diff options
| author | Furquan Shaikh <furquan@chromium.org> | 2018-01-10 23:53:18 -0800 |
|---|---|---|
| committer | Martin Roth <martinroth@google.com> | 2018-01-12 18:16:42 +0000 |
| commit | 3b543a2dfe1c3534da26f1c5855444eb86e0cfd0 (patch) | |
| tree | a9e767f714e82e9a8b370ca6c3a8988df116fc6f /src/mainboard/google/poppy/variants | |
| parent | a4b253a4b423c8eb85b47015a129d086415dece9 (diff) | |
mb/google/poppy: Remove digitizer reset control from ACPI
Digitizer power is not controlled by SoC. Also, since the digitizer
uses I2C-HID driver in Linux kernel, the device is put into sleep
anytime system is suspended. Thus, there is no need to control the
reset gpio using ACPI power resource.
TEST=Verified that digitizer device is properly detected on boot-up
and after suspend/resume.
Change-Id: Id11b8412d0ac48b2701d53b0a22ad3b747b544ec
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/23212
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Diffstat (limited to 'src/mainboard/google/poppy/variants')
| -rw-r--r-- | src/mainboard/google/poppy/variants/baseboard/devicetree.cb | 4 | ||||
| -rw-r--r-- | src/mainboard/google/poppy/variants/baseboard/gpio.c | 2 |
2 files changed, 1 insertions, 5 deletions
diff --git a/src/mainboard/google/poppy/variants/baseboard/devicetree.cb b/src/mainboard/google/poppy/variants/baseboard/devicetree.cb index aaf6ea2b57..89dc22a618 100644 --- a/src/mainboard/google/poppy/variants/baseboard/devicetree.cb +++ b/src/mainboard/google/poppy/variants/baseboard/devicetree.cb @@ -311,10 +311,6 @@ chip soc/intel/skylake register "generic.desc" = ""WCOM Digitizer"" register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_D1_IRQ)" register "generic.wake" = "GPE0_DW1_12" - register "generic.has_power_resource" = "1" - register "generic.disable_gpio_export_in_crs" = "1" - register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D3)" - register "generic.reset_delay_ms" = "1" register "hid_desc_reg_offset" = "0x1" device i2c 0x9 on end end diff --git a/src/mainboard/google/poppy/variants/baseboard/gpio.c b/src/mainboard/google/poppy/variants/baseboard/gpio.c index 8b9a21b55a..1290d18375 100644 --- a/src/mainboard/google/poppy/variants/baseboard/gpio.c +++ b/src/mainboard/google/poppy/variants/baseboard/gpio.c @@ -167,7 +167,7 @@ static const struct pad_config gpio_table[] = { /* D2 : SPI1_MISO ==> PEN_PDCT_L */ PAD_CFG_GPI_GPIO_DRIVER(GPP_D2, NONE, DEEP), /* D3 : SPI1_MOSI ==> PEN_RST_L */ - PAD_CFG_GPO(GPP_D3, 0, DEEP), + PAD_CFG_GPO(GPP_D3, 1, DEEP), /* D4 : FASHTRIG ==> LTE_GPS_OFF_ODL */ PAD_CFG_GPO(GPP_D4, 1, DEEP), /* D5 : ISH_I2C0_SDA ==> ISH_I2C_SENSOR_1V8_SDA */ |