mb/google/hatch: Remove stryke mainboard

The stryke project/mainboard never ended up being built and was
cancelled early on, therefore remove it from the tree.

Change-Id: I4d91fbd4ba0abe0cf599e8e75f04398ef9ff5222
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59875
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by:  Felix Singer <felixsinger@posteo.net>

6 files changed, 0 insertions, 354 deletions

diff --git a/src/mainboard/google/hatch/variants/stryke/Makefile.inc b/src/mainboard/google/hatch/variants/stryke/Makefile.inc
deleted file mode 100644
index ba66a9a2b1..0000000000
--- a/src/mainboard/google/hatch/variants/stryke/Makefile.inc
+++ /dev/null
@@ -1,12 +0,0 @@
-## SPDX-License-Identifier: GPL-2.0-only
-
-SPD_SOURCES = 4G_2400         # 0b000
-SPD_SOURCES += empty_ddr4     # 0b001
-SPD_SOURCES += 8G_2400        # 0b010
-SPD_SOURCES += 8G_2666        # 0b011
-SPD_SOURCES += 16G_2400       # 0b100
-SPD_SOURCES += 16G_2666       # 0b101
-SPD_SOURCES += 8G_3200        # 0b110
-
-bootblock-y += gpio.c
-ramstage-y += gpio.c
diff --git a/src/mainboard/google/hatch/variants/stryke/gpio.c b/src/mainboard/google/hatch/variants/stryke/gpio.c
deleted file mode 100644
index 2734629efb..0000000000
--- a/src/mainboard/google/hatch/variants/stryke/gpio.c
+++ /dev/null
@@ -1,99 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-
-#include <acpi/acpi.h>
-#include <baseboard/gpio.h>
-#include <baseboard/variants.h>
-#include <commonlib/helpers.h>
-
-static const struct pad_config gpio_table[] = {
-	/* A22 : NC */
-	PAD_NC(GPP_A22, NONE),
-	/* A23 : NC */
-	PAD_NC(GPP_A23, NONE),
-	/* B20 : NC */
-	PAD_NC(GPP_B20, NONE),
-	/* B21 : NC */
-	PAD_NC(GPP_B21, NONE),
-	/* B22 : NC */
-	PAD_NC(GPP_B22, NONE),
-	/* C11 : NC */
-	PAD_NC(GPP_C11, NONE),
-	/* C12 : NC */
-	PAD_NC(GPP_C12, NONE),
-	/* C15 : WWAN_DPR_SAR_ODL
-	 *
-	 * TODO: Driver doesn't use this pin as of now. In case driver starts
-	 * using this pin, expose this pin to driver.
-	 */
-	PAD_CFG_GPO(GPP_C15, 1, DEEP),
-	/* F1  : NC */
-	PAD_NC(GPP_F1, NONE),
-	/* F3  : MEM_STRAP_3 */
-	PAD_CFG_GPI(GPP_F3, NONE, PLTRST),
-	/* F10 : MEM_STRAP_2 */
-	PAD_CFG_GPI(GPP_F10, NONE, PLTRST),
-	/* F11 : NC */
-	PAD_NC(GPP_F11, NONE),
-	/* F20 : NC */
-	PAD_NC(GPP_F20, NONE),
-	/* F21 : NC */
-	PAD_NC(GPP_F21, NONE),
-	/* F22 : NC */
-	PAD_NC(GPP_F22, NONE),
-	/* H3  : SPKR_PA_EN */
-	PAD_CFG_GPO(GPP_H3, 0, DEEP),
-	/* H19 : MEM_STRAP_0 */
-	PAD_CFG_GPI(GPP_H19, NONE, PLTRST),
-	/* H22 : MEM_STRAP_1 */
-	PAD_CFG_GPI(GPP_H22, NONE, PLTRST),
-};
-
-const struct pad_config *override_gpio_table(size_t *num)
-{
-	*num = ARRAY_SIZE(gpio_table);
-	return gpio_table;
-}
-
-/*
- * GPIOs configured before ramstage
- * Note: the Hatch platform's romstage will configure
- * the MEM_STRAP_* (a.k.a GPIO_MEM_CONFIG_*) pins
- * as inputs before it reads them, so they are not
- * needed in this table.
- */
-static const struct pad_config early_gpio_table[] = {
-	/* B15 : H1_SLAVE_SPI_CS_L */
-	PAD_CFG_NF(GPP_B15, NONE, DEEP, NF1),
-	/* B16 : H1_SLAVE_SPI_CLK */
-	PAD_CFG_NF(GPP_B16, NONE, DEEP, NF1),
-	/* B17 : H1_SLAVE_SPI_MISO_R */
-	PAD_CFG_NF(GPP_B17, NONE, DEEP, NF1),
-	/* B18 : H1_SLAVE_SPI_MOSI_R */
-	PAD_CFG_NF(GPP_B18, NONE, DEEP, NF1),
-	/* C8  : UART_PCH_RX_DEBUG_TX */
-	PAD_CFG_NF(GPP_C8, NONE, DEEP, NF1),
-	/* C9  : UART_PCH_TX_DEBUG_RX */
-	PAD_CFG_NF(GPP_C9, NONE, DEEP, NF1),
-	/* C14 : BT_DISABLE_L */
-	PAD_CFG_GPO(GPP_C14, 0, DEEP),
-	/* PCH_WP_OD */
-	PAD_CFG_GPI(GPP_C20, NONE, DEEP),
-	/* C21 : H1_PCH_INT_ODL */
-	PAD_CFG_GPI_APIC(GPP_C21, NONE, PLTRST, LEVEL, INVERT),
-	/* C22 : EC_IN_RW_OD */
-	PAD_CFG_GPI(GPP_C22, NONE, DEEP),
-	/* C23 : WLAN_PE_RST# */
-	PAD_CFG_GPO(GPP_C23, 1, DEEP),
-	/* E1  : M2_SSD_PEDET */
-	PAD_CFG_NF(GPP_E1, NONE, DEEP, NF1),
-	/* E5  : SATA_DEVSLP1 */
-	PAD_CFG_NF(GPP_E5, NONE, PLTRST, NF1),
-	/* F2  : MEM_CH_SEL */
-	PAD_CFG_GPI(GPP_F2, NONE, PLTRST),
-};
-
-const struct pad_config *variant_early_gpio_table(size_t *num)
-{
-	*num = ARRAY_SIZE(early_gpio_table);
-	return early_gpio_table;
-}
diff --git a/src/mainboard/google/hatch/variants/stryke/include/variant/acpi/dptf.asl b/src/mainboard/google/hatch/variants/stryke/include/variant/acpi/dptf.asl
deleted file mode 100644
index fd3b5cfb4e..0000000000
--- a/src/mainboard/google/hatch/variants/stryke/include/variant/acpi/dptf.asl
+++ /dev/null
@@ -1,3 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-
-#include <baseboard/acpi/dptf.asl>
diff --git a/src/mainboard/google/hatch/variants/stryke/include/variant/ec.h b/src/mainboard/google/hatch/variants/stryke/include/variant/ec.h
deleted file mode 100644
index ce6fbfe1a4..0000000000
--- a/src/mainboard/google/hatch/variants/stryke/include/variant/ec.h
+++ /dev/null
@@ -1,8 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-
-#ifndef VARIANT_EC_H
-#define VARIANT_EC_H
-
-#include <baseboard/ec.h>
-
-#endif
diff --git a/src/mainboard/google/hatch/variants/stryke/include/variant/gpio.h b/src/mainboard/google/hatch/variants/stryke/include/variant/gpio.h
deleted file mode 100644
index be96d95906..0000000000
--- a/src/mainboard/google/hatch/variants/stryke/include/variant/gpio.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-
-#ifndef VARIANT_GPIO_H
-#define VARIANT_GPIO_H
-
-#include <baseboard/gpio.h>
-
-/* Memory configuration board straps */
-#define GPIO_MEM_CONFIG_0	GPP_H19
-#define GPIO_MEM_CONFIG_1	GPP_H22
-#define GPIO_MEM_CONFIG_2	GPP_F10
-#define GPIO_MEM_CONFIG_3	GPP_F3
-
-#endif
diff --git a/src/mainboard/google/hatch/variants/stryke/overridetree.cb b/src/mainboard/google/hatch/variants/stryke/overridetree.cb
deleted file mode 100644
index aa73ab6df3..0000000000
--- a/src/mainboard/google/hatch/variants/stryke/overridetree.cb
+++ /dev/null
@@ -1,218 +0,0 @@
-chip soc/intel/cannonlake
-
-	register "SerialIoDevMode" = "{
-		[PchSerialIoIndexI2C0] = PchSerialIoPci,
-		[PchSerialIoIndexI2C1] = PchSerialIoPci,
-		[PchSerialIoIndexI2C2] = PchSerialIoDisabled,
-		[PchSerialIoIndexI2C3] = PchSerialIoDisabled,
-		[PchSerialIoIndexI2C4] = PchSerialIoPci,
-		[PchSerialIoIndexI2C5] = PchSerialIoDisabled,
-		[PchSerialIoIndexSPI0] = PchSerialIoPci,
-		[PchSerialIoIndexSPI1] = PchSerialIoDisabled,
-		[PchSerialIoIndexSPI2] = PchSerialIoDisabled,
-		[PchSerialIoIndexUART0] = PchSerialIoSkipInit,
-		[PchSerialIoIndexUART1] = PchSerialIoDisabled,
-		[PchSerialIoIndexUART2] = PchSerialIoDisabled,
-	}"
-
-	register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC2)"	# Type-C Port 0
-	register "usb2_ports[1]" = "USB2_PORT_TYPE_C(OC2)"	# Type-C Port 1
-	register "usb2_ports[2]" = "USB2_PORT_SHORT(OC3)"	# Type-A Port 0
-	register "usb2_ports[6]" = "USB2_PORT_LONG(OC_SKIP)"	#Front Camera
-	register "usb2_ports[9]" = "USB2_PORT_MID(OC_SKIP)"	# BT
-
-	register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC2)"	# Type-C Port 0
-	register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC2)"	# Type-C Port 1
-	register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC3)"	# Type-A Port 0
-
-	# Intel Common SoC Config
-	#+-------------------+---------------------------+
-	#| Field             |  Value                    |
-	#+-------------------+---------------------------+
-	#| GSPI0             | cr50 TPM. Early init is   |
-	#|                   | required to set up a BAR  |
-	#|                   | for TPM communication     |
-	#|                   | before memory is up       |
-	#| GSPI1             |                           |
-	#| I2C0              | Touchpad                  |
-	#| I2C1              | Touch screen              |
-	#| I2C4              | Audio                     |
-	#+-------------------+---------------------------+
-	register "common_soc_config" = "{
-		.gspi[0] = {
-			.speed_mhz = 1,
-			.early_init = 1,
-		},
-		.i2c[0] = {
-			.speed = I2C_SPEED_FAST,
-		},
-		.i2c[1] = {
-			.speed = I2C_SPEED_FAST,
-		},
-		.i2c[4] = {
-			.speed = I2C_SPEED_FAST,
-		},
-	}"
-
-	# GPIO for SD card detect
-	register "sdcard_cd_gpio" = "vSD3_CD_B"
-
-	device domain 0 on
-		device pci 02.0 on	# Integrated Graphics Device
-			register "gfx" = "GMA_DEFAULT_PANEL(0)"
-		end
-		device pci 14.0 on
-			chip drivers/usb/acpi
-				register "desc" = ""Root Hub""
-				register "type" = "UPC_TYPE_HUB"
-				device usb 0.0 on
-					chip drivers/usb/acpi
-						register "desc" = ""Left Type-C Port""
-						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
-						register "group" = "ACPI_PLD_GROUP(1, 1)"
-						device usb 2.0 on end
-					end
-					chip drivers/usb/acpi
-						register "desc" = ""Right Type-C Port 1""
-						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
-						register "group" = "ACPI_PLD_GROUP(2, 1)"
-						device usb 2.1 on end
-					end
-					chip drivers/usb/acpi
-						register "desc" = ""Left Type-A Port""
-						register "type" = "UPC_TYPE_A"
-						register "group" = "ACPI_PLD_GROUP(1, 2)"
-						device usb 2.2 on end
-					end
-					chip drivers/usb/acpi
-						# No Type-A Port 1
-						device usb 2.3 off end
-					end
-					chip drivers/usb/acpi
-						# Unused
-						device usb 2.4 off end
-					end
-					chip drivers/usb/acpi
-						# No WWAN
-						device usb 2.5 off end
-					end
-					chip drivers/usb/acpi
-						register "desc" = ""Camera""
-						register "type" = "UPC_TYPE_INTERNAL"
-						device usb 2.6 on end
-					end
-					chip drivers/usb/acpi
-						# Unused
-						device usb 2.7 off end
-					end
-					chip drivers/usb/acpi
-						# Unused
-						device usb 2.8 off end
-					end
-					chip drivers/usb/acpi
-						register "desc" = ""Bluetooth""
-						register "type" = "UPC_TYPE_INTERNAL"
-						register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C14)"
-						device usb 2.9 on end
-					end
-					chip drivers/usb/acpi
-						register "desc" = ""Left Type-C Port""
-						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
-						register "group" = "ACPI_PLD_GROUP(1, 1)"
-						device usb 3.0 on end
-					end
-					chip drivers/usb/acpi
-						register "desc" = ""Right Type-C Port 1""
-						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
-						register "group" = "ACPI_PLD_GROUP(2, 1)"
-						device usb 3.1 on end
-					end
-					chip drivers/usb/acpi
-						register "desc" = ""Left Type-A Port""
-						register "type" = "UPC_TYPE_USB3_A"
-						register "group" = "ACPI_PLD_GROUP(1, 2)"
-						device usb 3.2 on end
-					end
-					chip drivers/usb/acpi
-						# No Type-A Port 1
-						device usb 3.3 off end
-					end
-					chip drivers/usb/acpi
-						# No WWAN
-						device usb 3.4 off end
-					end
-					chip drivers/usb/acpi
-						# Unused
-						device usb 3.5 off end
-					end
-				end
-			end
-		end # USB xHCI
-		device pci 15.0 on
-			chip drivers/i2c/generic
-				register "hid" = ""ELAN0000""
-				register "desc" = ""ELAN Touchpad""
-				register "irq" = "ACPI_IRQ_WAKE_EDGE_LOW(GPP_A21_IRQ)"
-				register "wake" = "GPE0_DW0_21"
-				register "probed" = "1"
-				device i2c 15 on end
-			end
-		end # I2C #0
-		device pci 15.1 on
-			chip drivers/i2c/generic
-				register "hid" = ""ELAN0001""
-				register "desc" = ""ELAN Touchscreen""
-				register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_D16_IRQ)"
-				register "probed" = "1"
-				register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D15)"
-				register "reset_delay_ms" = "100"
-				register "reset_off_delay_ms" = "5"
-				register "has_power_resource" = "1"
-				register "stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C4)"
-				register "stop_off_delay_ms" = "5"
-				device i2c 49 on end
-			end
-			chip drivers/i2c/hid
-				register "generic.hid" = ""GDIX0000""
-				register "generic.desc" = ""Goodix Touchscreen""
-				register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_D16_IRQ)"
-				register "generic.probed" = "1"
-				register "generic.reset_gpio" =
-							"ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D15)"
-				register "generic.reset_delay_ms" = "120"
-				register "generic.reset_off_delay_ms" = "3"
-				register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D9)"
-				register "generic.enable_delay_ms" = "12"
-				register "generic.has_power_resource" = "1"
-				register "hid_desc_reg_offset" = "0x01"
-				device i2c 5d on end
-			end
-		end # I2C #1
-		device pci 15.2 off end # I2C #2
-		device pci 15.3 off end # I2C #3
-		device pci 19.0 on
-			chip drivers/i2c/generic
-				register "hid" = ""10EC5682""
-				register "name" = ""RT58""
-				register "desc" = ""Realtek RT5682""
-				register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_H0)"
-				register "property_count" = "1"
-				# Set the jd_src to RT5668_JD1 for jack detection
-				register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER"
-				register "property_list[0].name" = ""realtek,jd-src""
-				register "property_list[0].integer" = "1"
-				device i2c 1a on end
-			end
-		end #I2C #4
-		device pci 1e.3 off end # GSPI #1
-		device pci 1f.3 on
-			chip drivers/generic/max98357a
-				register "hid" = ""MX98357A""
-				register "sdmode_gpio" =  "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_H3)"
-				register "sdmode_delay" = "5"
-				device generic 0 on end
-			end
-		end # Intel HDA
-	end
-
-end