coreboot: Replace all IS_ENABLED(CONFIG_XXX) with CONFIG(XXX)

This patch is a raw application of

 find src/ -type f | xargs sed -i -e 's/IS_ENABLED\s*(CONFIG_/CONFIG(/g'

Change-Id: I6262d6d5c23cabe23c242b4f38d446b74fe16b88
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31774
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>

8 files changed, 32 insertions, 32 deletions

diff --git a/src/mainboard/google/gru/board.h b/src/mainboard/google/gru/board.h
index 41157f0ef3..e9545de625 100644
--- a/src/mainboard/google/gru/board.h
+++ b/src/mainboard/google/gru/board.h
@@ -24,7 +24,7 @@
 #define GPIO_RESET	GPIO(0, B, 3)
 #define GPIO_SDMMC_PWR	GPIO(4, D, 5)
 
-#if IS_ENABLED(CONFIG_GRU_BASEBOARD_SCARLET)
+#if CONFIG(GRU_BASEBOARD_SCARLET)
 #define GPIO_BL_EN	GPIO(4, C, 5)
 #define GPIO_BACKLIGHT	GPIO(4, C, 6)
 #define GPIO_EC_IN_RW	GPIO(0, A, 1)
@@ -50,7 +50,7 @@
 #define GPIO_WP		GPIO(1, C, 2)
 #endif
 
-#if IS_ENABLED(CONFIG_GRU_HAS_WLAN_RESET)
+#if CONFIG(GRU_HAS_WLAN_RESET)
 #define GPIO_WLAN_RST_L	GPIO(1, B, 3)
 #else
 #define GPIO_WLAN_RST_L	dead_code_t(gpio_t, "no WLAN reset on this board in FW")
diff --git a/src/mainboard/google/gru/boardid.c b/src/mainboard/google/gru/boardid.c
index 5b2985a7c2..4630a9170b 100644
--- a/src/mainboard/google/gru/boardid.c
+++ b/src/mainboard/google/gru/boardid.c
@@ -22,7 +22,7 @@
 static const int id_readings[] = {
 /*	ID : Volts : ADC value :    Bucket	*/
 /*	==   =====   =========    ==========	*/
-#if IS_ENABLED(CONFIG_BOARD_GOOGLE_KEVIN)
+#if CONFIG(BOARD_GOOGLE_KEVIN)
 /*	 0 : 0.109V:        62 :    0 -   91	*/	91,
 #else
 /*	 0 : 0.074V:        42 :    0 -   81	*/	81,
@@ -80,7 +80,7 @@ uint32_t ram_code(void)
 
 uint32_t sku_id(void)
 {
-	if (!IS_ENABLED(CONFIG_GRU_BASEBOARD_SCARLET))
+	if (!CONFIG(GRU_BASEBOARD_SCARLET))
 		return UNDEFINED_STRAPPING_ID;
 
 	static uint32_t sku_id = UNDEFINED_STRAPPING_ID;
diff --git a/src/mainboard/google/gru/bootblock.c b/src/mainboard/google/gru/bootblock.c
index 9a716aeaa9..7c18e12fd1 100644
--- a/src/mainboard/google/gru/bootblock.c
+++ b/src/mainboard/google/gru/bootblock.c
@@ -35,7 +35,7 @@ void bootblock_mainboard_early_init(void)
 	   so that we know we can use our GPIOs reliably in following code. */
 	write32(&rk3399_grf->io_vsel, RK_SETBITS(1 << 1 | 1 << 0));
 	/* On Scarlet-based boards, the 4C/4D domain is 1.8V (on others 3.0V) */
-	if (IS_ENABLED(CONFIG_GRU_BASEBOARD_SCARLET))
+	if (CONFIG(GRU_BASEBOARD_SCARLET))
 		write32(&rk3399_grf->io_vsel, RK_SETBITS(1 << 3));
 
 	/* Reconfigure GPIO1 from dynamic voltage selection through GPIO0_B1 to
@@ -46,10 +46,10 @@ void bootblock_mainboard_early_init(void)
 
 	/* Enable rails powering GPIO blocks, among other things. */
 	gpio_output(GPIO_P30V_EN, 1);
-	if (!IS_ENABLED(CONFIG_GRU_BASEBOARD_SCARLET))
+	if (!CONFIG(GRU_BASEBOARD_SCARLET))
 		gpio_output(GPIO_P15V_EN, 1);	/* Scarlet: EC-controlled */
 
-	if (IS_ENABLED(CONFIG_CONSOLE_SERIAL)) {
+	if (CONFIG(CONSOLE_SERIAL)) {
 		_Static_assert(CONFIG_CONSOLE_SERIAL_UART_ADDRESS == UART2_BASE,
 			       "CONSOLE_SERIAL_UART should be UART2");
 
@@ -89,10 +89,10 @@ static void configure_ec(void)
 
 static void configure_tpm(void)
 {
-	if (IS_ENABLED(CONFIG_GRU_HAS_TPM2)) {
+	if (CONFIG(GRU_HAS_TPM2)) {
 		rockchip_spi_init(CONFIG_DRIVER_TPM_SPI_BUS, 1500*KHz);
 
-		if (IS_ENABLED(CONFIG_GRU_BASEBOARD_SCARLET)) {
+		if (CONFIG(GRU_BASEBOARD_SCARLET)) {
 			gpio_input(GPIO(2, B, 1));	/* SPI2_MISO no-pull */
 			gpio_input(GPIO(2, B, 2));	/* SPI2_MOSI no-pull */
 			gpio_input(GPIO(2, B, 3));	/* SPI2_CLK no-pull */
diff --git a/src/mainboard/google/gru/chromeos.c b/src/mainboard/google/gru/chromeos.c
index 7fb47d0da8..a856e45089 100644
--- a/src/mainboard/google/gru/chromeos.c
+++ b/src/mainboard/google/gru/chromeos.c
@@ -21,7 +21,7 @@
 
 #include "board.h"
 
-static const uint32_t wp_polarity = IS_ENABLED(CONFIG_GRU_BASEBOARD_SCARLET) ?
+static const uint32_t wp_polarity = CONFIG(GRU_BASEBOARD_SCARLET) ?
 				    ACTIVE_LOW : ACTIVE_HIGH;
 
 int get_write_protect_state(void)
@@ -36,14 +36,14 @@ void fill_lb_gpios(struct lb_gpios *gpios)
 		{GPIO_WP.raw, wp_polarity, gpio_get(GPIO_WP),
 		 "write protect"},
 		{-1, ACTIVE_HIGH, get_recovery_mode_switch(), "recovery"},
-#if IS_ENABLED(CONFIG_GRU_BASEBOARD_SCARLET)
+#if CONFIG(GRU_BASEBOARD_SCARLET)
 		{GPIO_BACKLIGHT.raw, ACTIVE_HIGH, -1, "backlight"},
 #endif
 		{GPIO_EC_IN_RW.raw, ACTIVE_HIGH, -1, "EC in RW"},
 		{GPIO_EC_IRQ.raw, ACTIVE_LOW, -1, "EC interrupt"},
 		{GPIO_RESET.raw, ACTIVE_HIGH, -1, "reset"},
 		{GPIO_SPK_PA_EN.raw, ACTIVE_HIGH, -1, "speaker enable"},
-#if IS_ENABLED(CONFIG_GRU_HAS_TPM2)
+#if CONFIG(GRU_HAS_TPM2)
 		{GPIO_TPM_IRQ.raw, ACTIVE_HIGH, -1, "TPM interrupt"},
 #endif
 	};
@@ -53,7 +53,7 @@ void fill_lb_gpios(struct lb_gpios *gpios)
 
 void setup_chromeos_gpios(void)
 {
-	if (IS_ENABLED(CONFIG_GRU_BASEBOARD_SCARLET))
+	if (CONFIG(GRU_BASEBOARD_SCARLET))
 		gpio_input(GPIO_WP);
 	else
 		gpio_input_pullup(GPIO_WP);
@@ -61,7 +61,7 @@ void setup_chromeos_gpios(void)
 	gpio_input_pullup(GPIO_EC_IRQ);
 }
 
-#if IS_ENABLED(CONFIG_GRU_HAS_TPM2)
+#if CONFIG(GRU_HAS_TPM2)
 int tis_plat_irq_status(void)
 {
 	return gpio_irq_status(GPIO_TPM_IRQ);
diff --git a/src/mainboard/google/gru/mainboard.c b/src/mainboard/google/gru/mainboard.c
index d4fa7fc381..19f4ecca55 100644
--- a/src/mainboard/google/gru/mainboard.c
+++ b/src/mainboard/google/gru/mainboard.c
@@ -97,7 +97,7 @@ static void register_gpio_suspend(void)
 	 * 1.5V and 1.8V are EC-controlled on Scarlet derivatives,
 	 * so we skip them.
 	 */
-	if (!IS_ENABLED(CONFIG_GRU_BASEBOARD_SCARLET)) {
+	if (!CONFIG(GRU_BASEBOARD_SCARLET)) {
 		static struct bl31_gpio_param param_p15_en = {
 			.h = { .type = PARAM_SUSPEND_GPIO },
 			.gpio = { .polarity = BL31_GPIO_LEVEL_LOW },
@@ -164,7 +164,7 @@ static void configure_sdmmc(void)
 	gpio_output(GPIO(2, A, 2), 1);  /* SDMMC_SDIO_PWR_EN */
 
 	/* set SDMMC_DET_L pin */
-	if (IS_ENABLED(CONFIG_GRU_BASEBOARD_SCARLET))
+	if (CONFIG(GRU_BASEBOARD_SCARLET))
 		/*
 		 * do not have external pull up, so need to
 		 * set this pin internal pull up
@@ -178,7 +178,7 @@ static void configure_sdmmc(void)
 	 * In Scarlet derivatives, this GPIO set to high will get 3v,
 	 * With other board variants setting this GPIO low results in 3V.
 	 */
-	if (IS_ENABLED(CONFIG_GRU_BASEBOARD_SCARLET))
+	if (CONFIG(GRU_BASEBOARD_SCARLET))
 		gpio_output(GPIO(2, D, 4), 1);
 	else
 		gpio_output(GPIO(2, D, 4), 0);
@@ -226,7 +226,7 @@ static void configure_codec(void)
 	write32(&rk3399_grf->iomux_i2s0, IOMUX_I2S0_SD0);
 	write32(&rk3399_grf->iomux_i2sclk, IOMUX_I2SCLK);
 
-	if (!IS_ENABLED(CONFIG_GRU_BASEBOARD_SCARLET))
+	if (!CONFIG(GRU_BASEBOARD_SCARLET))
 		gpio_output(GPIO_P18V_AUDIO_PWREN, 1);
 	gpio_output(GPIO_SPK_PA_EN, 0);
 
@@ -239,7 +239,7 @@ static void configure_display(void)
 	 * Rainier is Scarlet-derived, but uses EDP so use board-specific
 	 * config rather than baseboard.
 	 */
-	if (IS_ENABLED(CONFIG_BOARD_GOOGLE_SCARLET)) {
+	if (CONFIG(BOARD_GOOGLE_SCARLET)) {
 		gpio_output(GPIO(4, D, 1), 0);	/* DISPLAY_RST_L */
 		gpio_output(GPIO(4, D, 3), 1);	/* PPVARP_LCD */
 		mdelay(10);
@@ -342,9 +342,9 @@ static void mainboard_init(struct device *dev)
 	if (display_init_required())
 		configure_display();
 	setup_usb(0);
-	if (IS_ENABLED(CONFIG_GRU_HAS_WLAN_RESET))
+	if (CONFIG(GRU_HAS_WLAN_RESET))
 		assert_wifi_reset();
-	if (!IS_ENABLED(CONFIG_GRU_BASEBOARD_SCARLET)) {
+	if (!CONFIG(GRU_BASEBOARD_SCARLET)) {
 		configure_touchpad();		/* Scarlet: works differently */
 		setup_usb(1);			/* Scarlet: only one USB port */
 	}
@@ -370,10 +370,10 @@ void mainboard_power_on_backlight(void)
 	gpio_output(GPIO_BL_EN, 1);  /* BL_EN */
 
 	/* Configure as output GPIO, to be toggled by payload. */
-	if (IS_ENABLED(CONFIG_GRU_BASEBOARD_SCARLET))
+	if (CONFIG(GRU_BASEBOARD_SCARLET))
 		gpio_output(GPIO_BACKLIGHT, 0);
 
-	if (IS_ENABLED(CONFIG_BOARD_GOOGLE_GRU))
+	if (CONFIG(BOARD_GOOGLE_GRU))
 		prepare_backlight_i2c();
 }
 
diff --git a/src/mainboard/google/gru/pwm_regulator.c b/src/mainboard/google/gru/pwm_regulator.c
index 0da6539643..6c64990794 100644
--- a/src/mainboard/google/gru/pwm_regulator.c
+++ b/src/mainboard/google/gru/pwm_regulator.c
@@ -58,12 +58,12 @@ int scarlet_pwm_design_voltage[][2] = {
 int pwm_enum_to_pwm_number[] = {
 	[PWM_REGULATOR_GPU] = 0,
 	[PWM_REGULATOR_LIT] = 2,
-#if IS_ENABLED(CONFIG_GRU_HAS_CENTERLOG_PWM)
+#if CONFIG(GRU_HAS_CENTERLOG_PWM)
 	[PWM_REGULATOR_CENTERLOG] = 3,
 #else
 	[PWM_REGULATOR_CENTERLOG] = -1,
 #endif
-#if IS_ENABLED(CONFIG_GRU_BASEBOARD_SCARLET)
+#if CONFIG(GRU_BASEBOARD_SCARLET)
 	[PWM_REGULATOR_BIG] = 3,
 #else
 	[PWM_REGULATOR_BIG] = 1,
@@ -78,14 +78,14 @@ void pwm_regulator_configure(enum pwm_regulator pwm, int millivolt)
 
 	voltage_min = pwm_design_voltage[pwm][0];
 	voltage_max = pwm_design_voltage[pwm][1];
-	if ((IS_ENABLED(CONFIG_BOARD_GOOGLE_KEVIN) && board_id() < 6) ||
-	    (IS_ENABLED(CONFIG_BOARD_GOOGLE_GRU) && board_id() < 2)) {
+	if ((CONFIG(BOARD_GOOGLE_KEVIN) && board_id() < 6) ||
+	    (CONFIG(BOARD_GOOGLE_GRU) && board_id() < 2)) {
 		voltage_min = PWM_DESIGN_VOLTAGE_MIN_OUTDATED;
 		voltage_max = PWM_DESIGN_VOLTAGE_MAX_OUTDATED;
-	} else if (IS_ENABLED(CONFIG_BOARD_GOOGLE_KEVIN) && board_id() >= 6) {
+	} else if (CONFIG(BOARD_GOOGLE_KEVIN) && board_id() >= 6) {
 		voltage_min = kevin6_pwm_design_voltage[pwm][0];
 		voltage_max = kevin6_pwm_design_voltage[pwm][1];
-	} else if (IS_ENABLED(CONFIG_GRU_BASEBOARD_SCARLET)) {
+	} else if (CONFIG(GRU_BASEBOARD_SCARLET)) {
 		voltage_min = scarlet_pwm_design_voltage[pwm][0];
 		voltage_max = scarlet_pwm_design_voltage[pwm][1];
 	}
diff --git a/src/mainboard/google/gru/romstage.c b/src/mainboard/google/gru/romstage.c
index 0b944febc5..57c716590b 100644
--- a/src/mainboard/google/gru/romstage.c
+++ b/src/mainboard/google/gru/romstage.c
@@ -35,9 +35,9 @@ static void init_dvs_outputs(void)
 	 * Kevin's logic rail has some ripple, so up the voltage a bit. Newer
 	 * boards use a fixed 900mV regulator for centerlogic.
 	 */
-	if (IS_ENABLED(CONFIG_BOARD_GOOGLE_KEVIN))
+	if (CONFIG(BOARD_GOOGLE_KEVIN))
 		pwm_regulator_configure(PWM_REGULATOR_CENTERLOG, 925);
-	else if (IS_ENABLED(CONFIG_GRU_HAS_CENTERLOG_PWM))
+	else if (CONFIG(GRU_HAS_CENTERLOG_PWM))
 		pwm_regulator_configure(PWM_REGULATOR_CENTERLOG, 900);
 
 	/* Allow time for the regulators to settle */
diff --git a/src/mainboard/google/gru/sdram_configs.c b/src/mainboard/google/gru/sdram_configs.c
index e67f0ec2f7..5e9e15f1df 100644
--- a/src/mainboard/google/gru/sdram_configs.c
+++ b/src/mainboard/google/gru/sdram_configs.c
@@ -51,7 +51,7 @@ enum dram_speeds {
 
 static enum dram_speeds get_sdram_target_mhz(void)
 {
-	if (IS_ENABLED(CONFIG_BOARD_GOOGLE_BOB) && board_id() < 4)
+	if (CONFIG(BOARD_GOOGLE_BOB) && board_id() < 4)
 		return dram_800MHz;
 
 	return dram_928MHz;