soc/intel/apollolake: Don't use pulldowns in standby state for 1.8/3.3V pins.

These pins should not have pull downs configured in standby state as that
can cause contention on the termination circuitry and lead to incorrect
behavior as per Doc# 572688 Gemini Lake Processor GPIOTermination
Configuration.

Furthermore, some of these pins were configured with normal termination
of None which would as per above mentioned document lead to a standby
termination of None anyways.

Instead of pull downs, use the IOSSTATE setting for driving low
via the Tx mode.

BUG=b:79874891, b:79494332, b:79982669
BRANCH=None
TEST=Flashed image and booted to OS on Yorp. Touchscreen does not
consume power in suspend state.

Change-Id: I7dcf3691b969d018b3cfb6af3f7467c9b523fee5
Signed-off-by: Shamile Khan <shamile.khan@intel.com>
Reviewed-on: https://review.coreboot.org/26491
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>

2 files changed, 14 insertions, 14 deletions

diff --git a/src/mainboard/google/octopus/variants/baseboard/gpio.c b/src/mainboard/google/octopus/variants/baseboard/gpio.c
index 667c5f4dcc..f839850a99 100644
--- a/src/mainboard/google/octopus/variants/baseboard/gpio.c
+++ b/src/mainboard/google/octopus/variants/baseboard/gpio.c
@@ -143,8 +143,8 @@ static const struct pad_config gpio_table[] = {
 	PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_101, NONE, DEEP, NF1),/* PMU_SLP_S3_B */
 	PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_102, NONE, DEEP, NF1),/* PMU_SLP_S4_B */
 	PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_103, NONE, DEEP, NF1),/* SUSPWRDNACK */
-	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_104, NONE, DEEP, NF1, HIZCRx0, ENPD),/* EMMC_DNX_PWR_EN_B */
-	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_105, 0, DEEP, NONE, HIZCRx0, ENPD),/* GPIO_105 -- TOUCHSCREEN_RST */
+	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_104, NONE, DEEP, NF1, HIZCRx0, DISPUPD),/* EMMC_DNX_PWR_EN_B - unused */
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_105, 0, DEEP, NONE, Tx1RXDCRx0, DISPUPD),/* GPIO_105 -- TOUCHSCREEN_RST */
 	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_106, UP_20K, DEEP, NF1, HIZCRx1, ENPU),/* PMU_BATLOW_B */
 	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_107, NONE, DEEP, NF1, TxDRxE, DISPUPD),/* PMU_RESETBUTTON_B */
 	PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_108, NONE, DEEP, NF1),/* PMU_SUSCLK */
@@ -172,7 +172,7 @@ static const struct pad_config gpio_table[] = {
 	/* PCIE_CLKREQ[0:3]_B */
 	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_120, UP_20K, DEEP, NF1, HIZCRx1, ENPU),/* PCIE_CLKREQ0_B -- unused*/
 	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_121, UP_20K, DEEP, NF1, HIZCRx1, ENPU),/* PCIE_CLKREQ1_B -- unused */
-	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_122, 0, DEEP, DN_20K, HIZCRx0, ENPD),/* PCIE_CLKREQ2_B -- EN_PP3300_WLAN */
+	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_122, UP_20K, DEEP, NF1, HIZCRx1, ENPU),/* PCIE_CLKREQ2_B -- unused */
 	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_123, UP_20K, DEEP, NF1, TxDRxE, DISPUPD), /* PCIE_CLKREQ3_B */
 
 	/* DDI[0:1] SDA and SCL -- unused */
@@ -182,9 +182,9 @@ static const struct pad_config gpio_table[] = {
 	PAD_CFG_GPIO_HI_Z(GPIO_127, NONE, DEEP, HIZCRx0, DISPUPD),/* HV_DDI1_DDC_SCL -- unused */
 
 	/* Panel 0 control */
-	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_128, NONE, DEEP, NF1, HIZCRx0, ENPD),/* PANEL0_VDDEN*/
-	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_129, DN_20K, DEEP, NF1, HIZCRx0, ENPD),/* PANEL0_BKLTEN */
-	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_130, DN_20K, DEEP, NF1, HIZCRx0, ENPD),/* PANEL0_BKLTCTL */
+	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_128, NONE, DEEP, NF1, Tx0RxDCRx0, DISPUPD),/* PANEL0_VDDEN*/
+	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_129, NONE, DEEP, NF1, Tx0RxDCRx0, DISPUPD),/* PANEL0_BKLTEN */
+	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_130, NONE, DEEP, NF1, Tx0RxDCRx0, DISPUPD),/* PANEL0_BKLTCTL */
 
 	/* Hot plug detect. */
 	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_131, NONE, DEEP, NF1, HIZCRx1, DISPUPD),/* HV_DDI0_HPD */
@@ -198,7 +198,7 @@ static const struct pad_config gpio_table[] = {
 	PAD_CFG_GPI_APIC_IOS(GPIO_137, NONE, DEEP, LEVEL, INVERT, HIZCRx1, DISPUPD),/* GPIO_137 -- HP_INT_ODL */
 	PAD_CFG_GPI(GPIO_138, NONE, DEEP),/* GPIO_138 -- PEN_PDCT_ODL */
 	PAD_CFG_GPI_APIC_IOS(GPIO_139, NONE, DEEP, LEVEL, INVERT, HIZCRx1, DISPUPD),/* GPIO_138 -- PEN_INT_ODL */
-	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_140, 0, DEEP, NONE, HIZCRx0, ENPD),/* GPIO_140 -- PEN_RESET */
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_140, 0, DEEP, NONE, Tx1RXDCRx0, DISPUPD),/* GPIO_140 -- PEN_RESET */
 	// TODO check if it is ok to set to GPIROUTSCI (as in Coral/Reef and others).
 	// Settings here do not match table
 	// Also we may be able to use eSPI WAKE# Virtual Wire instead
diff --git a/src/mainboard/google/octopus/variants/bip/gpio.c b/src/mainboard/google/octopus/variants/bip/gpio.c
index fb1ea88efc..17fc1050f3 100644
--- a/src/mainboard/google/octopus/variants/bip/gpio.c
+++ b/src/mainboard/google/octopus/variants/bip/gpio.c
@@ -141,8 +141,8 @@ static const struct pad_config gpio_table[] = {
 	PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_101, NONE, DEEP, NF1),/* PMU_SLP_S3_B */
 	PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_102, NONE, DEEP, NF1),/* PMU_SLP_S4_B */
 	PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_103, NONE, DEEP, NF1),/* SUSPWRDNACK */
-	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_104, NONE, DEEP, NF1, HIZCRx0, ENPD),/* EMMC_DNX_PWR_EN_B */
-	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_105, 0, DEEP, NONE, HIZCRx0, ENPD),/* GPIO_105 -- TOUCHSCREEN_RST */
+	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_104, NONE, DEEP, NF1, HIZCRx0, DISPUPD),/* EMMC_DNX_PWR_EN_B - unused */
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_105, 0, DEEP, NONE, Tx1RXDCRx0, DISPUPD),/* GPIO_105 -- TOUCHSCREEN_RST */
 	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_106, UP_20K, DEEP, NF1, HIZCRx1, ENPU),/* PMU_BATLOW_B */
 	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_107, NONE, DEEP, NF1, TxDRxE, DISPUPD),/* PMU_RESETBUTTON_B */
 	PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_108, NONE, DEEP, NF1),/* PMU_SUSCLK */
@@ -170,7 +170,7 @@ static const struct pad_config gpio_table[] = {
 	/* PCIE_CLKREQ[0:3]_B */
 	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_120, UP_20K, DEEP, NF1, HIZCRx1, ENPU),/* PCIE_CLKREQ0_B -- unused*/
 	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_121, UP_20K, DEEP, NF1, HIZCRx1, ENPU),/* PCIE_CLKREQ1_B -- unused */
-	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_122, 0, DEEP, DN_20K, HIZCRx0, ENPD),/* PCIE_CLKREQ2_B -- EN_PP3300_WLAN */
+	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_122, UP_20K, DEEP, NF1, HIZCRx1, ENPU),/* PCIE_CLKREQ2_B -- unused */
 	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_123, UP_20K, DEEP, NF1, TxDRxE, DISPUPD), /* PCIE_CLKREQ3_B */
 
 	/* DDI[0:1] SDA and SCL -- unused */
@@ -180,9 +180,9 @@ static const struct pad_config gpio_table[] = {
 	PAD_CFG_GPIO_HI_Z(GPIO_127, NONE, DEEP, HIZCRx0, DISPUPD),/* HV_DDI1_DDC_SCL -- unused */
 
 	/* Panel 0 control */
-	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_128, NONE, DEEP, NF1, HIZCRx0, ENPD),/* PANEL0_VDDEN*/
-	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_129, DN_20K, DEEP, NF1, HIZCRx0, ENPD),/* PANEL0_BKLTEN */
-	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_130, DN_20K, DEEP, NF1, HIZCRx0, ENPD),/* PANEL0_BKLTCTL */
+	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_128, NONE, DEEP, NF1, Tx0RxDCRx0, DISPUPD),/* PANEL0_VDDEN*/
+	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_129, NONE, DEEP, NF1, Tx0RxDCRx0, DISPUPD),/* PANEL0_BKLTEN */
+	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_130, NONE, DEEP, NF1, Tx0RxDCRx0, DISPUPD),/* PANEL0_BKLTCTL */
 
 	/* Hot plug detect. */
 	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_131, NONE, DEEP, NF1, HIZCRx1, DISPUPD),/* HV_DDI0_HPD */
@@ -196,7 +196,7 @@ static const struct pad_config gpio_table[] = {
 	PAD_CFG_GPI_APIC_IOS(GPIO_137, NONE, DEEP, LEVEL, INVERT, HIZCRx1, DISPUPD),/* GPIO_137 -- HP_INT_ODL */
 	PAD_CFG_GPI(GPIO_138, NONE, DEEP),/* GPIO_138 -- PEN_PDCT_ODL */
 	PAD_CFG_GPI_APIC_IOS(GPIO_139, NONE, DEEP, LEVEL, INVERT, HIZCRx1, DISPUPD),/* GPIO_138 -- PEN_INT_ODL */
-	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_140, 0, DEEP, NONE, HIZCRx0, ENPD),/* GPIO_140 -- PEN_RESET */
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_140, 0, DEEP, NONE, Tx1RXDCRx0, DISPUPD),/* GPIO_140 -- PEN_RESET */
 	// TODO check if it is ok to set to GPIROUTSCI (as in Coral/Reef and others).
 	// Settings here do not match table
 	// Also we may be able to use eSPI WAKE# Virtual Wire instead