mb/google/brya/var/nereid: Initialise overridetree

Add an initial overridetree for nereid based on the pre-proto schematic
and build matrix.

BUG=b:197479026
TEST=abuild -a -x -c max -p none -t google/brya -b nereid

Change-Id: I7d313439337c84ab1024b3570cc7b57b4255af5d
Signed-off-by: Reka Norman <rekanorman@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61840
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>

1 files changed, 184 insertions, 2 deletions

diff --git a/src/mainboard/google/brya/variants/nereid/overridetree.cb b/src/mainboard/google/brya/variants/nereid/overridetree.cb
index ee861420f6..add5e213f4 100644
--- a/src/mainboard/google/brya/variants/nereid/overridetree.cb
+++ b/src/mainboard/google/brya/variants/nereid/overridetree.cb
@@ -1,4 +1,186 @@
+fw_config
+	field DB_USB 0 1
+		option DB_NONE		0
+		option DB_1C_1A		1
+		option DB_1A_HDMI	3
+	end
+end
+
 chip soc/intel/alderlake
-        device domain 0 on
-        end
+	register "SaGv" = "SaGv_Enabled"
+
+	register "typec_aux_bias_pads[0]" = "{.pad_auxp_dc = GPP_E22, .pad_auxn_dc = GPP_E23}"
+	register "typec_aux_bias_pads[1]" = "{.pad_auxp_dc = GPP_A21, .pad_auxn_dc = GPP_A22}"
+
+	register "usb2_ports[6]" = "USB2_PORT_MID(OC_SKIP)"	# WFC
+
+	device domain 0 on
+		device ref i2c1 on
+			chip drivers/i2c/hid
+				register "generic.hid" = ""GDIX0000""
+				register "generic.desc" = ""Goodix Touchscreen""
+				register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C7_IRQ)"
+				register "generic.probed" = "1"
+				register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)"
+				register "generic.enable_delay_ms" = "20"
+				register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C1)"
+				register "generic.reset_delay_ms" = "180"
+				register "generic.reset_off_delay_ms" = "3"
+				register "generic.stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C6)"
+				register "generic.stop_off_delay_ms" = "1"
+				register "generic.has_power_resource" = "1"
+				register "hid_desc_reg_offset" = "0x01"
+				device i2c 5d on end
+			end
+		end
+		device ref i2c3 on
+			chip drivers/i2c/generic
+				register "hid" = ""RTL5682""
+				register "name" = ""RT58""
+				register "desc" = ""Headset Codec""
+				register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_A23)"
+				# Set the jd_src to RT5668_JD1 for jack detection
+				register "property_count" = "1"
+				register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER"
+				register "property_list[0].name" = ""realtek,jd-src""
+				register "property_list[0].integer" = "1"
+				device i2c 1a on end
+			end
+			chip drivers/generic/alc1015
+				register "hid" = ""RTL1019""
+				register "sdb" =  "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A11)"
+				device generic 0 on end
+			end
+		end
+		device ref i2c5 on
+			chip drivers/i2c/generic
+				register "hid" = ""ELAN0000""
+				register "desc" = ""ELAN Touchpad""
+				register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_F14_IRQ)"
+				register "wake" = "GPE0_DW2_14"
+				register "probed" = "1"
+				device i2c 15 on end
+			end
+		end
+		device ref pcie_rp4 on
+			# PCIe 4 WLAN
+			register "pch_pcie_rp[PCH_RP(4)]" = "{
+				.clk_src = 2,
+				.clk_req = 2,
+				.flags = PCIE_RP_LTR | PCIE_RP_AER,
+			}"
+			chip drivers/wifi/generic
+				register "wake" = "GPE0_DW1_03"
+				device pci 00.0 on end
+			end
+			chip soc/intel/common/block/pcie/rtd3
+				register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_B11)"
+				register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_H20)"
+				register "srcclk_pin" = "2"
+				device generic 0 on end
+			end
+		end
+		device ref pch_espi on
+			chip ec/google/chromeec
+				use conn0 as mux_conn[0]
+				use conn1 as mux_conn[1]
+				device pnp 0c09.0 on end
+			end
+		end
+		device ref pmc hidden
+			chip drivers/intel/pmc_mux
+				device generic 0 on
+					chip drivers/intel/pmc_mux/conn
+						use usb2_port1 as usb2_port
+						use tcss_usb3_port1 as usb3_port
+						device generic 0 alias conn0 on end
+					end
+					chip drivers/intel/pmc_mux/conn
+						use usb2_port2 as usb2_port
+						use tcss_usb3_port2 as usb3_port
+						device generic 1 alias conn1 on end
+					end
+				end
+			end
+		end
+		device ref tcss_xhci on
+			chip drivers/usb/acpi
+				device ref tcss_root_hub on
+					chip drivers/usb/acpi
+						register "desc" = ""USB3 Type-C Port C0 (MLB)""
+						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
+						register "group" = "ACPI_PLD_GROUP(1, 1)"
+						device ref tcss_usb3_port1 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB3 Type-C Port C1 (DB)""
+						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
+						register "group" = "ACPI_PLD_GROUP(2, 1)"
+						device ref tcss_usb3_port2 on end
+					end
+				end
+			end
+		end
+		device ref xhci on
+			chip drivers/usb/acpi
+				device ref xhci_root_hub on
+					chip drivers/usb/acpi
+						register "desc" = ""USB2 Type-C Port C0 (MLB)""
+						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
+						register "group" = "ACPI_PLD_GROUP(1, 1)"
+						device ref usb2_port1 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB2 Type-C Port C1 (DB)""
+						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
+						register "group" = "ACPI_PLD_GROUP(2, 1)"
+						device ref usb2_port2 on
+							probe DB_USB DB_1C_1A
+						end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB2 Type-A Port A0 (MLB)""
+						register "type" = "UPC_TYPE_A"
+						register "group" = "ACPI_PLD_GROUP(3, 1)"
+						device ref usb2_port3 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB2 Type-A Port A1 (DB)""
+						register "type" = "UPC_TYPE_A"
+						register "group" = "ACPI_PLD_GROUP(4, 1)"
+						device ref usb2_port4 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB2 UFC""
+						register "type" = "UPC_TYPE_INTERNAL"
+						device ref usb2_port6 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB2 WFC""
+						register "type" = "UPC_TYPE_INTERNAL"
+						device ref usb2_port7 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB2 Bluetooth""
+						register "type" = "UPC_TYPE_INTERNAL"
+						register "reset_gpio" =
+							"ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D4)"
+						device ref usb2_port8 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB3 Type-A Port A0 (MLB)""
+						register "type" = "UPC_TYPE_USB3_A"
+						register "group" = "ACPI_PLD_GROUP(3, 1)"
+						device ref usb3_port1 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB3 Type-A Port A1 (DB)""
+						register "type" = "UPC_TYPE_USB3_A"
+						register "group" = "ACPI_PLD_GROUP(4, 1)"
+						device ref usb3_port2 on end
+					end
+				end
+			end
+		end
+	end
 end