diff options
| author | Matt DeVillier <matt.devillier@gmail.com> | 2018-01-21 18:32:07 -0600 |
|---|---|---|
| committer | Matt DeVillier <matt.devillier@gmail.com> | 2020-04-03 16:24:17 +0000 |
| commit | a2804781feaa7ba7db198fa03f20be861ccbe4a3 (patch) | |
| tree | 9a51f141132eb0805667c05a8a24908f4793a564 /src/mainboard/google | |
| parent | 8fbfcc3a06d2dde8aa625db123b42cfe29aa0752 (diff) | |
mb/google/cyan: Switch eMMC and SD from ACPI to PCI mode
Braswell boards don't work well with the eMMC and SD controller
in ACPI in payloads other than depthcharge - SeaBIOS requires
an onerous workaround (manually determining the PCI BAR0 address
for each eMMC and SD controller, then adding adding etc/sdcard
entries to the CBFS), and Tianocore can't see the devices at all.
To make the common use-case work better, switch to PCI mode.
Test: build/boot cyan variants with SeaBIOS and Tianocore
payloads, verify eMMC and SD card visible and bootable to
both payloads and OSes.
Change-Id: I71947603e22a37fe2c8ef4eaac8a3aa0d0ed1cec
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40002
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Diffstat (limited to 'src/mainboard/google')
| -rw-r--r-- | src/mainboard/google/cyan/devicetree.cb | 10 |
1 files changed, 5 insertions, 5 deletions
diff --git a/src/mainboard/google/cyan/devicetree.cb b/src/mainboard/google/cyan/devicetree.cb index 328a60817e..b13f3f9e90 100644 --- a/src/mainboard/google/cyan/devicetree.cb +++ b/src/mainboard/google/cyan/devicetree.cb @@ -19,7 +19,7 @@ chip soc/intel/braswell # Set the parameters for SiliconInit ############################################################ - register "PcdSdcardMode" = "PCH_ACPI_MODE" + register "PcdSdcardMode" = "PCH_PCI_MODE" register "PcdEnableHsuart0" = "0" register "PcdEnableHsuart1" = "1" register "PcdEnableAzalia" = "1" @@ -36,7 +36,7 @@ chip soc/intel/braswell register "PcdEnableI2C6" = "0" register "PunitPwrConfigDisable" = "0" # Enable SVID register "ChvSvidConfig" = "SVID_PMIC_CONFIG" - register "PcdEmmcMode" = "PCH_ACPI_MODE" + register "PcdEmmcMode" = "PCH_PCI_MODE" register "PcdUsb3ClkSsc" = "1" register "PcdDispClkSsc" = "1" register "PcdSataClkSsc" = "1" @@ -84,10 +84,10 @@ chip soc/intel/braswell # LPE audio codec settings register "lpe_codec_clk_src" = "LPE_CLK_SRC_XTAL" # 19.2MHz clock - # Enable devices in ACPI mode + # Enable LPSS and LPE devices in ACPI mode register "lpss_acpi_mode" = "1" - register "emmc_acpi_mode" = "1" - register "sd_acpi_mode" = "1" + register "emmc_acpi_mode" = "0" + register "sd_acpi_mode" = "0" register "lpe_acpi_mode" = "1" # Disable SLP_X stretching after SUS power well fail. |