mb/google/volteer: Update collis device tree

Update device tree override to match schematics.

BUG=b:182227204
TEST=emerge-volteer coreboot

Signed-off-by: FrankChu <frank_chu@pegatron.corp-partner.google.com>
Change-Id: Ib1698504cc0b377659fa60b4fae25227b5823753
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51743
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>

1 files changed, 250 insertions, 1 deletions

diff --git a/src/mainboard/google/volteer/variants/collis/overridetree.cb b/src/mainboard/google/volteer/variants/collis/overridetree.cb
index 32204c58e7..fda59e563d 100644
--- a/src/mainboard/google/volteer/variants/collis/overridetree.cb
+++ b/src/mainboard/google/volteer/variants/collis/overridetree.cb
@@ -1,6 +1,255 @@
 chip soc/intel/tigerlake
+	# BitMask where bits [3:0] are Controller 0 Channel [3:0] and
+	# bits [7:4] are Controller 1 Channel [3:0].
+	# Enable Command Mirroring for controller 0 channel 0 and 1,
+	# and controller 1 channel 0 and 1.
+	register "CmdMirror" = "0x00000033"
+
+	register "DdiPort1Hpd" = "0"
+	register "DdiPort2Hpd" = "0"
+
+	register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC1)"	# Type-A Port A0
+	register "usb2_ports[1]" = "USB2_PORT_TYPE_C(OC2)"	# Type-A Port A1
+	register "usb2_ports[2]" = "USB2_PORT_TYPE_C(OC0)"	# Type-C Port C1
+	register "usb2_ports[3]" = "USB2_PORT_MID(OC_SKIP)"	# Front Camera
+	register "usb2_ports[4]" = "USB2_PORT_TYPE_C(OC3)"	# Type-C Port C0
+	register "usb2_ports[5]" = "USB2_PORT_MID(OC_SKIP)"	# WFC Camera
+	register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC1)"	# USB3/2 Type-A Port A0
+	register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC2)"	# USB3/2 Type-A Port A1
+
+	# Disable SRCCLKREQ1#
+	register "PcieClkSrcUsage[1]" = "PCIE_CLK_NOTUSED"
+
+	#+-------------------+---------------------------+
+	#| Field             |  Value                    |
+	#+-------------------+---------------------------+
+	#| chipset_lockdown  | CHIPSET_LOCKDOWN_COREBOOT |
+	#| GSPI0             | cr50 TPM. Early init is   |
+	#|                   | required to set up a BAR  |
+	#|                   | for TPM communication     |
+	#|                   | before memory is up       |
+	#| I2C0              | Audio                     |
+	#| I2C1              | Touchscreen               |
+	#| I2C5              | Trackpad                  |
+	#+-------------------+---------------------------+
+	register "common_soc_config" = "{
+		.chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT,
+		.gspi[0] = {
+			.speed_mhz = 1,
+			.early_init = 1,
+		},
+		.i2c[0] = {
+			.speed = I2C_SPEED_FAST,
+		},
+		.i2c[1] = {
+			.speed = I2C_SPEED_FAST,
+		},
+		.i2c[5] = {
+			.speed = I2C_SPEED_FAST,
+		},
+	}"
 
 	device domain 0 on
+		device ref i2c0 on
+			chip drivers/i2c/generic
+				register "hid" = ""10EC5682""
+				register "name" = ""RT58""
+				register "desc" = ""Headset Codec""
+				register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_R5)"
+				# Set the jd_src to RT5668_JD1 for jack detection
+				register "property_count" = "1"
+				register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER"
+				register "property_list[0].name" = ""realtek,jd-src""
+				register "property_list[0].integer" = "1"
+				device i2c 1a on
+				end
+			end
+			chip drivers/i2c/max98373
+				register "vmon_slot_no" = "0"
+				register "imon_slot_no" = "1"
+				register "uid" = "0"
+				register "desc" = ""Right Speaker Amp""
+				register "name" = ""MAXR""
+				device i2c 31 on
+					probe AUDIO MAX98373_ALC5682I_I2S_UP4
+				end
+			end
+			chip drivers/i2c/max98373
+				register "vmon_slot_no" = "2"
+				register "imon_slot_no" = "3"
+				register "uid" = "1"
+				register "desc" = ""Left Speaker Amp""
+				register "name" = ""MAXL""
+				device i2c 32 on
+					probe AUDIO MAX98373_ALC5682I_I2S_UP4
+				end
+			end
+		end
+		device ref i2c1 on
+			chip drivers/i2c/hid
+				register "generic.hid" = ""ELAN9008""
+				register "generic.desc" = ""ELAN Touchscreen""
+				register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_E7_IRQ)"
+				register "generic.probed" = "1"
+				register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C10)"
+				register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_F16)"
+				register "generic.reset_delay_ms" = "20"
+				register "generic.has_power_resource" = "1"
+				register "generic.disable_gpio_export_in_crs" = "1"
+				register "hid_desc_reg_offset" = "0x01"
+				device i2c 10 on end
+			end
+			chip drivers/generic/gpio_keys
+				register "name" = ""PENH""
+				# GPP_E17 is the IRQ source, and GPP_E1 is the wake source
+				register "gpio" = "ACPI_GPIO_INPUT_ACTIVE_LOW(GPP_E17)"
+				register "key.wake_gpe" = "GPE0_DW2_01"
+				register "key.wakeup_route" = "WAKEUP_ROUTE_SCI"
+				register "key.wakeup_event_action" = "EV_ACT_DEASSERTED"
+				register "key.dev_name" = ""EJCT""
+				register "key.linux_code" = "SW_PEN_INSERTED"
+				register "key.linux_input_type" = "EV_SW"
+				register "key.label" = ""pen_eject""
+				device generic 0 on end
+			end
+		end
+		device ref i2c5 on
+			chip drivers/i2c/generic
+				register "hid" = ""ELAN0000""
+				register "desc" = ""ELAN Touchpad""
+				register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_E15_IRQ)"
+				register "wake" = "GPE0_DW2_15"
+				register "probed" = "1"
+				device i2c 15 on
+					probe TOUCHPAD REGULAR_TOUCHPAD
+				end
+			end
+			chip drivers/i2c/hid
+				register "generic.hid" = ""ELAN2702""
+				register "generic.desc" = ""ELAN Touchpad""
+				register "generic.irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_E15_IRQ)"
+				register "generic.wake" = "GPE0_DW2_15"
+				register "generic.probed" = "1"
+				register "hid_desc_reg_offset" = "0x01"
+				device i2c 15 on
+					probe TOUCHPAD NUMPAD_TOUCHPAD
+				end
+			end
+		end
+		device ref pch_espi on
+			chip ec/google/chromeec
+				use conn0 as mux_conn[0]
+				use conn1 as mux_conn[1]
+				device pnp 0c09.0 on end
+			end
+		end
+		device ref pcie_rp9 on
+			chip soc/intel/common/block/pcie/rtd3
+				register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_B2)"
+				register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_A11)"
+				register "srcclk_pin" = "0"
+				device generic 0 on end
+			end
+		end
+		device ref pmc hidden
+			# The pmc_mux chip driver is a placeholder for the
+			# PMC.MUX device in the ACPI hierarchy.
+			chip drivers/intel/pmc_mux
+				device generic 0 on
+					chip drivers/intel/pmc_mux/conn
+						register "usb2_port_number" = "5"
+						register "usb3_port_number" = "1"
+						# SBU is fixed, HSL follows CC
+						register "sbu_orientation" = "TYPEC_ORIENTATION_NORMAL"
+						device generic 0 alias conn0 on end
+					end
+					chip drivers/intel/pmc_mux/conn
+						register "usb2_port_number" = "3"
+						register "usb3_port_number" = "2"
+						# SBU is fixed, HSL follows CC
+						register "sbu_orientation" = "TYPEC_ORIENTATION_NORMAL"
+						device generic 1 alias conn1 on end
+					end
+				end
+			end
+		end
+		device ref north_xhci on
+			chip drivers/usb/acpi
+				device ref tcss_root_hub on
+					chip drivers/usb/acpi
+						register "desc" = ""USB3 Type-C Port C0 (MLB)""
+						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
+						register "group" = "ACPI_PLD_GROUP(4, 2)"
+						device ref tcss_usb3_port1 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB3 Type-C Port C1 (DB)""
+						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
+						register "group" = "ACPI_PLD_GROUP(3, 2)"
+						device ref tcss_usb3_port2 on
+							probe DB_USB USB3_ACTIVE
+						end
+					end
+				end
+			end
+		end
+		device ref south_xhci on
+			chip drivers/usb/acpi
+				device ref xhci_root_hub on
+					chip drivers/usb/acpi
+						register "desc" = ""USB2 Type-A Port A0 (MLB)""
+						register "type" = "UPC_TYPE_A"
+						register "group" = "ACPI_PLD_GROUP(1, 1)"
+						device ref usb2_port1 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB2 Type-A Port A1 (DB)""
+						register "type" = "UPC_TYPE_A"
+						register "group" = "ACPI_PLD_GROUP(2, 1)"
+						device ref usb2_port2 on
+							probe DB_USB USB3_ACTIVE
+						end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB2 Type-C Port C1 (DB)""
+						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
+						register "group" = "ACPI_PLD_GROUP(3, 1)"
+						device ref usb2_port3 on
+							probe DB_USB USB3_ACTIVE
+						end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB2 Camera""
+						register "type" = "UPC_TYPE_INTERNAL"
+						device ref usb2_port4 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB2 Type-C Port C0 (MLB)""
+						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
+						register "group" = "ACPI_PLD_GROUP(4, 1)"
+						device ref usb2_port5 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""WFC Camera""
+						register "type" = "UPC_TYPE_INTERNAL"
+						device ref usb2_port6 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB3 Type-A Port A0 (MLB)""
+						register "type" = "UPC_TYPE_USB3_A"
+						register "group" = "ACPI_PLD_GROUP(1, 2)"
+						device ref usb3_port1 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB3 Type-A Port A1 (DB)""
+						register "type" = "UPC_TYPE_USB3_A"
+						register "group" = "ACPI_PLD_GROUP(2, 2)"
+						device ref usb3_port2 on
+							probe DB_USB USB3_ACTIVE
+						end
+					end
+				end
+			end
+		end
 	end
-
 end