mb/google/brox/var/greenbayupoc: Update devicetree and gpio settings

Based on latest schematics GREENBAY_0412.SCH update the gpio and
devicetree settings.

BUG=b:326413034
TEST=emerge-brox coreboot chromeos-bootimage, flash and boot on DUT

Cq-Depend:chrome-internal:7218819
Change-Id: I59f25b8abb7dd8a2dff7ff567b231bddc9db8455
Signed-off-by: Eren Peng <peng.eren@inventec.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82093
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>

5 files changed, 372 insertions, 3 deletions

diff --git a/src/mainboard/google/brox/variants/greenbayupoc/Makefile.mk b/src/mainboard/google/brox/variants/greenbayupoc/Makefile.mk
index be05cd4e5c..a5ee3624fd 100644
--- a/src/mainboard/google/brox/variants/greenbayupoc/Makefile.mk
+++ b/src/mainboard/google/brox/variants/greenbayupoc/Makefile.mk
@@ -1,3 +1,8 @@
 ## SPDX-License-Identifier: GPL-2.0-only
 
+bootblock-y += gpio.c
+romstage-y += gpio.c
 romstage-y += memory.c
+ramstage-$(CONFIG_FW_CONFIG) += variant.c
+ramstage-y += gpio.c
+ramstage-y += ramstage.c
diff --git a/src/mainboard/google/brox/variants/greenbayupoc/gpio.c b/src/mainboard/google/brox/variants/greenbayupoc/gpio.c
new file mode 100644
index 0000000000..f26f098e9d
--- /dev/null
+++ b/src/mainboard/google/brox/variants/greenbayupoc/gpio.c
@@ -0,0 +1,139 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+/*
+ * This header block is used to supply information to arbitrage, a
+ * google-internal tool. Updating it incorrectly will lead to issues,
+ * so please don't update it unless a change is specifically required.
+ * BaseID: E3110FFB1FCDA587
+ * Overrides: None
+ */
+
+#include <baseboard/gpio.h>
+#include <baseboard/variants.h>
+#include <commonlib/helpers.h>
+#include <soc/gpio.h>
+
+/* Pad configuration in ramstage */
+static const struct pad_config override_gpio_table[] = {
+	/* GPP_A18 : [NF1: DDSP_HPDB NF4: DISP_MISCB NF6: USB_C_GPP_A18] ==> NC */
+	PAD_NC(GPP_A18, NONE),
+	/* GPP_A19 : [NF1: DDSP_HPD1 NF4: DISP_MISC1 NF6: USB_C_GPP_A19] ==> NC */
+	PAD_NC(GPP_A19, NONE),
+	/* GPP_A20 : [NF1: DDSP_HPD2 NF4: DISP_MISC2 NF6: USB_C_GPP_A20] ==> NC */
+	PAD_NC(GPP_A20, NONE),
+
+	/* GPP_C0 : [NF1: SMBCLK NF6: USB_C_GPP_C0] ==> SMBCLK */
+	PAD_CFG_NF(GPP_C0, NONE, DEEP, NF1),
+	/* GPP_C1 : [NF1: SMBDATA NF6: USB_C_GPP_C1] ==> SMBDATA */
+	PAD_CFG_NF(GPP_C1, NONE, DEEP, NF1),
+
+	/* GPP_D9 : [NF1: ISH_SPI_CS# NF2: DDP3_CTRLCLK NF4: TBT_LSX2_TXD NF5: BSSB_LS2_RX
+	 * NF6: USB_C_GPP_D9 NF7: GSPI2_CS0#] ==> NC */
+	PAD_NC(GPP_D9, NONE),
+	/* GPP_D10 : [NF1: ISH_SPI_CLK NF2: DDP3_CTRLDATA NF4: TBT_LSX2_RXD NF5: BSSB_LS2_TX
+	 * NF6: USB_C_GPP_D10 NF7: GSPI2_CLK] ==> NC */
+	PAD_NC(GPP_D10, NONE),
+
+	/* GPP_E4 : [NF1: DEVSLP0 NF6: USB_C_GPP_E4 NF7: SRCCLK_OE9#] ==> NC */
+	PAD_NC(GPP_E4, NONE),
+
+	/* GPP_E10 : THC0_SPI1_CS_L/GSPI0_CS0_L ==> NC */
+	PAD_NC(GPP_E10, NONE),
+	/* GPP_E12 : THC0_SPI1_IO1/I2C0A_SDA/GSPI0_MISO ==> NC */
+	PAD_NC(GPP_E12, NONE),
+	/* GPP_E13 : THC0_SPI1_IO0/I2C0A_SCL/GSPI0_MOSI ==> NC */
+	PAD_NC(GPP_E13, NONE),
+	/* GPP_E15 : SRCCLK_OE8_L ==> NC */
+	PAD_NC(GPP_E15, NONE),
+
+	/* GPP_H15 : [NF1: DDPB_CTRLCLK NF3: PCIE_LINK_DOWN NF6: USB_C_GPP_H15] ==> NC */
+	PAD_NC(GPP_H15, NONE),
+	/* GPP_H17 : [NF1: DDPB_CTRLDATA NF6: USB_C_GPP_H17] ==> NC */
+	PAD_NC(GPP_H17, NONE),
+
+	/* GPP_S0 : SNDW0_CLL/I2S1_SCLK ==> NC */
+	PAD_NC(GPP_S0, NONE),
+};
+
+/* Early pad configuration in bootblock */
+static const struct pad_config early_gpio_table[] = {
+	/* GPP_D11 : [] ==> EN_PP3300_SSD (NC) */
+	PAD_NC(GPP_D11, NONE),
+	/* GPP_E2  : THC0_SPI1_IO3 ==> GSC_PCH_INT_ODL */
+	PAD_CFG_GPI_APIC_LOCK(GPP_E2, NONE, LEVEL, INVERT, LOCK_CONFIG),
+	/* GPP_E8 : GPP_E8 ==> PCH_WP_OD */
+	PAD_CFG_GPI_LOCK(GPP_E8, NONE, LOCK_CONFIG),
+	/* GPP_F9 : [NF1: BOOTMPC NF6: USB_C_GPP_F9] ==> SSD_PERST_L */
+	PAD_CFG_GPO(GPP_F9, 0, DEEP),
+	/* F21 : EXT_PWR_GATE2# ==> NC */
+	PAD_NC(GPP_F21, NONE),
+	/* GPP_H8 : [NF1: I2C4_SDA NF2: CNV_MFUART2_RXD NF6: USB_C_GPP_H8] ==> PCH_I2C_GSC_SDA */
+	PAD_CFG_NF(GPP_H8, NONE, DEEP, NF1),
+	/* GPP_H9 : [NF1: I2C4_SCL NF2: CNV_MFUART2_TXD] ==> PCH_I2C_GSC_SCL */
+	PAD_CFG_NF(GPP_H9, NONE, DEEP, NF1),
+	/* H10 : UART0_RXD ==> UART_PCH_RX_DBG_TX */
+	PAD_CFG_NF(GPP_H10, NONE, PLTRST, NF2),
+	/* H11 : UART0_TXD ==> UART_PCH_TX_DBG_RX */
+	PAD_CFG_NF(GPP_H11, NONE, PLTRST, NF2),
+	/* GPP_S0 : SNDW0_CLL/I2S1_SCLK ==> NC */
+	PAD_NC(GPP_S0, NONE),
+
+	/* CPU PCIe VGPIO for PEG60 */
+	PAD_CFG_NF_VWEN(GPP_vGPIO_PCIE_48, NONE, PLTRST, NF1),
+	PAD_CFG_NF_VWEN(GPP_vGPIO_PCIE_49, NONE, PLTRST, NF1),
+	PAD_CFG_NF_VWEN(GPP_vGPIO_PCIE_50, NONE, PLTRST, NF1),
+	PAD_CFG_NF_VWEN(GPP_vGPIO_PCIE_51, NONE, PLTRST, NF1),
+	PAD_CFG_NF_VWEN(GPP_vGPIO_PCIE_52, NONE, PLTRST, NF1),
+	PAD_CFG_NF_VWEN(GPP_vGPIO_PCIE_53, NONE, PLTRST, NF1),
+	PAD_CFG_NF_VWEN(GPP_vGPIO_PCIE_54, NONE, PLTRST, NF1),
+	PAD_CFG_NF_VWEN(GPP_vGPIO_PCIE_55, NONE, PLTRST, NF1),
+	PAD_CFG_NF_VWEN(GPP_vGPIO_PCIE_56, NONE, PLTRST, NF1),
+	PAD_CFG_NF_VWEN(GPP_vGPIO_PCIE_57, NONE, PLTRST, NF1),
+	PAD_CFG_NF_VWEN(GPP_vGPIO_PCIE_58, NONE, PLTRST, NF1),
+	PAD_CFG_NF_VWEN(GPP_vGPIO_PCIE_59, NONE, PLTRST, NF1),
+	PAD_CFG_NF_VWEN(GPP_vGPIO_PCIE_60, NONE, PLTRST, NF1),
+	PAD_CFG_NF_VWEN(GPP_vGPIO_PCIE_61, NONE, PLTRST, NF1),
+	PAD_CFG_NF_VWEN(GPP_vGPIO_PCIE_62, NONE, PLTRST, NF1),
+	PAD_CFG_NF_VWEN(GPP_vGPIO_PCIE_63, NONE, PLTRST, NF1),
+	PAD_CFG_NF_VWEN(GPP_vGPIO_PCIE_76, NONE, PLTRST, NF1),
+	PAD_CFG_NF_VWEN(GPP_vGPIO_PCIE_77, NONE, PLTRST, NF1),
+	PAD_CFG_NF_VWEN(GPP_vGPIO_PCIE_78, NONE, PLTRST, NF1),
+	PAD_CFG_NF_VWEN(GPP_vGPIO_PCIE_79, NONE, PLTRST, NF1),
+};
+
+static const struct pad_config romstage_gpio_table[] = {
+	/* GPP_E10 : THC0_SPI1_CS_L/GSPI0_CS0_L ==> NC */
+	PAD_NC(GPP_E10, NONE),
+	/* GPP_E12 : THC0_SPI1_IO1/I2C0A_SDA/GSPI0_MISO ==> NC */
+	PAD_NC(GPP_E12, NONE),
+	/* GPP_E13 : THC0_SPI1_IO0/I2C0A_SCL/GSPI0_MOSI ==> NC */
+	PAD_NC(GPP_E13, NONE),
+	/* GPP_E15 : SRCCLK_OE8_L ==> NC */
+	PAD_NC(GPP_E15, NONE),
+	/* GPP_F7 : [NF6: USB_C_GPP_F7] ==> EN_PP3300_TCHSCR */
+	PAD_CFG_GPO(GPP_F7, 1, PLTRST),
+	/* GPP_F9 : [NF1: BOOTMPC NF6: USB_C_GPP_F9] ==> SSD_PERST_L */
+	PAD_CFG_GPO(GPP_F9, 1, DEEP),
+	/* GPP_F17 : [NF3: THC1_SPI2_RST# NF6: USB_C_GPP_F17] ==> TCHSCR_RST_L */
+	PAD_CFG_GPO(GPP_F17, 0, DEEP),
+	/* GPP_S0 : SNDW0_CLL/I2S1_SCLK ==> NC */
+	PAD_NC(GPP_S0, NONE),
+};
+
+const struct pad_config *variant_gpio_override_table(size_t *num)
+{
+	*num = ARRAY_SIZE(override_gpio_table);
+	return override_gpio_table;
+}
+
+const struct pad_config *variant_early_gpio_table(size_t *num)
+{
+	*num = ARRAY_SIZE(early_gpio_table);
+	return early_gpio_table;
+}
+
+const struct pad_config *variant_romstage_gpio_table(size_t *num)
+{
+	*num = ARRAY_SIZE(romstage_gpio_table);
+	return romstage_gpio_table;
+}
diff --git a/src/mainboard/google/brox/variants/greenbayupoc/overridetree.cb b/src/mainboard/google/brox/variants/greenbayupoc/overridetree.cb
index aeb4de594b..1939325e44 100644
--- a/src/mainboard/google/brox/variants/greenbayupoc/overridetree.cb
+++ b/src/mainboard/google/brox/variants/greenbayupoc/overridetree.cb
@@ -1,14 +1,201 @@
 fw_config
-	field STORAGE 0 1
+	field RETIMER 0 1
+		option RETIMER_UNKNOWN			0
+		option RETIMER_BYPASS			1
+	end
+	field STORAGE 2 3
 		option STORAGE_UNKNOWN			0
-		option STORAGE_UFS			1
-		option STORAGE_NVME			2
+		option STORAGE_NVME			1
+		option STORAGE_UFS			2
+	end
+	field WIFI 4
+		option WIFI_CNVI_WIFI			0
+		option WIFI_BT_PCIE			1
+	end
+	field UFC 5
+		option UFC_NONE				0
+		option UFC_USB				1
+	end
+	field AUDIO 6 7
+		option AUDIO_UNKNOWN			0
+		option AUDIO_REALTEK_ALC3247		1
 	end
 end
 
 chip soc/intel/alderlake
+	register "usb3_ports[0]" = "USB3_PORT_EMPTY"			# Disable UDB3 Port
+	register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC1)"		# Type-A port A0(DCI)
 
 	device domain 0 on
+		device ref igpu on
+			chip drivers/gfx/generic
+				register "device_count" = "6"
+				# DDIA for eDP
+				register "device[0].name" = ""LCD0""
+				register "device[0].type" = "panel"
+				# DDIB for HDMI
+				# If HDMI is not enumerated in the kernel, then no GFX device should be added for DDIB
+				register "device[1].name" = ""DD01""
+				# TCP0 (DP-1) for port C0
+				register "device[2].name" = ""DD02""
+				register "device[2].use_pld" = "true"
+				register "device[2].pld" = "ACPI_PLD_TYPE_C(LEFT, LEFT, ACPI_PLD_GROUP(1, 1))"
+				# TCP1 (DP-2) is unused for any ports but still enumerated in the kernel, so GFX device is added for TCP1
+				register "device[3].name" = ""DD03""
+				# TCP2 (DP-3) for port C2
+				register "device[4].name" = ""DD04""
+				register "device[4].use_pld" = "true"
+				register "device[4].pld" = "ACPI_PLD_TYPE_C(LEFT, RIGHT, ACPI_PLD_GROUP(2, 1))"
+				# TCP3 (DP-4) is unused for any ports but still enumerated in the kernel, so GFX device is added for TCP3
+				register "device[5].name" = ""DD05""
+				device generic 0 on end
+			end
+		end # Integrated Graphics Device
+		device ref pch_espi on
+			chip ec/google/chromeec
+				use conn0 as mux_conn[0]
+				use conn1 as mux_conn[1]
+				device pnp 0c09.0 on end
+			end
+		end
+		device ref pmc hidden
+			chip drivers/intel/pmc_mux
+				device generic 0 on
+					chip drivers/intel/pmc_mux/conn
+						use usb2_port1 as usb2_port
+						use tcss_usb3_port1 as usb3_port
+						device generic 0 alias conn0 on end
+					end
+					chip drivers/intel/pmc_mux/conn
+						use usb2_port3 as usb2_port
+						use tcss_usb3_port3 as usb3_port
+						device generic 1 alias conn1 on end
+					end
+				end
+			end
+		end
+		device ref tcss_xhci on
+			chip drivers/usb/acpi
+				device ref tcss_root_hub on
+					chip drivers/usb/acpi
+						register "desc" = ""USB3 Type-C Port C0 (MLB)""
+						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
+						register "use_custom_pld" = "true"
+						register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, LEFT, ACPI_PLD_GROUP(1, 1))"
+						device ref tcss_usb3_port1 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB3 Type-C Port C2 (MLB)""
+						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
+						register "use_custom_pld" = "true"
+						register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, RIGHT, ACPI_PLD_GROUP(2, 1))"
+						device ref tcss_usb3_port3 on end
+					end
+				end
+			end
+		end
+		device ref xhci on
+			chip drivers/usb/acpi
+				device ref xhci_root_hub on
+					chip drivers/usb/acpi
+						register "desc" = ""USB2 Type-C Port C0 (MLB)""
+						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
+						register "use_custom_pld" = "true"
+						register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, LEFT, ACPI_PLD_GROUP(1, 1))"
+						device ref usb2_port1 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB2 Type-C Port C2 (MLB)""
+						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
+						register "use_custom_pld" = "true"
+						register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, RIGHT, ACPI_PLD_GROUP(2, 1))"
+						device ref usb2_port3 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB2 Camera""
+						register "type" = "UPC_TYPE_INTERNAL"
+						register "has_power_resource" = "1"
+						register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_E7)"
+						device ref usb2_port6 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB2 Type-A Port A1 (DB)""
+						register "type" = "UPC_TYPE_A"
+						register "use_custom_pld" = "true"
+						register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, LEFT, ACPI_PLD_GROUP(3, 1))"
+						device ref usb2_port7 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB2 Type-A Port A0 (DCI)""
+						register "type" = "UPC_TYPE_A"
+						register "use_custom_pld" = "true"
+						register "custom_pld" = "ACPI_PLD_TYPE_A(LEFT, LEFT, ACPI_PLD_GROUP(4, 1))"
+						device ref usb2_port9 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB2 Bluetooth""
+						register "type" = "UPC_TYPE_INTERNAL"
+						register "has_power_resource" = "1"
+						register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_A13)"
+						device ref usb2_port10 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB3 Type-A Port A0 (DCI)""
+						register "type" = "UPC_TYPE_USB3_A"
+						register "use_custom_pld" = "true"
+						register "custom_pld" = "ACPI_PLD_TYPE_A(LEFT, LEFT, ACPI_PLD_GROUP(4, 1))"
+						device ref usb3_port2 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB3 Type-A Port A1 (DB)""
+						register "type" = "UPC_TYPE_USB3_A"
+						register "use_custom_pld" = "true"
+						register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, LEFT, ACPI_PLD_GROUP(3, 1))"
+						device ref usb3_port3 on end
+					end
+				end
+			end
+		end
+		device ref pcie4_0 on
+			# Enable CPU PCIE RP 1 using CLK 3
+			register "cpu_pcie_rp[CPU_RP(1)]" = "{
+				.clk_req = 3,
+				.clk_src = 3,
+				.flags = PCIE_RP_LTR | PCIE_RP_AER,
+			}"
+			probe STORAGE STORAGE_NVME
+			probe STORAGE STORAGE_UNKNOWN
+		end
+		device ref pcie_rp5 on
+			register "pch_pcie_rp[PCH_RP(5)]" = "{
+				.clk_src = 1,
+				.clk_req = 1,
+				.flags = PCIE_RP_LTR | PCIE_RP_AER,
+			}"
+			chip drivers/wifi/generic
+				register "wake" = "GPE0_DW0_03"
+				register "add_acpi_dma_property" = "true"
+				device pci 00.0 on
+					probe WIFI WIFI_BT_PCIE
+				end
+			end
+			chip soc/intel/common/block/pcie/rtd3
+				# enable_gpio is controlled by the EC with EC_EN_PP3300_WLAN
+				register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_H2)"
+				register "srcclk_pin" = "1"
+				device generic 0 on end
+			end
+			probe WIFI WIFI_BT_PCIE
+		end
+		device ref cnvi_wifi on
+			chip drivers/wifi/generic
+				register "wake" = "GPE0_PME_B0"
+				register "add_acpi_dma_property" = "true"
+				register "enable_cnvi_ddr_rfim" = "true"
+				device generic 0 on end
+			end
+			probe WIFI WIFI_CNVI_WIFI
+		end
 		device ref smbus on end
 	end
 
diff --git a/src/mainboard/google/brox/variants/greenbayupoc/ramstage.c b/src/mainboard/google/brox/variants/greenbayupoc/ramstage.c
new file mode 100644
index 0000000000..b468320356
--- /dev/null
+++ b/src/mainboard/google/brox/variants/greenbayupoc/ramstage.c
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+#include <baseboard/variants.h>
+#include <device/pci_ids.h>
+
+const struct cpu_power_limits limits[] = {
+	/* SKU_ID, TDP (Watts), pl1_min, pl1_max, pl2_min, pl2_max, pl4 */
+	/* All values are for performance config as per document #686872 */
+	{ PCI_DID_INTEL_RPL_P_ID_1, 45, 18000, 45000, 115000, 115000, 210000 },
+	{ PCI_DID_INTEL_RPL_P_ID_2, 28, 10000, 28000,  64000,  64000, 126000 },
+	{ PCI_DID_INTEL_RPL_P_ID_3, 15,  6000, 15000,  55000,  55000, 114000 },
+};
+
+void variant_devtree_update(void)
+{
+	size_t total_entries = ARRAY_SIZE(limits);
+	variant_update_power_limits(limits, total_entries);
+}
diff --git a/src/mainboard/google/brox/variants/greenbayupoc/variant.c b/src/mainboard/google/brox/variants/greenbayupoc/variant.c
new file mode 100644
index 0000000000..9452ad0eb9
--- /dev/null
+++ b/src/mainboard/google/brox/variants/greenbayupoc/variant.c
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <assert.h>
+#include <baseboard/variants.h>
+#include <chip.h>
+#include <fw_config.h>
+#include <sar.h>
+
+void variant_update_soc_chip_config(struct soc_intel_alderlake_config *config)
+{
+	if (fw_config_probe(FW_CONFIG(WIFI, WIFI_CNVI_WIFI))) {
+		printk(BIOS_INFO, "CNVi bluetooth enabled by fw_config\n");
+		config->cnvi_bt_core = true;
+	}
+}
+
+const char *get_wifi_sar_cbfs_filename(void)
+{
+	return get_wifi_sar_fw_config_filename(FW_CONFIG_FIELD(WIFI));
+}