mb/google/rex: Use upstream driver properties for SX9324

Use human readable properties as upstream driver support.

BUG=b:297977526
TEST=Able to get sensor values changed w/wo a hand covering the device.

before this CL , SSD.dsl of STH9324
Package (0x02)
{
"semtech,ph0-pin",
Package (0x03)
{
	Zero,
	Zero,
	Zero
},
...
Package (0x02)
{
	"semtech,ph23-resolution",
	Zero
	},
Package (0x02)
{
	"semtech,startup-sensor",
	Zero
},
....

after this CL , SSD.dsl of STH9324

Package (0x02)
{
"semtech,ph0-pin",
Package (0x03)
{
	One,
	0x02,
	0x02
},
...
Package (0x02)
{
"	semtech,ph23-resolution",
	0x0400
},
Package (0x02)
{
	"semtech,startup-sensor",
	One
},

Change-Id: Ie0d929228f4510f33b07d9c4cfdfcd2a9a437c27
Signed-off-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78174
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>

2 files changed, 47 insertions, 96 deletions

diff --git a/src/mainboard/google/rex/Kconfig b/src/mainboard/google/rex/Kconfig
index 8be8b6f39b..2c68428712 100644
--- a/src/mainboard/google/rex/Kconfig
+++ b/src/mainboard/google/rex/Kconfig
@@ -53,7 +53,6 @@ config BOARD_GOOGLE_MODEL_REX
 	select DRIVERS_GENERIC_MAX98357A
 	select DRIVERS_GENESYSLOGIC_GL9755
 	select DRIVERS_I2C_SX9324
-	select DRIVERS_I2C_SX9324_SUPPORT_LEGACY_LINUX_DRIVER
 	select DRIVERS_INTEL_ISH
 	select DRIVERS_INTEL_SOUNDWIRE
 	select DRIVERS_NXP_UWB_SR1XX
diff --git a/src/mainboard/google/rex/variants/rex0/overridetree.cb b/src/mainboard/google/rex/variants/rex0/overridetree.cb
index 6df91f340c..6c05d9ed93 100644
--- a/src/mainboard/google/rex/variants/rex0/overridetree.cb
+++ b/src/mainboard/google/rex/variants/rex0/overridetree.cb
@@ -692,101 +692,53 @@ chip soc/intel/meteorlake
 				end
 			end
 			chip drivers/i2c/sx9324
-				register "desc" = ""SAR1 Proximity Sensor""
-				register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_E00_IRQ)"
-				register "speed" = "I2C_SPEED_FAST"
-				register "uid" = "1"
-				register "reg_gnrl_ctrl0" = "0x16"
-				register "reg_gnrl_ctrl1" = "0x21"
-				register "reg_afe_ctrl0" = "0x00"
-				register "reg_afe_ctrl1" = "0x10"
-				register "reg_afe_ctrl2" = "0x00"
-				register "reg_afe_ctrl3" = "0x00"
-				register "reg_afe_ctrl4" = "0x07"
-				register "reg_afe_ctrl5" = "0x00"
-				register "reg_afe_ctrl6" = "0x00"
-				register "reg_afe_ctrl7" = "0x07"
-				register "reg_afe_ctrl8" = "0x12"
-				register "reg_afe_ctrl9" = "0x0f"
-				register "reg_prox_ctrl0" = "0x12"
-				register "reg_prox_ctrl1" = "0x12"
-				register "reg_prox_ctrl2" = "0x90"
-				register "reg_prox_ctrl3" = "0x60"
-				register "reg_prox_ctrl4" = "0x0c"
-				register "reg_prox_ctrl5" = "0x12"
-				register "reg_prox_ctrl6" = "0x3c"
-				register "reg_prox_ctrl7" = "0x58"
-				register "reg_adv_ctrl0" = "0x00"
-				register "reg_adv_ctrl1" = "0x00"
-				register "reg_adv_ctrl2" = "0x00"
-				register "reg_adv_ctrl3" = "0x00"
-				register "reg_adv_ctrl4" = "0x00"
-				register "reg_adv_ctrl5" = "0x05"
-				register "reg_adv_ctrl6" = "0x00"
-				register "reg_adv_ctrl7" = "0x00"
-				register "reg_adv_ctrl8" = "0x00"
-				register "reg_adv_ctrl9" = "0x00"
-				register "reg_adv_ctrl10" = "0x5c"
-				register "reg_adv_ctrl11" = "0x52"
-				register "reg_adv_ctrl12" = "0xb5"
-				register "reg_adv_ctrl13" = "0x00"
-				register "reg_adv_ctrl14" = "0x80"
-				register "reg_adv_ctrl15" = "0x0c"
-				register "reg_adv_ctrl16" = "0x38"
-				register "reg_adv_ctrl17" = "0x56"
-				register "reg_adv_ctrl18" = "0x33"
-				register "reg_adv_ctrl19" = "0xf0"
-				register "reg_adv_ctrl20" = "0xf0"
-				device i2c 28 on end
-			end
-			chip drivers/i2c/sx9324
-				register "desc" = ""SAR2 Proximity Sensor""
-				register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_E08_IRQ)"
-				register "speed" = "I2C_SPEED_FAST"
-				register "uid" = "2"
-				register "reg_gnrl_ctrl0" = "0x16"
-				register "reg_gnrl_ctrl1" = "0x21"
-				register "reg_afe_ctrl0" = "0x00"
-				register "reg_afe_ctrl1" = "0x10"
-				register "reg_afe_ctrl2" = "0x00"
-				register "reg_afe_ctrl3" = "0x00"
-				register "reg_afe_ctrl4" = "0x07"
-				register "reg_afe_ctrl5" = "0x00"
-				register "reg_afe_ctrl6" = "0x00"
-				register "reg_afe_ctrl7" = "0x07"
-				register "reg_afe_ctrl8" = "0x12"
-				register "reg_afe_ctrl9" = "0x0f"
-				register "reg_prox_ctrl0" = "0x12"
-				register "reg_prox_ctrl1" = "0x12"
-				register "reg_prox_ctrl2" = "0x90"
-				register "reg_prox_ctrl3" = "0x60"
-				register "reg_prox_ctrl4" = "0x0c"
-				register "reg_prox_ctrl5" = "0x12"
-				register "reg_prox_ctrl6" = "0x3c"
-				register "reg_prox_ctrl7" = "0x58"
-				register "reg_adv_ctrl0" = "0x00"
-				register "reg_adv_ctrl1" = "0x00"
-				register "reg_adv_ctrl2" = "0x00"
-				register "reg_adv_ctrl3" = "0x00"
-				register "reg_adv_ctrl4" = "0x00"
-				register "reg_adv_ctrl5" = "0x05"
-				register "reg_adv_ctrl6" = "0x00"
-				register "reg_adv_ctrl7" = "0x00"
-				register "reg_adv_ctrl8" = "0x00"
-				register "reg_adv_ctrl9" = "0x00"
-				register "reg_adv_ctrl10" = "0x5c"
-				register "reg_adv_ctrl11" = "0x52"
-				register "reg_adv_ctrl12" = "0xb5"
-				register "reg_adv_ctrl13" = "0x00"
-				register "reg_adv_ctrl14" = "0x80"
-				register "reg_adv_ctrl15" = "0x0c"
-				register "reg_adv_ctrl16" = "0x38"
-				register "reg_adv_ctrl17" = "0x56"
-				register "reg_adv_ctrl18" = "0x33"
-				register "reg_adv_ctrl19" = "0xf0"
-				register "reg_adv_ctrl20" = "0xf0"
-				device i2c 2C on end
-			end
+                               register "desc" = ""SAR Proximity Sensor""
+                               register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_E00_IRQ)"
+                               register "speed" = "I2C_SPEED_FAST"
+                               register "uid" = "1"
+                               register "ph0_pin" = "{1, 2, 2}"
+                               register "ph1_pin" = "{2, 1, 2}"
+                               register "ph2_pin" = "{2, 2, 1}"
+                               register "ph3_pin" = "{2, 1, 1}"
+                               register "ph01_resolution" = "1024"
+                               register "ph23_resolution" = "1024"
+                               register "startup_sensor" = "1"
+                               register "ph01_proxraw_strength" = "2"
+                               register "ph23_proxraw_strength" = "2"
+                               register "avg_pos_strength" = "256"
+                               register "cs_idle_sleep" = ""hi-z""
+                               register "int_comp_resistor" = ""lowest""
+                               register "input_precharge_resistor_ohms" = "4000"
+                               register "input_analog_gain" = "1"
+                               device i2c 28 on
+                                        probe CELLULAR CELLULAR_USB
+                                        probe CELLULAR CELLULAR_PCIE
+                               end
+                          end
+                          chip drivers/i2c/sx9324
+                               register "desc" = ""SAR Proximity Sensor""
+                               register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_E08_IRQ)"
+                               register "speed" = "I2C_SPEED_FAST"
+                               register "uid" = "2"
+                               register "ph0_pin" = "{1, 2, 2}"
+                               register "ph1_pin" = "{2, 1, 2}"
+                               register "ph2_pin" = "{2, 2, 1}"
+                               register "ph3_pin" = "{2, 1, 1}"
+                               register "ph01_resolution" = "1024"
+                               register "ph23_resolution" = "1024"
+                               register "startup_sensor" = "1"
+                               register "ph01_proxraw_strength" = "2"
+                               register "ph23_proxraw_strength" = "2"
+                               register "avg_pos_strength" = "256"
+                               register "cs_idle_sleep" = ""hi-z""
+                               register "int_comp_resistor" = ""lowest""
+                               register "input_precharge_resistor_ohms" = "4000"
+                               register "input_analog_gain" = "1"
+                               device i2c 2c on
+                                        probe CELLULAR CELLULAR_USB
+                                        probe CELLULAR CELLULAR_PCIE
+                               end
+                          end
 		end #I2C5
 		device ref pcie_rp5 on
 			probe WIFI WIFI_PCIE