rockchip: gru: enable eDP display

This patch enables eDP display by:
o. setting HPD pinmux, backlight, vdd for eDP
o. setting vop mode
o. enabling VGA configs for edid

BRANCH=none
BUG=chrome-os-partner:51537
TEST=The dev screen is shown on kevin board

Change-Id: If8b07307454daa88727d317cc208d6c97de07ad7
Signed-off-by: Martin Roth <martinroth@google.com>
Original-Commit-Id: b1ad9337510f5437f691153dc68883edf273e4c7
Original-Change-Id: Id7006619b5be638b286a5402d892a5361ac1e430
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/340026
Original-Reviewed-by: Shunqian Zheng <zhengsq@rock-chips.com>
Reviewed-on: https://review.coreboot.org/14858
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>

1 files changed, 58 insertions, 0 deletions

diff --git a/src/mainboard/google/gru/mainboard.c b/src/mainboard/google/gru/mainboard.c
index 6824cbf546..0ccedd327e 100644
--- a/src/mainboard/google/gru/mainboard.c
+++ b/src/mainboard/google/gru/mainboard.c
@@ -15,11 +15,15 @@
  */
 
 #include <boardid.h>
+#include <delay.h>
 #include <device/device.h>
+#include <device/i2c.h>
 #include <gpio.h>
 #include <soc/clock.h>
+#include <soc/display.h>
 #include <soc/emmc.h>
 #include <soc/grf.h>
+#include <soc/i2c.h>
 
 static void configure_emmc(void)
 {
@@ -86,10 +90,64 @@ static void configure_sdmmc(void)
 	write32(&rk3399_grf->iomux_sdmmc, IOMUX_SDMMC);
 }
 
+static void configure_display(void)
+{
+	/* set pinmux for edp HPD*/
+	gpio_input_pulldown(GPIO(4, C, 7));
+	write32(&rk3399_grf->iomux_edp_hotplug, IOMUX_EDP_HOTPLUG);
+
+	gpio_output(GPIO(4, D, 3), 1); /* CPU3_EDP_VDDEN for P3.3V_DISP */
+}
+
 static void mainboard_init(device_t dev)
 {
 	configure_sdmmc();
 	configure_emmc();
+	configure_display();
+}
+
+static void enable_backlight_booster(void)
+{
+	const struct {
+		uint8_t reg;
+		uint8_t value;
+	} i2c_writes[] = {
+		{1, 0x84},
+		{1, 0x85},
+		{0, 0x26}
+	};
+	int i;
+	const int booster_i2c_port = 0;
+	uint8_t i2c_buf[2];
+	struct i2c_seg i2c_command = { .read = 0, .chip = 0x2c,
+				       .buf = i2c_buf, .len = sizeof(i2c_buf)
+	};
+
+	/*
+	 * This function is called on Gru right after BL_EN is asserted. It
+	 * takes time for the switcher chip to come online, let's wait a bit
+	 * to let the voltage settle, so that the chip can be accessed.
+	 */
+	udelay(1000);
+
+	/* Select pinmux for i2c0, which is the display backlight booster. */
+	write32(&rk3399_pmugrf->iomux_i2c0_sda, IOMUX_I2C0_SDA);
+	write32(&rk3399_pmugrf->iomux_i2c0_scl, IOMUX_I2C0_SCL);
+	i2c_init(0, 100*KHz);
+
+	for (i = 0; i < ARRAY_SIZE(i2c_writes); i++) {
+		i2c_buf[0] = i2c_writes[i].reg;
+		i2c_buf[1] = i2c_writes[i].value;
+		i2c_transfer(booster_i2c_port, &i2c_command, 1);
+	}
+}
+
+void mainboard_power_on_backlight(void)
+{
+	gpio_output(GPIO(1, C, 1), 1);  /* BL_EN */
+
+	if (IS_ENABLED(CONFIG_BOARD_GOOGLE_GRU))
+		enable_backlight_booster();
 }
 
 static void mainboard_enable(device_t dev)