summaryrefslogtreecommitdiff
path: root/src/mainboard/google
diff options
context:
space:
mode:
authorMartin Roth <martinroth@chromium.org>2020-10-30 16:41:32 -0600
committerPatrick Georgi <pgeorgi@google.com>2020-11-16 11:03:25 +0000
commit726504a61a83b12a72fca40c88c7fee1c40b54ad (patch)
tree02bb42291254e307eb1f86183e988f3f486585d2 /src/mainboard/google
parentfc2047b1f74f42fc2e38fbafdf09929ca39bfa62 (diff)
mb/google/zork: Init fingerprint GPIOs for boot vs resume
Add a function that initializes GPIOs based on the sleep type that the system is coming back from. This allows initialization of the fingerprint GPIOs which need to be handled differently between wake from S3 and boot from S5. On initial boot, the state of the FP sensor could be either enabled or disabled. Because of this, on boot, we power off the sensor for >200ms, to reset its state, then power it back on. In suspend/resume, the fingerprint sensor should remain powered the entire time. If fingerprint is disabled on the trembyle-based board, set the pins to no-connect. Dalboz doesn't have fingerprint and the GPIOS are configured differently due to the FT5 chip having fewer GPIOS than FP5, so nothing needs to be initialized there. There were also a couple of trivial comment clean ups regarding the FPMCU GPIOS. BUG=b:171837716 TEST=Boot & Check GPIO states. BRANCH=Zork Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I16a2e621145782e0a908bb3e49478586c09a0e0a Reviewed-on: https://review.coreboot.org/c/coreboot/+/47308 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
Diffstat (limited to 'src/mainboard/google')
-rw-r--r--src/mainboard/google/zork/Kconfig16
-rw-r--r--src/mainboard/google/zork/bootblock.c4
-rw-r--r--src/mainboard/google/zork/mainboard.c3
-rw-r--r--src/mainboard/google/zork/variants/baseboard/gpio_baseboard_dalboz.c12
-rw-r--r--src/mainboard/google/zork/variants/baseboard/gpio_baseboard_trembyle.c53
-rw-r--r--src/mainboard/google/zork/variants/baseboard/helpers.c28
-rw-r--r--src/mainboard/google/zork/variants/baseboard/include/baseboard/variants.h11
-rw-r--r--src/mainboard/google/zork/variants/ezkinil/gpio.c4
-rw-r--r--src/mainboard/google/zork/variants/woomax/gpio.c8
9 files changed, 119 insertions, 20 deletions
diff --git a/src/mainboard/google/zork/Kconfig b/src/mainboard/google/zork/Kconfig
index 02181fba13..320f668838 100644
--- a/src/mainboard/google/zork/Kconfig
+++ b/src/mainboard/google/zork/Kconfig
@@ -225,6 +225,22 @@ config VARIANT_MIN_BOARD_ID_WIFI_POWER_ACTIVE_LOW
Minimum board version where the variant starts supporting
active low power enable for WiFi.
+config VARIANT_HAS_FPMCU
+ bool
+ default y if BOARD_GOOGLE_BERKNIP
+ default y if BOARD_GOOGLE_MORPHIUS
+ default n
+ help
+ Select y if any SKU of the board has a fingerprint sensor
+
+config VARIANT_MAX_BOARD_ID_BROKEN_FMPCU_POWER
+ int
+ default 4 if BOARD_GOOGLE_MORPHIUS
+ default 3 if BOARD_GOOGLE_BERKNIP
+ default 0
+ help
+ Last board version that needs the extra delay for FPMCU init.
+
config VBOOT_STARTS_BEFORE_BOOTBLOCK
bool "PSP verstage"
default y if VBOOT
diff --git a/src/mainboard/google/zork/bootblock.c b/src/mainboard/google/zork/bootblock.c
index a7636de702..ed058886ff 100644
--- a/src/mainboard/google/zork/bootblock.c
+++ b/src/mainboard/google/zork/bootblock.c
@@ -2,12 +2,16 @@
#include <bootblock_common.h>
#include <baseboard/variants.h>
+#include <acpi/acpi.h>
void bootblock_mainboard_early_init(void)
{
size_t num_gpios;
const struct soc_amd_gpio *gpios;
+ gpios = variant_bootblock_gpio_table(&num_gpios, acpi_get_sleep_type());
+ program_gpios(gpios, num_gpios);
+
if (!CONFIG(VBOOT_STARTS_BEFORE_BOOTBLOCK)) {
gpios = variant_early_gpio_table(&num_gpios);
program_gpios(gpios, num_gpios);
diff --git a/src/mainboard/google/zork/mainboard.c b/src/mainboard/google/zork/mainboard.c
index 9503d3762c..6d930d0e7a 100644
--- a/src/mainboard/google/zork/mainboard.c
+++ b/src/mainboard/google/zork/mainboard.c
@@ -247,12 +247,13 @@ static void mainboard_final(void *chip_info)
gnvs = acpi_get_gnvs();
-
if (gnvs) {
gnvs->tmps = CTL_TDP_SENSOR_ID;
gnvs->tcrt = CRITICAL_TEMPERATURE;
gnvs->tpsv = PASSIVE_TEMPERATURE;
}
+
+ finalize_gpios(acpi_get_sleep_type());
}
struct chip_operations mainboard_ops = {
diff --git a/src/mainboard/google/zork/variants/baseboard/gpio_baseboard_dalboz.c b/src/mainboard/google/zork/variants/baseboard/gpio_baseboard_dalboz.c
index 2398d07d74..e43ccdd8b9 100644
--- a/src/mainboard/google/zork/variants/baseboard/gpio_baseboard_dalboz.c
+++ b/src/mainboard/google/zork/variants/baseboard/gpio_baseboard_dalboz.c
@@ -30,7 +30,7 @@ static const struct soc_amd_gpio gpio_set_stage_ram[] = {
PAD_NF(GPIO_8, ACP_I2S_LRCLK, PULL_NONE),
/* TOUCHPAD_INT_ODL */
PAD_SCI(GPIO_9, PULL_NONE, EDGE_LOW),
- /* S0iX SLP - (unused - goes to EC & FPMCU */
+ /* S0iX SLP - (unused - goes to EC */
PAD_NC(GPIO_10),
/* EC_IN_RW_OD */
PAD_GPI(GPIO_11, PULL_NONE),
@@ -291,6 +291,16 @@ __weak void variant_pcie_gpio_configure(void)
wifi_power_reset_configure_pre_v3();
}
+__weak void finalize_gpios(int slp_typ)
+{
+}
+
+const __weak struct soc_amd_gpio *variant_bootblock_gpio_table(size_t *size, int slp_typ)
+{
+ *size = 0;
+ return NULL;
+}
+
static const struct soc_amd_gpio gpio_sleep_table[] = {
/* PCIE_RST1_L */
PAD_GPO(GPIO_27, LOW),
diff --git a/src/mainboard/google/zork/variants/baseboard/gpio_baseboard_trembyle.c b/src/mainboard/google/zork/variants/baseboard/gpio_baseboard_trembyle.c
index a436d1c3d0..9e980dbe8b 100644
--- a/src/mainboard/google/zork/variants/baseboard/gpio_baseboard_trembyle.c
+++ b/src/mainboard/google/zork/variants/baseboard/gpio_baseboard_trembyle.c
@@ -1,7 +1,9 @@
/* SPDX-License-Identifier: GPL-2.0-or-later */
+#include <acpi/acpi.h>
#include <baseboard/variants.h>
#include <delay.h>
+#include <ec/google/chromeec/ec.h>
#include <gpio.h>
#include <soc/gpio.h>
#include <soc/smi.h>
@@ -32,8 +34,6 @@ static const struct soc_amd_gpio gpio_set_stage_ram[] = {
PAD_SCI(GPIO_9, PULL_NONE, EDGE_LOW),
/* S0iX SLP - (unused - goes to EC & FPMCU */
PAD_NC(GPIO_10),
- /* FPMCU_RST_L */
- PAD_GPO(GPIO_11, HIGH),
/* USI_INT_ODL */
PAD_GPI(GPIO_12, PULL_NONE),
/* EN_PWR_TOUCHPAD_PS2 */
@@ -71,8 +71,6 @@ static const struct soc_amd_gpio gpio_set_stage_ram[] = {
PAD_NF(GPIO_30, ESPI_CS_L, PULL_NONE),
/* EC_AP_INT_ODL (Sensor Framesync) */
PAD_GPI(GPIO_31, PULL_NONE),
- /* EN_PWR_FP */
- PAD_GPO(GPIO_32, HIGH),
/* GPIO_33 - GPIO_39: Not available */
/* NVME_AUX_RESET_L */
PAD_GPO(GPIO_40, HIGH),
@@ -87,7 +85,7 @@ static const struct soc_amd_gpio gpio_set_stage_ram[] = {
PAD_GPO(GPIO_67, LOW), // Select Camera 1 Dmic
/* EMMC_RESET_L */
PAD_GPO(GPIO_68, HIGH),
- /* FPMCU_BOOT0 - TODO: Check this */
+ /* FPMCU_BOOT0 */
PAD_GPO(GPIO_69, LOW),
/* EMMC_CLK */
PAD_NF(GPIO_70, EMMC_CLK, PULL_NONE),
@@ -300,6 +298,51 @@ __weak void variant_pcie_gpio_configure(void)
wifi_power_reset_configure_pre_v3();
}
+__weak void finalize_gpios(int slp_typ)
+{
+ if (variant_has_fingerprint() && slp_typ != ACPI_S3) {
+
+ if (fpmcu_needs_delay())
+ mdelay(550);
+
+ /*
+ * Enable the FPMCU by enabling EN_PWR_FP, then bringing it out
+ * of reset by setting FPMCU_RST_L high 3ms later.
+ */
+ gpio_set(GPIO_32, 1);
+ mdelay(3);
+ gpio_set(GPIO_11, 1);
+ }
+}
+
+static const struct soc_amd_gpio gpio_fingerprint_bootblock_table[] = {
+ /* FPMCU_RST_L */
+ PAD_GPO(GPIO_11, LOW),
+ /* EN_PWR_FP */
+ PAD_GPO(GPIO_32, LOW),
+};
+
+static const struct soc_amd_gpio gpio_no_fingerprint_bootblock_table[] = {
+ /* FPMCU_RST_L */
+ PAD_NC(GPIO_11),
+ /* EN_PWR_FP */
+ PAD_NC(GPIO_32),
+};
+
+const __weak struct soc_amd_gpio *variant_bootblock_gpio_table(size_t *size, int slp_typ)
+{
+ if (variant_has_fingerprint()) {
+ if (slp_typ == ACPI_S3)
+ return NULL;
+
+ *size = ARRAY_SIZE(gpio_fingerprint_bootblock_table);
+ return gpio_fingerprint_bootblock_table;
+ }
+
+ *size = ARRAY_SIZE(gpio_no_fingerprint_bootblock_table);
+ return gpio_no_fingerprint_bootblock_table;
+}
+
static const struct soc_amd_gpio gpio_sleep_table[] = {
/* NVME_AUX_RESET_L */
PAD_GPO(GPIO_40, LOW),
diff --git a/src/mainboard/google/zork/variants/baseboard/helpers.c b/src/mainboard/google/zork/variants/baseboard/helpers.c
index 70710351d2..d12a8ed407 100644
--- a/src/mainboard/google/zork/variants/baseboard/helpers.c
+++ b/src/mainboard/google/zork/variants/baseboard/helpers.c
@@ -149,3 +149,31 @@ int variant_get_daughterboard_id(void)
{
return extract_field(FW_CONFIG_MASK_DB_INDEX, FW_CONFIG_DB_INDEX_SHIFT);
}
+
+bool variant_has_fingerprint(void)
+{
+ if (CONFIG(VARIANT_HAS_FPMCU))
+ return true;
+
+ return false;
+}
+
+bool fpmcu_needs_delay(void)
+{
+ /*
+ * Older board versions need an extra delay here to finish resetting
+ * the FPMCU. The resistor value in the glitch prevention circuit was
+ * sized so that the FPMCU doesn't turn of for ~1 second. On newer
+ * boards, that's been updated to ~30ms, which allows the FPMCU's
+ * reset to be completed in the time between bootblock and finalize.
+ */
+ uint32_t board_version;
+
+ if (google_chromeec_cbi_get_board_version(&board_version))
+ board_version = 1;
+
+ if (board_version <= CONFIG_VARIANT_MAX_BOARD_ID_BROKEN_FMPCU_POWER)
+ return true;
+
+ return false;
+}
diff --git a/src/mainboard/google/zork/variants/baseboard/include/baseboard/variants.h b/src/mainboard/google/zork/variants/baseboard/include/baseboard/variants.h
index 338b918623..4ec6addfe7 100644
--- a/src/mainboard/google/zork/variants/baseboard/include/baseboard/variants.h
+++ b/src/mainboard/google/zork/variants/baseboard/include/baseboard/variants.h
@@ -24,12 +24,17 @@ const struct soc_amd_gpio *variant_base_gpio_table(size_t *size);
*/
const struct soc_amd_gpio *variant_override_gpio_table(size_t *size);
+/* This function provides GPIO init in bootblock. */
+const struct soc_amd_gpio *variant_bootblock_gpio_table(size_t *size, int slp_typ);
+
/*
* This function provides GPIO table for the pads that need to be configured when entering
* sleep.
*/
const struct soc_amd_gpio *variant_sleep_gpio_table(size_t *size, int slp_typ);
+/* Program any required GPIOs at the finalize phase */
+void finalize_gpios(int slp_typ);
/* Modify devictree settings during ramstage. */
void variant_devtree_update(void);
/* Update audio configuration in devicetree during ramstage. */
@@ -69,9 +74,13 @@ bool variant_uses_v3_schematics(void);
bool variant_uses_v3_6_schematics(void);
/* Return true if variant uses CODEC_GPI pin for headphone jack interrupt. */
bool variant_uses_codec_gpi(void);
-/* Return true if variant has active low power enable fow WiFi. */
+/* Return true if variant has active low power enable for WiFi. */
bool variant_has_active_low_wifi_power(void);
/* Return value of daughterboard ID */
int variant_get_daughterboard_id(void);
+/* Return true if the board has a fingerprint sensor. */
+bool variant_has_fingerprint(void);
+/* Return true if the board needs an extra fpmcu delay. */
+bool fpmcu_needs_delay(void);
#endif /* __BASEBOARD_VARIANTS_H__ */
diff --git a/src/mainboard/google/zork/variants/ezkinil/gpio.c b/src/mainboard/google/zork/variants/ezkinil/gpio.c
index d2dd104e89..f86d926e2e 100644
--- a/src/mainboard/google/zork/variants/ezkinil/gpio.c
+++ b/src/mainboard/google/zork/variants/ezkinil/gpio.c
@@ -37,8 +37,6 @@ static const struct soc_amd_gpio ezkinil_bid2_gpio_set_stage_ram[] = {
PAD_NC(GPIO_4),
/* PEN_POWER_EN - Not connected */
PAD_NC(GPIO_5),
- /* FPMCU_RST_L Change NC */
- PAD_NC(GPIO_11),
/* DMIC_SEL */
PAD_GPO(GPIO_13, LOW), // Select Camera 1 Dmic
/* EN_PWR_WIFI */
@@ -62,8 +60,6 @@ static const struct soc_amd_gpio ezkinil_bid3_gpio_set_stage_ram[] = {
PAD_NC(GPIO_4),
/* PEN_POWER_EN - Not connected */
PAD_NC(GPIO_5),
- /* FPMCU_RST_L Change NC */
- PAD_NC(GPIO_11),
/* FPMCU_BOOT0 Change NC */
PAD_NC(GPIO_69),
/* EN_DEV_BEEP_L */
diff --git a/src/mainboard/google/zork/variants/woomax/gpio.c b/src/mainboard/google/zork/variants/woomax/gpio.c
index cb98df7d41..329e7dddb3 100644
--- a/src/mainboard/google/zork/variants/woomax/gpio.c
+++ b/src/mainboard/google/zork/variants/woomax/gpio.c
@@ -10,10 +10,6 @@ static const struct soc_amd_gpio woomax_bid0_gpio_set_stage_ram[] = {
PAD_NC(GPIO_5),
/* GPIO_6 NC */
PAD_NC(GPIO_6),
- /* GPIO_11 NC */
- PAD_NC(GPIO_11),
- /* GPIO_32 NC */
- PAD_NC(GPIO_32),
/* GPIO_69 NC */
PAD_NC(GPIO_69),
/* RAM_ID_4 */
@@ -37,10 +33,6 @@ static const struct soc_amd_gpio woomax_gpio_set_stage_ram[] = {
PAD_NC(GPIO_5),
/* GPIO_6 NC */
PAD_NC(GPIO_6),
- /* GPIO_11 NC */
- PAD_NC(GPIO_11),
- /* GPIO_32 NC */
- PAD_NC(GPIO_32),
/* GPIO_69 NC */
PAD_NC(GPIO_69),
/* RAM_ID_4 */