diff options
author | Kevin Chiu <Kevin.Chiu@quantatw.com> | 2019-05-16 11:16:18 +0800 |
---|---|---|
committer | Patrick Georgi <pgeorgi@google.com> | 2019-05-21 10:20:33 +0000 |
commit | b19de28c9889675125183f350e2a35f60e142562 (patch) | |
tree | 75d78a1243f02ca54fa4550287eda176df51d9c0 /src/mainboard/google/octopus/variants/garg/overridetree.cb | |
parent | a172228b7a66454a34b331fff10d6d0bb03ab634 (diff) |
mb/google/octopus: Create Garg variant
This commit creates a garg variant for Octopus. The initial settings
override the baseboard was copied from variant bobba.
BUG=b:132668378
BRANCH=master
TEST=emerge-octopus coreboot
Change-Id: I9a36bc5dc3d2b891b1bce86015aa264894d1434b
Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32835
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Diffstat (limited to 'src/mainboard/google/octopus/variants/garg/overridetree.cb')
-rw-r--r-- | src/mainboard/google/octopus/variants/garg/overridetree.cb | 180 |
1 files changed, 180 insertions, 0 deletions
diff --git a/src/mainboard/google/octopus/variants/garg/overridetree.cb b/src/mainboard/google/octopus/variants/garg/overridetree.cb new file mode 100644 index 0000000000..0230a29a89 --- /dev/null +++ b/src/mainboard/google/octopus/variants/garg/overridetree.cb @@ -0,0 +1,180 @@ +chip soc/intel/apollolake + + # EMMC Tx CMD Delay + # Refer to EDS-Vol2-16.32. + # [14:8] steps of delay for DDR mode, each 125ps. + # [6:0] steps of delay for SDR mode, each 125ps. + register "emmc_tx_cmd_cntl" = "0x505" + + # EMMC TX DATA Delay 1 + # Refer to EDS-Vol2-16.33. + # [14:8] steps of delay for HS400, each 125ps. + # [6:0] steps of delay for SDR104/HS200, each 125ps. + register "emmc_tx_data_cntl1" = "0x0a0b" + + # EMMC TX DATA Delay 2 + # Refer to EDS-Vol2-16.34. + # [30:24] steps of delay for SDR50, each 125ps. + # [22:16] steps of delay for DDR50, each 125ps. + # [14:8] steps of delay for SDR25/HS50, each 125ps. + # [6:0] steps of delay for SDR12, each 125ps. + register "emmc_tx_data_cntl2" = "0x1c272828" + + # EMMC RX CMD/DATA Delay 1 + # Refer to EDS-Vol2-16.35. + # [30:24] steps of delay for SDR50, each 125ps. + # [22:16] steps of delay for DDR50, each 125ps. + # [14:8] steps of delay for SDR25/HS50, each 125ps. + # [6:0] steps of delay for SDR12, each 125ps. + register "emmc_rx_cmd_data_cntl1" = "0x00181b1a" + + # EMMC RX CMD/DATA Delay 2 + # Refer to EDS-Vol2-16.37. + # [17:16] stands for Rx Clock before Output Buffer + # [14:8] steps of delay for Auto Tuning Mode, each 125ps. + # [6:0] steps of delay for HS200, each 125ps. + register "emmc_rx_cmd_data_cntl2" = "0x10021" + + # EMMC Rx Strobe Delay + # Refer to EDS-Vol2-16.36. + # [14:8] Rx Strobe Delay DLL 1(HS400 Mode), each 125ps. + # [6:0] Rx Strobe Delay DLL 2(HS400 Mode), each 125ps. + register "emmc_rx_strobe_cntl" = "0x0a0a" + + # Intel Common SoC Config + #+-------------------+---------------------------+ + #| Field | Value | + #+-------------------+---------------------------+ + #| GSPI0 | cr50 TPM. Early init is | + #| | required to set up a BAR | + #| | for TPM communication | + #| | before memory is up | + #| I2C0 | Digitizer | + #| I2C5 | Audio | + #| I2C6 | Trackpad | + #| I2C7 | Touchscreen | + #+-------------------+---------------------------+ + + register "tcc_offset" = "10" + + register "common_soc_config" = "{ + .gspi[0] = { + .speed_mhz = 1, + .early_init = 1, + }, + .i2c[0] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 88, + .fall_time_ns = 16, + }, + .i2c[5] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 104, + .fall_time_ns = 52, + }, + .i2c[6] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 66, + .fall_time_ns = 90, + .data_hold_time_ns = 350, + }, + .i2c[7] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 44, + .fall_time_ns = 90, + }, + }" + + device domain 0 on + device pci 16.0 on + chip drivers/i2c/hid + register "generic.hid" = ""WCOM50C1"" + register "generic.desc" = ""WCOM Digitizer"" + register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPIO_139_IRQ)" + register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_140)" + register "generic.reset_delay_ms" = "20" + register "generic.has_power_resource" = "1" + register "hid_desc_reg_offset" = "0x1" + device i2c 0x9 on end + end + chip drivers/generic/gpio_keys + register "name" = ""PENH"" + register "gpio" = "ACPI_GPIO_INPUT_ACTIVE_LOW(GPIO_145)" + register "key.dev_name" = ""EJCT"" + register "key.linux_code" = "SW_PEN_INSERTED" + register "key.linux_input_type" = "EV_SW" + register "key.label" = ""pen_eject"" + register "key.wake" = "GPE0_DW2_04" + register "key.wakeup_event_action" = "EV_ACT_DEASSERTED" + device generic 0 on end + end + end # - I2C 0 + device pci 17.1 on + chip drivers/i2c/da7219 + register "irq" = "ACPI_IRQ_LEVEL_LOW(GPIO_137_IRQ)" + register "btn_cfg" = "50" + register "mic_det_thr" = "500" + register "jack_ins_deb" = "20" + register "jack_det_rate" = ""32ms_64ms"" + register "jack_rem_deb" = "1" + register "a_d_btn_thr" = "0xa" + register "d_b_btn_thr" = "0x16" + register "b_c_btn_thr" = "0x21" + register "c_mic_btn_thr" = "0x3e" + register "btn_avg" = "4" + register "adc_1bit_rpt" = "1" + register "micbias_lvl" = "2600" + register "mic_amp_in_sel" = ""diff"" + device i2c 1a on end + end + end # - I2C 5 + device pci 17.2 on + chip drivers/i2c/generic + register "hid" = ""ELAN0000"" + register "desc" = ""ELAN Touchpad"" + register "irq" = "ACPI_IRQ_WAKE_EDGE_LOW(GPIO_135_IRQ)" + register "wake" = "GPE0_DW3_27" + register "probed" = "1" + device i2c 15 on end + end + chip drivers/i2c/hid + register "generic.hid" = ""PNP0C50"" + register "generic.desc" = ""Synaptics Touchpad"" + register "generic.irq" = "ACPI_IRQ_WAKE_EDGE_LOW(GPIO_135_IRQ)" + register "generic.wake" = "GPE0_DW3_27" + register "generic.probed" = "1" + register "hid_desc_reg_offset" = "0x20" + device i2c 0x2c on end + end + end # - I2C 6 + device pci 17.3 on + chip drivers/i2c/generic + register "hid" = ""ELAN0001"" + register "desc" = ""ELAN Touchscreen"" + register "irq" = "ACPI_IRQ_EDGE_LOW(GPIO_212_IRQ)" + register "probed" = "1" + register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_105)" + register "reset_delay_ms" = "20" + register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_146)" + register "enable_delay_ms" = "1" + register "has_power_resource" = "1" + device i2c 10 on end + end + chip drivers/i2c/generic + register "hid" = ""RAYD0001"" + register "desc" = ""Raydium Touchscreen"" + register "irq" = "ACPI_IRQ_EDGE_LOW(GPIO_212_IRQ)" + register "probed" = "1" + register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_105)" + register "reset_delay_ms" = "1" + register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_146)" + register "enable_delay_ms" = "50" + register "has_power_resource" = "1" + device i2c 39 on end + end + end # - I2C 7 + end + + # Disable compliance mode + register "DisableComplianceMode" = "1" +end |