mb/google/dedede/var/shotzo: Update devicetree and GPIO table

Based on latest schematic:

1.  Update devicetree for USB port description
2.  Add touchscreen ILITEK, amplifier ALC1019, codec ALC5682
3.  Configure GPIO table to reflect that
4.  Remove APW8738BQBI IC so set "disable_external_bypass_vr to "1"

BUG=b:235303242, b:236791101
BRANCH=dedede
TEST=build

Change-Id: I38c8c5b913013d818ac6a26284184c9decdd9f4e
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65079
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>

3 files changed, 202 insertions, 10 deletions

diff --git a/src/mainboard/google/dedede/variants/shotzo/Makefile.inc b/src/mainboard/google/dedede/variants/shotzo/Makefile.inc
new file mode 100644
index 0000000000..eb2c9bc021
--- /dev/null
+++ b/src/mainboard/google/dedede/variants/shotzo/Makefile.inc
@@ -0,0 +1,3 @@
+## SPDX-License-Identifier: GPL-2.0-or-later
+
+ramstage-y += gpio.c
diff --git a/src/mainboard/google/dedede/variants/shotzo/gpio.c b/src/mainboard/google/dedede/variants/shotzo/gpio.c
new file mode 100644
index 0000000000..729f556d0e
--- /dev/null
+++ b/src/mainboard/google/dedede/variants/shotzo/gpio.c
@@ -0,0 +1,72 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+#include <baseboard/gpio.h>
+#include <baseboard/variants.h>
+
+/* Pad configuration in ramstage */
+static const struct pad_config gpio_table[] = {
+	/* A10 : LAN_PWR_ON */
+	PAD_CFG_GPO(GPP_A10, 1, DEEP),
+	/* A11 : TOUCH_RPT_EN */
+	PAD_NC(GPP_A11, NONE),
+	/* A12 : USB_OC1_N */
+	PAD_CFG_NF(GPP_A12, NONE, DEEP, NF1),
+	/* A13 : USB_OC2_N */
+	PAD_CFG_NF(GPP_A13, NONE, DEEP, NF1),
+	/* A18 : USB_OC0_N */
+	PAD_CFG_NF(GPP_A18, NONE, DEEP, NF1),
+
+	/* B3  : TRACKPAD_INT_ODL */
+	PAD_NC(GPP_B3, NONE),
+
+	/* C16 : I2C0_SDA */
+	PAD_NC(GPP_C16, NONE),
+	/* C17 : I2C0_SCL */
+	PAD_NC(GPP_C17, NONE),
+	/* C18 : LVDS_SDA */
+	PAD_CFG_NF(GPP_C18, NONE, DEEP, NF1),
+	/* C19 : LVDS_SCL */
+	PAD_CFG_NF(GPP_C19, NONE, DEEP, NF1),
+
+	/* D4 : TOUCH_INT_ODL */
+	PAD_CFG_GPI_IRQ_WAKE(GPP_D4, NONE, PLTRST, LEVEL, INVERT),
+	/* D12 : WCAM_RST_L */
+	PAD_NC(GPP_D12, NONE),
+	/* D15 : PD_EN_WEBCAM */
+	PAD_CFG_GPI_GPIO_DRIVER(GPP_D15, NONE, DEEP),
+
+	/* E0  : CLK_24M_UCAM */
+	PAD_NC(GPP_E0, NONE),
+	/* E2  : CLK_24M_WCAM */
+	PAD_NC(GPP_E2, NONE),
+
+	/* G0  : SD_CMD */
+	PAD_NC(GPP_G0, NONE),
+	/* G1  : SD_DATA0 */
+	PAD_NC(GPP_G1, NONE),
+	/* G2  : SD_DATA1 */
+	PAD_NC(GPP_G2, NONE),
+	/* G3  : SD_DATA2 */
+	PAD_NC(GPP_G3, NONE),
+	/* G4  : SD_DATA3 */
+	PAD_NC(GPP_G4, NONE),
+	/* G5  : SD_CD_ODL */
+	PAD_NC(GPP_G5, NONE),
+	/* G6  : SD_CLK */
+	PAD_NC(GPP_G6, NONE),
+	/* G7  : SD_SDIO_WP */
+	PAD_NC(GPP_G7, NONE),
+
+	/* H1  : EN_PP3300_SD_U */
+	PAD_NC(GPP_H1, NONE),
+	/* H6  : I2C3_SDA */
+	PAD_NC(GPP_H6, NONE),
+	/* H7  : I2C3_SCL */
+	PAD_NC(GPP_H7, NONE),
+};
+
+const struct pad_config *variant_override_gpio_table(size_t *num)
+{
+	*num = ARRAY_SIZE(gpio_table);
+	return gpio_table;
+}
diff --git a/src/mainboard/google/dedede/variants/shotzo/overridetree.cb b/src/mainboard/google/dedede/variants/shotzo/overridetree.cb
index 404024b1d6..4bbab783e1 100644
--- a/src/mainboard/google/dedede/variants/shotzo/overridetree.cb
+++ b/src/mainboard/google/dedede/variants/shotzo/overridetree.cb
@@ -8,10 +8,8 @@ chip soc/intel/jasperlake
 	#|                   | required to set up a BAR  |
 	#|                   | for TPM communication     |
 	#|                   | before memory is up       |
-	#| I2C0              | Trackpad                  |
-	#| I2C1              | Digitizer                 |
+	#| I2C1              | LVDS                      |
 	#| I2C2              | Touchscreen               |
-	#| I2C3              | Camera                    |
 	#| I2C4              | Audio                     |
 	#+-------------------+---------------------------+
 	register "common_soc_config" = "{
@@ -19,24 +17,143 @@ chip soc/intel/jasperlake
 			.speed_mhz = 1,
 			.early_init = 1,
 		},
-		.i2c[0] = {
-			.speed = I2C_SPEED_FAST,
-		},
 		.i2c[1] = {
 			.speed = I2C_SPEED_FAST,
 		},
 		.i2c[2] = {
 			.speed = I2C_SPEED_FAST,
 		},
-		.i2c[3] = {
-			.speed = I2C_SPEED_FAST,
-		},
 		.i2c[4] = {
 			.speed = I2C_SPEED_FAST,
 		},
 	}"
 
+	register "disable_external_bypass_vr" = "1"    # Does not support external vnn power rail
+
+	# USB Port Configuration
+	register "usb2_ports[5]" = "USB2_PORT_MID(OC_SKIP)"     # Camera
+	register "usb2_ports[6]" = "USB2_PORT_MID(OC_SKIP)"     # Lan
+
 	device domain 0 on
-		device pci 15.0 on end
+		device pci 14.0 on
+			chip drivers/usb/acpi
+				device usb 0.0 on
+					chip drivers/usb/acpi
+						register "desc" = ""USB2 Type-C Port C0""
+						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
+						register "group" = "ACPI_PLD_GROUP(1, 1)"
+						device usb 2.0 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB2 Type-A Port A2""
+						register "type" = "UPC_TYPE_A"
+						register "group" = "ACPI_PLD_GROUP(2, 1)"
+						device usb 2.1 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB2 Type-A Port A0""
+						register "type" = "UPC_TYPE_A"
+						register "group" = "ACPI_PLD_GROUP(2, 2)"
+						device usb 2.2 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB2 Type-A Port A1""
+						register "type" = "UPC_TYPE_A"
+						register "group" = "ACPI_PLD_GROUP(2, 3)"
+						device usb 2.3 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB2 Type-A Port A3""
+						register "type" = "UPC_TYPE_A"
+						register "group" = "ACPI_PLD_GROUP(2, 4)"
+						device usb 2.4 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""Camera""
+						register "type" = "UPC_TYPE_INTERNAL"
+						device usb 2.5 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""LAN""
+						register "type" = "UPC_TYPE_INTERNAL"
+						device usb 2.6 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""Bluetooth""
+						register "type" = "UPC_TYPE_INTERNAL"
+						register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_H19)"
+						device usb 2.7 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB3 Type-C Port C0""
+						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
+						register "group" = "ACPI_PLD_GROUP(1, 1)"
+						device usb 3.0 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""LAN""
+						register "type" = "UPC_TYPE_INTERNAL"
+						device usb 3.1 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB3 Type-A Port A0""
+						register "type" = "UPC_TYPE_USB3_A"
+						register "group" = "ACPI_PLD_GROUP(2, 1)"
+						device usb 3.2 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB3 Type-A Port A1""
+						register "type" = "UPC_TYPE_USB3_A"
+						register "group" = "ACPI_PLD_GROUP(2, 2)"
+						device usb 3.3 on end
+					end
+				end
+			end
+		end # USB xHCI
+		device pci 15.0 off end # I2C 0
+		device pci 15.2 on
+			chip drivers/i2c/hid
+				register "generic.hid" = ""ILTK0001""
+				register "generic.desc" = ""ILITEK Touchscreen""
+				register "generic.irq" = "ACPI_IRQ_EDGE_LOW(GPP_D4_IRQ)"
+				register "generic.probed" = "1"
+				register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D5)"
+				register "generic.reset_delay_ms" = "20"
+				register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D6)"
+				register "generic.enable_delay_ms" = "12"
+				register "generic.wake" = "GPE0_DW2_04"
+				register "generic.has_power_resource" = "1"
+				register "generic.disable_gpio_export_in_crs" = "1"
+				register "hid_desc_reg_offset" = "0x01"
+				device i2c 41 on end
+			end
+		end # I2C 2
+		device pci 15.3 off  end #I2C 3
+		device pci 1c.7 on
+			chip drivers/wifi/generic
+				register "wake" = "GPE0_DW2_03"
+				device pci 00.0 on  end
+			end
+		end # PCI Express Root Port 8 - WLAN
+		device pci 19.0 on
+			chip drivers/i2c/generic
+				register "hid" = ""RTL5682""
+				register "name" = ""RT58""
+				register "desc" = ""Realtek RT5682""
+				register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_D16)"
+				register "property_count" = "1"
+				register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER"
+				register "property_list[0].name" = ""realtek,jd-src""
+				register "property_list[0].integer" = "1"
+				device i2c 1a on end
+			end
+		end #I2C 4
+		device pci 1f.3 on
+			chip drivers/generic/alc1015
+				register "hid" = ""RTL1019""
+				register "sdb" =  "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D17)"
+				device generic 0 on end
+			end
+		end # Intel HDA
 	end
 end