mb/google/dedede: add haboki variant

haboki/habokay is the same design as drawlat/drawcia, and differs only
 in replacing Cr50 with discrete TPM.

BUG=b:187094464
TEST=FW_NAME=haboki emerge-keeby coreboot

Cq-Depend: chrome-internal:3850094
Change-Id: Id866927b7041c5bf1c73fb4f0c03798eb61efa79
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54755
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>

11 files changed, 385 insertions, 0 deletions

diff --git a/src/mainboard/google/dedede/Kconfig b/src/mainboard/google/dedede/Kconfig
index e237b80cc7..e1bc9ad789 100644
--- a/src/mainboard/google/dedede/Kconfig
+++ b/src/mainboard/google/dedede/Kconfig
@@ -110,6 +110,7 @@ config MAINBOARD_PART_NUMBER
 	default "Blipper" if BOARD_GOOGLE_BLIPPER
 	default "Cret" if BOARD_GOOGLE_CRET
 	default "Pirika" if BOARD_GOOGLE_PIRIKA
+	default "Haboki" if BOARD_GOOGLE_HABOKI
 
 config MAX_CPUS
 	int
@@ -146,6 +147,7 @@ config VARIANT_DIR
 	default "blipper" if BOARD_GOOGLE_BLIPPER
 	default "cret" if BOARD_GOOGLE_CRET
 	default "pirika" if BOARD_GOOGLE_PIRIKA
+	default "haboki" if BOARD_GOOGLE_HABOKI
 
 endif #BOARD_GOOGLE_BASEBOARD_DEDEDE
 
diff --git a/src/mainboard/google/dedede/Kconfig.name b/src/mainboard/google/dedede/Kconfig.name
index e0ead8ca71..3f2c5224c7 100644
--- a/src/mainboard/google/dedede/Kconfig.name
+++ b/src/mainboard/google/dedede/Kconfig.name
@@ -34,6 +34,15 @@ config BOARD_GOOGLE_DRAWCIA_LEGACY
 	select DRIVERS_INTEL_MIPI_CAMERA
 	select SOC_INTEL_COMMON_BLOCK_IPU
 
+config BOARD_GOOGLE_HABOKI
+	bool "-> HABOKI"
+	select BOARD_GOOGLE_BASEBOARD_DEDEDE_TPM2
+	select BASEBOARD_DEDEDE_LAPTOP
+	select DRIVERS_GENERIC_MAX98357A
+	select GEO_SAR_ENABLE if CHROMEOS_WIFI_SAR
+	select DRIVERS_INTEL_MIPI_CAMERA
+	select SOC_INTEL_COMMON_BLOCK_IPU
+
 config BOARD_GOOGLE_MADOO
 	bool "-> Madoo"
 	select BOARD_GOOGLE_BASEBOARD_DEDEDE_CR50
diff --git a/src/mainboard/google/dedede/variants/haboki/Makefile.inc b/src/mainboard/google/dedede/variants/haboki/Makefile.inc
new file mode 100644
index 0000000000..04eb9a4877
--- /dev/null
+++ b/src/mainboard/google/dedede/variants/haboki/Makefile.inc
@@ -0,0 +1,4 @@
+## SPDX-License-Identifier: GPL-2.0-or-later
+
+ramstage-y += gpio.c
+ramstage-$(CONFIG_FW_CONFIG) += variant.c
diff --git a/src/mainboard/google/dedede/variants/haboki/gpio.c b/src/mainboard/google/dedede/variants/haboki/gpio.c
new file mode 100644
index 0000000000..03b9a45d7e
--- /dev/null
+++ b/src/mainboard/google/dedede/variants/haboki/gpio.c
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+#include <baseboard/gpio.h>
+#include <baseboard/variants.h>
+#include <boardid.h>
+#include <fw_config.h>
+#include <ec/google/chromeec/ec.h>
+
+/* Pad configuration in ramstage*/
+static const struct pad_config gpio_table[] = {
+	/* C12 : AP_PEN_DET_ODL has an external pull-up and hence no pad termination.*/
+	PAD_CFG_GPI_GPIO_DRIVER(GPP_C12, NONE, DEEP),
+};
+
+const struct pad_config *variant_override_gpio_table(size_t *num)
+{
+	*num = ARRAY_SIZE(gpio_table);
+	return gpio_table;
+}
diff --git a/src/mainboard/google/dedede/variants/haboki/include/variant/ec.h b/src/mainboard/google/dedede/variants/haboki/include/variant/ec.h
new file mode 100644
index 0000000000..27c930d4f2
--- /dev/null
+++ b/src/mainboard/google/dedede/variants/haboki/include/variant/ec.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+#ifndef MAINBOARD_EC_H
+#define MAINBOARD_EC_H
+
+#include <baseboard/ec.h>
+
+/* Enable Keyboard Backlight in ACPI */
+#define EC_ENABLE_KEYBOARD_BACKLIGHT
+
+#endif
diff --git a/src/mainboard/google/dedede/variants/haboki/include/variant/gpio.h b/src/mainboard/google/dedede/variants/haboki/include/variant/gpio.h
new file mode 100644
index 0000000000..9078664608
--- /dev/null
+++ b/src/mainboard/google/dedede/variants/haboki/include/variant/gpio.h
@@ -0,0 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+#ifndef MAINBOARD_GPIO_H
+#define MAINBOARD_GPIO_H
+
+#include <baseboard/gpio.h>
+
+#endif /* MAINBOARD_GPIO_H */
diff --git a/src/mainboard/google/dedede/variants/haboki/memory/Makefile.inc b/src/mainboard/google/dedede/variants/haboki/memory/Makefile.inc
new file mode 100644
index 0000000000..f6282bf04c
--- /dev/null
+++ b/src/mainboard/google/dedede/variants/haboki/memory/Makefile.inc
@@ -0,0 +1,5 @@
+## SPDX-License-Identifier: GPL-2.0-or-later
+## This is an auto-generated file. Do not edit!!
+
+SPD_SOURCES =
+SPD_SOURCES += lp4x-spd-1.hex      # ID = 0(0b0000)  Parts = MT53E512M32D2NP-046 WT:E, H9HCNNNBKMMLXR-NEE, K4U6E3S4AA-MGCR
diff --git a/src/mainboard/google/dedede/variants/haboki/memory/dram_id.generated.txt b/src/mainboard/google/dedede/variants/haboki/memory/dram_id.generated.txt
new file mode 100644
index 0000000000..856d016914
--- /dev/null
+++ b/src/mainboard/google/dedede/variants/haboki/memory/dram_id.generated.txt
@@ -0,0 +1,4 @@
+DRAM Part Name                 ID to assign
+MT53E512M32D2NP-046 WT:E       0 (0000)
+H9HCNNNBKMMLXR-NEE             0 (0000)
+K4U6E3S4AA-MGCR                0 (0000)
diff --git a/src/mainboard/google/dedede/variants/haboki/memory/mem_list_variant.txt b/src/mainboard/google/dedede/variants/haboki/memory/mem_list_variant.txt
new file mode 100644
index 0000000000..26c06b6f40
--- /dev/null
+++ b/src/mainboard/google/dedede/variants/haboki/memory/mem_list_variant.txt
@@ -0,0 +1,3 @@
+MT53E512M32D2NP-046 WT:E
+H9HCNNNBKMMLXR-NEE
+K4U6E3S4AA-MGCR
diff --git a/src/mainboard/google/dedede/variants/haboki/overridetree.cb b/src/mainboard/google/dedede/variants/haboki/overridetree.cb
new file mode 100644
index 0000000000..aebfdcd29c
--- /dev/null
+++ b/src/mainboard/google/dedede/variants/haboki/overridetree.cb
@@ -0,0 +1,307 @@
+chip soc/intel/jasperlake
+
+	# USB Port Configuration
+	register "usb2_ports[5]" = "USB2_PORT_MID(OC_SKIP)"     # Camera
+
+	# Intel Common SoC Config
+	#+-------------------+---------------------------+
+	#| Field             |  Value                    |
+	#+-------------------+---------------------------+
+	#| GSPI0             | cr50 TPM. Early init is   |
+	#|                   | required to set up a BAR  |
+	#|                   | for TPM communication     |
+	#|                   | before memory is up       |
+	#| I2C0              | Trackpad                  |
+	#| I2C1              | Digitizer                 |
+	#| I2C2              | Touchscreen               |
+	#| I2C3              | Camera                    |
+	#| I2C4              | Audio                     |
+	#+-------------------+---------------------------+
+	register "common_soc_config" = "{
+		.gspi[0] = {
+			.speed_mhz = 1,
+			.early_init = 1,
+		},
+		.i2c[0] = {
+			.speed = I2C_SPEED_FAST,
+		},
+		.i2c[1] = {
+			.speed = I2C_SPEED_FAST,
+		},
+		.i2c[2] = {
+			.speed = I2C_SPEED_FAST,
+		},
+		.i2c[3] = {
+			.speed = I2C_SPEED_FAST,
+		},
+		.i2c[4] = {
+			.speed = I2C_SPEED_FAST,
+		},
+	}"
+
+	register "power_limits_config" = "{
+		.tdp_pl1_override = 6,
+		.tdp_pl2_override = 20,
+	}"
+
+	register "tcc_offset" = "20"	# TCC of 85C
+
+	# Enable Acoustic noise mitigation and set slew rate to 1/4
+        # Rest of the parameters are 0 by default.
+	register "AcousticNoiseMitigation" = "1"
+	register "SlowSlewRate" = "SlewRateFastBy4"
+	register "FastPkgCRampDisable" = "1"
+
+	device domain 0 on
+		device pci 05.0 on # IPU - MIPI Camera
+			chip drivers/intel/mipi_camera
+				register "acpi_uid" = "0x50000"
+				register "acpi_name" = ""IPU0""
+				register "device_type" = "INTEL_ACPI_CAMERA_CIO2"
+
+				register "cio2_num_ports" = "2"
+				register "cio2_lanes_used" = "{1,4}"
+				register "cio2_lane_endpoint[1]" = ""^I2C3.CAM1""
+				register "cio2_prt[0]" = "0"
+				register "cio2_prt[1]" = "2"
+				device generic 0 on end
+			end
+		end
+
+		device pci 04.0 on
+			chip drivers/intel/dptf
+				# Default DPTF Policy for all drawcia boards if not overridden
+				register "options.tsr[0].desc" = ""Memory""
+				register "options.tsr[1].desc" = ""Ambient""
+				register "options.tsr[2].desc" = ""Charger""
+				register "options.tsr[3].desc" = ""5V regulator""
+
+				## Passive Policy
+				register "policies.passive" = "{
+					[0] = DPTF_PASSIVE(CPU,		CPU,	       80, 1000),
+					[1] = DPTF_PASSIVE(CPU,		TEMP_SENSOR_0, 70, 4000),
+					[2] = DPTF_PASSIVE(CPU,		TEMP_SENSOR_1, 51, 1000),
+					[3] = DPTF_PASSIVE(CHARGER,	TEMP_SENSOR_2, 75, 5000),
+					[4] = DPTF_PASSIVE(CPU,		TEMP_SENSOR_3, 60, 1000)
+				}"
+
+				## Critical Policy
+				register "policies.critical" = "{
+					[0] = DPTF_CRITICAL(CPU,           119, SHUTDOWN),
+					[1] = DPTF_CRITICAL(TEMP_SENSOR_0, 115, SHUTDOWN),
+					[2] = DPTF_CRITICAL(TEMP_SENSOR_1, 115, SHUTDOWN),
+					[3] = DPTF_CRITICAL(TEMP_SENSOR_2, 115, SHUTDOWN),
+					[4] = DPTF_CRITICAL(TEMP_SENSOR_3, 115, SHUTDOWN)
+				}"
+
+				register "controls.power_limits" = "{
+					.pl1 = {
+						.min_power = 3800,
+						.max_power = 5800,
+						.time_window_min = 1 * MSECS_PER_SEC,
+						.time_window_max = 1 * MSECS_PER_SEC,
+						.granularity = 200,
+					},
+					.pl2 = {
+						.min_power = 20000,
+						.max_power = 20000,
+						.time_window_min = 1 * MSECS_PER_SEC,
+						.time_window_max = 1 * MSECS_PER_SEC,
+						.granularity = 1000,
+					}
+				}"
+
+				## Charger Performance Control (Control, mA)
+				register "controls.charger_perf" = "{
+					[0] = { 255, 3000 },
+					[1] = {  24, 1500 },
+					[2] = {  16, 1000 },
+					[3] = {   8,  500 }
+				}"
+
+				device generic 0 on end
+			end
+		end # SA Thermal device
+		device pci 14.0 on
+			chip drivers/usb/acpi
+				device usb 0.0 on
+					chip drivers/usb/acpi
+						register "desc" = ""Camera""
+						register "type" = "UPC_TYPE_INTERNAL"
+						device usb 2.5 on end
+					end
+				end
+			end
+		end # USB xHCI
+		device pci 15.0 on
+			chip drivers/i2c/generic
+				register "hid" = ""ELAN0000""
+				register "desc" = ""ELAN Touchpad""
+				register "irq" = "ACPI_IRQ_WAKE_EDGE_LOW(GPP_B3_IRQ)"
+				register "wake" = "GPE0_DW0_03"
+				register "probed" = "1"
+				device i2c 15 on end
+			end
+		end #I2C 0
+		device pci 15.2 on
+                        chip drivers/generic/gpio_keys
+				register "name" = ""PENH""
+				register "gpio" = "ACPI_GPIO_INPUT_ACTIVE_LOW(GPP_C12)"
+				register "key.wakeup_route" = "WAKEUP_ROUTE_GPIO_IRQ"
+				register "key.wakeup_event_action" = "EV_ACT_DEASSERTED"
+				register "key.dev_name" = ""EJCT""
+				register "key.linux_code" = "SW_PEN_INSERTED"
+				register "key.linux_input_type" = "EV_SW"
+				register "key.label" = ""pen_eject""
+				device generic 0 on end
+			end
+			chip drivers/i2c/generic
+				register "hid" = ""ELAN0001""
+				register "desc" = ""ELAN Touchscreen""
+				register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_D4_IRQ)"
+				register "probed" = "1"
+				register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D5)"
+				register "reset_delay_ms" = "20"
+				register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D6)"
+				register "enable_delay_ms" = "1"
+				register "has_power_resource" = "1"
+				device i2c 10 on end
+			end
+			chip drivers/i2c/hid
+				register "generic.hid" = ""GTCH7503""
+				register "generic.desc" = ""G2TOUCH Touchscreen""
+				register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_D4_IRQ)"
+				register "generic.probed" = "1"
+				register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D5)"
+				register "generic.reset_delay_ms" = "50"
+				register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D6)"
+				register "generic.enable_delay_ms" = "1"
+				register "generic.has_power_resource" = "1"
+				register "generic.disable_gpio_export_in_crs" = "1"
+				register "hid_desc_reg_offset" = "0x01"
+				device i2c 40 on end
+			end
+			chip drivers/i2c/hid
+				register "generic.hid" = ""GDIX0000""
+				register "generic.desc" = ""Goodix Touchscreen""
+				register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_D4_IRQ)"
+				register "generic.probed" = "1"
+				register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D5)"
+				register "generic.reset_delay_ms" = "120"
+				register "generic.reset_off_delay_ms" = "2"
+				register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D6)"
+				register "generic.enable_delay_ms" = "12"
+				register "generic.has_power_resource" = "1"
+				register "hid_desc_reg_offset" = "0x01"
+				device i2c 0x5d on end
+			end
+			chip drivers/i2c/hid
+				register "generic.hid" = ""ELAN2513""
+				register "generic.desc" = ""ELAN Touchscreen""
+				register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_D4_IRQ)"
+				register "generic.probed" = "1"
+				register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D5)"
+				register "generic.reset_delay_ms" = "20"
+				register "generic.reset_off_delay_ms" = "2"
+				register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D6)"
+				register "generic.enable_delay_ms" = "10"
+				register "generic.stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_A11)"
+				register "generic.stop_delay_ms" = "130"
+				register "generic.has_power_resource" = "1"
+				register "hid_desc_reg_offset" = "0x01"
+				device i2c 15 on end
+			end
+		end # I2C 2
+		device pci 15.3 on
+			chip drivers/intel/mipi_camera
+				register "acpi_hid" = ""OVTI8856""
+				register "acpi_uid" = "0"
+				register "acpi_name" = ""CAM1""
+				register "chip_name" = ""Ov 8856 Camera""
+				register "device_type" = "INTEL_ACPI_CAMERA_SENSOR"
+
+				register "ssdb.lanes_used" = "4"
+				register "ssdb.link_used" = "1"
+				register "ssdb.vcm_type" = "0x0C"
+				register "vcm_name" = ""VCM0""
+				register "num_freq_entries" = "2"
+				register "link_freq[0]" = "360000000"
+				register "link_freq[1]" = "180000000"
+				register "remote_name" = ""IPU0""
+
+				register "has_power_resource" = "1"
+				#Controls
+				register "clk_panel.clks[0].clknum" = "1" #IMGCLKOUT_1
+				register "clk_panel.clks[0].freq" = "1" #19.2 Mhz
+
+				register "gpio_panel.gpio[0].gpio_num" = "GPP_D13" #power_enable_2p8
+				register "gpio_panel.gpio[1].gpio_num" = "GPP_D14" #power_enable_1p2
+				register "gpio_panel.gpio[2].gpio_num" = "GPP_D12" #reset
+
+				#_ON
+				register "on_seq.ops_cnt" = "5"
+				register "on_seq.ops[0]" = "SEQ_OPS_CLK_ENABLE(0, 0)"
+				register "on_seq.ops[1]" = "SEQ_OPS_GPIO_ENABLE(0, 5)"
+				register "on_seq.ops[2]" = "SEQ_OPS_GPIO_ENABLE(1, 5)"
+				register "on_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(2, 5)"
+				register "on_seq.ops[4]" = "SEQ_OPS_GPIO_ENABLE(2, 5)"
+
+				#_OFF
+				register "off_seq.ops_cnt" = "4"
+				register "off_seq.ops[0]" = "SEQ_OPS_CLK_DISABLE(0, 0)"
+				register "off_seq.ops[1]" = "SEQ_OPS_GPIO_DISABLE(2, 0)"
+				register "off_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(1, 0)"
+				register "off_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(0, 0)"
+
+				device i2c 36 on end
+			end
+			chip drivers/intel/mipi_camera
+				register "acpi_hid" = "ACPI_DT_NAMESPACE_HID"
+				register "acpi_uid" = "3"
+				register "acpi_name" = ""VCM0""
+				register "chip_name" = ""DW AF DAC""
+				register "device_type" = "INTEL_ACPI_CAMERA_VCM"
+
+				register "pr0" = ""\\_SB.PCI0.I2C3.CAM1.PRIC""
+				register "vcm_compat" = ""dongwoon,dw9714""
+
+				device i2c 0C on end
+			end
+			chip drivers/intel/mipi_camera
+				register "acpi_uid" = "1"
+				register "acpi_name" = ""NVM0""
+				register "chip_name" = ""GT24C08""
+				register "device_type" = "INTEL_ACPI_CAMERA_NVM"
+
+				register "nvm_size" = "0x0400"
+				register "nvm_pagesize" = "1"
+				register "nvm_readonly" = "1"
+				register "nvm_width" = "0x08"
+				register "nvm_compat" = ""atmel,24c08""
+
+				device i2c 50 on end
+			end
+		end # I2C 3
+		device pci 19.0 on
+			chip drivers/i2c/generic
+				register "hid" = ""10EC5682""
+				register "name" = ""RT58""
+				register "desc" = ""Headset Codec""
+				register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_D16)"
+				# Set the jd_src to RT5668_JD1 for jack detection
+				register "property_count" = "1"
+				register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER"
+				register "property_list[0].name" = ""realtek,jd-src""
+				register "property_list[0].integer" = "1"
+				device i2c 1a on end
+			end
+		end #I2C 4
+		device pci 1f.3 on
+			chip drivers/generic/max98357a
+				register "hid" = ""MX98360A""
+				register "sdmode_gpio" =  "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D17)"
+				device generic 0 on end
+			end
+		end # Intel HDA
+	end
+end
diff --git a/src/mainboard/google/dedede/variants/haboki/variant.c b/src/mainboard/google/dedede/variants/haboki/variant.c
new file mode 100644
index 0000000000..8f321837f6
--- /dev/null
+++ b/src/mainboard/google/dedede/variants/haboki/variant.c
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <drivers/intel/gma/opregion.h>
+#include <fw_config.h>
+#include <sar.h>
+
+const char *get_wifi_sar_cbfs_filename(void)
+{
+	if (fw_config_probe(FW_CONFIG(TABLETMODE, TABLETMODE_ENABLED)))
+		return "wifi_sar-habokay.hex";
+
+	return WIFI_SAR_CBFS_DEFAULT_FILENAME;
+}