diff options
| author | Ren Kuo <ren.kuo@quanta.corp-partner.google.com> | 2022-10-28 13:01:22 +0800 |
|---|---|---|
| committer | Eric Lai <eric_lai@quanta.corp-partner.google.com> | 2022-11-07 01:24:45 +0000 |
| commit | 6ec48057d0f64c4595758df166dc80fb4ae84ba2 (patch) | |
| tree | c9a72608af89ec6a5da1fc51f82ff830491d3fdd /src/mainboard/google/brya/variants | |
| parent | 27802bb7b20656f0c4c083a301b9bd6af131a19c (diff) | |
mb/google/brya/variants/volmar: Add firmware config field for FPMCU
The fingerprint(FP) feature is only for volmar,and it's not for zavala.
Add FPMCU_MASK field in fw_config to disable the FP function for
zavala, and reserve FP function for shipped volmar.
Define the value as following:
field FPMCU_MASK 10
option FPMCU_ENABLED 0
option FPMCU_DISABLED 1
end
BUG=b:250807253
TEST=build firmware and verify the fp function in volmar DUT.
write `disable=1` and 'enable=0' in FPCMU_MASK field.
check the fp function and run `ectool --name cros_fp version`
It works as expected.
Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Change-Id: I867771904811459697056662d5e29c545a1a9474
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68917
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Diffstat (limited to 'src/mainboard/google/brya/variants')
| -rw-r--r-- | src/mainboard/google/brya/variants/volmar/overridetree.cb | 8 | ||||
| -rw-r--r-- | src/mainboard/google/brya/variants/volmar/variant.c | 4 |
2 files changed, 11 insertions, 1 deletions
diff --git a/src/mainboard/google/brya/variants/volmar/overridetree.cb b/src/mainboard/google/brya/variants/volmar/overridetree.cb index ce5cbdaf81..056467c978 100644 --- a/src/mainboard/google/brya/variants/volmar/overridetree.cb +++ b/src/mainboard/google/brya/variants/volmar/overridetree.cb @@ -19,6 +19,10 @@ fw_config option BOOT_EMMC_DISABLED 0 option BOOT_EMMC_ENABLED 1 end + field FPMCU_MASK 10 + option FPMCU_ENABLED 0 + option FPMCU_DISABLED 1 + end end chip soc/intel/alderlake register "sagv" = "SaGv_Enabled" @@ -321,7 +325,9 @@ chip soc/intel/alderlake register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D1)" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D2)" register "enable_delay_ms" = "3" - device spi 0 on end + device spi 0 on + probe FPMCU_MASK FPMCU_ENABLED + end end # FPMCU end device ref pch_espi on diff --git a/src/mainboard/google/brya/variants/volmar/variant.c b/src/mainboard/google/brya/variants/volmar/variant.c index 86c65c7ea7..d1ef1fa645 100644 --- a/src/mainboard/google/brya/variants/volmar/variant.c +++ b/src/mainboard/google/brya/variants/volmar/variant.c @@ -14,4 +14,8 @@ void variant_update_soc_chip_config(struct soc_intel_alderlake_config *config) { config->cnvi_bt_audio_offload = fw_config_probe(FW_CONFIG(AUDIO, MAX98373_NAU88L25B_I2S)); + + if (fw_config_probe(FW_CONFIG(FPMCU_MASK, FPMCU_DISABLED))) + config->serial_io_gspi_mode[PchSerialIoIndexGSPI1] = PchSerialIoDisabled; + } |