Add support for "Butterfly" Chromebook

We're happy to announce coreboot support for the "Butterfly"
Chromebook, a.k.a HP Pavilion Chromebook.

More information at:
http://www.google.com/intl/en/chrome/devices/hp-pavilion-chromebook.html

This commit also includes support for the ENE KB3940Q embedded controller
running on Quanta's firmware.

Change-Id: I194f847a94005218ec04eeba091c3257ac459510
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/2359
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins)

1 files changed, 105 insertions, 0 deletions

diff --git a/src/mainboard/google/butterfly/devicetree.cb b/src/mainboard/google/butterfly/devicetree.cb
new file mode 100644
index 0000000000..d4e2ccdfa1
--- /dev/null
+++ b/src/mainboard/google/butterfly/devicetree.cb
@@ -0,0 +1,105 @@
+chip northbridge/intel/sandybridge
+
+	# Enable DisplayPort Hotplug with 6ms pulse
+	register "gpu_dp_d_hotplug" = "0x06"
+
+
+	# Enable Panel as LVDS and configure power delays
+	register "gpu_panel_port_select" = "0"			# LVDS
+	register "gpu_panel_power_cycle_delay" = "6"		# T7: 500ms
+	register "gpu_panel_power_up_delay" = "100"		# T1+T2: 10ms
+	register "gpu_panel_power_down_delay" = "100"		# T5+T6: 10ms
+	register "gpu_panel_power_backlight_on_delay" = "2100"	# T3: 210ms
+	register "gpu_panel_power_backlight_off_delay" = "2100"	# T4: 210ms
+
+	device lapic_cluster 0 on
+		chip cpu/intel/socket_rPGA989
+			device lapic 0 on end
+		end
+		chip cpu/intel/model_206ax
+			# Magic APIC ID to locate this chip
+			device lapic 0xACAC off end
+
+			# Coordinate with HW_ALL
+			register "pstate_coord_type" = "0xfe"
+
+			register "c1_acpower" = "1"	# ACPI(C1) = MWAIT(C1)
+			register "c2_acpower" = "3"	# ACPI(C2) = MWAIT(C3)
+			register "c3_acpower" = "5"	# ACPI(C3) = MWAIT(C7)
+
+			register "c1_battery" = "1"	# ACPI(C1) = MWAIT(C1)
+			register "c2_battery" = "3"	# ACPI(C2) = MWAIT(C3)
+			register "c3_battery" = "5"	# ACPI(C3) = MWAIT(C7)
+		end
+	end
+
+	device pci_domain 0 on
+		device pci 00.0 on end # host bridge
+		device pci 01.0 off end # PCIe Bridge for discrete graphics
+		device pci 02.0 on end # vga controller
+
+		chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH
+			register "pirqa_routing" = "0x8b"
+			register "pirqb_routing" = "0x8a"
+			register "pirqc_routing" = "0x8b"
+			register "pirqd_routing" = "0x8b"
+			register "pirqe_routing" = "0x80"
+			register "pirqf_routing" = "0x80"
+			register "pirqg_routing" = "0x80"
+			register "pirqh_routing" = "0x80"
+
+			# GPI routing
+			#  0 No effect (default)
+			#  1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set)
+			#  2 SCI (if corresponding GPIO_EN bit is also set)
+			register "alt_gp_smi_en" = "0x0000"
+			#register "gpi1_routing" = "1"	#SMI from EC
+			register "gpi13_routing" = "2"	#SCI from EC
+
+			register "ide_legacy_combined" = "0x0"
+			register "sata_ahci" = "0x1"
+			register "sata_port_map" = "0x3"	#enable SATA ports 0 & 1
+
+			# Enable EC Port 0x68/0x6C
+			register "gen1_dec" = "0x00040069"
+
+			# EC range is 0x380-0387
+			register "gen2_dec" = "0x00040381"
+
+			# Enable zero-based linear PCIe root port functions
+			register "pcie_port_coalesce" = "1"
+
+			device pci 14.0 on end # USB 3.0 Controller
+			device pci 16.0 on end # Management Engine Interface 1
+			device pci 16.1 off end # Management Engine Interface 2
+			device pci 16.2 off end # Management Engine IDE-R
+			device pci 16.3 off end # Management Engine KT
+			device pci 19.0 off end # Intel Gigabit Ethernet
+			device pci 1a.0 on end # USB2 EHCI #2
+			device pci 1b.0 on end # High Definition Audio
+			device pci 1c.0 on end # PCIe Port #1 (mini PCIe Slot - WLAN & Serial debug)
+			device pci 1c.1 on end # PCIe Port #2 (ETH0)
+			device pci 1c.2 on end # PCIe Port #3 (Card Reader)
+				#force ASPM for PCIe bridge to Card Reader
+				register "pcie_aspm_f2" = "0x3"
+			device pci 1c.3 off end # PCIe Port #4
+			device pci 1c.4 off end # PCIe Port #5
+			device pci 1c.5 off end # PCIe Port #6
+			device pci 1c.6 off end # PCIe Port #7
+			device pci 1c.7 off end # PCIe Port #8
+			device pci 1d.0 on end # USB2 EHCI #1
+			device pci 1e.0 off end # PCI bridge
+			device pci 1f.0 on #LPC bridge
+				chip ec/quanta/ene_kb3940q
+					# 60/64 KBC
+					device pnp ff.1 on # dummy address
+					end
+				end
+			end # LPC bridge
+			device pci 1f.2 on end # SATA Controller 1
+			device pci 1f.3 on end # SMBus
+			device pci 1f.5 off end # SATA Controller 2
+			device pci 1f.6 on end # Thermal
+		end
+	end
+end