mb/google/brya/var/brya4es: deprecate brya4es

The brya4es variant is no longer needed, removing code for brya4es.

BUG=b:246611270
TEST=None

Change-Id: I9b222f89fe766c63158518713be19d7959451721
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67667
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>

11 files changed, 0 insertions, 1150 deletions

diff --git a/src/mainboard/google/brya/variants/brya4es/Makefile.inc b/src/mainboard/google/brya/variants/brya4es/Makefile.inc
deleted file mode 100644
index 52d03980da..0000000000
--- a/src/mainboard/google/brya/variants/brya4es/Makefile.inc
+++ /dev/null
@@ -1,6 +0,0 @@
-bootblock-y += gpio.c
-romstage-y += gpio.c
-ramstage-$(CONFIG_FW_CONFIG) += fw_config.c
-ramstage-$(CONFIG_FW_CONFIG) += variant.c
-ramstage-y += gpio.c
-ramstage-y += ramstage.c
diff --git a/src/mainboard/google/brya/variants/brya4es/fw_config.c b/src/mainboard/google/brya/variants/brya4es/fw_config.c
deleted file mode 100644
index 17d284aa29..0000000000
--- a/src/mainboard/google/brya/variants/brya4es/fw_config.c
+++ /dev/null
@@ -1,130 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-
-#include <bootstate.h>
-#include <console/console.h>
-#include <fw_config.h>
-#include <gpio.h>
-
-static const struct pad_config dmic_enable_pads[] = {
-	PAD_CFG_NF(GPP_S2, NONE, DEEP, NF2),	/* DMIC_CLK0_R */
-	PAD_CFG_NF(GPP_S3, NONE, DEEP, NF2),	/* DMIC_DATA0_R */
-	PAD_CFG_NF(GPP_S6, NONE, DEEP, NF2),	/* DMIC_CLK1_R */
-	PAD_CFG_NF(GPP_S7, NONE, DEEP, NF2),	/* DMIC_DATA1_R */
-};
-
-static const struct pad_config dmic_disable_pads[] = {
-	PAD_NC(GPP_S2, NONE),
-	PAD_NC(GPP_S3, NONE),
-	PAD_NC(GPP_S6, NONE),
-	PAD_NC(GPP_S7, NONE),
-};
-
-static const struct pad_config sndw_enable_pads[] = {
-	PAD_CFG_NF(GPP_S0, NONE, DEEP, NF1),	/* SDW_HP_CLK_R */
-	PAD_CFG_NF(GPP_S1, NONE, DEEP, NF1),	/* SDW_HP_DATA_R */
-	PAD_CFG_NF(GPP_S4, NONE, DEEP, NF1),	/* SDW_SPKR_CLK */
-	PAD_CFG_NF(GPP_S5, NONE, DEEP, NF1),	/* SDW_SPKR_DATA */
-};
-
-static const struct pad_config sndw_disable_pads[] = {
-	PAD_NC(GPP_S0, NONE),
-	PAD_NC(GPP_S1, NONE),
-	PAD_NC(GPP_S4, NONE),
-	PAD_NC(GPP_S5, NONE),
-};
-
-static const struct pad_config i2s0_enable_pads[] = {
-	PAD_CFG_NF(GPP_R0, NONE, DEEP, NF2),	/* I2S_HP_SCLK_R */
-	PAD_CFG_NF(GPP_R1, NONE, DEEP, NF2),	/* I2S_HP_SFRM_R */
-	PAD_CFG_NF(GPP_R2, DN_20K, DEEP, NF2),	/* I2S_PCH_TX_HP_RX_STRAP */
-	PAD_CFG_NF(GPP_R3, NONE, DEEP, NF2),	/* I2S_PCH_RX_HP_TX */
-};
-
-static const struct pad_config i2s2_enable_pads[] = {
-	PAD_CFG_NF(GPP_R4, NONE, DEEP, NF2),	/* I2S_SPKR_SCLK_R */
-	PAD_CFG_NF(GPP_R5, NONE, DEEP, NF2),	/* I2S_SPKR_SFRM_R */
-	PAD_CFG_NF(GPP_R6, NONE, DEEP, NF2),	/* I2S_PCH_TX_SPKR_RX_R */
-	PAD_CFG_NF(GPP_R7, NONE, DEEP, NF2),	/* I2S_PCH_RX_SPKR_TX */
-};
-
-static const struct pad_config i2s0_disable_pads[] = {
-	PAD_NC(GPP_R0, NONE),
-	PAD_NC(GPP_R1, NONE),
-	PAD_NC(GPP_R2, NONE),
-	PAD_NC(GPP_R3, NONE),
-};
-
-static const struct pad_config i2s2_disable_pads[] = {
-	PAD_NC(GPP_R4, NONE),
-	PAD_NC(GPP_R5, NONE),
-	PAD_NC(GPP_R6, NONE),
-	PAD_NC(GPP_R7, NONE),
-};
-
-static const struct pad_config bt_i2s_enable_pads[] = {
-	PAD_CFG_NF(GPP_VGPIO_30, NONE, DEEP, NF3),	/* BT_I2S_BCLK */
-	PAD_CFG_NF(GPP_VGPIO_31, NONE, DEEP, NF3),	/* BT_I2S_SYNC */
-	PAD_CFG_NF(GPP_VGPIO_32, NONE, DEEP, NF3),	/* BT_I2S_SDO */
-	PAD_CFG_NF(GPP_VGPIO_33, NONE, DEEP, NF3),	/* BT_I2S_SDI */
-	PAD_CFG_NF(GPP_VGPIO_34, NONE, DEEP, NF1),	/* SSP2_SCLK */
-	PAD_CFG_NF(GPP_VGPIO_35, NONE, DEEP, NF1),	/* SSP2_SFRM */
-	PAD_CFG_NF(GPP_VGPIO_36, NONE, DEEP, NF1),	/* SSP_TXD */
-	PAD_CFG_NF(GPP_VGPIO_37, NONE, DEEP, NF1),	/* SSP_RXD */
-};
-
-static const struct pad_config bt_i2s_disable_pads[] = {
-	PAD_NC(GPP_VGPIO_30, NONE),
-	PAD_NC(GPP_VGPIO_31, NONE),
-	PAD_NC(GPP_VGPIO_32, NONE),
-	PAD_NC(GPP_VGPIO_33, NONE),
-	PAD_NC(GPP_VGPIO_34, NONE),
-	PAD_NC(GPP_VGPIO_35, NONE),
-	PAD_NC(GPP_VGPIO_36, NONE),
-	PAD_NC(GPP_VGPIO_37, NONE),
-};
-
-static void enable_i2s(void)
-{
-	gpio_configure_pads(dmic_enable_pads, ARRAY_SIZE(dmic_enable_pads));
-	gpio_configure_pads(i2s0_enable_pads, ARRAY_SIZE(i2s0_enable_pads));
-	gpio_configure_pads(i2s2_enable_pads, ARRAY_SIZE(i2s2_enable_pads));
-	gpio_configure_pads(sndw_disable_pads, ARRAY_SIZE(sndw_disable_pads));
-}
-
-static void fw_config_handle(void *unused)
-{
-	if (!fw_config_is_provisioned() || fw_config_probe(FW_CONFIG(AUDIO, AUDIO_UNKNOWN))) {
-		printk(BIOS_INFO, "Disable audio related GPIO pins.\n");
-		gpio_configure_pads(i2s0_disable_pads, ARRAY_SIZE(i2s0_disable_pads));
-		gpio_configure_pads(i2s2_disable_pads, ARRAY_SIZE(i2s2_disable_pads));
-		gpio_configure_pads(dmic_disable_pads, ARRAY_SIZE(dmic_disable_pads));
-		gpio_configure_pads(sndw_disable_pads, ARRAY_SIZE(sndw_disable_pads));
-		return;
-	}
-
-	if (fw_config_probe(FW_CONFIG(AUDIO, MAX98373_ALC5682_SNDW))) {
-		printk(BIOS_INFO, "Configure audio over SoundWire with MAX98373 ALC5682.\n");
-		gpio_configure_pads(dmic_enable_pads, ARRAY_SIZE(dmic_enable_pads));
-		gpio_configure_pads(sndw_enable_pads, ARRAY_SIZE(sndw_enable_pads));
-		printk(BIOS_INFO, "BT offload enabled\n");
-		gpio_configure_pads(i2s0_enable_pads, ARRAY_SIZE(i2s0_enable_pads));
-		gpio_configure_pads(i2s2_disable_pads, ARRAY_SIZE(i2s2_disable_pads));
-		gpio_configure_pads(bt_i2s_enable_pads, ARRAY_SIZE(bt_i2s_enable_pads));
-	} else {
-		printk(BIOS_INFO, "BT offload disabled\n");
-		gpio_configure_pads(i2s0_disable_pads, ARRAY_SIZE(i2s0_disable_pads));
-		gpio_configure_pads(i2s2_disable_pads, ARRAY_SIZE(i2s2_disable_pads));
-		gpio_configure_pads(bt_i2s_disable_pads, ARRAY_SIZE(bt_i2s_disable_pads));
-	}
-
-	if (fw_config_probe(FW_CONFIG(AUDIO, MAX98357_ALC5682I_I2S))) {
-		printk(BIOS_INFO, "Configure audio over I2S with MAX98357 ALC5682I.\n");
-		enable_i2s();
-	}
-
-	if (fw_config_probe(FW_CONFIG(AUDIO, ALC1019_NAU88L25B_I2S))) {
-		printk(BIOS_INFO, "Configure audio over I2S with ALC1019 NAU88L25B.\n");
-		enable_i2s();
-	}
-}
-BOOT_STATE_INIT_ENTRY(BS_DEV_ENABLE, BS_ON_ENTRY, fw_config_handle, NULL);
diff --git a/src/mainboard/google/brya/variants/brya4es/gpio.c b/src/mainboard/google/brya/variants/brya4es/gpio.c
deleted file mode 100644
index b343deafce..0000000000
--- a/src/mainboard/google/brya/variants/brya4es/gpio.c
+++ /dev/null
@@ -1,161 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-
-#include <baseboard/variants.h>
-#include <boardid.h>
-#include <soc/gpio.h>
-
-static const struct pad_config board_id0_1_overrides[] = {
-	/* B2  : VRALERT# ==> NC */
-	PAD_NC(GPP_B2, NONE),
-	/* B7  : ISH_12C1_SDA ==> PCH_I2C_TPM_SDA */
-	PAD_CFG_NF_LOCK(GPP_B7, NONE, NF2, LOCK_CONFIG),
-	/* B8  : ISH_12C1_SCL ==> PCH_I2C_TPM_SCL */
-	PAD_CFG_NF_LOCK(GPP_B8, NONE, NF2, LOCK_CONFIG),
-	/* B15 : TIME_SYNC0 ==> NC */
-	PAD_NC(GPP_B15, NONE),
-	/* C3  : SML0CLK ==> NC */
-	PAD_NC(GPP_C3, NONE),
-	/* C4  : SML0DATA ==> NC */
-	PAD_NC(GPP_C4, NONE),
-	/* D13 : ISH_UART0_RXD ==> PCH_I2C_CAM_SDA */
-	PAD_CFG_NF(GPP_D13, NONE, DEEP, NF3),
-	/* D14 : ISH_UART0_TXD ==> PCH_I2C_CAM_SCL */
-	PAD_CFG_NF(GPP_D14, NONE, DEEP, NF3),
-	/* F19 : SRCCLKREQ6# ==> WWAN_SIM1_DET_OD */
-	PAD_CFG_GPI(GPP_F19, UP_20K, DEEP),
-	/* F20 : EXT_PWR_GATE# ==> HPS_RST_R */
-	PAD_CFG_GPO(GPP_F20, 0, DEEP),
-	/* F21 : EXT_PWR_GATE2# ==> WAKE_ON_WWAN_ODL */
-	PAD_NC(GPP_F21, NONE),
-	/* H21 : IMGCLKOUT2 ==> WLAN_INT_L */
-	PAD_CFG_GPI_APIC(GPP_H21, NONE, DEEP, EDGE_SINGLE, NONE),
-	/* GPD2: LAN_WAKE# ==> NC */
-	PAD_NC(GPD2, NONE),
-};
-
-/* Early pad configuration in bootblock for board id < 2 */
-static const struct pad_config early_gpio_table[] = {
-	/* A13 : PMC_I2C_SCL ==> GSC_PCH_INT_ODL */
-	PAD_CFG_GPI_APIC(GPP_A13, NONE, PLTRST, LEVEL, INVERT),
-	/* B7  : ISH_12C1_SDA ==> PCH_I2C_TPM_SDA */
-	PAD_CFG_NF(GPP_B7, NONE, DEEP, NF2),
-	/* B8  : ISH_12C1_SCL ==> PCH_I2C_TPM_SCL */
-	PAD_CFG_NF(GPP_B8, NONE, DEEP, NF2),
-	/*
-	 * D1  : ISH_GP1 ==> FP_RST_ODL
-	 * FP_RST_ODL comes out of reset as hi-z and does not have an external pull-down.
-	 * To ensure proper power sequencing for the FPMCU device, reset signal is driven low
-	 * early on in bootblock, followed by enabling of power. Reset signal is deasserted
-	 * later on in ramstage. Since reset signal is asserted in bootblock, it results in
-	 * FPMCU not working after a S3 resume. This is a known issue.
-	 */
-	PAD_CFG_GPO(GPP_D1, 0, DEEP),
-	/* D2  : ISH_GP2 ==> EN_FP_PWR */
-	PAD_CFG_GPO(GPP_D2, 1, DEEP),
-	/* E0  : SATAXPCIE0 ==> WWAN_PERST_L (updated in ramstage) */
-	PAD_CFG_GPO(GPP_E0, 0, DEEP),
-	/* E13 : THC0_SPI1_IO2 ==> MEM_CH_SEL */
-	PAD_CFG_GPI(GPP_E13, NONE, DEEP),
-	/* E16 : RSVD_TP ==> WWAN_RST_L (updated in ramstage) */
-	PAD_CFG_GPO(GPP_E16, 0, DEEP),
-	/* E15 : RSVD_TP ==> PCH_WP_OD */
-	PAD_CFG_GPI_GPIO_DRIVER(GPP_E15, NONE, DEEP),
-	/* F18 : THC1_SPI2_INT# ==> EC_IN_RW_OD */
-	PAD_CFG_GPI(GPP_F18, NONE, DEEP),
-	/* F21 : EXT_PWR_GATE2# ==> NC */
-	PAD_NC(GPP_F21, NONE),
-	/* H10 : UART0_RXD ==> UART_PCH_RX_DBG_TX */
-	PAD_CFG_NF(GPP_H10, NONE, DEEP, NF2),
-	/* H11 : UART0_TXD ==> UART_PCH_TX_DBG_RX */
-	PAD_CFG_NF(GPP_H11, NONE, DEEP, NF2),
-	/* H13 : I2C7_SCL ==> EN_PP3300_SD */
-	PAD_NC(GPP_H13, UP_20K),
-};
-
-/* Early pad configuration in bootblock for board id 2 */
-static const struct pad_config early_gpio_table_id2[] = {
-	/* A12 : SATAXPCIE1 ==> EN_PP3300_WWAN */
-	PAD_CFG_GPO(GPP_A12, 1, DEEP),
-	/* A13 : PMC_I2C_SCL ==> GSC_PCH_INT_ODL */
-	PAD_CFG_GPI_APIC(GPP_A13, NONE, PLTRST, LEVEL, INVERT),
-	/* B4  : PROC_GP3 ==> SSD_PERST_L */
-	PAD_CFG_GPO(GPP_B4, 0, DEEP),
-	/* B7  : ISH_12C1_SDA ==> PCH_I2C_TPM_SDA */
-	PAD_CFG_NF(GPP_B7, NONE, DEEP, NF2),
-	/* B8  : ISH_12C1_SCL ==> PCH_I2C_TPM_SCL */
-	PAD_CFG_NF(GPP_B8, NONE, DEEP, NF2),
-	/*
-	 * D1  : ISH_GP1 ==> FP_RST_ODL
-	 * FP_RST_ODL comes out of reset as hi-z and does not have an external pull-down.
-	 * To ensure proper power sequencing for the FPMCU device, reset signal is driven low
-	 * early on in bootblock, followed by enabling of power. Reset signal is deasserted
-	 * later on in ramstage. Since reset signal is asserted in bootblock, it results in
-	 * FPMCU not working after a S3 resume. This is a known issue.
-	 */
-	PAD_CFG_GPO(GPP_D1, 0, DEEP),
-	/* D2  : ISH_GP2 ==> EN_FP_PWR */
-	PAD_CFG_GPO(GPP_D2, 1, DEEP),
-	/* D11 : ISH_SPI_MISO ==> EN_PP3300_SSD */
-	PAD_CFG_GPO(GPP_D11, 1, DEEP),
-	/* E0  : SATAXPCIE0 ==> WWAN_PERST_L (updated in ramstage) */
-	PAD_CFG_GPO(GPP_E0, 0, DEEP),
-	/* E13 : THC0_SPI1_IO2 ==> MEM_CH_SEL */
-	PAD_CFG_GPI(GPP_E13, NONE, DEEP),
-	/* E16 : RSVD_TP ==> WWAN_RST_L (updated in ramstage) */
-	PAD_CFG_GPO(GPP_E16, 0, DEEP),
-	/* E15 : RSVD_TP ==> PCH_WP_OD */
-	PAD_CFG_GPI_GPIO_DRIVER(GPP_E15, NONE, DEEP),
-	/* F18 : THC1_SPI2_INT# ==> EC_IN_RW_OD */
-	PAD_CFG_GPI(GPP_F18, NONE, DEEP),
-	/* F21 : EXT_PWR_GATE2# ==> WWAN_FCPO_L (updated in romstage) */
-	PAD_CFG_GPO(GPP_F21, 0, DEEP),
-	/* H10 : UART0_RXD ==> UART_PCH_RX_DBG_TX */
-	PAD_CFG_NF(GPP_H10, NONE, DEEP, NF2),
-	/* H11 : UART0_TXD ==> UART_PCH_TX_DBG_RX */
-	PAD_CFG_NF(GPP_H11, NONE, DEEP, NF2),
-	/* H13 : I2C7_SCL ==> EN_PP3300_SD */
-	PAD_NC(GPP_H13, UP_20K),
-};
-
-static const struct pad_config romstage_gpio_table[] = {
-	/* B4  : PROC_GP3 ==> SSD_PERST_L */
-	PAD_CFG_GPO(GPP_B4, 1, DEEP),
-
-	/* D1  : ISH_GP1 ==> FP_RST_ODL */
-	PAD_CFG_GPO(GPP_D1, 0, DEEP),
-	/* D2  : ISH_GP2 ==> EN_FP_PWR */
-	PAD_CFG_GPO(GPP_D2, 0, DEEP),
-
-	/* F21 : EXT_PWR_GATE2# ==> WWAN_FCPO_L (set here for correct power sequencing) */
-	PAD_CFG_GPO(GPP_F21, 1, DEEP),
-};
-
-const struct pad_config *variant_gpio_override_table(size_t *num)
-{
-	const uint32_t id = board_id();
-	if (id == BOARD_ID_UNKNOWN || id < 2) {
-		*num = ARRAY_SIZE(board_id0_1_overrides);
-		return board_id0_1_overrides;
-	}
-
-	*num = 0;
-	return NULL;
-}
-
-const struct pad_config *variant_early_gpio_table(size_t *num)
-{
-	const uint32_t id = board_id();
-	if (id == BOARD_ID_UNKNOWN || id < 2) {
-		*num = ARRAY_SIZE(early_gpio_table);
-		return early_gpio_table;
-	}
-
-	*num = ARRAY_SIZE(early_gpio_table_id2);
-	return early_gpio_table_id2;
-}
-
-const struct pad_config *variant_romstage_gpio_table(size_t *num)
-{
-	*num = ARRAY_SIZE(romstage_gpio_table);
-	return romstage_gpio_table;
-}
diff --git a/src/mainboard/google/brya/variants/brya4es/include/variant/ec.h b/src/mainboard/google/brya/variants/brya4es/include/variant/ec.h
deleted file mode 100644
index 4fc0622f15..0000000000
--- a/src/mainboard/google/brya/variants/brya4es/include/variant/ec.h
+++ /dev/null
@@ -1,8 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-
-#ifndef MAINBOARD_EC_H
-#define MAINBOARD_EC_H
-
-#include <baseboard/ec.h>
-
-#endif /* MAINBOARD_GPIO_H */
diff --git a/src/mainboard/google/brya/variants/brya4es/include/variant/gpio.h b/src/mainboard/google/brya/variants/brya4es/include/variant/gpio.h
deleted file mode 100644
index 23338de2d8..0000000000
--- a/src/mainboard/google/brya/variants/brya4es/include/variant/gpio.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-
-#ifndef __MAINBOARD_GPIO_H__
-#define __MAINBOARD_GPIO_H__
-
-#include <baseboard/gpio.h>
-
-#define WWAN_FCPO	GPP_F21
-#define WWAN_RST	GPP_E16
-#define WWAN_PERST	GPP_E0
-#define T1_OFF_MS	16
-#define T2_OFF_MS	2
-
-#endif /* __MAINBOARD_GPIO_H__ */
diff --git a/src/mainboard/google/brya/variants/brya4es/memory/Makefile.inc b/src/mainboard/google/brya/variants/brya4es/memory/Makefile.inc
deleted file mode 100644
index 70c8d17adb..0000000000
--- a/src/mainboard/google/brya/variants/brya4es/memory/Makefile.inc
+++ /dev/null
@@ -1,10 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-# This is an auto-generated file. Do not edit!!
-# Generated by:
-# util/spd_tools/bin/part_id_gen ADL lp4x src/mainboard/google/brya/variants/brya0/memory src/mainboard/google/brya/variants/brya0/memory/mem_parts_used.txt
-
-SPD_SOURCES =
-SPD_SOURCES += spd/lp4x/set-0/spd-1.hex      # ID = 0(0b0000)  Parts = MT53E512M32D2NP-046 WT:F, H9HCNNNBKMMLXR-NEE
-SPD_SOURCES += spd/lp4x/set-0/spd-4.hex      # ID = 1(0b0001)  Parts = MT53E1G32D2NP-046 WT:A
-SPD_SOURCES += spd/lp4x/set-0/spd-7.hex      # ID = 2(0b0010)  Parts = MT53E2G32D4NQ-046 WT:A
-SPD_SOURCES += spd/lp4x/set-0/spd-3.hex      # ID = 3(0b0011)  Parts = H9HCNNNCPMMLXR-NEE, MT53E1G32D2NP-046 WT:B
diff --git a/src/mainboard/google/brya/variants/brya4es/memory/dram_id.generated.txt b/src/mainboard/google/brya/variants/brya4es/memory/dram_id.generated.txt
deleted file mode 100644
index bfc1ead13f..0000000000
--- a/src/mainboard/google/brya/variants/brya4es/memory/dram_id.generated.txt
+++ /dev/null
@@ -1,12 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-# This is an auto-generated file. Do not edit!!
-# Generated by:
-# util/spd_tools/bin/part_id_gen ADL lp4x src/mainboard/google/brya/variants/brya0/memory src/mainboard/google/brya/variants/brya0/memory/mem_parts_used.txt
-
-DRAM Part Name                 ID to assign
-MT53E512M32D2NP-046 WT:F       0 (0000)
-H9HCNNNBKMMLXR-NEE             0 (0000)
-MT53E1G32D2NP-046 WT:A         1 (0001)
-MT53E2G32D4NQ-046 WT:A         2 (0010)
-H9HCNNNCPMMLXR-NEE             3 (0011)
-MT53E1G32D2NP-046 WT:B         3 (0011)
diff --git a/src/mainboard/google/brya/variants/brya4es/memory/mem_parts_used.txt b/src/mainboard/google/brya/variants/brya4es/memory/mem_parts_used.txt
deleted file mode 100644
index c8a24ccd6d..0000000000
--- a/src/mainboard/google/brya/variants/brya4es/memory/mem_parts_used.txt
+++ /dev/null
@@ -1,6 +0,0 @@
-MT53E512M32D2NP-046 WT:F
-H9HCNNNBKMMLXR-NEE
-MT53E1G32D2NP-046 WT:A
-MT53E2G32D4NQ-046 WT:A
-H9HCNNNCPMMLXR-NEE
-MT53E1G32D2NP-046 WT:B
diff --git a/src/mainboard/google/brya/variants/brya4es/overridetree.cb b/src/mainboard/google/brya/variants/brya4es/overridetree.cb
deleted file mode 100644
index de10765ceb..0000000000
--- a/src/mainboard/google/brya/variants/brya4es/overridetree.cb
+++ /dev/null
@@ -1,772 +0,0 @@
-fw_config
-	field DB_USB 0 3
-		option USB_ABSENT		0
-		option USB3_PS8815		1
-	end
-	field DB_SD 4 5
-		option SD_ABSENT		0
-		option SD_GL9755S		1
-	end
-	field KB_BL 7 7
-		option KB_BL_ABSENT		0
-		option KB_BL_PRESENT		1
-	end
-	field AUDIO 8 10
-		option AUDIO_UNKNOWN		0
-		option MAX98357_ALC5682I_I2S	1
-		option MAX98373_ALC5682_SNDW	2
-		option MAX98373_NAU88L25B_I2S	3
-		option ALC1019_NAU88L25B_I2S	4
-	end
-	field DB_LTE 11 12
-		option LTE_ABSENT		0
-		option LTE_USB			1
-		option LTE_PCIE			2
-	end
-	field UFC 13 14
-		option UFC_USB			0
-		option UFC_MIPI_IMX208		1
-	end
-	# Bits 15 and 16 were intended for WFC but never declared here
-	field HPS 17 17
-		option HPS_ABSENT               0
-		option HPS_PRESENT              1
-	end
-end
-
-chip soc/intel/alderlake
-	register "sagv" = "SaGv_Enabled"
-
-	register "platform_pmax" = "145"
-
-	register "usb2_ports[7]" = "USB2_PORT_MID(OC_SKIP)"	# Type-A MLB Port
-
-	register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)" # USB3/2 Type A MLB port
-
-	register "typec_aux_bias_pads[0]" = "{.pad_auxp_dc = GPP_E22, .pad_auxn_dc = GPP_E23}"
-
-	# FIVR configurations for brya are disabled since the board doesn't have V1p05 and Vnn
-	# bypass rails implemented.
-	register "ext_fivr_settings" = "{
-		.configure_ext_fivr = 1,
-	}"
-
-	device domain 0 on
-		device ref dtt on
-			chip drivers/intel/dptf
-				## sensor information
-				register "options.tsr[0].desc" = ""DRAM_SOC""
-				register "options.tsr[1].desc" = ""Ambient""
-				register "options.tsr[2].desc" = ""Charger""
-				register "options.tsr[3].desc" = ""WWAN""
-
-				# TODO: below values are initial reference values only
-				## Active Policy
-				register "policies.active" = "{
-					[0] = {
-						.target = DPTF_CPU,
-						.thresholds = {
-								TEMP_PCT(85, 90),
-								TEMP_PCT(80, 80),
-								TEMP_PCT(75, 70),
-								TEMP_PCT(70, 50),
-								TEMP_PCT(65, 30),
-						}
-					},
-					[1] = {
-						.target = DPTF_TEMP_SENSOR_1,
-						.thresholds = {
-								TEMP_PCT(50, 90),
-								TEMP_PCT(48, 70),
-								TEMP_PCT(46, 60),
-								TEMP_PCT(43, 40),
-								TEMP_PCT(40, 30),
-						}
-					}
-				}"
-
-				## Passive Policy
-				register "policies.passive" = "{
-					[0] = DPTF_PASSIVE(CPU,         CPU,           95, 5000),
-					[1] = DPTF_PASSIVE(CPU,         TEMP_SENSOR_0, 75, 5000),
-					[2] = DPTF_PASSIVE(CPU,		TEMP_SENSOR_1, 75, 5000),
-					[3] = DPTF_PASSIVE(CHARGER,	TEMP_SENSOR_2, 75, 5000),
-					[4] = DPTF_PASSIVE(CPU,         TEMP_SENSOR_3, 75, 5000),
-				}"
-
-				## Critical Policy
-				register "policies.critical" = "{
-					[0] = DPTF_CRITICAL(CPU,               105, SHUTDOWN),
-					[1] = DPTF_CRITICAL(TEMP_SENSOR_0,      85, SHUTDOWN),
-					[2] = DPTF_CRITICAL(TEMP_SENSOR_1,      85, SHUTDOWN),
-					[3] = DPTF_CRITICAL(TEMP_SENSOR_2,      85, SHUTDOWN),
-					[4] = DPTF_CRITICAL(TEMP_SENSOR_3,      85, SHUTDOWN),
-				}"
-
-				register "controls.power_limits" = "{
-					.pl1 = {
-							.min_power = 3000,
-							.max_power = 15000,
-							.time_window_min = 28 * MSECS_PER_SEC,
-							.time_window_max = 32 * MSECS_PER_SEC,
-							.granularity = 200,
-						},
-					.pl2 = {
-							.min_power = 55000,
-							.max_power = 55000,
-							.time_window_min = 28 * MSECS_PER_SEC,
-							.time_window_max = 32 * MSECS_PER_SEC,
-							.granularity = 1000,
-						}
-				}"
-
-				## Charger Performance Control (Control, mA)
-				register "controls.charger_perf" = "{
-					[0] = { 255, 1700 },
-					[1] = {  24, 1500 },
-					[2] = {  16, 1000 },
-					[3] = {   8,  500 }
-				}"
-
-				## Fan Performance Control (Percent, Speed, Noise, Power)
-				register "controls.fan_perf" = "{
-					[0] = {  90, 6700, 220, 2200, },
-					[1] = {  80, 5800, 180, 1800, },
-					[2] = {  70, 5000, 145, 1450, },
-					[3] = {  60, 4900, 115, 1150, },
-					[4] = {  50, 3838,  90,  900, },
-					[5] = {  40, 2904,  55,  550, },
-					[6] = {  30, 2337,  30,  300, },
-					[7] = {  20, 1608,  15,  150, },
-					[8] = {  10,  800,  10,  100, },
-					[9] = {   0,    0,   0,   50, }
-				}"
-
-				## Fan options
-				register "options.fan.fine_grained_control" = "1"
-				register "options.fan.step_size" = "2"
-
-				device generic 0 alias dptf_policy on end
-			end
-		end
-		device ref ipu on
-			chip drivers/intel/mipi_camera
-				register "acpi_uid" = "0x50000"
-				register "acpi_name" = ""IPU0""
-				register "device_type" = "INTEL_ACPI_CAMERA_CIO2"
-
-				register "cio2_num_ports" = "1"
-				register "cio2_lanes_used" = "{4}" # 4 CSI Camera lanes are used
-				register "cio2_lane_endpoint[0]" = ""^I2C0.CAM0""
-				register "cio2_prt[0]" = "2"
-				device generic 0 on
-					# MIPI lanes are split between UFC and WFC depending on
-					# whether the UFC is USB or MIPI hence probing UFC_USB
-					probe UFC UFC_USB
-				end
-			end
-			chip drivers/intel/mipi_camera
-				register "acpi_uid" = "0x50000"
-				register "acpi_name" = ""IPU0""
-				register "device_type" = "INTEL_ACPI_CAMERA_CIO2"
-
-				register "cio2_num_ports" = "2"
-				register "cio2_lanes_used" = "{4,2}" # 4 and 2 CSI Camera lanes are used
-				register "cio2_lane_endpoint[0]" = ""^I2C0.CAM0""
-				register "cio2_lane_endpoint[1]" = ""^I2C2.CAM1""
-				register "cio2_prt[0]" = "2"
-				register "cio2_prt[1]" = "1"
-				device generic 1 on
-					probe UFC UFC_MIPI_IMX208
-				end
-			end
-		end
-		device ref cnvi_wifi on
-			chip drivers/wifi/generic
-				register "wake" = "GPE0_PME_B0"
-				register "enable_cnvi_ddr_rfim" = "true"
-				device generic 0 on end
-			end
-		end
-		device ref pcie_rp6 on
-			# Enable WWAN PCIE 6 using clk 5
-			register "pch_pcie_rp[PCH_RP(6)]" = "{
-				.clk_src = 5,
-				.clk_req = 5,
-				.flags = PCIE_RP_LTR | PCIE_RP_AER,
-			}"
-			chip soc/intel/common/block/pcie/rtd3
-				register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_E0)"
-				register "reset_off_delay_ms" = "20"
-				# register "reset_delay_ms" = "1000"
-				register "srcclk_pin" = "5"
-				register "ext_pm_support" = "ACPI_PCIE_RP_EMIT_ALL"
-				register "skip_on_off_support" = "true"
-				device generic 0 alias rp6_rtd3 on
-					probe DB_LTE LTE_PCIE
-				end
-			end
-			chip drivers/wwan/fm
-				register "fcpo_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_F21)"
-				register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_E16)"
-				register "perst_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_E0)"
-				register "wake_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_A7)"
-				register "add_acpi_dma_property" = "true"
-				use rp6_rtd3 as rtd3dev
-				device generic 0 on
-					probe DB_LTE LTE_PCIE
-				end
-			end
-			probe DB_LTE LTE_PCIE
-		end
-		device ref tcss_dma0 on
-			chip drivers/intel/usb4/retimer
-				register "dfp[0].power_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_E4)"
-				use tcss_usb3_port1 as dfp[0].typec_port
-				device generic 0 on end
-			end
-		end
-		device ref tcss_dma1 on
-			chip drivers/intel/usb4/retimer
-				register "dfp[0].power_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_E4)"
-				use tcss_usb3_port3 as dfp[0].typec_port
-				device generic 0 on end
-			end
-		end
-		device ref pcie_rp8 on
-			chip soc/intel/common/block/pcie/rtd3
-				register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_H13)"
-				register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D18)"
-				register "srcclk_pin" = "3"
-				device generic 0 on end
-			end
-		end	#PCIE8 SD card
-		device ref i2c0 on
-			chip drivers/i2c/generic
-				register "hid" = ""10EC5682""
-				register "name" = ""RT58""
-				register "desc" = ""Headset Codec""
-				register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_A23)"
-				# Set the jd_src to RT5668_JD1 for jack detection
-				register "property_count" = "1"
-				register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER"
-				register "property_list[0].name" = ""realtek,jd-src""
-				register "property_list[0].integer" = "1"
-				device i2c 1a on
-					probe AUDIO MAX98357_ALC5682I_I2S
-				end
-			end
-			chip drivers/i2c/nau8825
-				register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPP_A23)"
-				register "jkdet_enable" = "1"
-				register "jkdet_pull_enable" = "0"
-				register "jkdet_polarity" = "1"		# ActiveLow
-				register "vref_impedance" = "2"		# 125kOhm
-				register "micbias_voltage" = "6"	# 2.754
-				register "sar_threshold_num" = "4"
-				register "sar_threshold[0]" = "0x0c"
-				register "sar_threshold[1]" = "0x1c"
-				register "sar_threshold[2]" = "0x38"
-				register "sar_threshold[3]" = "0x60"
-				register "sar_hysteresis" = "1"
-				register "sar_voltage" = "0"		# VDDA
-				register "sar_compare_time" = "0"	# 500ns
-				register "sar_sampling_time" = "0"	# 2us
-				register "short_key_debounce" = "2"	# 100ms
-				register "jack_insert_debounce" = "7"	# 512ms
-				register "jack_eject_debounce" = "7"	# 512ms
-				device i2c 1a on
-					probe AUDIO ALC1019_NAU88L25B_I2S
-				end
-			end
-			chip drivers/generic/alc1015
-				register "hid" = ""RTL1019""
-				register "sdb" =  "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A11)"
-				device generic 1 on
-					probe AUDIO ALC1019_NAU88L25B_I2S
-				end
-			end
-			chip drivers/intel/mipi_camera
-				register "acpi_hid" = ""OVTI8856""
-				register "acpi_uid" = "0"
-				register "acpi_name" = ""CAM0""
-				register "chip_name" = ""Ov 8856 Camera""
-				register "device_type" = "INTEL_ACPI_CAMERA_SENSOR"
-
-				register "ssdb.lanes_used" = "4"
-				register "ssdb.link_used" = "0"
-				register "ssdb.vcm_type" = "0x0C"
-				register "vcm_name" = ""VCM0""
-				register "num_freq_entries" = "2"
-				register "link_freq[0]" = "360 * MHz" # 360 MHz
-				register "link_freq[1]" = "180 * MHz" # 180 MHz
-				register "remote_name" = ""IPU0""
-
-				register "has_power_resource" = "1"
-				#Controls
-				register "clk_panel.clks[0].clknum" = "IMGCLKOUT_3"
-				register "clk_panel.clks[0].freq" = "FREQ_19_2_MHZ"
-
-				register "gpio_panel.gpio[0].gpio_num" = "GPP_D15" #power_enable_2p8
-				register "gpio_panel.gpio[1].gpio_num" = "GPP_D16" #power_enable_1p2
-				register "gpio_panel.gpio[2].gpio_num" = "GPP_D3" #reset
-
-				#_ON
-				register "on_seq.ops_cnt" = "5"
-				register "on_seq.ops[0]" = "SEQ_OPS_CLK_ENABLE(0, 0)"
-				register "on_seq.ops[1]" = "SEQ_OPS_GPIO_ENABLE(0, 5)"
-				register "on_seq.ops[2]" = "SEQ_OPS_GPIO_ENABLE(1, 5)"
-				register "on_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(2, 5)"
-				register "on_seq.ops[4]" = "SEQ_OPS_GPIO_ENABLE(2, 5)"
-
-				#_OFF
-				register "off_seq.ops_cnt" = "4"
-				register "off_seq.ops[0]" = "SEQ_OPS_CLK_DISABLE(0, 0)"
-				register "off_seq.ops[1]" = "SEQ_OPS_GPIO_DISABLE(2, 0)"
-				register "off_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(1, 0)"
-				register "off_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(0, 0)"
-
-				device i2c 10 on end
-			end
-			chip drivers/intel/mipi_camera
-				register "acpi_uid" = "2"
-				register "acpi_name" = ""VCM0""
-				register "chip_name" = ""DW9768 VCM""
-				register "device_type" = "INTEL_ACPI_CAMERA_VCM"
-
-				register "pr0" = ""\\_SB.PCI0.I2C0.CAM0.PRIC""
-				register "vcm_compat" = ""dongwoon,dw9768""
-
-				device i2c 0C on end
-			end
-			chip drivers/intel/mipi_camera
-				register "acpi_uid" = "1"
-				register "acpi_name" = ""NVM0""
-				register "chip_name" = ""AT24 EEPROM""
-				register "device_type" = "INTEL_ACPI_CAMERA_NVM"
-
-				register "pr0" = ""\\_SB.PCI0.I2C0.CAM0.PRIC""
-				register "nvm_compat" = ""atmel,24c1024""
-
-				register "nvm_size" = "0x2800"
-				register "nvm_pagesize" = "0x01"
-				register "nvm_readonly" = "0x01"
-				register "nvm_width" = "0x10"
-
-				device i2c 58 on end
-			end
-		end #I2C0
-		device ref i2c1 on
-			chip drivers/i2c/hid
-				register "generic.hid" = ""ELAN9050""
-				register "generic.desc" = ""ELAN Touchscreen""
-				register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C7_IRQ)"
-				register "generic.probed" = "1"
-				register "generic.reset_gpio" =
-							"ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C1)"
-				register "generic.reset_delay_ms" = "300"
-				register "generic.reset_off_delay_ms" = "1"
-				register "generic.enable_gpio" =
-							"ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)"
-				register "generic.enable_delay_ms" = "6"
-				register "generic.stop_gpio" =
-							"ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C6)"
-				register "generic.stop_off_delay_ms" = "1"
-				register "generic.has_power_resource" = "1"
-				register "hid_desc_reg_offset" = "0x01"
-				device i2c 0x10 on end
-			end
-			chip drivers/i2c/hid
-				register "generic.hid" = ""GDIX0000""
-				register "generic.desc" = ""Goodix Touchscreen""
-				register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C7_IRQ)"
-				register "generic.probed" = "1"
-				register "generic.reset_gpio" =
-							"ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C1)"
-				register "generic.reset_delay_ms" = "120"
-				register "generic.reset_off_delay_ms" = "3"
-				register "generic.enable_gpio" =
-							"ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)"
-				register "generic.enable_delay_ms" = "12"
-				register "generic.stop_gpio" =
-							"ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C6)"
-				register "generic.stop_off_delay_ms" = "1"
-				register "generic.has_power_resource" = "1"
-				register "hid_desc_reg_offset" = "0x01"
-				device i2c 0x5d on end
-			end
-			chip drivers/i2c/hid
-				register "generic.hid" = ""SIS9815""
-				register "generic.desc" = ""SIS Touchscreen""
-				register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C7_IRQ)"
-				register "generic.probed" = "1"
-				register "generic.reset_gpio" =
-							"ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C1)"
-				register "generic.stop_gpio" =
-							"ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C6)"
-				register "generic.stop_delay_ms" = "100"
-				register "generic.enable_gpio" =
-							"ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)"
-				register "generic.enable_delay_ms" = "7"
-				register "generic.has_power_resource" = "1"
-				register "hid_desc_reg_offset" = "0x00"
-				device i2c 5c on end
-			end
-		end
-		device ref i2c2 on
-			chip drivers/i2c/sx9324
-				register "desc" = ""SAR1 Proximity Sensor""
-				register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_B3_IRQ)"
-				register "speed" = "I2C_SPEED_FAST"
-				register "uid" = "1"
-				register "reg_gnrl_ctrl0" = "0x16"
-				register "reg_gnrl_ctrl1" = "0x21"
-				register "reg_afe_ctrl0" = "0x00"
-				register "reg_afe_ctrl1" = "0x10"
-				register "reg_afe_ctrl2" = "0x00"
-				register "reg_afe_ctrl3" = "0x00"
-				register "reg_afe_ctrl4" = "0x07"
-				register "reg_afe_ctrl5" = "0x00"
-				register "reg_afe_ctrl6" = "0x00"
-				register "reg_afe_ctrl7" = "0x07"
-				register "reg_afe_ctrl8" = "0x12"
-				register "reg_afe_ctrl9" = "0x0f"
-				register "reg_prox_ctrl0" = "0x12"
-				register "reg_prox_ctrl1" = "0x12"
-				register "reg_prox_ctrl2" = "0x90"
-				register "reg_prox_ctrl3" = "0x60"
-				register "reg_prox_ctrl4" = "0x0c"
-				register "reg_prox_ctrl5" = "0x12"
-				register "reg_prox_ctrl6" = "0x3c"
-				register "reg_prox_ctrl7" = "0x58"
-				register "reg_adv_ctrl0" = "0x00"
-				register "reg_adv_ctrl1" = "0x00"
-				register "reg_adv_ctrl2" = "0x00"
-				register "reg_adv_ctrl3" = "0x00"
-				register "reg_adv_ctrl4" = "0x00"
-				register "reg_adv_ctrl5" = "0x05"
-				register "reg_adv_ctrl6" = "0x00"
-				register "reg_adv_ctrl7" = "0x00"
-				register "reg_adv_ctrl8" = "0x00"
-				register "reg_adv_ctrl9" = "0x00"
-				register "reg_adv_ctrl10" = "0x5c"
-				register "reg_adv_ctrl11" = "0x52"
-				register "reg_adv_ctrl12" = "0xb5"
-				register "reg_adv_ctrl13" = "0x00"
-				register "reg_adv_ctrl14" = "0x80"
-				register "reg_adv_ctrl15" = "0x0c"
-				register "reg_adv_ctrl16" = "0x38"
-				register "reg_adv_ctrl17" = "0x56"
-				register "reg_adv_ctrl18" = "0x33"
-				register "reg_adv_ctrl19" = "0xf0"
-				register "reg_adv_ctrl20" = "0xf0"
-				device i2c 28 on end
-			end
-			chip drivers/i2c/sx9324
-				register "desc" = ""SAR2 Proximity Sensor""
-				register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_H19_IRQ)"
-				register "speed" = "I2C_SPEED_FAST"
-				register "uid" = "2"
-				register "reg_gnrl_ctrl0" = "0x16"
-				register "reg_gnrl_ctrl1" = "0x21"
-				register "reg_afe_ctrl0" = "0x00"
-				register "reg_afe_ctrl1" = "0x10"
-				register "reg_afe_ctrl2" = "0x00"
-				register "reg_afe_ctrl3" = "0x00"
-				register "reg_afe_ctrl4" = "0x07"
-				register "reg_afe_ctrl5" = "0x00"
-				register "reg_afe_ctrl6" = "0x00"
-				register "reg_afe_ctrl7" = "0x07"
-				register "reg_afe_ctrl8" = "0x12"
-				register "reg_afe_ctrl9" = "0x0f"
-				register "reg_prox_ctrl0" = "0x12"
-				register "reg_prox_ctrl1" = "0x12"
-				register "reg_prox_ctrl2" = "0x90"
-				register "reg_prox_ctrl3" = "0x60"
-				register "reg_prox_ctrl4" = "0x0c"
-				register "reg_prox_ctrl5" = "0x12"
-				register "reg_prox_ctrl6" = "0x3c"
-				register "reg_prox_ctrl7" = "0x58"
-				register "reg_adv_ctrl0" = "0x00"
-				register "reg_adv_ctrl1" = "0x00"
-				register "reg_adv_ctrl2" = "0x00"
-				register "reg_adv_ctrl3" = "0x00"
-				register "reg_adv_ctrl4" = "0x00"
-				register "reg_adv_ctrl5" = "0x05"
-				register "reg_adv_ctrl6" = "0x00"
-				register "reg_adv_ctrl7" = "0x00"
-				register "reg_adv_ctrl8" = "0x00"
-				register "reg_adv_ctrl9" = "0x00"
-				register "reg_adv_ctrl10" = "0x5c"
-				register "reg_adv_ctrl11" = "0x52"
-				register "reg_adv_ctrl12" = "0xb5"
-				register "reg_adv_ctrl13" = "0x00"
-				register "reg_adv_ctrl14" = "0x80"
-				register "reg_adv_ctrl15" = "0x0c"
-				register "reg_adv_ctrl16" = "0x38"
-				register "reg_adv_ctrl17" = "0x56"
-				register "reg_adv_ctrl18" = "0x33"
-				register "reg_adv_ctrl19" = "0xf0"
-				register "reg_adv_ctrl20" = "0xf0"
-				device i2c 2C on end
-			end
-			chip drivers/intel/mipi_camera
-				register "acpi_hid" = ""INT3478""
-				register "acpi_uid" = "0"
-				register "acpi_name" = ""CAM1""
-				register "chip_name" = ""imx 208 Camera""
-				register "device_type" = "INTEL_ACPI_CAMERA_SENSOR"
-
-				register "ssdb.lanes_used" = "2"
-				register "ssdb.link_used" = "1"
-				register "num_freq_entries" = "2"
-				register "link_freq[0]" = "384 * MHz" # 384 MHz
-				register "link_freq[1]" = "96 * MHz" # 96 MHz
-				register "remote_name" = ""IPU0""
-
-				register "has_power_resource" = "1"
-				#Controls
-				register "gpio_panel.gpio[0].gpio_num" = "GPP_C3"  #PP3300_FCAM_X
-				register "gpio_panel.gpio[1].gpio_num" = "GPP_A17" #EN_UCAM_PWR
-				register "gpio_panel.gpio[2].gpio_num" = "GPP_F20" #reset
-				register "gpio_panel.gpio[3].gpio_num" = "GPP_H21" #CLK_EN
-
-				#_ON
-				register "on_seq.ops_cnt" = "5"
-				register "on_seq.ops[0]" = "SEQ_OPS_GPIO_ENABLE(3, 0)"
-				register "on_seq.ops[1]" = "SEQ_OPS_GPIO_ENABLE(0, 5)"
-				register "on_seq.ops[2]" = "SEQ_OPS_GPIO_ENABLE(1, 5)"
-				register "on_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(2, 5)"
-				register "on_seq.ops[4]" = "SEQ_OPS_GPIO_ENABLE(2, 5)"
-
-				#_OFF
-				register "off_seq.ops_cnt" = "4"
-				register "off_seq.ops[0]" = "SEQ_OPS_GPIO_DISABLE(3, 0)"
-				register "off_seq.ops[1]" = "SEQ_OPS_GPIO_DISABLE(2, 0)"
-				register "off_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(1, 0)"
-				register "off_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(0, 0)"
-
-				device i2c 10 on
-					probe UFC UFC_MIPI_IMX208
-				end
-			end
-			chip drivers/intel/mipi_camera
-				register "acpi_hid" = ""ACPI_DT_NAMESPACE_HID""
-				register "acpi_uid" = "1"
-				register "acpi_name" = ""NVM1""
-				register "chip_name" = ""GT24C16S""
-				register "device_type" = "INTEL_ACPI_CAMERA_NVM"
-
-				register "pr0" = ""\\_SB.PCI0.I2C2.CAM1.PRIC""
-				register "nvm_compat" = ""atmel,24c1024""
-
-				register "nvm_size" = "0x800"
-				register "nvm_pagesize" = "0x01"
-				register "nvm_readonly" = "0x01"
-				register "nvm_width" = "0x08"
-
-				device i2c 50 on
-					probe UFC UFC_MIPI_IMX208
-				end
-			end
-			chip drivers/i2c/generic
-				register "hid" = ""GOOG0020""
-				register "desc" = ""ChromeOS HPS""
-				register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_E7)"  # EN_HPS_PWR
-				register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_E3_IRQ)"  # HPS_INT_ODL
-				# HPS uses I2C addresses 0x30 and 0x51.
-				# The address we provide here is not significant because
-				# neither coreboot nor Linux have a driver for HPS,
-				# it's only used from userspace.
-				device i2c 30 on
-					probe HPS HPS_PRESENT
-				end
-			end
-		end
-		device ref i2c3 on
-			chip drivers/i2c/tpm
-				register "hid" = ""GOOG0005""
-				register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_A13_IRQ)"
-				device i2c 50 on end
-			end
-		end
-		device ref i2c5 on
-			chip drivers/i2c/generic
-				register "hid" = ""ELAN0000""
-				register "desc" = ""ELAN Touchpad""
-				register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_F14_IRQ)"
-				register "wake" = "GPE0_DW2_14"
-				register "detect" = "1"
-				device i2c 15 on end
-			end
-		end
-		device ref hda on
-			chip drivers/generic/max98357a
-				register "hid" = ""MX98357A""
-				register "sdmode_gpio" =
-						"ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A11)"
-				register "sdmode_delay" = "5"
-				device generic 0 on
-					probe AUDIO MAX98357_ALC5682I_I2S
-				end
-			end
-
-			chip drivers/intel/soundwire
-				device generic 0 on
-					probe AUDIO MAX98373_ALC5682_SNDW
-					chip drivers/soundwire/alc5682
-						# SoundWire Link 0 ID 1
-						register "desc" = ""Headset Codec""
-						device generic 0.1 on end
-					end
-					chip drivers/soundwire/max98373
-						# SoundWire Link 2 ID 3
-						register "desc" = ""Left Speaker Amp""
-						device generic 2.3 on end
-					end
-					chip drivers/soundwire/max98373
-						# SoundWire Link 2 ID 7
-						register "desc" = ""Right Speaker Amp""
-						device generic 2.7 on end
-					end
-				end
-			end
-		end
-		device ref gspi1 on
-			chip drivers/spi/acpi
-				register "name" = ""CRFP""
-				register "hid" = "ACPI_DT_NAMESPACE_HID"
-				register "uid" = "1"
-				register "compat_string" = ""google,cros-ec-spi""
-				register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_F15_IRQ)"
-				register "wake" = "GPE0_DW2_15"
-				register "has_power_resource" = "1"
-				register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D1)"
-				register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D2)"
-				register "enable_delay_ms" = "3"
-				device spi 0 on end
-			end # FPMCU
-		end
-		device ref pch_espi on
-			chip ec/google/chromeec
-				use conn0 as mux_conn[0]
-				use conn1 as mux_conn[1]
-				use conn2 as mux_conn[2]
-				device pnp 0c09.0 on end
-			end
-		end
-		device ref pmc hidden
-			chip drivers/intel/pmc_mux
-				device generic 0 on
-					chip drivers/intel/pmc_mux/conn
-						use usb2_port1 as usb2_port
-						use tcss_usb3_port1 as usb3_port
-						device generic 0 alias conn0 on end
-					end
-					chip drivers/intel/pmc_mux/conn
-						use usb2_port2 as usb2_port
-						use tcss_usb3_port2 as usb3_port
-						device generic 1 alias conn1 on end
-					end
-					chip drivers/intel/pmc_mux/conn
-						use usb2_port3 as usb2_port
-						use tcss_usb3_port3 as usb3_port
-						device generic 2 alias conn2 on end
-					end
-				end
-			end
-		end
-		device ref tcss_xhci on
-			chip drivers/usb/acpi
-				device ref tcss_root_hub on
-					chip drivers/usb/acpi
-						register "desc" = ""USB3 Type-C Port C0 (MLB)""
-						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
-						register "use_custom_pld" = "true"
-						register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, RIGHT, ACPI_PLD_GROUP(1, 1))"
-						device ref tcss_usb3_port1 on end
-					end
-					chip drivers/usb/acpi
-						register "desc" = ""USB3 Type-C Port C1 (DB)""
-						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
-						register "use_custom_pld" = "true"
-						register "custom_pld" = "ACPI_PLD_TYPE_C(RIGHT, LEFT, ACPI_PLD_GROUP(2, 1))"
-						device ref tcss_usb3_port2 on end
-					end
-					chip drivers/usb/acpi
-						register "desc" = ""USB3 Type-C Port C2 (MLB)""
-						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
-						register "use_custom_pld" = "true"
-						register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, LEFT, ACPI_PLD_GROUP(3, 1))"
-						device ref tcss_usb3_port3 on end
-					end
-				end
-			end
-		end
-		device ref xhci on
-			chip drivers/usb/acpi
-				device ref xhci_root_hub on
-					chip drivers/usb/acpi
-						register "desc" = ""USB2 Type-C Port C0 (MLB)""
-						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
-						register "use_custom_pld" = "true"
-						register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, RIGHT, ACPI_PLD_GROUP(1, 1))"
-						device ref usb2_port1 on end
-					end
-					chip drivers/usb/acpi
-						register "desc" = ""USB2 Type-C Port C1 (DB)""
-						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
-						register "use_custom_pld" = "true"
-						register "custom_pld" = "ACPI_PLD_TYPE_C(RIGHT, LEFT, ACPI_PLD_GROUP(2, 1))"
-						device ref usb2_port2 on end
-					end
-					chip drivers/usb/acpi
-						register "desc" = ""USB2 Type-C Port C2 (MLB)""
-						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
-						register "use_custom_pld" = "true"
-						register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, LEFT, ACPI_PLD_GROUP(3, 1))"
-						device ref usb2_port3 on end
-					end
-					chip drivers/usb/acpi
-						register "desc" = ""USB2 WWAN""
-						register "type" = "UPC_TYPE_INTERNAL"
-						device ref usb2_port4 on end
-					end
-					chip drivers/usb/acpi
-						register "desc" = ""USB2 Camera""
-						register "type" = "UPC_TYPE_INTERNAL"
-						device ref usb2_port6 on
-							probe UFC UFC_USB
-						end
-					end
-					chip drivers/usb/acpi
-						register "desc" = ""USB2 Type-A Port A0 (DB)""
-						register "type" = "UPC_TYPE_A"
-						register "use_custom_pld" = "true"
-						register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, RIGHT, ACPI_PLD_GROUP(1, 2))"
-						device ref usb2_port9 on end
-					end
-					chip drivers/usb/acpi
-						register "desc" = ""USB2 Bluetooth""
-						register "type" = "UPC_TYPE_INTERNAL"
-						register "reset_gpio" =
-							"ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D4)"
-						device ref usb2_port10 on end
-					end
-					chip drivers/usb/acpi
-						register "desc" = ""USB3 Type-A Port A0 (DB)""
-						register "type" = "UPC_TYPE_USB3_A"
-						register "use_custom_pld" = "true"
-						register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, RIGHT, ACPI_PLD_GROUP(1, 2))"
-						device ref usb3_port1 on end
-					end
-					chip drivers/usb/acpi
-						register "desc" = ""USB3 WWAN""
-						register "type" = "UPC_TYPE_INTERNAL"
-						device ref usb3_port4 on end
-					end
-				end
-			end
-		end
-	end
-end
diff --git a/src/mainboard/google/brya/variants/brya4es/ramstage.c b/src/mainboard/google/brya/variants/brya4es/ramstage.c
deleted file mode 100644
index 970c628f50..0000000000
--- a/src/mainboard/google/brya/variants/brya4es/ramstage.c
+++ /dev/null
@@ -1,20 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-
-#include <baseboard/variants.h>
-#include <device/pci_ids.h>
-
-const struct cpu_power_limits limits[] = {
-	/* SKU_ID, TDP (Watts), pl1_min, pl1_max, pl2_min, pl2_max, pl4 */
-	/* All values are for baseline config as per bug:191906315 comment #10 */
-	{ PCI_DID_INTEL_ADL_P_ID_7, 15, 3000, 15000, 39000, 39000, 100000 },
-	{ PCI_DID_INTEL_ADL_P_ID_6, 15, 3000, 15000, 39000, 39000, 100000 },
-	{ PCI_DID_INTEL_ADL_P_ID_5, 28, 4000, 28000, 43000, 43000, 105000 },
-	{ PCI_DID_INTEL_ADL_P_ID_3, 28, 4000, 28000, 43000, 43000, 105000 },
-	{ PCI_DID_INTEL_ADL_P_ID_3, 45, 5000, 45000, 80000, 80000, 159000 },
-};
-
-void variant_devtree_update(void)
-{
-	size_t total_entries = ARRAY_SIZE(limits);
-	variant_update_power_limits(limits, total_entries);
-}
diff --git a/src/mainboard/google/brya/variants/brya4es/variant.c b/src/mainboard/google/brya/variants/brya4es/variant.c
deleted file mode 100644
index e9ae51ea0f..0000000000
--- a/src/mainboard/google/brya/variants/brya4es/variant.c
+++ /dev/null
@@ -1,11 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-
-#include <chip.h>
-#include <fw_config.h>
-#include <baseboard/variants.h>
-
-void variant_update_soc_chip_config(struct soc_intel_alderlake_config *config)
-{
-	config->cnvi_bt_audio_offload = fw_config_probe(FW_CONFIG(AUDIO,
-							MAX98373_ALC5682_SNDW));
-}