mb/google/deltaur: add deltaur mainboard initial support

Created a new Google baseboard using Tiger Lake named deltaur, taking
volteer as a starting point.

BUG=b:151102807
TEST=make build successful

Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Change-Id: Ib98f328df22f39e7d9d625a3292954881ee15b15
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39502
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>

1 files changed, 117 insertions, 0 deletions

diff --git a/src/mainboard/google/deltaur/chromeos.c b/src/mainboard/google/deltaur/chromeos.c
new file mode 100644
index 0000000000..128378828a
--- /dev/null
+++ b/src/mainboard/google/deltaur/chromeos.c
@@ -0,0 +1,117 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#include <arch/acpi.h>
+#include <baseboard/variants.h>
+#include <boot/coreboot_tables.h>
+#include <gpio.h>
+#include <soc/gpio.h>
+#include <variant/gpio.h>
+#include <vendorcode/google/chromeos/chromeos.h>
+#include <security/tpm/tss.h>
+#include <device/device.h>
+#include <intelblocks/pmclib.h>
+#include <soc/pmc.h>
+#include <soc/pci_devs.h>
+
+
+enum rec_mode_state {
+	REC_MODE_UNINITIALIZED,
+	REC_MODE_NOT_REQUESTED,
+	REC_MODE_REQUESTED,
+};
+
+void fill_lb_gpios(struct lb_gpios *gpios)
+{
+	struct lb_gpio chromeos_gpios[] = {
+		{-1, ACTIVE_HIGH, get_lid_switch(), "lid"},
+		{-1, ACTIVE_HIGH, 0, "power"},
+		{-1, ACTIVE_HIGH, gfx_get_init_done(), "oprom"},
+		{-1, ACTIVE_HIGH, 0, "EC in RW"},
+	};
+	lb_add_gpios(gpios, chromeos_gpios, ARRAY_SIZE(chromeos_gpios));
+}
+
+static int cros_get_gpio_value(int type)
+{
+	const struct cros_gpio *cros_gpios;
+	size_t i, num_gpios = 0;
+
+	cros_gpios = variant_cros_gpios(&num_gpios);
+
+	for (i = 0; i < num_gpios; i++) {
+		const struct cros_gpio *gpio = &cros_gpios[i];
+		if (gpio->type == type) {
+			int state = gpio_get(gpio->gpio_num);
+			if (gpio->polarity == CROS_GPIO_ACTIVE_LOW)
+				return !state;
+			else
+				return state;
+		}
+	}
+	return 0;
+}
+
+void mainboard_chromeos_acpi_generate(void)
+{
+	const struct cros_gpio *cros_gpios;
+	size_t num_gpios = 0;
+
+	cros_gpios = variant_cros_gpios(&num_gpios);
+
+	chromeos_acpi_gpio_generate(cros_gpios, num_gpios);
+}
+
+int get_write_protect_state(void)
+{
+	return cros_get_gpio_value(CROS_GPIO_WP);
+}
+
+int get_recovery_mode_switch(void)
+{
+	static enum rec_mode_state saved_rec_mode = REC_MODE_UNINITIALIZED;
+	enum rec_mode_state state = REC_MODE_NOT_REQUESTED;
+	uint8_t cr50_state = 0;
+
+	/* Check cached state, since TPM will only tell us the first time */
+	if (saved_rec_mode != REC_MODE_UNINITIALIZED)
+		return saved_rec_mode == REC_MODE_REQUESTED;
+
+	/*
+	 * Read one-time recovery request from cr50 in verstage only since
+	 * the TPM driver won't be set up in time for other stages like romstage
+	 * and the value from the TPM would be wrong anyway since the verstage
+	 * read would have cleared the value on the TPM.
+	 *
+	 * The TPM recovery request is passed between stages through vboot data
+	 * or cbmem depending on stage.
+	 */
+	if (ENV_VERSTAGE &&
+	    tlcl_cr50_get_recovery_button(&cr50_state) == TPM_SUCCESS &&
+	    cr50_state)
+		state = REC_MODE_REQUESTED;
+
+	/* Read state from the GPIO controlled by servo. */
+	if (cros_get_gpio_value(CROS_GPIO_REC))
+		state = REC_MODE_REQUESTED;
+
+	/* Store the state in case this is called again in verstage. */
+	saved_rec_mode = state;
+
+	return state == REC_MODE_REQUESTED;
+}
+
+int get_lid_switch(void)
+{
+	return 1;
+}
+
+void mainboard_prepare_cr50_reset(void)
+{
+	/* Ensure system powers up after CR50 reset */
+	if (ENV_RAMSTAGE)
+		pmc_soc_set_afterg3_en(true);
+}