soc/mediatek: move MSDC drivers to soc folder

Setting of MSDC is defined by soc, so we move them to soc folder.

TEST=emerge-cherry coreboot; emerge-asurada coreboot

Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I84ad8a4cde120c97024870ebf750d44b36c2284d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59339
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>

1 files changed, 2 insertions, 102 deletions

diff --git a/src/mainboard/google/cherry/mainboard.c b/src/mainboard/google/cherry/mainboard.c
index a09705019e..92d8ee1dbe 100644
--- a/src/mainboard/google/cherry/mainboard.c
+++ b/src/mainboard/google/cherry/mainboard.c
@@ -15,9 +15,7 @@
 #include <soc/gpio.h>
 #include <soc/i2c.h>
 #include <soc/msdc.h>
-#include <soc/mt6360.h>
 #include <soc/mtcmos.h>
-#include <soc/regulator.h>
 #include <soc/spm.h>
 #include <soc/usb.h>
 
@@ -31,28 +29,6 @@
 #define GPIO_EDP_HPD_1V8 GPIO(GPIO_07)
 #define GPIO_EN_PP3300_DISP_X GPIO(I2SO1_D2)
 
-DEFINE_BITFIELD(MSDC0_DRV, 29, 0)
-DEFINE_BITFIELD(MSDC1_DRV, 17, 0)
-DEFINE_BITFIELD(MSDC1_GPIO_MODE0_0, 26, 24)
-DEFINE_BITFIELD(MSDC1_GPIO_MODE0_1, 30, 28)
-DEFINE_BITFIELD(MSDC1_GPIO_MODE1_0, 2, 0)
-DEFINE_BITFIELD(MSDC1_GPIO_MODE1_1, 6, 4)
-DEFINE_BITFIELD(MSDC1_GPIO_MODE1_2, 10, 8)
-DEFINE_BITFIELD(MSDC1_GPIO_MODE1_3, 14, 12)
-
-#define MSDC0_BASE	0x11230000
-#define MSDC0_TOP_BASE	0x11f50000
-
-#define MSDC0_DRV_VALUE	0x1b6db6db
-#define MSDC1_DRV_VALUE	0x1b6db
-#define MSDC1_GPIO_MODE0_VALUE	0x1
-#define MSDC1_GPIO_MODE1_VALUE	0x1
-
-enum {
-	MSDC1_GPIO_MODE0_BASE = 0x100053d0,
-	MSDC1_GPIO_MODE1_BASE = 0x100053e0,
-};
-
 static void register_reset_to_bl31(void)
 {
 	static struct bl_aux_param_gpio param_reset = {
@@ -64,82 +40,6 @@ static void register_reset_to_bl31(void)
 	register_bl31_aux_param(&param_reset.h);
 }
 
-static void configure_emmc(void)
-{
-	void *gpio_base = (void *)IOCFG_TL_BASE;
-	int i;
-
-	const gpio_t emmc_pu_pin[] = {
-		GPIO(EMMC_DAT0), GPIO(EMMC_DAT1),
-		GPIO(EMMC_DAT2), GPIO(EMMC_DAT3),
-		GPIO(EMMC_DAT4), GPIO(EMMC_DAT5),
-		GPIO(EMMC_DAT6), GPIO(EMMC_DAT7),
-		GPIO(EMMC_CMD), GPIO(EMMC_RSTB),
-	};
-
-	const gpio_t emmc_pd_pin[] = {
-		GPIO(EMMC_DSL), GPIO(EMMC_CLK),
-	};
-
-	for (i = 0; i < ARRAY_SIZE(emmc_pu_pin); i++)
-		gpio_set_pull(emmc_pu_pin[i], GPIO_PULL_ENABLE, GPIO_PULL_UP);
-
-	for (i = 0; i < ARRAY_SIZE(emmc_pd_pin); i++)
-		gpio_set_pull(emmc_pd_pin[i], GPIO_PULL_ENABLE, GPIO_PULL_DOWN);
-
-	/* set eMMC cmd/dat/clk/ds/rstb pins driving to 8mA */
-	SET32_BITFIELDS(gpio_base, MSDC0_DRV, MSDC0_DRV_VALUE);
-
-	mtk_emmc_early_init((void *)MSDC0_BASE, (void *)MSDC0_TOP_BASE);
-}
-
-static void configure_sdcard(void)
-{
-	void *gpio_base = (void *)IOCFG_RB_BASE;
-	void *gpio_mode0_base = (void *)MSDC1_GPIO_MODE0_BASE;
-	void *gpio_mode1_base = (void *)MSDC1_GPIO_MODE1_BASE;
-	int i;
-
-	const gpio_t sdcard_pu_pin[] = {
-		GPIO(MSDC1_DAT0), GPIO(MSDC1_DAT1),
-		GPIO(MSDC1_DAT2), GPIO(MSDC1_DAT3),
-		GPIO(MSDC1_CMD),
-	};
-
-	const gpio_t sdcard_pd_pin[] = {
-		GPIO(MSDC1_CLK),
-	};
-
-	for (i = 0; i < ARRAY_SIZE(sdcard_pu_pin); i++)
-		gpio_set_pull(sdcard_pu_pin[i], GPIO_PULL_ENABLE, GPIO_PULL_UP);
-
-	for (i = 0; i < ARRAY_SIZE(sdcard_pd_pin); i++)
-		gpio_set_pull(sdcard_pd_pin[i], GPIO_PULL_ENABLE, GPIO_PULL_DOWN);
-
-	/* set sdcard cmd/dat/clk pins driving to 8mA */
-	SET32_BITFIELDS(gpio_base, MSDC1_DRV, MSDC1_DRV_VALUE);
-
-	/* set sdcard dat2/dat0/dat3/cmd/clk pins to msdc1 mode */
-	SET32_BITFIELDS(gpio_mode0_base,
-			MSDC1_GPIO_MODE0_0, MSDC1_GPIO_MODE0_VALUE,
-			MSDC1_GPIO_MODE0_1, MSDC1_GPIO_MODE0_VALUE);
-
-	/* set sdcard dat1 pin to msdc1 mode */
-	SET32_BITFIELDS(gpio_mode1_base,
-			MSDC1_GPIO_MODE1_0, MSDC1_GPIO_MODE1_VALUE,
-			MSDC1_GPIO_MODE1_1, MSDC1_GPIO_MODE1_VALUE,
-			MSDC1_GPIO_MODE1_2, MSDC1_GPIO_MODE1_VALUE,
-			MSDC1_GPIO_MODE1_3, MSDC1_GPIO_MODE1_VALUE);
-
-	mtk_i2c_bus_init(I2C7, I2C_SPEED_FAST);
-
-	if (CONFIG(BOARD_GOOGLE_CHERRY))
-		mt6360_init(I2C7);
-
-	mainboard_enable_regulator(MTK_REGULATOR_VCCQ, 1);
-	mainboard_enable_regulator(MTK_REGULATOR_VCC, 1);
-}
-
 /* Set up backlight control pins as output pin and power-off by default */
 static void configure_panel_backlight(void)
 {
@@ -199,8 +99,8 @@ static void mainboard_init(struct device *dev)
 	else
 		printk(BIOS_INFO, "%s: Skipped display initialization\n", __func__);
 
-	configure_emmc();
-	configure_sdcard();
+	mtk_msdc_configure_emmc(true);
+	mtk_msdc_configure_sdcard();
 	setup_usb_host();
 
 	/* for audio usage */