hatch: Create ambassador variant

Create the ambassador variant of the puff reference board by copying
the template files to a new directory named for the variant.

(Auto-Generated by create_coreboot_variant.sh version 4.2.0).

BUG=b:171561514
BRANCH=None
TEST=util/abuild/abuild -p none -t google/hatch -x -a
make sure the build includes GOOGLE_AMBASSADOR

Signed-off-by: Matt Ziegelbaum <ziegs@chromium.org>
Change-Id: Ib0e3a813a120a4a8e984f3a89dc3ba100d94da95
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46829
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>

5 files changed, 615 insertions, 0 deletions

diff --git a/src/mainboard/google/hatch/variants/ambassador/Makefile.inc b/src/mainboard/google/hatch/variants/ambassador/Makefile.inc
new file mode 100644
index 0000000000..3b5b7d000d
--- /dev/null
+++ b/src/mainboard/google/hatch/variants/ambassador/Makefile.inc
@@ -0,0 +1,4 @@
+## SPDX-License-Identifier: GPL-2.0-only
+
+ramstage-y += gpio.c
+bootblock-y += gpio.c
diff --git a/src/mainboard/google/hatch/variants/ambassador/gpio.c b/src/mainboard/google/hatch/variants/ambassador/gpio.c
new file mode 100644
index 0000000000..5a911fc4f9
--- /dev/null
+++ b/src/mainboard/google/hatch/variants/ambassador/gpio.c
@@ -0,0 +1,115 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <baseboard/gpio.h>
+#include <baseboard/variants.h>
+#include <commonlib/helpers.h>
+
+static const struct pad_config gpio_table[] = {
+	/* A16 : SD_OC_ODL */
+	PAD_CFG_GPI(GPP_A16, NONE, DEEP),
+	/* A18 : LAN_PE_ISOLATE_ODL */
+	PAD_CFG_GPO(GPP_A18, 1, DEEP),
+	/* A23 : M2_WLAN_INT_ODL */
+	PAD_CFG_GPI_APIC(GPP_A23, NONE, PLTRST, LEVEL, INVERT),
+
+	/* B5 : LAN_CLKREQ_ODL */
+	PAD_CFG_NF(GPP_B5, NONE, DEEP, NF1),
+
+	/* C0 : SMBCLK */
+	PAD_CFG_NF(GPP_C0, NONE, DEEP, NF1),
+	/* C1 : SMBDATA */
+	PAD_CFG_NF(GPP_C1, NONE, DEEP, NF1),
+	/* C6: M2_WLAN_WAKE_ODL */
+	PAD_CFG_GPI_SCI_LOW(GPP_C6, NONE, DEEP, EDGE_SINGLE),
+	/* C7 : LAN_WAKE_ODL */
+	PAD_CFG_GPI_SCI_LOW(GPP_C7, NONE, DEEP, EDGE_SINGLE),
+	/* C10 : PCH_PCON_RST_ODL */
+	PAD_CFG_GPO(GPP_C10, 1, DEEP),
+	/* C11 : PCH_PCON_PDB_ODL */
+	PAD_CFG_GPO(GPP_C11, 1, DEEP),
+	/* C15  : WLAN_OFF_L */
+	PAD_CFG_GPO(GPP_C15, 1, DEEP),
+
+	/* E2  : EN_PP_MST_OD */
+	PAD_CFG_GPO(GPP_E2, 1, DEEP),
+	/* E9 : USB_A0_OC_ODL */
+	PAD_CFG_NF(GPP_E9, NONE, DEEP, NF1),
+	/* E10 : USB_A1_OC_ODL */
+	PAD_CFG_NF(GPP_E10, NONE, DEEP, NF1),
+
+	/* F11 : EMMC_CMD */
+	PAD_CFG_NF(GPP_F11, NONE, DEEP, NF1),
+	/* F12 : EMMC_DATA0 */
+	PAD_CFG_NF(GPP_F12, NONE, DEEP, NF1),
+	/* F13 : EMMC_DATA1 */
+	PAD_CFG_NF(GPP_F13, NONE, DEEP, NF1),
+	/* F14 : EMMC_DATA2 */
+	PAD_CFG_NF(GPP_F14, NONE, DEEP, NF1),
+	/* F15 : EMMC_DATA3 */
+	PAD_CFG_NF(GPP_F15, NONE, DEEP, NF1),
+	/* F16 : EMMC_DATA4 */
+	PAD_CFG_NF(GPP_F16, NONE, DEEP, NF1),
+	/* F17 : EMMC_DATA5 */
+	PAD_CFG_NF(GPP_F17, NONE, DEEP, NF1),
+	/* F18 : EMMC_DATA6 */
+	PAD_CFG_NF(GPP_F18, NONE, DEEP, NF1),
+	/* F19 : EMMC_DATA7 */
+	PAD_CFG_NF(GPP_F19, NONE, DEEP, NF1),
+	/* F20 : EMMC_RCLK */
+	PAD_CFG_NF(GPP_F20, NONE, DEEP, NF1),
+	/* F21 : EMMC_CLK */
+	PAD_CFG_NF(GPP_F21, NONE, DEEP, NF1),
+	/* F22 : EMMC_RST_L */
+	PAD_CFG_NF(GPP_F22, NONE, DEEP, NF1),
+
+	/* H4: PCH_I2C_PCON_SDA */
+	PAD_CFG_NF(GPP_H4, NONE, DEEP, NF1),
+	/* H5: PCH_I2C_PCON_SCL */
+	PAD_CFG_NF(GPP_H5, NONE, DEEP, NF1),
+	/* H22 : PWM_PP3300_BIOZZER */
+	PAD_CFG_GPO(GPP_H22, 0, DEEP),
+};
+
+const struct pad_config *override_gpio_table(size_t *num)
+{
+	*num = ARRAY_SIZE(gpio_table);
+	return gpio_table;
+}
+
+/* Early pad configuration in bootblock */
+static const struct pad_config early_gpio_table[] = {
+	/* B14 : GPP_B14_STRAP */
+	PAD_NC(GPP_B14, NONE),
+	/* B22 : GPP_B22_STRAP */
+	PAD_NC(GPP_B22, NONE),
+	/* E19 : GPP_E19_STRAP */
+	PAD_NC(GPP_E19, NONE),
+	/* E21 : GPP_E21_STRAP */
+	PAD_NC(GPP_E21, NONE),
+	/* B15 : H1_SLAVE_SPI_CS_L */
+	PAD_CFG_NF(GPP_B15, NONE, DEEP, NF1),
+	/* B16 : H1_SLAVE_SPI_CLK */
+	PAD_CFG_NF(GPP_B16, NONE, DEEP, NF1),
+	/* B17 : H1_SLAVE_SPI_MISO_R */
+	PAD_CFG_NF(GPP_B17, NONE, DEEP, NF1),
+	/* B18 : H1_SLAVE_SPI_MOSI_R */
+	PAD_CFG_NF(GPP_B18, NONE, DEEP, NF1),
+	/* C14 : BT_DISABLE_L */
+	PAD_CFG_GPO(GPP_C14, 0, DEEP),
+	/* PCH_WP_OD */
+	PAD_CFG_GPI(GPP_C20, NONE, DEEP),
+	/* C21 : H1_PCH_INT_ODL */
+	PAD_CFG_GPI_APIC(GPP_C21, NONE, PLTRST, LEVEL, INVERT),
+	/* C23 : WLAN_PE_RST# */
+	PAD_CFG_GPO(GPP_C23, 1, DEEP),
+	/* E1  : M2_SSD_PEDET */
+	PAD_CFG_NF(GPP_E1, NONE, DEEP, NF1),
+	/* E5  : SATA_DEVSLP1 */
+	PAD_CFG_NF(GPP_E5, NONE, PLTRST, NF1),
+};
+
+const struct pad_config *variant_early_gpio_table(size_t *num)
+{
+	*num = ARRAY_SIZE(early_gpio_table);
+	return early_gpio_table;
+}
diff --git a/src/mainboard/google/hatch/variants/ambassador/include/variant/ec.h b/src/mainboard/google/hatch/variants/ambassador/include/variant/ec.h
new file mode 100644
index 0000000000..59fb3783c5
--- /dev/null
+++ b/src/mainboard/google/hatch/variants/ambassador/include/variant/ec.h
@@ -0,0 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef VARIANT_EC_H
+#define VARIANT_EC_H
+
+#include <puff/ec.h>
+
+#endif
diff --git a/src/mainboard/google/hatch/variants/ambassador/include/variant/gpio.h b/src/mainboard/google/hatch/variants/ambassador/include/variant/gpio.h
new file mode 100644
index 0000000000..79a141008f
--- /dev/null
+++ b/src/mainboard/google/hatch/variants/ambassador/include/variant/gpio.h
@@ -0,0 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef VARIANT_GPIO_H
+#define VARIANT_GPIO_H
+
+#include <baseboard/gpio.h>
+
+#endif
diff --git a/src/mainboard/google/hatch/variants/ambassador/overridetree.cb b/src/mainboard/google/hatch/variants/ambassador/overridetree.cb
new file mode 100644
index 0000000000..adb00e485f
--- /dev/null
+++ b/src/mainboard/google/hatch/variants/ambassador/overridetree.cb
@@ -0,0 +1,480 @@
+chip soc/intel/cannonlake
+	# Enable heci communication
+	register "HeciEnabled" = "1"
+
+	# Auto-switch between X4 NVMe and X2 NVMe.
+	register "TetonGlacierMode" = "1"
+
+	register "SerialIoDevMode" = "{
+		[PchSerialIoIndexI2C0]  = PchSerialIoDisabled,
+		[PchSerialIoIndexI2C1]  = PchSerialIoDisabled,
+		[PchSerialIoIndexI2C2]  = PchSerialIoPci,
+		[PchSerialIoIndexI2C3]  = PchSerialIoPci,
+		[PchSerialIoIndexI2C4]  = PchSerialIoPci,
+		[PchSerialIoIndexI2C5]  = PchSerialIoPci,
+		[PchSerialIoIndexSPI0] = PchSerialIoPci,
+		[PchSerialIoIndexSPI1] = PchSerialIoPci,
+		[PchSerialIoIndexSPI2] = PchSerialIoDisabled,
+		[PchSerialIoIndexUART0] = PchSerialIoSkipInit,
+		[PchSerialIoIndexUART1] = PchSerialIoDisabled,
+		[PchSerialIoIndexUART2] = PchSerialIoDisabled,
+	}"
+
+	# USB configuration
+	register "usb2_ports[0]" = "{
+		.enable = 1,
+		.ocpin = OC2,
+		.tx_bias = USB2_BIAS_0MV,
+		.tx_emp_enable = USB2_PRE_EMP_ON,
+		.pre_emp_bias  = USB2_BIAS_11P25MV,
+		.pre_emp_bit   = USB2_HALF_BIT_PRE_EMP,
+	}" # Type-A Port 2
+	register "usb2_ports[1]" = "{
+		.enable = 1,
+		.ocpin = OC1,
+		.tx_bias = USB2_BIAS_0MV,
+		.tx_emp_enable = USB2_PRE_EMP_ON,
+		.pre_emp_bias  = USB2_BIAS_28P15MV,
+		.pre_emp_bit   = USB2_HALF_BIT_PRE_EMP,
+	}" # Type-A Port 1
+	register "usb2_ports[2]" = "{
+		.enable = 1,
+		.ocpin = OC3,
+		.tx_bias = USB2_BIAS_0MV,
+		.tx_emp_enable = USB2_PRE_EMP_ON,
+		.pre_emp_bias  = USB2_BIAS_28P15MV,
+		.pre_emp_bit   = USB2_HALF_BIT_PRE_EMP,
+	}" # Type-A Port 3
+	register "usb2_ports[3]" = "USB2_PORT_TYPE_C(OC_SKIP)" # Type-C Port
+	register "usb2_ports[4]" = "{
+		.enable = 1,
+		.ocpin = OC_SKIP,
+		.tx_bias = USB2_BIAS_0MV,
+		.tx_emp_enable = USB2_PRE_EMP_ON,
+		.pre_emp_bias  = USB2_BIAS_28P15MV,
+		.pre_emp_bit   = USB2_HALF_BIT_PRE_EMP,
+	}" # Type-A Port 4
+	register "usb2_ports[5]" = "{
+		.enable = 1,
+		.ocpin = OC0,
+		.tx_bias = USB2_BIAS_0MV,
+		.tx_emp_enable = USB2_PRE_EMP_ON,
+		.pre_emp_bias  = USB2_BIAS_28P15MV,
+		.pre_emp_bit   = USB2_HALF_BIT_PRE_EMP,
+	}" # Type-A port 0
+	register "usb2_ports[6]" = "USB2_PORT_EMPTY"
+	register "usb2_ports[7]" = "USB2_PORT_EMPTY"
+	register "usb2_ports[8]" = "USB2_PORT_EMPTY"
+	register "usb2_ports[9]" = "{
+		.enable = 1,
+		.ocpin = OC_SKIP,
+		.tx_bias = USB2_BIAS_0MV,
+		.tx_emp_enable = USB2_PRE_EMP_ON,
+		.pre_emp_bias  = USB2_BIAS_28P15MV,
+		.pre_emp_bit   = USB2_HALF_BIT_PRE_EMP,
+	}" # BT
+
+	register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC2)"     # Type-A Port 2
+	register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC3)"     # Type-A Port 3
+	register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC1)"     # Type-A Port 1
+	register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C
+	register "usb3_ports[4]" = "USB3_PORT_DEFAULT(OC0)"     # Type-A Port 0
+	register "usb3_ports[5]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-A Port 4
+
+	# Bitmap for Wake Enable on USB attach/detach
+	register "usb2_wake_enable_bitmap" = "USB_PORT_WAKE_ENABLE(1) | \
+					      USB_PORT_WAKE_ENABLE(2) | \
+					      USB_PORT_WAKE_ENABLE(3) | \
+					      USB_PORT_WAKE_ENABLE(5) | \
+					      USB_PORT_WAKE_ENABLE(6)"
+	register "usb3_wake_enable_bitmap" = "USB_PORT_WAKE_ENABLE(1) | \
+					      USB_PORT_WAKE_ENABLE(2) | \
+					      USB_PORT_WAKE_ENABLE(3) | \
+					      USB_PORT_WAKE_ENABLE(5) | \
+					      USB_PORT_WAKE_ENABLE(6)"
+
+	# Enable eMMC HS400
+	register "ScsEmmcHs400Enabled" = "1"
+
+	# EMMC Tx CMD Delay
+	# Refer to EDS-Vol2-14.3.7.
+	# [14:8] steps of delay for DDR mode, each 125ps, range: 0 - 39.
+	# [6:0] steps of delay for SDR mode, each 125ps, range: 0 - 39.
+	register "common_soc_config.emmc_dll.emmc_tx_cmd_cntl" = "0x505"
+
+	# EMMC TX DATA Delay 1
+	# Refer to EDS-Vol2-14.3.8.
+	# [14:8] steps of delay for HS400, each 125ps, range: 0 - 78.
+	# [6:0] steps of delay for SDR104/HS200, each 125ps, range: 0 - 79.
+	register "common_soc_config.emmc_dll.emmc_tx_data_cntl1" = "0x911"
+
+	# EMMC TX DATA Delay 2
+	# Refer to EDS-Vol2-14.3.9.
+	# [30:24] steps of delay for SDR50, each 125ps, range: 0 - 79.
+	# [22:16] steps of delay for DDR50, each 125ps, range: 0 - 78.
+	# [14:8] steps of delay for SDR25/HS50, each 125ps, range: 0 -79.
+	# [6:0] steps of delay for SDR12, each 125ps. Range: 0 - 79.
+	register "common_soc_config.emmc_dll.emmc_tx_data_cntl2" = "0x1C262828"
+
+	# EMMC RX CMD/DATA Delay 1
+	# Refer to EDS-Vol2-14.3.10.
+	# [30:24] steps of delay for SDR50, each 125ps, range: 0 - 119.
+	# [22:16] steps of delay for DDR50, each 125ps, range: 0 - 78.
+	# [14:8] steps of delay for SDR25/HS50, each 125ps, range: 0 - 119.
+	# [6:0] steps of delay for SDR12, each 125ps, range: 0 - 119.
+	register "common_soc_config.emmc_dll.emmc_rx_cmd_data_cntl1" = "0x1C16583b"
+
+	# EMMC RX CMD/DATA Delay 2
+	# Refer to EDS-Vol2-14.3.12.
+	# [17:16] stands for Rx Clock before Output Buffer,
+	#         00: Rx clock after output buffer,
+	#         01: Rx clock before output buffer,
+	#         10: Automatic selection based on working mode.
+	#         11: Reserved
+	# [14:8] steps of delay for Auto Tuning Mode, each 125ps, range: 0 - 39.
+	# [6:0] steps of delay for HS200, each 125ps, range: 0 - 79.
+	register "common_soc_config.emmc_dll.emmc_rx_cmd_data_cntl2" = "0x1001D"
+
+	# EMMC Rx Strobe Delay
+	# Refer to EDS-Vol2-14.3.11.
+	# [14:8] Rx Strobe Delay DLL 1(HS400 Mode), each 125ps, range: 0 - 39.
+	# [6:0] Rx Strobe Delay DLL 2(HS400 Mode), each 125ps, range: 0 - 39.
+	register "common_soc_config.emmc_dll.emmc_rx_strobe_cntl" = "0x1515"
+
+	# Intel HDA - disable I2S Audio SSP1 and DMIC0 as puff variant does not have them.
+	register "PchHdaAudioLinkSsp1" = "0"
+	register "PchHdaAudioLinkDmic0" = "0"
+
+	# Intel Common SoC Config
+	#+-------------------+---------------------------+
+	#| Field             |  Value                    |
+	#+-------------------+---------------------------+
+	#| GSPI0             | cr50 TPM. Early init is   |
+	#|                   | required to set up a BAR  |
+	#|                   | for TPM communication     |
+	#|                   | before memory is up       |
+	#| I2C0              | RFU                       |
+	#| I2C2              | PS175                     |
+	#| I2C3              | MST                       |
+	#| I2C4              | Audio                     |
+	#+-------------------+---------------------------+
+	register "common_soc_config" = "{
+		.gspi[0] = {
+			.speed_mhz = 1,
+			.early_init = 1,
+		},
+		.i2c[0] = {
+			.speed = I2C_SPEED_FAST,
+			.rise_time_ns = 0,
+			.fall_time_ns = 0,
+		},
+		.i2c[2] = {
+			.speed = I2C_SPEED_FAST,
+			.rise_time_ns = 60,
+			.fall_time_ns = 60,
+		},
+		.i2c[3] = {
+			.speed = I2C_SPEED_FAST,
+			.rise_time_ns = 60,
+			.fall_time_ns = 60,
+		},
+		.i2c[4] = {
+			.speed = I2C_SPEED_FAST,
+			.rise_time_ns = 60,
+			.fall_time_ns = 60,
+		},
+	}"
+
+	# PCIe port 7 for LAN
+	register "PcieRpEnable[6]" = "1"
+	register "PcieRpLtrEnable[6]" = "1"
+	# PCIe port 11 (x2) for NVMe hybrid storage devices
+	register "PcieRpEnable[10]" = "1"
+	register "PcieRpLtrEnable[10]" = "1"
+	# Uses CLK SRC 0
+	register "PcieClkSrcUsage[0]" = "6"
+	register "PcieClkSrcClkReq[0]" = "0"
+
+	# GPIO for SD card detect
+	register "sdcard_cd_gpio" = "vSD3_CD_B"
+
+	# SATA port 1 Gen3 Strength
+	# Port1 Tx De-Emphasis = 20*log(0x20/64) = -6dB
+	register "sata_port[1].TxGen3DeEmphEnable" = "1"
+	register "sata_port[1].TxGen3DeEmph" = "0x20"
+
+	device domain 0 on
+		device pci 04.0 on
+			chip drivers/intel/dptf
+				## Active Policy
+				register "policies.active[0]" = "{.target=DPTF_CPU,
+					.thresholds={TEMP_PCT(90, 85),
+						     TEMP_PCT(85, 75),
+						     TEMP_PCT(80, 65),
+						     TEMP_PCT(75, 55),
+						     TEMP_PCT(70, 45),}}"
+				register "policies.active[1]" = "{.target=DPTF_TEMP_SENSOR_0,
+					.thresholds={TEMP_PCT(50, 85),
+						     TEMP_PCT(47, 75),
+						     TEMP_PCT(45, 65),
+						     TEMP_PCT(42, 55),
+						     TEMP_PCT(39, 45),}}"
+
+				## Passive Policy
+				register "policies.passive[0]" = "DPTF_PASSIVE(CPU, CPU,           93, 5000)"
+				register "policies.passive[1]" = "DPTF_PASSIVE(CPU, TEMP_SENSOR_0, 65, 6000)"
+
+				## Critical Policy
+				register "policies.critical[0]" = "DPTF_CRITICAL(CPU,          100, SHUTDOWN)"
+				register "policies.critical[1]" = "DPTF_CRITICAL(TEMP_SENSOR_0, 75, SHUTDOWN)"
+
+				## Power Limits Control
+				# PL1 is fixed at 15W, avg over 28-32s interval
+				# 25-64W PL2 in 1000mW increments, avg over 28-32s interval
+				register "controls.power_limits.pl1" = "{
+					.min_power = 15000,
+					.max_power = 15000,
+					.time_window_min = 28 * MSECS_PER_SEC,
+					.time_window_max = 32 * MSECS_PER_SEC,
+					.granularity = 200,}"
+				register "controls.power_limits.pl2" = "{
+					.min_power = 25000,
+					.max_power = 64000,
+					.time_window_min = 28 * MSECS_PER_SEC,
+					.time_window_max = 32 * MSECS_PER_SEC,
+					.granularity = 1000,}"
+
+				## Charger Performance Control (Control, mA)
+				register "controls.charger_perf[0]" = "{ 255, 1700 }"
+				register "controls.charger_perf[1]" = "{  24, 1500 }"
+				register "controls.charger_perf[2]" = "{  16, 1000 }"
+				register "controls.charger_perf[3]" = "{   8,  500 }"
+
+				## Fan Performance Control (Percent, Speed, Noise, Power)
+				register "controls.fan_perf[0]" = "{  90, 6700, 220, 2200, }"
+				register "controls.fan_perf[1]" = "{  80, 5800, 180, 1800, }"
+				register "controls.fan_perf[2]" = "{  70, 5000, 145, 1450, }"
+				register "controls.fan_perf[3]" = "{  60, 4900, 115, 1150, }"
+				register "controls.fan_perf[4]" = "{  50, 3838,  90,  900, }"
+				register "controls.fan_perf[5]" = "{  40, 2904,  55,  550, }"
+				register "controls.fan_perf[6]" = "{  30, 2337,  30,  300, }"
+				register "controls.fan_perf[7]" = "{  20, 1608,  15,  150, }"
+				register "controls.fan_perf[8]" = "{  10,  800,  10,  100, }"
+				register "controls.fan_perf[9]" = "{   0,    0,   0,   50, }"
+
+				# Fan options
+				register "options.fan.fine_grained_control" = "1"
+				register "options.fan.step_size" = "2"
+
+				device generic 0 on end
+			end
+		end # DPTF 0x1903
+		device pci 14.0 on
+			chip drivers/usb/acpi
+				device usb 0.0 on
+					chip drivers/usb/acpi
+						register "desc" = ""USB2 Type-A Front Left""
+						register "type" = "UPC_TYPE_A"
+						register "group" = "ACPI_PLD_GROUP(0, 0)"
+						device usb 2.0 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB2 Type-C Port Rear""
+						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
+						register "group" = "ACPI_PLD_GROUP(1, 3)"
+						device usb 2.1 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB2 Type-A Front Right""
+						register "type" = "UPC_TYPE_A"
+						register "group" = "ACPI_PLD_GROUP(0, 1)"
+						device usb 2.2 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB2 Type-A Rear Right""
+						register "type" = "UPC_TYPE_A"
+						register "group" = "ACPI_PLD_GROUP(1, 2)"
+						device usb 2.3 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB2 Type-A Rear Middle""
+						register "type" = "UPC_TYPE_A"
+						register "group" = "ACPI_PLD_GROUP(1, 1)"
+						device usb 2.4 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB2 Type-A Rear Left""
+						register "type" = "UPC_TYPE_A"
+						register "group" = "ACPI_PLD_GROUP(1, 0)"
+						device usb 2.5 on end
+					end
+					chip drivers/usb/acpi
+						device usb 2.6 off end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB3 Type-A Front Left""
+						register "type" = "UPC_TYPE_USB3_A"
+						register "group" = "ACPI_PLD_GROUP(0, 0)"
+						device usb 3.0 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB3 Type-A Front Right""
+						register "type" = "UPC_TYPE_USB3_A"
+						register "group" = "ACPI_PLD_GROUP(0, 1)"
+						device usb 3.1 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB3 Type-A Rear Right""
+						register "type" = "UPC_TYPE_USB3_A"
+						register "group" = "ACPI_PLD_GROUP(1, 2)"
+						device usb 3.2 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB3 Type-C Rear""
+						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
+						register "group" = "ACPI_PLD_GROUP(1, 3)"
+						device usb 3.3 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB3 Type-A Rear Left""
+						register "type" = "UPC_TYPE_USB3_A"
+						register "group" = "ACPI_PLD_GROUP(1, 0)"
+						device usb 3.4 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB3 Type-A Rear Middle""
+						register "type" = "UPC_TYPE_USB3_A"
+						register "group" = "ACPI_PLD_GROUP(1, 1)"
+						device usb 3.5 on end
+					end
+				end
+			end
+		end # USB xHCI
+		device pci 15.0 off
+			# RFU - Reserved for Future Use.
+		end # I2C #0
+		device pci 15.1 off end # I2C #1
+		device pci 15.2 on
+			chip drivers/i2c/generic
+				register "hid" = ""1AF80175""
+				register "name" = ""PS17""
+				register "desc" = ""Parade PS175""
+				device i2c 4a on end
+			end
+		end # I2C #2, PCON PS175.
+		device pci 15.3 on
+			chip drivers/i2c/generic
+				register "hid" = ""10EC2142""
+				register "name" = ""RTD2""
+				register "desc" = ""Realtek RTD2142""
+				device i2c 4a on end
+			end
+		end # I2C #3, Realtek RTD2142.
+		device pci 19.0 on
+			chip drivers/i2c/generic
+				register "hid" = ""10EC5682""
+				register "name" = ""RT58""
+				register "desc" = ""Realtek RT5682""
+				register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_H0)"
+				register "property_count" = "1"
+				# Set the jd_src to RT5668_JD1 for jack detection
+				register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER"
+				register "property_list[0].name" = ""realtek,jd-src""
+				register "property_list[0].integer" = "1"
+				device i2c 1a on end
+			end
+		end #I2C #4
+		device pci 1a.0 on  end # eMMC
+		device pci 1c.6 on
+			chip drivers/net
+				register "customized_leds" = "0x05af"
+				register "wake" = "GPE0_DW1_07" # GPP_C7
+				register "stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_A18)"
+				register "stop_delay_ms" = "12" # NIC needs time to quiesce
+				register "stop_off_delay_ms" = "1"
+				register "has_power_resource" = "1"
+				register "device_index" = "0"
+				device pci 00.0 on end
+			end
+		end # RTL8111H Ethernet NIC
+		device pci 1d.2 on end # PCI Express Port 11 (X2 NVMe)
+		device pci 1e.3 off end # GSPI #1
+	end
+
+	# VR Settings Configuration for 4 Domains
+	#+----------------+-------+-------+-------+-------+
+	#| Domain/Setting |  SA   |  IA   | GTUS  |  GTS  |
+	#+----------------+-------+-------+-------+-------+
+	#| Psi1Threshold  | 20A   | 20A   | 20A   | 20A   |
+	#| Psi2Threshold  | 5A    | 5A    | 5A    | 5A    |
+	#| Psi3Threshold  | 1A    | 1A    | 1A    | 1A    |
+	#| Psi3Enable     | 1     | 1     | 1     | 1     |
+	#| Psi4Enable     | 1     | 1     | 1     | 1     |
+	#| ImonSlope      | 0     | 0     | 0     | 0     |
+	#| ImonOffset     | 0     | 0     | 0     | 0     |
+	#| VrVoltageLimit | 1.52V | 1.52V | 1.52V | 1.52V |
+	#| AcLoadline     | 10.04 | 1.81  | 3.19  | 3.19  |
+	#| DcLoadline     | 10.04 | 1.81  | 3.19  | 3.19  |
+	#+----------------+-------+-------+-------+-------+
+	#Note: IccMax settings are moved to SoC code
+	register "domain_vr_config[VR_SYSTEM_AGENT]" = "{
+		.vr_config_enable = 1,
+		.psi1threshold = VR_CFG_AMP(20),
+		.psi2threshold = VR_CFG_AMP(5),
+		.psi3threshold = VR_CFG_AMP(1),
+		.psi3enable = 1,
+		.psi4enable = 1,
+		.imon_slope = 0x0,
+		.imon_offset = 0x0,
+		.icc_max = 0,
+		.voltage_limit = 1520,
+		.ac_loadline = 1004,
+		.dc_loadline = 1004,
+	}"
+
+	register "domain_vr_config[VR_IA_CORE]" = "{
+		.vr_config_enable = 1,
+		.psi1threshold = VR_CFG_AMP(20),
+		.psi2threshold = VR_CFG_AMP(5),
+		.psi3threshold = VR_CFG_AMP(1),
+		.psi3enable = 1,
+		.psi4enable = 1,
+		.imon_slope = 0x0,
+		.imon_offset = 0x0,
+		.icc_max = 0,
+		.voltage_limit = 1520,
+		.ac_loadline = 181,
+		.dc_loadline = 181,
+	}"
+
+	register "domain_vr_config[VR_GT_UNSLICED]" = "{
+		.vr_config_enable = 1,
+		.psi1threshold = VR_CFG_AMP(20),
+		.psi2threshold = VR_CFG_AMP(5),
+		.psi3threshold = VR_CFG_AMP(1),
+		.psi3enable = 1,
+		.psi4enable = 1,
+		.imon_slope = 0x0,
+		.imon_offset = 0x0,
+		.icc_max = 0,
+		.voltage_limit = 1520,
+		.ac_loadline = 319,
+		.dc_loadline = 319,
+	}"
+
+	register "domain_vr_config[VR_GT_SLICED]" = "{
+		.vr_config_enable = 1,
+		.psi1threshold = VR_CFG_AMP(20),
+		.psi2threshold = VR_CFG_AMP(5),
+		.psi3threshold = VR_CFG_AMP(1),
+		.psi3enable = 1,
+		.psi4enable = 1,
+		.imon_slope = 0x0,
+		.imon_offset = 0x0,
+		.icc_max = 0,
+		.voltage_limit = 1520,
+		.ac_loadline = 319,
+		.dc_loadline = 319,
+	}"
+
+end