google/gru: pass the gpio power supply enable pin to bl31

We need to disable some regulators when the device goes into suspend.
This means that we need to pass some gpios to bl31, and disable these
gpios when bl31 runs the suspend function.

BRANCH=None
BUG=chrome-os-partner:56423
TEST=enter suspend, measure suspend gpio go to low

[pg: also update arm-trusted-firmware to match]

Change-Id: Ia0835e16f7e65de6dd24a892241f0af542ec5b4b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 0f3332ef2136fd93f7faad579386ba5af003cf70
Original-Change-Id: I03d0407e0ef035823519a997534dcfea078a7ccd
Original-Signed-off-by: Lin Huang <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/374046
Original-Commit-Ready: Caesar Wang <wxt@rock-chips.com>
Original-Tested-by: Caesar Wang <wxt@rock-chips.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/16719
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>

1 files changed, 44 insertions, 0 deletions

diff --git a/src/mainboard/google/gru/mainboard.c b/src/mainboard/google/gru/mainboard.c
index 8359ca49dc..1812a2ab41 100644
--- a/src/mainboard/google/gru/mainboard.c
+++ b/src/mainboard/google/gru/mainboard.c
@@ -43,6 +43,49 @@ static void configure_emmc(void)
 	rkclk_configure_emmc();
 }
 
+static void register_gpio_suspend(void)
+{
+	/*
+	 * These three GPIO params are used to shut down the 1.5V, 1.8V and
+	 * 3.3V power rails, which need to be shut down ordered by voltage,
+	 * with highest voltage first.
+	 * Since register_bl31() appends to the front of the list, we need to
+	 * register them backwards, with 1.5V coming first.
+	 */
+	static struct bl31_gpio_param param_p15_en = {
+		.h = {
+			.type = PARAM_SUSPEND_GPIO,
+		},
+		.gpio = {
+			.polarity = BL31_GPIO_LEVEL_LOW,
+		},
+	};
+	param_p15_en.gpio.index = GET_GPIO_NUM(GPIO_P15V_EN);
+	register_bl31_param(&param_p15_en.h);
+
+	static struct bl31_gpio_param param_p18_audio_en = {
+		.h = {
+			.type = PARAM_SUSPEND_GPIO,
+		},
+		.gpio = {
+			.polarity = BL31_GPIO_LEVEL_LOW,
+		},
+	};
+	param_p18_audio_en.gpio.index = GET_GPIO_NUM(GPIO_P18V_AUDIO_PWREN);
+	register_bl31_param(&param_p18_audio_en.h);
+
+	static struct bl31_gpio_param param_p30_en = {
+		.h = {
+			.type = PARAM_SUSPEND_GPIO,
+		},
+		.gpio = {
+			.polarity = BL31_GPIO_LEVEL_LOW,
+		},
+	};
+	param_p30_en.gpio.index = GET_GPIO_NUM(GPIO_P30V_EN);
+	register_bl31_param(&param_p30_en.h);
+}
+
 static void register_reset_to_bl31(void)
 {
 	static struct bl31_gpio_param param_reset = {
@@ -184,6 +227,7 @@ static void mainboard_init(device_t dev)
 	setup_usb();
 	register_reset_to_bl31();
 	register_poweroff_to_bl31();
+	register_gpio_suspend();
 }
 
 static void enable_backlight_booster(void)