Add CONFIG_GENERATE_* for tables so that the user can select which tables not

to build, but by default all the tables that are available are built.

Make PIRQ table build for qemu.

Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Peter Stuge <peter@stuge.se>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4778 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

10 files changed, 34 insertions, 35 deletions

diff --git a/src/mainboard/gigabyte/ga-6bxc/Config.lb b/src/mainboard/gigabyte/ga-6bxc/Config.lb
index c6d1ab1fae..dcd4c79f7b 100644
--- a/src/mainboard/gigabyte/ga-6bxc/Config.lb
+++ b/src/mainboard/gigabyte/ga-6bxc/Config.lb
@@ -25,7 +25,7 @@ default CONFIG_XIP_ROM_BASE = 0xffffffff - CONFIG_XIP_ROM_SIZE + 1
 
 arch i386 end
 driver mainboard.o
-if CONFIG_HAVE_PIRQ_TABLE
+if CONFIG_GENERATE_PIRQ_TABLE
 	object irq_tables.o
 end
 makerule ./failover.E
diff --git a/src/mainboard/gigabyte/ga-6bxc/Options.lb b/src/mainboard/gigabyte/ga-6bxc/Options.lb
index 414611f7a9..8189979485 100644
--- a/src/mainboard/gigabyte/ga-6bxc/Options.lb
+++ b/src/mainboard/gigabyte/ga-6bxc/Options.lb
@@ -18,8 +18,8 @@
 ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
 ##
 
-uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_HAVE_PIRQ_TABLE
+uses CONFIG_GENERATE_MP_TABLE
+uses CONFIG_GENERATE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
 uses CONFIG_HAVE_HARD_RESET
@@ -45,7 +45,7 @@ uses CONFIG_ROMBASE
 uses CONFIG_RAMBASE
 uses CONFIG_XIP_ROM_SIZE
 uses CONFIG_XIP_ROM_BASE
-uses CONFIG_HAVE_MP_TABLE
+uses CONFIG_GENERATE_MP_TABLE
 uses CONFIG_CROSS_COMPILE
 uses CC
 uses HOSTCC
@@ -65,11 +65,11 @@ uses CONFIG_PCI_ROM_RUN
 
 default CONFIG_ROM_SIZE = 256 * 1024
 default CONFIG_HAVE_FALLBACK_BOOT = 1
-default CONFIG_HAVE_MP_TABLE = 0
+default CONFIG_GENERATE_MP_TABLE = 0
 default CONFIG_HAVE_HARD_RESET = 0
 default CONFIG_UDELAY_TSC = 1
 default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1
-default CONFIG_HAVE_PIRQ_TABLE = 1
+default CONFIG_GENERATE_PIRQ_TABLE = 1
 default CONFIG_IRQ_SLOT_COUNT = 6		# Override this in targets/*/Config.lb.
 default CONFIG_MAINBOARD_VENDOR = "N/A"	# Override this in targets/*/Config.lb.
 default CONFIG_MAINBOARD_PART_NUMBER = "N/A"	# Override this in targets/*/Config.lb.
diff --git a/src/mainboard/gigabyte/ga_2761gxdk/Config.lb b/src/mainboard/gigabyte/ga_2761gxdk/Config.lb
index 104ace034d..1cb39c685d 100644
--- a/src/mainboard/gigabyte/ga_2761gxdk/Config.lb
+++ b/src/mainboard/gigabyte/ga_2761gxdk/Config.lb
@@ -35,8 +35,8 @@ driver mainboard.o
 #needed by irq_tables and mptable and acpi_tables
 object get_bus_conf.o
 
-if CONFIG_HAVE_MP_TABLE object mptable.o end
-if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end
+if CONFIG_GENERATE_MP_TABLE object mptable.o end
+if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
 #object reset.o
 
 	if CONFIG_USE_INIT
diff --git a/src/mainboard/gigabyte/ga_2761gxdk/Kconfig b/src/mainboard/gigabyte/ga_2761gxdk/Kconfig
index a0f601bb0a..8726f685f9 100644
--- a/src/mainboard/gigabyte/ga_2761gxdk/Kconfig
+++ b/src/mainboard/gigabyte/ga_2761gxdk/Kconfig
@@ -7,11 +7,10 @@ config BOARD_GIGABYTE_GA_2761GXDK
 	select NORTHBRIDGE_AMD_AMDK8_ROOT_COMPLEX
 	select SOUTHBRIDGE_SIS_SIS966
 	select SUPERIO_ITE_IT8716F
-	select PIRQ_TABLE
+	select HAVE_PIRQ_TABLE
 	select USE_PRINTK_IN_CAR
 	select USE_DCACHE_RAM
 	select HAVE_HARD_RESET
-	select HAVE_HIGH_TABLES
 	select IOAPIC
 	select MEM_TRAIN_SEQ
 	select SB_HT_CHAIN_UNITID_OFFSET_ONLY
diff --git a/src/mainboard/gigabyte/ga_2761gxdk/Makefile.inc b/src/mainboard/gigabyte/ga_2761gxdk/Makefile.inc
index 8b29eba388..1130d0711b 100644
--- a/src/mainboard/gigabyte/ga_2761gxdk/Makefile.inc
+++ b/src/mainboard/gigabyte/ga_2761gxdk/Makefile.inc
@@ -23,8 +23,8 @@ driver-y +=  mainboard.o
 
 #needed by irq_tables and mptable and acpi_tables
 obj-y += get_bus_conf.o
-obj-$(CONFIG_HAVE_MP_TABLE) += mptable.o
-obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o
+obj-$(CONFIG_GENERATE_MP_TABLE) += mptable.o
+obj-$(CONFIG_GENERATE_PIRQ_TABLE) += irq_tables.o
 obj-$(CONFIG_USE_INIT) += cache_as_ram_auto.o
 obj-$(CONFIG_AP_CODE_IN_CAR) += apc_auto.o
 
diff --git a/src/mainboard/gigabyte/ga_2761gxdk/Options.lb b/src/mainboard/gigabyte/ga_2761gxdk/Options.lb
index aa533eebc4..2c18f9da2a 100644
--- a/src/mainboard/gigabyte/ga_2761gxdk/Options.lb
+++ b/src/mainboard/gigabyte/ga_2761gxdk/Options.lb
@@ -21,9 +21,9 @@
 ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
 ##
 
-uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_HAVE_PIRQ_TABLE
-uses CONFIG_HAVE_ACPI_TABLES
+uses CONFIG_GENERATE_MP_TABLE
+uses CONFIG_GENERATE_PIRQ_TABLE
+uses CONFIG_GENERATE_ACPI_TABLES
 uses CONFIG_HAVE_ACPI_RESUME
 uses CONFIG_ACPI_SSDTX_NUM
 uses CONFIG_USE_FALLBACK_IMAGE
@@ -151,17 +151,17 @@ default CONFIG_HAVE_HARD_RESET=1
 ##
 ## Build code to export a programmable irq routing table
 ##
-default CONFIG_HAVE_PIRQ_TABLE=1
+default CONFIG_GENERATE_PIRQ_TABLE=1
 default CONFIG_IRQ_SLOT_COUNT=11
 
 ##
 ## Build code to export an x86 MP table
 ## Useful for specifying IRQ routing values
 ##
-default CONFIG_HAVE_MP_TABLE=0
+default CONFIG_GENERATE_MP_TABLE=0
 
 ## ACPI tables will be included
-default CONFIG_HAVE_ACPI_TABLES=0
+default CONFIG_GENERATE_ACPI_TABLES=0
 
 ##
 ## Build code to export a CMOS option table
diff --git a/src/mainboard/gigabyte/m57sli/Config.lb b/src/mainboard/gigabyte/m57sli/Config.lb
index d3289427c0..6d5a13fb5c 100644
--- a/src/mainboard/gigabyte/m57sli/Config.lb
+++ b/src/mainboard/gigabyte/m57sli/Config.lb
@@ -33,8 +33,8 @@ driver mainboard.o
 #needed by irq_tables and mptable and acpi_tables
 object get_bus_conf.o
 
-if CONFIG_HAVE_MP_TABLE object mptable.o end
-if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end
+if CONFIG_GENERATE_MP_TABLE object mptable.o end
+if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
 #object reset.o
 
 	if CONFIG_USE_INIT	
@@ -166,7 +166,7 @@ end
 ##
 ## ACPI Support
 ##
-if CONFIG_HAVE_ACPI_TABLES
+if CONFIG_GENERATE_ACPI_TABLES
 	object acpi_tables.o
 	makerule dsdt.c
 		depends "$(CONFIG_MAINBOARD)/dsdt.asl"
diff --git a/src/mainboard/gigabyte/m57sli/Kconfig b/src/mainboard/gigabyte/m57sli/Kconfig
index b67a792663..45359cb5e6 100644
--- a/src/mainboard/gigabyte/m57sli/Kconfig
+++ b/src/mainboard/gigabyte/m57sli/Kconfig
@@ -8,11 +8,11 @@ config BOARD_GIGABYTE_M57SLI
 	select NORTHBRIDGE_AMD_AMDK8_ROOT_COMPLEX
 	select SOUTHBRIDGE_NVIDIA_MCP55
 	select SUPERIO_ITE_IT8716F
-	select PIRQ_TABLE
+	select HAVE_PIRQ_TABLE
+	select HAVE_MP_TABLE
 	select USE_PRINTK_IN_CAR
 	select USE_DCACHE_RAM
 	select HAVE_HARD_RESET
-	select HAVE_HIGH_TABLES
 	select IOAPIC
 	select MEM_TRAIN_SEQ
 	select SB_HT_CHAIN_UNITID_OFFSET_ONLY
diff --git a/src/mainboard/gigabyte/m57sli/Makefile.inc b/src/mainboard/gigabyte/m57sli/Makefile.inc
index 53f03d0278..62b7fd7a6e 100644
--- a/src/mainboard/gigabyte/m57sli/Makefile.inc
+++ b/src/mainboard/gigabyte/m57sli/Makefile.inc
@@ -23,12 +23,12 @@ driver-y +=  mainboard.o
 
 #needed by irq_tables and mptable and acpi_tables
 obj-y += get_bus_conf.o
-obj-$(CONFIG_HAVE_MP_TABLE) += mptable.o
-obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o
+obj-$(CONFIG_GENERATE_MP_TABLE) += mptable.o
+obj-$(CONFIG_GENERATE_PIRQ_TABLE) += irq_tables.o
 obj-$(CONFIG_USE_INIT) += cache_as_ram_auto.o
 obj-$(CONFIG_AP_CODE_IN_CAR) += apc_auto.o
-obj-$(CONFIG_HAVE_ACPI_TABLES) +=  dsdt.o
-obj-$(CONFIG_HAVE_ACPI_TABLES) +=  acpi_tables.o
+obj-$(CONFIG_GENERATE_ACPI_TABLES) +=  dsdt.o
+obj-$(CONFIG_GENERATE_ACPI_TABLES) +=  acpi_tables.o
 obj-$(CONFIG_HAVE_FANCTL) += fanctl.o
 
 # This is part of the conversion to init-obj and away from included code. 
diff --git a/src/mainboard/gigabyte/m57sli/Options.lb b/src/mainboard/gigabyte/m57sli/Options.lb
index 0d42656a82..73b46894f5 100644
--- a/src/mainboard/gigabyte/m57sli/Options.lb
+++ b/src/mainboard/gigabyte/m57sli/Options.lb
@@ -19,9 +19,9 @@
 ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
 ## 
 
-uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_HAVE_PIRQ_TABLE
-uses CONFIG_HAVE_ACPI_TABLES
+uses CONFIG_GENERATE_MP_TABLE
+uses CONFIG_GENERATE_PIRQ_TABLE
+uses CONFIG_GENERATE_ACPI_TABLES
 uses CONFIG_HAVE_ACPI_RESUME
 uses CONFIG_ACPI_SSDTX_NUM
 uses CONFIG_USE_FALLBACK_IMAGE
@@ -84,7 +84,7 @@ uses CONFIG_HW_MEM_HOLE_SIZEK
 uses CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC
 uses CONFIG_K8_HT_FREQ_1G_SUPPORT
 
-uses CONFIG_HAVE_HIGH_TABLES
+uses CONFIG_WRITE_HIGH_TABLES
 
 uses CONFIG_HT_CHAIN_UNITID_BASE
 uses CONFIG_HT_CHAIN_END_UNITID_BASE
@@ -157,20 +157,20 @@ default CONFIG_HAVE_HARD_RESET=1
 ##
 ## Build code to export a programmable irq routing table
 ##
-default CONFIG_HAVE_PIRQ_TABLE=1
+default CONFIG_GENERATE_PIRQ_TABLE=1
 default CONFIG_IRQ_SLOT_COUNT=11
 
 ##
 ## Build code to export an x86 MP table
 ## Useful for specifying IRQ routing values
 ##
-default CONFIG_HAVE_MP_TABLE=1
+default CONFIG_GENERATE_MP_TABLE=1
 
 ## HIGH tables support
-default CONFIG_HAVE_HIGH_TABLES=1
+default CONFIG_WRITE_HIGH_TABLES=1
 
 ## ACPI tables will be included
-default CONFIG_HAVE_ACPI_TABLES=1
+default CONFIG_GENERATE_ACPI_TABLES=1
 
 ##
 ## Build code to export a CMOS option table