diff options
author | Matt DeVillier <matt.devillier@gmail.com> | 2018-07-07 19:03:06 -0500 |
---|---|---|
committer | Martin Roth <martinroth@google.com> | 2018-07-21 00:49:52 +0000 |
commit | 357ea55f454a77dd5c2a9b14e5d7d5946b433146 (patch) | |
tree | d4440490f46869dddaeb620ecf975eef89869e54 /src/mainboard/google/lars/devicetree.cb | |
parent | 39f3c7e1840823c294d7cedf11aed62bdd765141 (diff) |
google/lars: Convert to a variant of glados
Convert lars to a variant of glados Skylake reference board:
- add lars-specific DPTF, EC config, GPIO config, Kconfig,
NHLT config, PEI data, VBT, SPD data, and devicetree
- add conditional generation of NHLT ACPI data for Maxim codec,
including override of OEM ID and OEM table ID
- remove existing lars board/directory
Test: build/boot google/lars, verify functionality unchanged
from pre-variant configuration
Change-Id: Iab37f1b92b0f3a5d99796f916a6fdcc14ce4eef4
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/27413
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Youness Alaoui <snifikino@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Diffstat (limited to 'src/mainboard/google/lars/devicetree.cb')
-rw-r--r-- | src/mainboard/google/lars/devicetree.cb | 296 |
1 files changed, 0 insertions, 296 deletions
diff --git a/src/mainboard/google/lars/devicetree.cb b/src/mainboard/google/lars/devicetree.cb deleted file mode 100644 index 6bb460ae3c..0000000000 --- a/src/mainboard/google/lars/devicetree.cb +++ /dev/null @@ -1,296 +0,0 @@ -chip soc/intel/skylake - - # Enable deep Sx states - register "deep_s5_enable_ac" = "1" - register "deep_s5_enable_dc" = "1" - register "deep_sx_config" = "DSX_EN_LAN_WAKE_PIN" - - # GPE configuration - # Note that GPE events called out in ASL code rely on this - # route. i.e. If this route changes then the affected GPE - # offset bits also need to be changed. - register "gpe0_dw0" = "GPP_B" - register "gpe0_dw1" = "GPP_D" - register "gpe0_dw2" = "GPP_E" - - # EC host command ranges are in 0x800-0x8ff & 0x200-0x20f - register "gen1_dec" = "0x00fc0801" - register "gen2_dec" = "0x000c0201" - - # Enable "Intel Speed Shift Technology" - register "speed_shift_enable" = "1" - - # Enable DPTF - register "dptf_enable" = "1" - - # FSP Configuration - register "EnableAzalia" = "1" - register "DspEnable" = "1" - register "IoBufferOwnership" = "3" - register "SmbusEnable" = "1" - register "ScsEmmcEnabled" = "1" - register "ScsEmmcHs400Enabled" = "1" - register "ScsSdCardEnabled" = "0" - register "InternalGfx" = "1" - register "SkipExtGfxScan" = "1" - register "Device4Enable" = "1" - register "HeciEnabled" = "0" - register "SaGv" = "3" - register "PmTimerDisabled" = "1" - - register "pirqa_routing" = "PCH_IRQ11" - register "pirqb_routing" = "PCH_IRQ10" - register "pirqc_routing" = "PCH_IRQ11" - register "pirqd_routing" = "PCH_IRQ11" - register "pirqe_routing" = "PCH_IRQ11" - register "pirqf_routing" = "PCH_IRQ11" - register "pirqg_routing" = "PCH_IRQ11" - register "pirqh_routing" = "PCH_IRQ11" - - # Enabling SLP_S3#, SLP_S4#, SLP_SUS and SLP_A Stretch - # SLP_S3 Minimum Assertion Width. Values 0: 60us, 1: 1ms, 2: 50ms, 3: 2s - register "PmConfigSlpS3MinAssert" = "0x02" - - # SLP_S4 Minimum Assertion Width. Values 0: default, 1: 1s, 2: 2s, 3: 3s, 4: 4s - register "PmConfigSlpS4MinAssert" = "0x04" - - # SLP_SUS Minimum Assertion Width. Values 0: 0ms, 1: 500ms, 2: 1s, 3: 4s - register "PmConfigSlpSusMinAssert" = "0x03" - - # SLP_A Minimum Assertion Width. Values 0: 0ms, 1: 4s, 2: 98ms, 3: 2s - register "PmConfigSlpAMinAssert" = "0x03" - - # Determines if enable Serial IRQ. Values 0: Disabled, 1: Enabled - register "SerialIrqConfigSirqEnable" = "0x01" - - # VR Settings Configuration for 5 Domains - #+----------------+-------+-------+-------------+-------------+-------+ - #| Domain/Setting | SA | IA | Ring Sliced | GT Unsliced | GT | - #+----------------+-------+-------+-------------+-------------+-------+ - #| Psi1Threshold | 20A | 20A | 20A | 20A | 20A | - #| Psi2Threshold | 4A | 5A | 5A | 5A | 5A | - #| Psi3Threshold | 1A | 1A | 1A | 1A | 1A | - #| Psi3Enable | 1 | 1 | 1 | 1 | 1 | - #| Psi4Enable | 1 | 1 | 1 | 1 | 1 | - #| ImonSlope | 0 | 0 | 0 | 0 | 0 | - #| ImonOffset | 0 | 0 | 0 | 0 | 0 | - #| IccMax | 7A | 34A | 34A | 35A | 35A | - #| VrVoltageLimit | 1.52V | 1.52V | 1.52V | 1.52V | 1.52V | - #+----------------+-------+-------+-------------+-------------+-------+ - register "domain_vr_config[VR_SYSTEM_AGENT]" = "{ - .vr_config_enable = 1, \ - .psi1threshold = 0x50, \ - .psi2threshold = 0x10, \ - .psi3threshold = 0x4, \ - .psi3enable = 1, \ - .psi4enable = 1, \ - .imon_slope = 0x0, \ - .imon_offset = 0x0, \ - .icc_max = 0x1C, \ - .voltage_limit = 0x5F0 \ - }" - - register "domain_vr_config[VR_IA_CORE]" = "{ - .vr_config_enable = 1, \ - .psi1threshold = 0x50, \ - .psi2threshold = 0x14, \ - .psi3threshold = 0x4, \ - .psi3enable = 1, \ - .psi4enable = 1, \ - .imon_slope = 0x0, \ - .imon_offset = 0x0, \ - .icc_max = 0x88, \ - .voltage_limit = 0x5F0 \ - }" - register "domain_vr_config[VR_RING]" = "{ - .vr_config_enable = 1, \ - .psi1threshold = 0x50, \ - .psi2threshold = 0x14, \ - .psi3threshold = 0x4, \ - .psi3enable = 1, \ - .psi4enable = 1, \ - .imon_slope = 0x0, \ - .imon_offset = 0x0, \ - .icc_max = 0x88, \ - .voltage_limit = 0x5F0, \ - }" - - register "domain_vr_config[VR_GT_UNSLICED]" = "{ - .vr_config_enable = 1, \ - .psi1threshold = 0x50, \ - .psi2threshold = 0x14, \ - .psi3threshold = 0x4, \ - .psi3enable = 1, \ - .psi4enable = 1, \ - .imon_slope = 0x0, \ - .imon_offset = 0x0, \ - .icc_max = 0x8C ,\ - .voltage_limit = 0x5F0 \ - }" - - register "domain_vr_config[VR_GT_SLICED]" = "{ - .vr_config_enable = 1, \ - .psi1threshold = 0x50, \ - .psi2threshold = 0x14, \ - .psi3threshold = 0x4, \ - .psi3enable = 1, \ - .psi4enable = 1, \ - .imon_slope = 0x0, \ - .imon_offset = 0x0, \ - .icc_max = 0x8C, \ - .voltage_limit = 0x5F0 \ - }" - - # Enable Root port 1. - register "PcieRpEnable[0]" = "1" - # Enable CLKREQ# - register "PcieRpClkReqSupport[0]" = "1" - # RP 1 uses SRCCLKREQ1# - register "PcieRpClkReqNumber[0]" = "1" - - register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC0)" # Type-C Port 1 - register "usb2_ports[1]" = "USB2_PORT_FLEX(OC_SKIP)" # Camera - register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth - register "usb2_ports[4]" = "USB2_PORT_MID(OC2)" # Type-A Port (card) - register "usb2_ports[5]" = "USB2_PORT_MID(OC_SKIP)" # SD - register "usb2_ports[8]" = "USB2_PORT_LONG(OC3)" # Type-A Port (board) - - register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)" # Type-C Port 1 - register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)" # SD - register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC2)" # Type-A Port (card) - register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC3)" # Type-A Port (board) - - register "i2c_voltage[4]" = "I2C_VOLTAGE_1V8" # I2C4 is 1.8V - - # Must leave UART0 enabled or SD/eMMC will not work as PCI - register "SerialIoDevMode" = "{ \ - [PchSerialIoIndexI2C0] = PchSerialIoPci, \ - [PchSerialIoIndexI2C1] = PchSerialIoPci, \ - [PchSerialIoIndexI2C2] = PchSerialIoDisabled, \ - [PchSerialIoIndexI2C3] = PchSerialIoDisabled, \ - [PchSerialIoIndexI2C4] = PchSerialIoPci, \ - [PchSerialIoIndexI2C5] = PchSerialIoDisabled, \ - [PchSerialIoIndexSpi0] = PchSerialIoDisabled, \ - [PchSerialIoIndexSpi1] = PchSerialIoDisabled, \ - [PchSerialIoIndexUart0] = PchSerialIoPci, \ - [PchSerialIoIndexUart1] = PchSerialIoDisabled, \ - [PchSerialIoIndexUart2] = PchSerialIoSkipInit, \ - }" - - # PL2 override 25W - register "tdp_pl2_override" = "25" - - # Send an extra VR mailbox command for the PS4 exit issue - register "SendVrMbxCmd" = "2" - - # Lock Down - register "common_soc_config" = "{ - .chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT, - }" - - device cpu_cluster 0 on - device lapic 0 on end - end - device domain 0 on - device pci 00.0 on end # Host Bridge - device pci 02.0 on end # Integrated Graphics Device - device pci 14.0 on end # USB xHCI - device pci 14.1 off end # USB xDCI (OTG) - device pci 14.2 on end # Thermal Subsystem - device pci 15.0 on - chip drivers/i2c/generic - register "hid" = ""ELAN0001"" - register "desc" = ""ELAN Touchscreen"" - register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)" - device i2c 10 on end - end - end # I2C #0 - device pci 15.1 on - chip drivers/i2c/generic - register "hid" = ""ELAN0000"" - register "desc" = ""ELAN Touchpad"" - register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_B3_IRQ)" - register "wake" = "GPE0_DW0_05" - device i2c 15 on end - end - end # I2C #1 - device pci 15.2 off end # I2C #2 - device pci 15.3 off end # I2C #3 - device pci 16.0 on end # Management Engine Interface 1 - device pci 16.1 off end # Management Engine Interface 2 - device pci 16.2 off end # Management Engine IDE-R - device pci 16.3 off end # Management Engine KT Redirection - device pci 16.4 off end # Management Engine Interface 3 - device pci 17.0 off end # SATA - device pci 19.0 on end # UART #2 - device pci 19.1 off end # I2C #5 - device pci 19.2 on - chip drivers/i2c/nau8825 - register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F10_IRQ)" - register "jkdet_enable" = "1" - register "jkdet_pull_enable" = "1" - register "jkdet_pull_up" = "1" - register "jkdet_polarity" = "1" # ActiveLow - register "vref_impedance" = "2" # 125kOhm - register "micbias_voltage" = "6" # 2.754 - register "sar_threshold_num" = "4" - register "sar_threshold[0]" = "0x08" - register "sar_threshold[1]" = "0x12" - register "sar_threshold[2]" = "0x26" - register "sar_threshold[3]" = "0x73" - register "sar_hysteresis" = "0" - register "sar_voltage" = "6" - register "sar_compare_time" = "1" # 1us - register "sar_sampling_time" = "1" # 4us - register "short_key_debounce" = "3" # 30ms - register "jack_insert_debounce" = "7" # 512ms - register "jack_eject_debounce" = "0" - device i2c 1a on end - end - end # I2C #4 - device pci 1c.0 on - chip drivers/intel/wifi - register "wake" = "GPE0_DW0_16" - device pci 00.0 on end - end - end # PCI Express Port 1 - device pci 1c.1 off end # PCI Express Port 2 - device pci 1c.2 off end # PCI Express Port 3 - device pci 1c.3 off end # PCI Express Port 4 - device pci 1c.4 off end # PCI Express Port 5 - device pci 1c.5 off end # PCI Express Port 6 - device pci 1c.6 off end # PCI Express Port 7 - device pci 1c.7 off end # PCI Express Port 8 - device pci 1d.0 off end # PCI Express Port 9 - device pci 1d.1 off end # PCI Express Port 10 - device pci 1d.2 off end # PCI Express Port 11 - device pci 1d.3 off end # PCI Express Port 12 - device pci 1e.0 on end # UART #0 - device pci 1e.1 off end # UART #1 - device pci 1e.2 off end # GSPI #0 - device pci 1e.3 off end # GSPI #1 - device pci 1e.4 on end # eMMC - device pci 1e.5 off end # SDIO - device pci 1e.6 off end # SDCard - device pci 1f.0 on - chip drivers/pc80/tpm - device pnp 0c31.0 on end - end - chip ec/google/chromeec - device pnp 0c09.0 on end - end - end # LPC Interface - device pci 1f.1 on end # P2SB - device pci 1f.2 on end # Power Management Controller - device pci 1f.3 on - chip drivers/generic/max98357a - register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_B2)" - register "sdmode_delay" = "5" - device generic 0 on end - end - end # Intel HDA - device pci 1f.4 on end # SMBus - device pci 1f.5 on end # PCH SPI - device pci 1f.6 off end # GbE - end -end |