diff options
author | Richard Spiegel <richard.spiegel@silverbackltd.com> | 2017-12-26 08:00:53 -0700 |
---|---|---|
committer | Martin Roth <martinroth@google.com> | 2018-01-23 05:45:28 +0000 |
commit | 254f10e9e60bcfd37b0772c540e99111806cdb3f (patch) | |
tree | f76797ba9a6cb176d5d9b05c959e5497f041669b /src/mainboard/google/kahlee/variants | |
parent | 843f3abcbdafceff4e698bcf8504172f253f39b7 (diff) |
google/kahlee/variants/(kahlee/baseboard)/gpio.c: Convert GPIO table
Fill up the dummy gpio_set_stage_reset[] and gpio_set_stage_ram[]
with data from agesa_board_gpios[], wrap format and delete
agesa_board_gpios[] and get_gpio_table(). Then remove the
get_gpio_table() call from BiosCallOuts.c. Finally, remove
get_gpio_table() from
google/kahlee/variants/baseboard/include/baseboard/variants.h.
BUG=b:64140392
TEST=Build grunt. Build and boot kahlee, recording serial output. Search
for "stage bootblock" and "stage ramstage", indicating GPIO being
programmed.
Change-Id: I88bf2c855105a6bc458aedfc6da7725662695667
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/22988
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Diffstat (limited to 'src/mainboard/google/kahlee/variants')
3 files changed, 154 insertions, 200 deletions
diff --git a/src/mainboard/google/kahlee/variants/baseboard/gpio.c b/src/mainboard/google/kahlee/variants/baseboard/gpio.c index 0566320e80..f51f5458da 100644 --- a/src/mainboard/google/kahlee/variants/baseboard/gpio.c +++ b/src/mainboard/google/kahlee/variants/baseboard/gpio.c @@ -29,149 +29,87 @@ * ramstage. */ const static struct soc_amd_stoneyridge_gpio gpio_set_stage_reset[] = { - /* GPIO_0 - EC_PCH_PWR_BTN_ODL */ { GPIO_0, Function0, FCH_GPIO_PULL_UP_ENABLE | INPUT }, -}; - -const static struct soc_amd_stoneyridge_gpio gpio_set_stage_ram[] = { - - /* GPIO_2 - WLAN_PCIE_WAKE_3V3_ODL */ - { GPIO_2, Function0, FCH_GPIO_PULL_UP_ENABLE | INPUT }, -}; - -/* - * These settings were generated by a spreadsheet. If they need to be updated, - * update the spreadsheet shared with the Grunt development team. - */ -static const GPIO_CONTROL agesa_board_gpios[] = { - - /* GPIO_0 - EC_PCH_PWR_BTN_ODL */ - { GPIO_0, Function0, FCH_GPIO_PULL_UP_ENABLE }, /* GPIO_1 - SYS_RST_ODL */ - { GPIO_1, Function0, FCH_GPIO_PULL_UP_ENABLE }, - - /* GPIO_2 - WLAN_PCIE_WAKE_3V3_ODL */ - { GPIO_2, Function0, FCH_GPIO_PULL_UP_ENABLE }, + { GPIO_1, Function0, FCH_GPIO_PULL_UP_ENABLE | INPUT }, /* GPIO_3 - MEM_VOLT_SEL */ - { GPIO_3, Function0, FCH_GPIO_PULL_UP_ENABLE }, - - /* GPIO_4 - EN_PP3300_WLAN */ - { GPIO_4, Function0, FCH_GPIO_OUTPUT_VALUE | FCH_GPIO_OUTPUT_ENABLE }, + { GPIO_3, Function0, FCH_GPIO_PULL_UP_ENABLE | INPUT }, /* GPIO_5 - PCH_TRACKPAD_INT_3V3_ODL, SCI */ - { GPIO_5, Function0, FCH_GPIO_PULL_UP_ENABLE }, + { GPIO_5, Function0, FCH_GPIO_PULL_UP_ENABLE | INPUT }, /* GPIO_6 - APU_RST_L / EC_SMI_ODL, SMI */ - { GPIO_6, Function0, FCH_GPIO_PULL_UP_ENABLE }, + { GPIO_6, Function0, FCH_GPIO_PULL_UP_ENABLE | INPUT }, /* GPIO_7 - APU_PWROK_OD (currently not used) */ - { GPIO_7, Function0, FCH_GPIO_PULL_UP_ENABLE }, + { GPIO_7, Function0, FCH_GPIO_PULL_UP_ENABLE | INPUT }, /* GPIO_8 - DDR_ALERT_3V3_L (currently not used) */ - { GPIO_8, Function0, FCH_GPIO_PULL_UP_ENABLE }, + { GPIO_8, Function0, FCH_GPIO_PULL_UP_ENABLE | INPUT }, /* GPIO_9 - H1_PCH_INT_ODL, SCI */ - { GPIO_9, Function0, FCH_GPIO_PULL_UP_ENABLE }, - - /* GPIO_10 - SLP_S0_L (currently not used) */ - { GPIO_10, Function0, FCH_GPIO_PULL_UP_ENABLE }, + { GPIO_9, Function0, FCH_GPIO_PULL_UP_ENABLE | INPUT }, /* GPIO_11 - TOUCHSCREEN_INT_3V3_ODL, SCI */ - { GPIO_11, Function0, FCH_GPIO_PULL_UP_ENABLE }, - - /* GPIO_12 - Unused (TP126) */ - { GPIO_12, Function2, FCH_GPIO_PULL_UP_ENABLE }, - - /* GPIO_13 - APU_PEN_PDCT_ODL (currently not used) */ - { GPIO_13, Function1, FCH_GPIO_PULL_UP_ENABLE }, + { GPIO_11, Function0, FCH_GPIO_PULL_UP_ENABLE | INPUT }, /* GPIO_14 - APU_HP_INT_ODL, SCI */ - { GPIO_14, Function1, FCH_GPIO_PULL_UP_ENABLE }, + { GPIO_14, Function1, FCH_GPIO_PULL_UP_ENABLE | INPUT }, /* GPIO_15 - EC_IN_RW_OD */ - { GPIO_15, Function1, FCH_GPIO_PULL_UP_ENABLE }, - - /* GPIO_16 - USB_C0_OC_L */ - { GPIO_16, Function0, FCH_GPIO_PULL_UP_ENABLE }, - - /* GPIO_17 - USB_C1_OC_L */ - { GPIO_17, Function0, FCH_GPIO_PULL_UP_ENABLE }, - - /* GPIO_18 - USB_A0_OC_ODL */ - { GPIO_18, Function0, FCH_GPIO_PULL_UP_ENABLE }, + { GPIO_15, Function1, FCH_GPIO_PULL_UP_ENABLE | INPUT }, /* GPIO_19 - APU_I2C_SCL3 (Touchscreen) */ - { GPIO_19, Function1, FCH_GPIO_PULL_UP_ENABLE }, + { GPIO_19, Function1, FCH_GPIO_PULL_UP_ENABLE | INPUT }, /* GPIO_20 - APU_I2C_SDA3 (Touchscreen) */ - { GPIO_20, Function1, FCH_GPIO_PULL_UP_ENABLE }, + { GPIO_20, Function1, FCH_GPIO_PULL_UP_ENABLE | INPUT }, /* GPIO_21 - APU_PEN_INT_ODL, SCI */ - { GPIO_21, Function1, FCH_GPIO_PULL_UP_ENABLE }, + { GPIO_21, Function1, FCH_GPIO_PULL_UP_ENABLE | INPUT }, /* GPIO_22 - EC_SCI_ODL, SCI */ - { GPIO_22, Function1, FCH_GPIO_PULL_UP_ENABLE }, + { GPIO_22, Function1, FCH_GPIO_PULL_UP_ENABLE | INPUT }, /* GPIO_23 - ACOK_OD */ /* GPIO_24 - USB_A1_OC_ODL */ - { GPIO_24, Function0, FCH_GPIO_PULL_UP_ENABLE }, + { GPIO_24, Function0, FCH_GPIO_PULL_UP_ENABLE | INPUT }, /* GPIO_25 - SD_CD */ - { GPIO_25, Function0, FCH_GPIO_PULL_UP_ENABLE }, + { GPIO_25, Function0, FCH_GPIO_PULL_UP_ENABLE | INPUT }, /* GPIO_26 - APU_PCIE_RST_L */ - { GPIO_26, Function0, }, + { GPIO_26, Function0, INPUT }, /* GPIO_40 - EMMC_BRIDGE_RST_L */ - { GPIO_40, Function0, FCH_GPIO_OUTPUT_VALUE | FCH_GPIO_OUTPUT_ENABLE }, + { GPIO_40, Function0, OUTPUT_H }, /* GPIO_42 - S5_MUX_CTRL */ - { GPIO_42, Function0, FCH_GPIO_OUTPUT_VALUE | FCH_GPIO_OUTPUT_ENABLE }, - - /* GPIO_67 - PEN_RESET */ - { GPIO_67, Function0, FCH_GPIO_OUTPUT_ENABLE }, - - /* GPIO_70 - WLAN_PE_RST_L */ - { GPIO_70, Function0, FCH_GPIO_OUTPUT_VALUE | FCH_GPIO_OUTPUT_ENABLE }, + { GPIO_42, Function0, OUTPUT_H }, /* GPIO_74 - LPC_CLK0_EC_R */ - { GPIO_74, Function0, FCH_GPIO_PULL_DOWN_ENABLE }, - - /* GPIO_75 - Unused (strap) (R139/R130) */ - { GPIO_75, Function1, FCH_GPIO_PULL_UP_ENABLE }, - - /* GPIO_76 - EN_PP3300_TOUCHSCREEN */ - { GPIO_76, Function0, FCH_GPIO_OUTPUT_VALUE | FCH_GPIO_OUTPUT_ENABLE }, + { GPIO_74, Function0, FCH_GPIO_PULL_DOWN_ENABLE | INPUT }, /* GPIO_84 - HUB_RST (Active High) */ - { GPIO_84, Function1, FCH_GPIO_OUTPUT_ENABLE }, + { GPIO_84, Function1, OUTPUT_L }, /* GPIO_85 - TOUCHSCREEN_RST (Active High) */ - { GPIO_85, Function1, FCH_GPIO_OUTPUT_ENABLE }, - - /* GPIO_86 - Unused (TP109) */ - { GPIO_86, Function1, FCH_GPIO_PULL_UP_ENABLE }, + { GPIO_85, Function1, OUTPUT_L }, /* GPIO_87 - LPC_SERIRQ */ - { GPIO_87, Function0, }, + { GPIO_87, Function0, INPUT }, /* GPIO_88 - LPC_CLKRUN_L */ - { GPIO_88, Function0, }, - - /* GPIO_90 - EN_PP3300_CAMERA */ - { GPIO_90, Function0, FCH_GPIO_OUTPUT_VALUE | FCH_GPIO_OUTPUT_ENABLE }, - - /* GPIO_91 - EN_PP3300_TRACKPAD */ - { GPIO_91, Function1, FCH_GPIO_OUTPUT_VALUE | FCH_GPIO_OUTPUT_ENABLE }, + { GPIO_88, Function0, INPUT }, /* GPIO_92 - WLAN_PCIE_CLKREQ_3V3_ODL */ - { GPIO_92, Function0, FCH_GPIO_PULL_UP_ENABLE }, + { GPIO_92, Function0, FCH_GPIO_PULL_UP_ENABLE | INPUT }, /* GPIO_93 - EMMC_RST_L */ - { GPIO_93, Function1, FCH_GPIO_OUTPUT_VALUE | FCH_GPIO_OUTPUT_ENABLE }, + { GPIO_93, Function1, OUTPUT_H }, /* GPIO_95 - SD_CLK */ /* GPIO_96 - SD_CMD */ @@ -181,104 +119,144 @@ static const GPIO_CONTROL agesa_board_gpios[] = { /* GPIO_100 - SD_D3 */ /* GPIO_101 - SD_WP_L */ - { GPIO_101, Function0, FCH_GPIO_PULL_DOWN_ENABLE }, - - /* GPIO_102 - EN_SD_SOCKET_PWR */ - { GPIO_102, Function0, FCH_GPIO_PULL_DOWN_ENABLE }, - - /* GPIO_113 - APU_I2C_SCL2 (Pen & Trackpad) */ - { GPIO_113, Function1, FCH_GPIO_PULL_UP_ENABLE }, - - /* GPIO_114 - APU_I2C_SDA2 (Pen & Trackpad) */ - { GPIO_114, Function1, FCH_GPIO_PULL_UP_ENABLE }, - - /* GPIO_115 - Unused (TP127) */ - { GPIO_115, Function1, FCH_GPIO_PULL_UP_ENABLE }, + { GPIO_101, Function0, FCH_GPIO_PULL_DOWN_ENABLE | INPUT }, /* GPIO_116 - PCIE_EMMC_CLKREQ_L */ - { GPIO_116, Function0, }, + { GPIO_116, Function0, INPUT }, /* GPIO_117 - PCH_SPI_CLK_R */ /* GPIO_118 - PCH_SPI_CS0_L */ - { GPIO_118, Function0, }, + { GPIO_118, Function0, INPUT }, /* GPIO_119 - SPK_PA_EN */ - { GPIO_119, Function2, FCH_GPIO_OUTPUT_VALUE | FCH_GPIO_OUTPUT_ENABLE }, + { GPIO_119, Function2, OUTPUT_H }, /* GPIO_120 - PCH_SPI_MISO */ /* GPIO_121 - PCH_SPI_MOSI */ /* GPIO_122 - APU_BIOS_FLASH_WP_L */ - { GPIO_122, Function1, }, + { GPIO_122, Function1, INPUT }, /* GPIO_126 - DMIC_CLK2_EN */ - { GPIO_126, Function1, FCH_GPIO_OUTPUT_VALUE | FCH_GPIO_OUTPUT_ENABLE }, + { GPIO_126, Function1, OUTPUT_H }, /* GPIO_129 - APU_KBRST_L */ - { GPIO_129, Function0, FCH_GPIO_PULL_UP_ENABLE }, - - /* GPIO_130 - Unused (TP55) */ - { GPIO_130, Function1, FCH_GPIO_PULL_UP_ENABLE }, + { GPIO_129, Function0, FCH_GPIO_PULL_UP_ENABLE | INPUT }, /* GPIO_131 - CONFIG_STRAP3 */ - { GPIO_131, Function3, }, + { GPIO_131, Function3, INPUT }, /* GPIO_132 - CONFIG_STRAP4 */ - { GPIO_132, Function2, }, + { GPIO_132, Function2, INPUT }, /* GPIO_133 - APU_EDP_BKLTEN_L (backlight - Active LOW) */ - { GPIO_133, Function1, FCH_GPIO_OUTPUT_ENABLE }, - - /* GPIO_135 - Unused (TP128) */ - { GPIO_135, Function1, FCH_GPIO_PULL_UP_ENABLE }, + { GPIO_133, Function1, OUTPUT_L }, /* GPIO_136 - UART_PCH_RX_DEBUG_TX */ - { GPIO_136, Function0, }, + { GPIO_136, Function0, INPUT }, /* GPIO_137 - AUDIO_CLK_EN (Remove in EVT?) */ - { GPIO_137, Function1, FCH_GPIO_OUTPUT_VALUE | FCH_GPIO_OUTPUT_ENABLE }, + { GPIO_137, Function1, OUTPUT_H }, /* GPIO_138 - UART_PCH_TX_DEBUG_RX */ - { GPIO_138, Function0, }, + { GPIO_138, Function0, INPUT }, /* GPIO_139 - CONFIG_STRAP1 */ - { GPIO_139, Function1, }, + { GPIO_139, Function1, INPUT }, /* GPIO_140 - I2S_BCLK_R (init to func0, used for I2S) */ - { GPIO_140, Function0, }, + { GPIO_140, Function0, INPUT }, /* GPIO_141 - I2S2_DATA_MIC2 (init to func0, used for I2S) */ - { GPIO_141, Function0, }, + { GPIO_141, Function0, INPUT }, /* GPIO_142 - CONFIG_STRAP2 */ - { GPIO_142, Function1, }, + { GPIO_142, Function1, INPUT }, /* GPIO_143 - I2S2_DATA (init to func0, used for I2S) */ - { GPIO_143, Function0, }, + { GPIO_143, Function0, INPUT }, /* GPIO_144 - I2S_LR_R (init to func0, used for I2S) */ - { GPIO_144, Function0, }, + { GPIO_144, Function0, INPUT }, /* GPIO_145 - PCH_I2C_AUDIO_SCL */ - { GPIO_145, Function0, }, + { GPIO_145, Function0, INPUT }, /* GPIO_146 - PCH_I2C_AUDIO_SDA */ - { GPIO_146, Function0, }, + { GPIO_146, Function0, INPUT }, /* GPIO_147 - PCH_I2C_HUB_SCL */ - { GPIO_147, Function0, }, + { GPIO_147, Function0, INPUT }, /* GPIO_148 - PCH_I2C_HUB_SDA */ - { GPIO_148, Function0, }, - - {-1} + { GPIO_148, Function0, INPUT }, }; -const __attribute__((weak)) GPIO_CONTROL *get_gpio_table(void) -{ - return agesa_board_gpios; -} +const static struct soc_amd_stoneyridge_gpio gpio_set_stage_ram[] = { + /* GPIO_2 - WLAN_PCIE_WAKE_3V3_ODL */ + { GPIO_2, Function0, FCH_GPIO_PULL_UP_ENABLE | INPUT }, + + /* GPIO_4 - EN_PP3300_WLAN */ + { GPIO_4, Function0, OUTPUT_H }, + + /* GPIO_10 - SLP_S0_L (currently not used) */ + { GPIO_10, Function0, FCH_GPIO_PULL_UP_ENABLE | INPUT }, + + /* GPIO_12 - Unused (TP126) */ + { GPIO_12, Function2, FCH_GPIO_PULL_UP_ENABLE | INPUT }, + + /* GPIO_13 - APU_PEN_PDCT_ODL (currently not used) */ + { GPIO_13, Function1, FCH_GPIO_PULL_UP_ENABLE | INPUT }, + + /* GPIO_16 - USB_C0_OC_L */ + { GPIO_16, Function0, FCH_GPIO_PULL_UP_ENABLE | INPUT }, + + /* GPIO_17 - USB_C1_OC_L */ + { GPIO_17, Function0, FCH_GPIO_PULL_UP_ENABLE | INPUT }, + + /* GPIO_18 - USB_A0_OC_ODL */ + { GPIO_18, Function0, FCH_GPIO_PULL_UP_ENABLE | INPUT }, + + /* GPIO_67 - PEN_RESET */ + { GPIO_67, Function0, OUTPUT_L }, + + /* GPIO_70 - WLAN_PE_RST_L */ + { GPIO_70, Function0, OUTPUT_H }, + + /* GPIO_75 - Unused (strap) (R139/R130) */ + { GPIO_75, Function1, FCH_GPIO_PULL_UP_ENABLE | INPUT }, + + /* GPIO_76 - EN_PP3300_TOUCHSCREEN */ + { GPIO_76, Function0, OUTPUT_H }, + + /* GPIO_86 - Unused (TP109) */ + { GPIO_86, Function1, FCH_GPIO_PULL_UP_ENABLE | INPUT }, + + /* GPIO_90 - EN_PP3300_CAMERA */ + { GPIO_90, Function0, OUTPUT_H }, + + /* GPIO_91 - EN_PP3300_TRACKPAD */ + { GPIO_91, Function1, OUTPUT_H }, + + /* GPIO_102 - EN_SD_SOCKET_PWR */ + { GPIO_102, Function0, FCH_GPIO_PULL_DOWN_ENABLE | INPUT }, + + /* GPIO_113 - APU_I2C_SCL2 (Pen & Trackpad) */ + { GPIO_113, Function1, FCH_GPIO_PULL_UP_ENABLE | INPUT }, + + /* GPIO_114 - APU_I2C_SDA2 (Pen & Trackpad) */ + { GPIO_114, Function1, FCH_GPIO_PULL_UP_ENABLE | INPUT }, + + /* GPIO_115 - Unused (TP127) */ + { GPIO_115, Function1, FCH_GPIO_PULL_UP_ENABLE | INPUT }, + + /* GPIO_130 - Unused (TP55) */ + { GPIO_130, Function1, FCH_GPIO_PULL_UP_ENABLE | INPUT }, + + /* GPIO_135 - Unused (TP128) */ + { GPIO_135, Function1, FCH_GPIO_PULL_UP_ENABLE | INPUT }, +}; const __attribute__((weak)) const struct soc_amd_stoneyridge_gpio *board_get_gpio(size_t *size) diff --git a/src/mainboard/google/kahlee/variants/baseboard/include/baseboard/variants.h b/src/mainboard/google/kahlee/variants/baseboard/include/baseboard/variants.h index 9c547946e9..bf14ef4d7c 100644 --- a/src/mainboard/google/kahlee/variants/baseboard/include/baseboard/variants.h +++ b/src/mainboard/google/kahlee/variants/baseboard/include/baseboard/variants.h @@ -21,7 +21,6 @@ #include <soc/smi.h> #include <amdblocks/agesawrapper.h> -const GPIO_CONTROL *get_gpio_table(void); const struct sci_source *get_gpe_table(size_t *num); uint8_t variant_memory_sku(void); int variant_mainboard_read_spd(uint8_t spdAddress, char *buf, size_t len); diff --git a/src/mainboard/google/kahlee/variants/kahlee/gpio.c b/src/mainboard/google/kahlee/variants/kahlee/gpio.c index dda44afe7e..e357c7e2c3 100644 --- a/src/mainboard/google/kahlee/variants/kahlee/gpio.c +++ b/src/mainboard/google/kahlee/variants/kahlee/gpio.c @@ -28,97 +28,74 @@ const struct soc_amd_stoneyridge_gpio gpio_set_stage_reset[] = { /* AGPIO2, to become event generator */ { GPIO_2, Function1, FCH_GPIO_PULL_UP_ENABLE | INPUT }, -}; - -const struct soc_amd_stoneyridge_gpio gpio_set_stage_ram[] = { - /* AGPIO 12 */ - { GPIO_12, Function2, FCH_GPIO_PULL_UP_ENABLE | INPUT }, -}; -static const GPIO_CONTROL agesa_board_gpios[] = { - /* AGPIO2 PCIE/WLAN WAKE# SCI*/ - {2, Function1, FCH_GPIO_PULL_UP_ENABLE }, + /* SER_TX */ + { GPIO_8, Function1, FCH_GPIO_PULL_UP_ENABLE | OUTPUT_H }, - /* SER TX */ - {8, Function1, FCH_GPIO_PULL_UP_ENABLE | FCH_GPIO_OUTPUT_VALUE - | FCH_GPIO_OUTPUT_ENABLE}, /* SER RX */ - {9, Function1, FCH_GPIO_PULL_UP_ENABLE }, - - /* AGPIO 12 */ - {12, Function2, FCH_GPIO_PULL_UP_ENABLE }, - - /* TS_EN_SOC (TouchScreen enable GPIO) */ - {13, Function1, FCH_GPIO_PULL_UP_ENABLE | FCH_GPIO_OUTPUT_VALUE - | FCH_GPIO_OUTPUT_ENABLE}, - - /* CAM_PWRON (Camera enable GPIO) */ - {14, Function1, FCH_GPIO_PULL_UP_ENABLE | FCH_GPIO_OUTPUT_VALUE - | FCH_GPIO_OUTPUT_ENABLE}, + { GPIO_9, Function1, FCH_GPIO_PULL_UP_ENABLE | INPUT }, /* EC_IN_RW */ - {15, Function1, FCH_GPIO_PULL_UP_ENABLE }, + {GPIO_15, Function1, FCH_GPIO_PULL_UP_ENABLE | INPUT }, /* APU_I2C_3_SCL */ - {19, Function1, FCH_GPIO_PULL_UP_ENABLE }, + {GPIO_19, Function1, FCH_GPIO_PULL_UP_ENABLE | INPUT }, /* APU_I2C_3_SDA */ - {20, Function1, FCH_GPIO_PULL_UP_ENABLE }, + {GPIO_20, Function1, FCH_GPIO_PULL_UP_ENABLE | INPUT }, /* AGPIO22 EC_SCI */ - {22, Function1, FCH_GPIO_PULL_UP_ENABLE }, + {GPIO_22, Function1, FCH_GPIO_PULL_UP_ENABLE | INPUT }, + + /* SPI_TPM_CS_L */ + {GPIO_76, Function1, FCH_GPIO_PULL_DOWN_ENABLE | OUTPUT_H }, + + /* BD_ID1 */ + {GPIO_135, Function1, INPUT }, + + /* TPM_SERIRQ# */ + {GPIO_139, Function1, FCH_GPIO_PULL_UP_ENABLE | INPUT }, + + /* BD_ID2 */ + {GPIO_140, Function1, INPUT }, + + /* APU_SPI_WP */ + {GPIO_142, Function1, FCH_GPIO_PULL_UP_ENABLE | INPUT }, + + /* BD_ID3 */ + {GPIO_144, Function1, INPUT } +}; + +const struct soc_amd_stoneyridge_gpio gpio_set_stage_ram[] = { + /* AGPIO 12 */ + { GPIO_12, Function2, FCH_GPIO_PULL_UP_ENABLE | INPUT }, + + /* TS_EN_SOC (TouchScreen enable GPIO) */ + {GPIO_13, Function1, FCH_GPIO_PULL_UP_ENABLE | OUTPUT_H}, + /* CAM_PWRON (Camera enable GPIO) */ + {GPIO_14, Function1, FCH_GPIO_PULL_UP_ENABLE | OUTPUT_H }, /* APU_BT_ON# */ - {24, Function1, FCH_GPIO_PULL_UP_ENABLE | FCH_GPIO_OUTPUT_VALUE - | FCH_GPIO_OUTPUT_ENABLE}, + {GPIO_24, Function1, FCH_GPIO_PULL_UP_ENABLE | OUTPUT_H }, /* DEVSLP1_SSD */ - {67, Function1, FCH_GPIO_PULL_UP_ENABLE}, + {67, Function1, FCH_GPIO_PULL_UP_ENABLE | INPUT }, /* DEVSLP1_EMMC */ /* No Connect for now. - * {70, Function1, FCH_GPIO_PULL_UP_ENABLE}, + * {GPIO_70, Function1, FCH_GPIO_PULL_UP_ENABLE | INPUT}, */ - /* SPI_TPM_CS_L */ - {76, Function1, FCH_GPIO_PULL_DOWN_ENABLE | FCH_GPIO_OUTPUT_VALUE - | FCH_GPIO_OUTPUT_ENABLE}, - /* CAM_LED# */ - {84, Function1, FCH_GPIO_PULL_UP_ENABLE | FCH_GPIO_OUTPUT_VALUE - | FCH_GPIO_OUTPUT_ENABLE}, + {GPIO_84, Function1, FCH_GPIO_PULL_UP_ENABLE | OUTPUT_H }, /* TS_RST# (TouchScreen Reset) */ - {85, Function1, FCH_GPIO_PULL_UP_ENABLE | FCH_GPIO_OUTPUT_VALUE - | FCH_GPIO_OUTPUT_ENABLE}, + {GPIO_85, Function1, FCH_GPIO_PULL_UP_ENABLE | OUTPUT_H }, /* WLAN_RST#_AUX */ - {119, Function2, FCH_GPIO_PULL_UP_ENABLE | FCH_GPIO_OUTPUT_VALUE - | FCH_GPIO_OUTPUT_ENABLE}, - - /* BD_ID1 */ - {135, Function1, 0 }, - - /* TPM_SERIRQ# */ - {139, Function1, FCH_GPIO_PULL_UP_ENABLE }, - - /* BD_ID2 */ - {140, Function1, 0 }, - - /* APU_SPI_WP */ - {142, Function1, FCH_GPIO_PULL_UP_ENABLE }, - - /* BD_ID3 */ - {144, Function1, 0 }, - - {-1} + {GPIO_119, Function2, FCH_GPIO_PULL_UP_ENABLE | OUTPUT_H }, }; -const GPIO_CONTROL *get_gpio_table(void) -{ - return agesa_board_gpios; -} - const struct soc_amd_stoneyridge_gpio *board_get_gpio(size_t *size) { if (GPIO_TABLE_BOOTBLOCK) { |