/overridetree.cb
index 6accd0cc92..6fbe95058f 100644
--- a/src/mainboard/google/hatch/variants/helios_diskswap/overridetree.cb
+++ b/src/mainboard/google/hatch/variants/helios_diskswap/overridetree.cb
@@ -52,7 +52,7 @@ chip soc/intel/cannonlake
 			.speed = I2C_SPEED_FAST,
 			.rise_time_ns = 50,
 			.fall_time_ns = 15,
-		        .data_hold_time_ns = 330,
+			.data_hold_time_ns = 330,
 		},
 		.i2c[1] = {
 			.speed = I2C_SPEED_FAST,
diff --git a/src/mainboard/google/hatch/variants/palkia/overridetree.cb b/src/mainboard/google/hatch/variants/palkia/overridetree.cb
index 73cf0f21b9..8cdb2a9fb3 100644
--- a/src/mainboard/google/hatch/variants/palkia/overridetree.cb
+++ b/src/mainboard/google/hatch/variants/palkia/overridetree.cb
@@ -29,7 +29,7 @@ chip soc/intel/cannonlake
 	#+-------------------+---------------------------+
 	#| I2C0		     | Trackpad			 |
 	#| I2C1		     | Touchscreen		 |
-	#| I2C2              | 2nd Touchscreen	         |
+	#| I2C2              | 2nd Touchscreen		 |
 	#| I2C4		     | Audio			 |
 	#+-------------------+---------------------------+
 	register "common_soc_config" = "{
@@ -37,7 +37,7 @@ chip soc/intel/cannonlake
 			.speed = I2C_SPEED_FAST,
 			.rise_time_ns = 50,
 			.fall_time_ns = 15,
-		        .data_hold_time_ns = 330,
+			.data_hold_time_ns = 330,
 		},
 		.i2c[1] = {
 			.speed = I2C_SPEED_FAST,
diff --git a/src/mainboard/google/octopus/variants/bloog/overridetree.cb b/src/mainboard/google/octopus/variants/bloog/overridetree.cb
index 0212bea46d..6c2aa95747 100644
--- a/src/mainboard/google/octopus/variants/bloog/overridetree.cb
+++ b/src/mainboard/google/octopus/variants/bloog/overridetree.cb
@@ -41,44 +41,44 @@ chip soc/intel/apollolake
 	# [6:0] Rx Strobe Delay DLL 2(HS400 Mode), each 125ps.
 	register "emmc_rx_strobe_cntl" = "0x0b0b"
 
-        # Intel Common SoC Config
-        #+-------------------+---------------------------+
-        #| Field             |  Value                    |
-        #+-------------------+---------------------------+
-        #| GSPI0             | cr50 TPM. Early init is   |
-        #|                   | required to set up a BAR  |
-        #|                   | for TPM communication     |
-        #|                   | before memory is up       |
-        #| I2C5              | Audio                     |
-        #| I2C6              | Trackpad                  |
-        #| I2C7              | Touchscreen               |
-        #+-------------------+---------------------------+
+	# Intel Common SoC Config
+	#+-------------------+---------------------------+
+	#| Field             |  Value                    |
+	#+-------------------+---------------------------+
+	#| GSPI0             | cr50 TPM. Early init is   |
+	#|                   | required to set up a BAR  |
+	#|                   | for TPM communication     |
+	#|                   | before memory is up       |
+	#| I2C5              | Audio                     |
+	#| I2C6              | Trackpad                  |
+	#| I2C7              | Touchscreen               |
+	#+-------------------+---------------------------+
 
-        register "tcc_offset" = "10"
+	register "tcc_offset" = "10"
 
-        register "common_soc_config" = "{
-                .gspi[0] = {
-                        .speed_mhz = 1,
-                        .early_init = 1,
-                },
-                .i2c[5] = {
-                        .speed = I2C_SPEED_FAST,
-                        .rise_time_ns = 104,
-                        .fall_time_ns = 52,
-                },
-                .i2c[6] = {
-                        .speed = I2C_SPEED_FAST,
-                        .rise_time_ns = 66,
-                        .fall_time_ns = 90,
-                        .data_hold_time_ns = 350,
-                },
-                .i2c[7] = {
-                        .speed = I2C_SPEED_FAST,
-                        .rise_time_ns = 44,
-                        .fall_time_ns = 90,
-                },
+	register "common_soc_config" = "{
+		.gspi[0] = {
+			.speed_mhz = 1,
+			.early_init = 1,
+		},
+		.i2c[5] = {
+			.speed = I2C_SPEED_FAST,
+			.rise_time_ns = 104,
+			.fall_time_ns = 52,
+		},
+		.i2c[6] = {
+			.speed = I2C_SPEED_FAST,
+			.rise_time_ns = 66,
+			.fall_time_ns = 90,
+			.data_hold_time_ns = 350,
+		},
+		.i2c[7] = {
+			.speed = I2C_SPEED_FAST,
+			.rise_time_ns = 44,
+			.fall_time_ns = 90,
+		},
 
-        }"
+	}"
 
 	device domain 0 on
 		device pci 16.0 off  end     # - I2C 0
@@ -124,34 +124,34 @@ chip soc/intel/apollolake
 				register "has_power_resource" = "1"
 				device i2c 10 on end
 			end
-                        chip drivers/i2c/hid
-                                register "generic.hid" = ""GDIX0000""
-                                register "generic.desc" = ""Goodix Touchscreen""
-                                register "generic.irq" = "ACPI_IRQ_EDGE_LOW(GPIO_212_IRQ)"
-                                register "generic.probed" = "1"
-                                register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_105)"
-                                register "generic.reset_delay_ms" = "120"
-                                register "generic.reset_off_delay_ms" = "3"
-                                register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_146)"
-                                register "generic.has_power_resource" = "1"
-                                register "generic.enable_delay_ms" = "10"
-                                register "hid_desc_reg_offset" = "0x01"
-                                device i2c 5d on end
-                        end
-                        chip drivers/i2c/hid
-                               register "generic.hid" = ""GTCH7503""
-                               register "generic.desc" = ""G2TOUCH Touchscreen""
-                               register "generic.irq" = "ACPI_IRQ_EDGE_LOW(GPIO_212_IRQ)"
-                               register "generic.probed" = "1"
-                               register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_105)"
-                               register "generic.reset_delay_ms" = "50"
-                               register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_146)"
-                               register "generic.enable_delay_ms" = "1"
-                               register "generic.has_power_resource" = "1"
-                               register "generic.disable_gpio_export_in_crs" = "1"
-                               register "hid_desc_reg_offset" = "0x01"
-                               device i2c 40 on end
-                       end
+			chip drivers/i2c/hid
+				register "generic.hid" = ""GDIX0000""
+				register "generic.desc" = ""Goodix Touchscreen""
+				register "generic.irq" = "ACPI_IRQ_EDGE_LOW(GPIO_212_IRQ)"
+				register "generic.probed" = "1"
+				register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_105)"
+				register "generic.reset_delay_ms" = "120"
+				register "generic.reset_off_delay_ms" = "3"
+				register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_146)"
+				register "generic.has_power_resource" = "1"
+				register "generic.enable_delay_ms" = "10"
+				register "hid_desc_reg_offset" = "0x01"
+				device i2c 5d on end
+			end
+			chip drivers/i2c/hid
+				register "generic.hid" = ""GTCH7503""
+				register "generic.desc" = ""G2TOUCH Touchscreen""
+				register "generic.irq" = "ACPI_IRQ_EDGE_LOW(GPIO_212_IRQ)"
+				register "generic.probed" = "1"
+				register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_105)"
+				register "generic.reset_delay_ms" = "50"
+				register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_146)"
+				register "generic.enable_delay_ms" = "1"
+				register "generic.has_power_resource" = "1"
+				register "generic.disable_gpio_export_in_crs" = "1"
+				register "hid_desc_reg_offset" = "0x01"
+				device i2c 40 on end
+			end
 		end	# - I2C 7
 	end
 
diff --git a/src/mainboard/google/octopus/variants/lick/overridetree.cb b/src/mainboard/google/octopus/variants/lick/overridetree.cb
index 3ade35402f..af6711a5fc 100644
--- a/src/mainboard/google/octopus/variants/lick/overridetree.cb
+++ b/src/mainboard/google/octopus/variants/lick/overridetree.cb
@@ -52,7 +52,7 @@ chip soc/intel/apollolake
 	#| I2C5              | Audio                     |
 	#| I2C6              | Trackpad                  |
 	#+-------------------+---------------------------+
-        register "tcc_offset" = "15"
+	register "tcc_offset" = "15"
 
 	register "common_soc_config" = "{
 		.gspi[0] = {
diff --git a/src/mainboard/google/octopus/variants/phaser/overridetree.cb b/src/mainboard/google/octopus/variants/phaser/overridetree.cb
index b80d0317c8..9ce2a0b2cf 100644
--- a/src/mainboard/google/octopus/variants/phaser/overridetree.cb
+++ b/src/mainboard/google/octopus/variants/phaser/overridetree.cb
@@ -159,18 +159,18 @@ chip soc/intel/apollolake
 				register "hid_desc_reg_offset" = "0x20"
 				device i2c 20 on end
 			end
-                        chip drivers/i2c/generic
-                               register "hid" = ""RAYD0001""
-                               register "desc" = ""Raydium Touchscreen""
-                               register "irq" = "ACPI_IRQ_EDGE_LOW(GPIO_212_IRQ)"
-                               register "probed" = "1"
-                               register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_105)"
-                               register "reset_delay_ms" = "1"
-                               register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_146)"
-                               register "enable_delay_ms" = "50"
-                               register "has_power_resource" = "1"
-                               device i2c 39 on end
-                       end
+			chip drivers/i2c/generic
+				register "hid" = ""RAYD0001""
+				register "desc" = ""Raydium Touchscreen""
+				register "irq" = "ACPI_IRQ_EDGE_LOW(GPIO_212_IRQ)"
+				register "probed" = "1"
+				register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_105)"
+				register "reset_delay_ms" = "1"
+				register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_146)"
+				register "enable_delay_ms" = "50"
+				register "has_power_resource" = "1"
+				device i2c 39 on end
+			end
 		end	# - I2C 7
 	end
 
diff --git a/src/mainboard/google/poppy/variants/nami/devicetree.cb b/src/mainboard/google/poppy/variants/nami/devicetree.cb
index 8e1f954d8a..bf3b7bd923 100644
--- a/src/mainboard/google/poppy/variants/nami/devicetree.cb
+++ b/src/mainboard/google/poppy/variants/nami/devicetree.cb
@@ -366,19 +366,19 @@ chip soc/intel/skylake
 			end
 		end # I2C #1
 		device pci 15.2 on
-                        chip drivers/i2c/hid
-                                register "generic.hid" = ""WCOM005C""
-                                register "generic.desc" = ""WCOM Digitizer""
-                                register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_D1_IRQ)"
+			chip drivers/i2c/hid
+				register "generic.hid" = ""WCOM005C""
+				register "generic.desc" = ""WCOM Digitizer""
+				register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_D1_IRQ)"
 				register "generic.probed" = "1"
 				register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D3)"
 				register "generic.reset_delay_ms" = "20"
 				register "generic.has_power_resource" = "1"
 				register "generic.disable_gpio_export_in_crs" = "1"
 				register "generic.wake" = "GPE0_DW2_01"
-                                register "hid_desc_reg_offset" = "0x1"
-                                device i2c 0x9 on end
-                        end
+				register "hid_desc_reg_offset" = "0x1"
+				device i2c 0x9 on end
+			end
 			chip drivers/generic/gpio_keys
 				register "name" = ""PENH""
 				register "gpio" = "ACPI_GPIO_INPUT_ACTIVE_HIGH(GPP_E8)"
diff --git a/src/mainboard/google/poppy/variants/nautilus/devicetree.cb b/src/mainboard/google/poppy/variants/nautilus/devicetree.cb
index 0a67d4d7f9..d64bd8a022 100644
--- a/src/mainboard/google/poppy/variants/nautilus/devicetree.cb
+++ b/src/mainboard/google/poppy/variants/nautilus/devicetree.cb
@@ -144,8 +144,8 @@ chip soc/intel/skylake
 	register "PcieRpClkReqSupport[0]" = "1"
 	# RP 1 uses SRCCLKREQ1#
 	register "PcieRpClkReqNumber[0]" = "1"
-        # RP 1 uses uses CLK SRC 1
-        register "PcieRpClkSrcNumber[0]" = "1"
+	# RP 1 uses uses CLK SRC 1
+	register "PcieRpClkSrcNumber[0]" = "1"
 	# RP 1, Enable Advanced Error Reporting
 	register "PcieRpAdvancedErrorReporting[0]" = "1"
 	# RP 1, Enable Latency Tolerance Reporting Mechanism
diff --git a/src/mainboard/google/poppy/variants/nocturne/devicetree.cb b/src/mainboard/google/poppy/variants/nocturne/devicetree.cb
index 8959a2902e..26207f529e 100644
--- a/src/mainboard/google/poppy/variants/nocturne/devicetree.cb
+++ b/src/mainboard/google/poppy/variants/nocturne/devicetree.cb
@@ -147,19 +147,19 @@ chip soc/intel/skylake
 	register "PcieRpAdvancedErrorReporting[0]" = "1"
 	register "PcieRpLtrEnable[0]" = "1"
 
-        # Root port 9 (x2)
-        #  PcieRpEnable:                 Enable root port
-        #  PcieRpClkReqSupport:          Enable CLKREQ#
-        #  PcieRpClkReqNumber:           Uses SRCCLKREQ2#
-        #  PcieRpClkSrcNumber:           Uses 3
-        #  PcieRpAdvancedErrorReporting: Enable Advanced Error Reporting
-        #  PcieRpLtrEnable:              Enable Latency Tolerance Reporting Mechanism
-        register "PcieRpEnable[8]" = "1"
-        register "PcieRpClkReqSupport[8]" = "1"
-        register "PcieRpClkReqNumber[8]" = "2"
-        register "PcieRpClkSrcNumber[8]" = "3"
-        register "PcieRpAdvancedErrorReporting[8]" = "1"
-        register "PcieRpLtrEnable[8]" = "1"
+	# Root port 9 (x2)
+	#  PcieRpEnable:                 Enable root port
+	#  PcieRpClkReqSupport:          Enable CLKREQ#
+	#  PcieRpClkReqNumber:           Uses SRCCLKREQ2#
+	#  PcieRpClkSrcNumber:           Uses 3
+	#  PcieRpAdvancedErrorReporting: Enable Advanced Error Reporting
+	#  PcieRpLtrEnable:              Enable Latency Tolerance Reporting Mechanism
+	register "PcieRpEnable[8]" = "1"
+	register "PcieRpClkReqSupport[8]" = "1"
+	register "PcieRpClkReqNumber[8]" = "2"
+	register "PcieRpClkSrcNumber[8]" = "3"
+	register "PcieRpAdvancedErrorReporting[8]" = "1"
+	register "PcieRpLtrEnable[8]" = "1"
 
 	# USB 2.0
 	register "usb2_ports[0]" = "USB2_PORT_LONG(OC0)"	# Type-C Port 1
@@ -306,12 +306,12 @@ chip soc/intel/skylake
 				register "generic.desc" = ""WCOM Digitizer""
 				register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_E7_IRQ)"
 				register "generic.speed" = "I2C_SPEED_FAST_PLUS"
-                                register "generic.probed" = "1"
-                                register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_E11)"
-                                register "generic.reset_delay_ms" = "20"
-                                register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C22)"
-                                register "generic.enable_delay_ms" = "1"
-                                register "generic.has_power_resource" = "1"
+				register "generic.probed" = "1"
+				register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_E11)"
+				register "generic.reset_delay_ms" = "20"
+				register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C22)"
+				register "generic.enable_delay_ms" = "1"
+				register "generic.has_power_resource" = "1"
 				register "generic.disable_gpio_export_in_crs" = "1"
 				register "hid_desc_reg_offset" = "0x1"
 				device i2c 0a on end
diff --git a/src/mainboard/google/sarien/variants/arcada/devicetree.cb b/src/mainboard/google/sarien/variants/arcada/devicetree.cb
index 7e4da3fff8..f22c6262fd 100644
--- a/src/mainboard/google/sarien/variants/arcada/devicetree.cb
+++ b/src/mainboard/google/sarien/variants/arcada/devicetree.cb
@@ -340,7 +340,7 @@ chip soc/intel/cannonlake
 				device i2c 2c on end
 			end
 			chip drivers/i2c/hid
-			        register "generic.hid" = ""PNP0C50""
+				register "generic.hid" = ""PNP0C50""
 				register "generic.desc" = ""Cirque Touchpad""
 				register "generic.irq" = "ACPI_IRQ_EDGE_LOW(GPP_B3_IRQ)"
 				register "generic.probed" = "1"