summaryrefslogtreecommitdiff
path: root/src/mainboard/google
diff options
context:
space:
mode:
authorKarthikeyan Ramasubramanian <kramasub@google.com>2020-11-10 14:54:40 -0700
committerTim Wawrzynczak <twawrzynczak@chromium.org>2020-11-13 01:28:33 +0000
commitc37e1e6d071cc9c64e99cffa4250e912f70e6ef0 (patch)
treead6353da82383086941f2a62b69b07c2b2f8cea0 /src/mainboard/google
parentb2f2bd1c82fb0b393d44c1672041e621cfeaf435 (diff)
mb/google/poppy: Configure IRQs as level triggered for HID over I2C
As per HID over I2C Protocol Specification[1] Version 1.00 Section 7.4, the interrupt line used by the device is required to be level triggered. Hence, this change updates the configuration of the HID over I2C devices to be level triggered. References: [1] http://download.microsoft.com/download/7/d/d/7dd44bb7-2a7a-4505-ac1c-7227d3d96d5b/hid-over-i2c-protocol-spec-v1-0.docx BUG=b:172846122 TEST=./util/abuild/abuild Change-Id: Ida1b1d05b39e67a9eba3bfaecca37f38821a438b Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47423 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
Diffstat (limited to 'src/mainboard/google')
-rw-r--r--src/mainboard/google/poppy/variants/atlas/devicetree.cb2
-rw-r--r--src/mainboard/google/poppy/variants/nami/devicetree.cb6
-rw-r--r--src/mainboard/google/poppy/variants/nautilus/devicetree.cb2
3 files changed, 5 insertions, 5 deletions
diff --git a/src/mainboard/google/poppy/variants/atlas/devicetree.cb b/src/mainboard/google/poppy/variants/atlas/devicetree.cb
index 3797fb0135..668e72dc21 100644
--- a/src/mainboard/google/poppy/variants/atlas/devicetree.cb
+++ b/src/mainboard/google/poppy/variants/atlas/devicetree.cb
@@ -292,7 +292,7 @@ chip soc/intel/skylake
chip drivers/i2c/hid
register "generic.hid" = ""ACPI0C50""
register "generic.desc" = ""ELAN Touchpad""
- register "generic.irq" = "ACPI_IRQ_EDGE_LOW(GPP_A19_IRQ)"
+ register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_A19_IRQ)"
register "generic.wake" = "GPE0_DW0_23" # GPP_A23
register "hid_desc_reg_offset" = "0x01"
device i2c 0x15 on end
diff --git a/src/mainboard/google/poppy/variants/nami/devicetree.cb b/src/mainboard/google/poppy/variants/nami/devicetree.cb
index d408f9ee93..42f810800a 100644
--- a/src/mainboard/google/poppy/variants/nami/devicetree.cb
+++ b/src/mainboard/google/poppy/variants/nami/devicetree.cb
@@ -320,7 +320,7 @@ chip soc/intel/skylake
chip drivers/i2c/hid
register "generic.hid" = ""SYTS7817""
register "generic.desc" = ""Synaptics Touchscreen""
- register "generic.irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)"
+ register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_E7_IRQ)"
register "generic.probed" = "1"
register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_B4)"
register "generic.enable_delay_ms" = "45"
@@ -332,7 +332,7 @@ chip soc/intel/skylake
chip drivers/i2c/hid
register "generic.hid" = ""GTCH7503""
register "generic.desc" = ""G2TOUCH Touchscreen""
- register "generic.irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)"
+ register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_E7_IRQ)"
register "generic.probed" = "1"
register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_B3)"
register "generic.reset_delay_ms" = "50"
@@ -355,7 +355,7 @@ chip soc/intel/skylake
chip drivers/i2c/hid
register "generic.hid" = ""PNP0C50""
register "generic.desc" = ""Synaptics Touchpad""
- register "generic.irq" = "ACPI_IRQ_EDGE_LOW(GPP_E3_IRQ)"
+ register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_E3_IRQ)"
register "generic.wake" = "GPE0_DW2_16"
register "generic.probed" = "1"
register "hid_desc_reg_offset" = "0x20"
diff --git a/src/mainboard/google/poppy/variants/nautilus/devicetree.cb b/src/mainboard/google/poppy/variants/nautilus/devicetree.cb
index b7d171b6ff..3d91884d51 100644
--- a/src/mainboard/google/poppy/variants/nautilus/devicetree.cb
+++ b/src/mainboard/google/poppy/variants/nautilus/devicetree.cb
@@ -294,7 +294,7 @@ chip soc/intel/skylake
chip drivers/i2c/hid
register "generic.hid" = ""SYTS7813""
register "generic.desc" = ""Synaptics Touchscreen""
- register "generic.irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)"
+ register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_E7_IRQ)"
register "generic.probed" = "1"
register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C22)"
register "generic.enable_delay_ms" = "45"