mb/google/poppy/variants/rammus: add rammus devicetree.cb

Use the default value for Iccmax which is specified in vr_config.c.
The AcLoadline and DcLoadline keep the poppy value. Besides, the
USB 2.0 ports located on the mainboard are set to USB2_PORT_SHORT
and the others on the daughterboard are set to USB2_PORT_LONG.
Those setting need to be fine tuned later.

BUG=b:111579386
BRANCH=Master
TEST=Build pass

Change-Id: Icabfac04c94b3d480872c243d811509e274ef122
Signed-off-by: Zhuohao Lee <zhuohao@chromium.org>
Reviewed-on: https://review.coreboot.org/27808
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>

1 files changed, 336 insertions, 0 deletions

diff --git a/src/mainboard/google/poppy/variants/rammus/devicetree.cb b/src/mainboard/google/poppy/variants/rammus/devicetree.cb
new file mode 100644
index 0000000000..78de3caba8
--- /dev/null
+++ b/src/mainboard/google/poppy/variants/rammus/devicetree.cb
@@ -0,0 +1,336 @@
+chip soc/intel/skylake
+
+	# Deep Sx states
+	register "deep_s3_enable_ac" = "0"
+	register "deep_s3_enable_dc" = "0"
+	register "deep_s5_enable_ac" = "1"
+	register "deep_s5_enable_dc" = "1"
+	register "deep_sx_config" = "DSX_EN_LAN_WAKE_PIN | DSX_EN_WAKE_PIN | DSX_DIS_AC_PRESENT_PD"
+
+	# GPE configuration
+	# Note that GPE events called out in ASL code rely on this
+	# route. i.e. If this route changes then the affected GPE
+	# offset bits also need to be changed.
+	register "gpe0_dw0" = "GPP_B"
+	register "gpe0_dw1" = "GPP_D"
+	register "gpe0_dw2" = "GPP_E"
+
+	# EC host command ranges are in 0x800-0x8ff & 0x200-0x20f
+	register "gen1_dec" = "0x00fc0801"
+	register "gen2_dec" = "0x000c0201"
+	# EC memory map range is 0x900-0x9ff
+	register "gen3_dec" = "0x00fc0901"
+
+	# Enable DPTF
+	register "dptf_enable" = "1"
+
+	# Enable S0ix
+	register "s0ix_enable" = "1"
+
+	# FSP Configuration
+	register "ProbelessTrace" = "0"
+	register "EnableLan" = "0"
+	register "EnableSata" = "0"
+	register "SataSalpSupport" = "0"
+	register "SataMode" = "0"
+	register "SataPortsEnable[0]" = "0"
+	register "EnableAzalia" = "1"
+	register "DspEnable" = "1"
+	register "IoBufferOwnership" = "3"
+	register "EnableTraceHub" = "0"
+	register "SsicPortEnable" = "0"
+	register "SmbusEnable" = "1"
+	register "Cio2Enable" = "1"
+	register "SaImguEnable" = "1"
+	register "ScsEmmcEnabled" = "1"
+	register "ScsEmmcHs400Enabled" = "1"
+	register "ScsSdCardEnabled" = "2"
+	register "PttSwitch" = "0"
+	register "InternalGfx" = "1"
+	register "SkipExtGfxScan" = "1"
+	register "Device4Enable" = "1"
+	register "HeciEnabled" = "0"
+	register "SaGv" = "3"
+	register "SerialIrqConfigSirqEnable" = "1"
+	register "PmConfigSlpS3MinAssert" = "2"        # 50ms
+	register "PmConfigSlpS4MinAssert" = "1"        # 1s
+	register "PmConfigSlpSusMinAssert" = "1"       # 500ms
+	register "PmConfigSlpAMinAssert" = "3"         # 2s
+	register "PmTimerDisabled" = "1"
+	register "VmxEnable" = "1"
+
+	register "pirqa_routing" = "PCH_IRQ11"
+	register "pirqb_routing" = "PCH_IRQ10"
+	register "pirqc_routing" = "PCH_IRQ11"
+	register "pirqd_routing" = "PCH_IRQ11"
+	register "pirqe_routing" = "PCH_IRQ11"
+	register "pirqf_routing" = "PCH_IRQ11"
+	register "pirqg_routing" = "PCH_IRQ11"
+	register "pirqh_routing" = "PCH_IRQ11"
+
+	# VR Settings Configuration for 4 Domains
+	#+----------------+-------+-------+-------+-------+
+	#| Domain/Setting |  SA   |  IA   | GTUS  |  GTS  |
+	#+----------------+-------+-------+-------+-------+
+	#| Psi1Threshold  | 20A   | 20A   | 20A   | 20A   |
+	#| Psi2Threshold  | 2A    | 2A    | 2A    | 2A    |
+	#| Psi3Threshold  | 1A    | 1A    | 1A    | 1A    |
+	#| Psi3Enable     | 1     | 1     | 1     | 1     |
+	#| Psi4Enable     | 1     | 1     | 1     | 1     |
+	#| ImonSlope      | 0     | 0     | 0     | 0     |
+	#| ImonOffset     | 0     | 0     | 0     | 0     |
+	#| VrVoltageLimit | 1.52V | 1.52V | 1.52V | 1.52V |
+	#| AcLoadline     | 15    | 5.7   | 5.5   | 5.5   |
+	#| DcLoadline     | 14.3  | 4.83  | 4.2   | 4.2   |
+	#+----------------+-------+-------+-------+-------+
+	register "domain_vr_config[VR_SYSTEM_AGENT]" = "{
+		.vr_config_enable = 1,
+		.psi1threshold = VR_CFG_AMP(20),
+		.psi2threshold = VR_CFG_AMP(2),
+		.psi3threshold = VR_CFG_AMP(1),
+		.psi3enable = 1,
+		.psi4enable = 1,
+		.imon_slope = 0x0,
+		.imon_offset = 0x0,
+		.voltage_limit = 1520,
+		.ac_loadline = 1500,
+		.dc_loadline = 1430,
+	}"
+
+	register "domain_vr_config[VR_IA_CORE]" = "{
+		.vr_config_enable = 1,
+		.psi1threshold = VR_CFG_AMP(20),
+		.psi2threshold = VR_CFG_AMP(2),
+		.psi3threshold = VR_CFG_AMP(1),
+		.psi3enable = 1,
+		.psi4enable = 1,
+		.imon_slope = 0x0,
+		.imon_offset = 0x0,
+		.voltage_limit = 1520,
+		.ac_loadline = 570,
+		.dc_loadline = 483,
+	}"
+
+	register "domain_vr_config[VR_GT_UNSLICED]" = "{
+		.vr_config_enable = 1,
+		.psi1threshold = VR_CFG_AMP(20),
+		.psi2threshold = VR_CFG_AMP(2),
+		.psi3threshold = VR_CFG_AMP(1),
+		.psi3enable = 1,
+		.psi4enable = 1,
+		.imon_slope = 0x0,
+		.imon_offset = 0x0,
+		.voltage_limit = 1520,
+		.ac_loadline = 550,
+		.dc_loadline = 420,
+	}"
+
+	register "domain_vr_config[VR_GT_SLICED]" = "{
+		.vr_config_enable = 1,
+		.psi1threshold = VR_CFG_AMP(20),
+		.psi2threshold = VR_CFG_AMP(2),
+		.psi3threshold = VR_CFG_AMP(1),
+		.psi3enable = 1,
+		.psi4enable = 1,
+		.imon_slope = 0x0,
+		.imon_offset = 0x0,
+		.voltage_limit = 1520,
+		.ac_loadline = 550,
+		.dc_loadline = 420,
+	}"
+
+	# Enable Root port 1.
+	register "PcieRpEnable[0]" = "1"
+	# Enable CLKREQ#
+	register "PcieRpClkReqSupport[0]" = "1"
+	# RP 1 uses SRCCLKREQ1#
+	register "PcieRpClkReqNumber[0]" = "1"
+	# RP 1 uses uses CLK SRC 1
+	register "PcieRpClkSrcNumber[0]" = "1"
+	# RP 1, Enable Advanced Error Reporting
+	register "PcieRpAdvancedErrorReporting[0]" = "1"
+	# RP 1, Enable Latency Tolerance Reporting Mechanism
+	register "PcieRpLtrEnable[0]" = "1"
+
+	register "usb2_ports[0]" = "USB2_PORT_SHORT(OC0)"	# Type-C Port 1
+	register "usb2_ports[1]" = "USB2_PORT_LONG(OC3)"	# Type-A Port
+	register "usb2_ports[2]" = "USB2_PORT_SHORT(OC_SKIP)"	# Bluetooth
+	register "usb2_ports[4]" = "USB2_PORT_LONG(OC1)"	# Type-C Port 2
+	register "usb2_ports[6]" = "USB2_PORT_SHORT(OC_SKIP)"	# H1
+	register "usb2_ports[8]" = "USB2_PORT_SHORT(OC_SKIP)"	# Camera
+
+	register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)"	# Type-C Port 1
+	register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC1)"	# Type-C Port 2
+	register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC3)"	# Type-A Port
+	register "usb3_ports[3]" = "USB3_PORT_EMPTY"		# Empty
+
+	# Intel Common SoC Config
+	#+-------------------+---------------------------+
+	#| Field             |  Value                    |
+	#+-------------------+---------------------------+
+	#| chipset_lockdown  | CHIPSET_LOCKDOWN_COREBOOT |
+	#| I2C0              | Touchscreen               |
+	#| I2C1              | Trackpad                  |
+	#| I2C5              | Audio                     |
+	#+-------------------+---------------------------+
+	register "common_soc_config" = "{
+		.chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT,
+		.i2c[0] = {
+			.speed = I2C_SPEED_FAST,
+			.speed_config[0] = {
+				.speed = I2C_SPEED_FAST,
+				.scl_lcnt = 190,
+				.scl_hcnt = 100,
+				.sda_hold = 36,
+			},
+		},
+		.i2c[1] = {
+			.speed = I2C_SPEED_FAST,
+			.speed_config[0] = {
+				.speed = I2C_SPEED_FAST,
+				.scl_lcnt = 190,
+				.scl_hcnt = 100,
+				.sda_hold = 36,
+			},
+			.early_init = 1,
+		},
+		.i2c[5] = {
+			.speed = I2C_SPEED_FAST,
+			.speed_config[0] = {
+				.speed = I2C_SPEED_FAST,
+				.scl_lcnt = 190,
+				.scl_hcnt = 100,
+				.sda_hold = 36,
+			},
+		},
+	}"
+
+	# Touchscreen
+	register "i2c_voltage[0]" = "I2C_VOLTAGE_3V3"
+
+	# Trackpad
+	register "i2c_voltage[1]" = "I2C_VOLTAGE_3V3"
+
+	# Audio
+	register "i2c_voltage[5]" = "I2C_VOLTAGE_1V8"
+
+	# Must leave UART0 enabled or SD/eMMC will not work as PCI
+	register "SerialIoDevMode" = "{
+		[PchSerialIoIndexI2C0]  = PchSerialIoPci,
+		[PchSerialIoIndexI2C1]  = PchSerialIoPci,
+		[PchSerialIoIndexI2C2]  = PchSerialIoDisabled,
+		[PchSerialIoIndexI2C3]  = PchSerialIoDisabled,
+		[PchSerialIoIndexI2C4]  = PchSerialIoDisabled,
+		[PchSerialIoIndexI2C5]  = PchSerialIoPci,
+		[PchSerialIoIndexSpi0]  = PchSerialIoPci,
+		[PchSerialIoIndexSpi1]  = PchSerialIoDisabled,
+		[PchSerialIoIndexUart0] = PchSerialIoPci,
+		[PchSerialIoIndexUart1] = PchSerialIoDisabled,
+		[PchSerialIoIndexUart2] = PchSerialIoSkipInit,
+	}"
+
+	register "speed_shift_enable" = "1"
+	register "psys_pmax" = "45"
+	# PL2 override 18W for AML-Y
+	register "tdp_pl2_override" = "18"
+	register "tcc_offset" = "10"     # TCC of 90C
+
+	# Use default SD card detect GPIO configuration
+	register "sdcard_cd_gpio_default" = "GPP_E15"
+
+	# PCH Trip Temperature in degree C
+	register "pch_trip_temp" = "75"
+
+	device cpu_cluster 0 on
+		device lapic 0 on end
+	end
+	device domain 0 on
+		device pci 00.0 on  end # Host Bridge
+		device pci 02.0 on  end # Integrated Graphics Device
+		device pci 14.0 on  end # USB xHCI
+		device pci 14.1 on  end # USB xDCI (OTG)
+		device pci 14.2 on  end # Thermal Subsystem
+		device pci 15.0 on  end # I2C #0
+		device pci 15.1 on
+			chip drivers/i2c/generic
+				register "hid" = ""ELAN0000""
+				register "desc" = ""ELAN Touchpad""
+				register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_B3_IRQ)"
+				register "wake" = "GPE0_DW0_05" # GPP_B5
+				device i2c 15 on end
+			end
+		end # I2C #1
+		device pci 15.2 off end # I2C #2
+		device pci 15.3 off end # I2C #3
+		device pci 16.0 on  end # Management Engine Interface 1
+		device pci 16.1 off end # Management Engine Interface 2
+		device pci 16.2 off end # Management Engine IDE-R
+		device pci 16.3 off end # Management Engine KT Redirection
+		device pci 16.4 off end # Management Engine Interface 3
+		device pci 17.0 off end # SATA
+		device pci 19.0 on  end # UART #2
+		device pci 19.1 on
+			chip drivers/i2c/max98927
+				register "interleave_mode" = "1"
+				register "vmon_slot_no" = "4"
+				register "imon_slot_no" = "5"
+				register "uid" = "0"
+				register "desc" = ""SSM4567 Right Speaker Amp""
+				register "name" = ""MAXR""
+				device i2c 39 on end
+			end
+			chip drivers/i2c/max98927
+				register "interleave_mode" = "1"
+				register "vmon_slot_no" = "6"
+				register "imon_slot_no" = "7"
+				register "uid" = "1"
+				register "desc" = ""SSM4567 Left Speaker Amp""
+				register "name" = ""MAXL""
+				device i2c 3A on end
+			end
+		end # I2C #5
+		device pci 19.2 off end # I2C #4
+		device pci 1c.0 on
+			chip drivers/intel/wifi
+				register "wake" = "GPE0_DW0_00" # GPP_B0
+				device pci 00.0 on end
+			end
+		end # PCI Express Port 1
+		device pci 1c.1 off end # PCI Express Port 2
+		device pci 1c.2 off end # PCI Express Port 3
+		device pci 1c.3 off end # PCI Express Port 4
+		device pci 1c.4 off end # PCI Express Port 5
+		device pci 1c.5 off end # PCI Express Port 6
+		device pci 1c.6 off end # PCI Express Port 7
+		device pci 1c.7 off end # PCI Express Port 8
+		device pci 1d.0 off end # PCI Express Port 9
+		device pci 1d.1 off end # PCI Express Port 10
+		device pci 1d.2 off end # PCI Express Port 11
+		device pci 1d.3 off end # PCI Express Port 12
+		device pci 1e.0 on  end # UART #0
+		device pci 1e.1 off end # UART #1
+		device pci 1e.2 on
+			chip drivers/spi/acpi
+				register "hid" = "ACPI_DT_NAMESPACE_HID"
+				register "compat_string" = ""google,cr50""
+				register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_E0_IRQ)"
+				device spi 0 on end
+			end
+		end # GSPI #0
+		device pci 1e.3 off end # GSPI #1
+		device pci 1e.4 on  end # eMMC
+		device pci 1e.5 off end # SDIO
+		device pci 1e.6 on end # SDCard
+		device pci 1f.0 on
+			chip ec/google/chromeec
+				device pnp 0c09.0 on end
+			end
+		end # LPC Interface
+		device pci 1f.1 on  end # P2SB
+		device pci 1f.2 on  end # Power Management Controller
+		device pci 1f.3 on  end # Intel HDA
+		device pci 1f.4 on  end # SMBus
+		device pci 1f.5 on  end # PCH SPI
+		device pci 1f.6 off end # GbE
+	end
+end