Initial support for the following new mainboards:

* Nvidia l1_2pvv
* Gigabyte m57sli
* Supermicro h8dmr
* Tyan s2912 -- with HTX

The boards will currently _not_ compile, two further patches
from Yinghai Lu are still missing. Please be patient :)

Signed-off-by: Yinghai Lu <yinghai.lu@amd.com>
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2554 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

1 files changed, 374 insertions, 0 deletions

diff --git a/src/mainboard/gigabyte/m57sli/Config.lb b/src/mainboard/gigabyte/m57sli/Config.lb
new file mode 100644
index 0000000000..96addbedd0
--- /dev/null
+++ b/src/mainboard/gigabyte/m57sli/Config.lb
@@ -0,0 +1,374 @@
+## 
+## This file is part of the LinuxBIOS project.
+## 
+## Copyright (C) 2007 AMD
+## Written by Yinghai Lu <yinghailu@amd.com> for AMD.
+## 
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 2 of the License, or
+## (at your option) any later version.
+## 
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+## GNU General Public License for more details.
+## 
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+## 
+
+##
+## Compute the location and size of where this firmware image
+## (linuxBIOS plus bootloader) will live in the boot rom chip.
+##
+if USE_FAILOVER_IMAGE
+	default ROM_SECTION_SIZE   = FAILOVER_SIZE
+	default ROM_SECTION_OFFSET = ( ROM_SIZE - FAILOVER_SIZE )
+else
+    if USE_FALLBACK_IMAGE
+	default ROM_SECTION_SIZE   = FALLBACK_SIZE
+	default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE - FAILOVER_SIZE )
+    else
+	default ROM_SECTION_SIZE   = ( ROM_SIZE - FALLBACK_SIZE - FAILOVER_SIZE )
+	default ROM_SECTION_OFFSET = 0
+    end
+end
+
+##
+## Compute the start location and size size of
+## The linuxBIOS bootloader.
+##
+default PAYLOAD_SIZE            = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE )
+default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
+
+##
+## Compute where this copy of linuxBIOS will start in the boot rom
+##
+default _ROMBASE      = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE )
+
+##
+## Compute a range of ROM that can cached to speed up linuxBIOS,
+## execution speed.
+##
+## XIP_ROM_SIZE must be a power of 2.
+## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE
+##
+default XIP_ROM_SIZE=65536
+
+if USE_FAILOVER_IMAGE
+	default XIP_ROM_BASE = ( _ROMBASE - XIP_ROM_SIZE + ROM_IMAGE_SIZE)
+else
+    if USE_FALLBACK_IMAGE
+	default XIP_ROM_BASE = ( _ROMBASE - XIP_ROM_SIZE + ROM_IMAGE_SIZE + FAILOVER_SIZE)
+    else
+	default XIP_ROM_BASE = ( _ROMBASE - XIP_ROM_SIZE + ROM_IMAGE_SIZE)
+    end
+end
+
+arch i386 end 
+
+##
+## Build the objects we have code for in this directory.
+##
+
+driver mainboard.o
+#needed by irq_tables and mptable and acpi_tables
+object get_bus_conf.o
+
+if HAVE_MP_TABLE object mptable.o end
+if HAVE_PIRQ_TABLE object irq_tables.o end
+#object reset.o
+if USE_DCACHE_RAM
+
+	if CONFIG_USE_INIT	
+		makerule ./cache_as_ram_auto.o
+		        depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
+        		action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o $@"
+		end
+	else
+		makerule ./cache_as_ram_auto.inc
+        		depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
+		        action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@"
+		        action "perl -e 's/.rodata/.rom.data/g' -pi $@"
+        		action "perl -e 's/.text/.section .rom.text/g' -pi $@"
+		end
+	end
+
+end
+
+if USE_FAILOVER_IMAGE
+else
+    if CONFIG_AP_CODE_IN_CAR
+        makerule ./apc_auto.o
+                depends "$(MAINBOARD)/apc_auto.c option_table.h"
+                action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/apc_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o $@"
+        end
+        ldscript /arch/i386/init/ldscript_apc.lb
+    end
+end
+
+
+##
+## Build our 16 bit and 32 bit linuxBIOS entry code
+##
+if HAVE_FAILOVER_BOOT
+    if USE_FAILOVER_IMAGE
+	mainboardinit cpu/x86/16bit/entry16.inc
+	ldscript /cpu/x86/16bit/entry16.lds
+    end
+else
+    if USE_FALLBACK_IMAGE
+	mainboardinit cpu/x86/16bit/entry16.inc
+	ldscript /cpu/x86/16bit/entry16.lds
+    end
+end
+
+mainboardinit cpu/x86/32bit/entry32.inc
+
+if USE_DCACHE_RAM
+        if CONFIG_USE_INIT
+                ldscript /cpu/x86/32bit/entry32.lds
+        end
+
+        if CONFIG_USE_INIT
+                ldscript /cpu/amd/car/cache_as_ram.lds
+        end
+end
+
+
+##
+## Build our reset vector (This is where linuxBIOS is entered)
+##
+if HAVE_FAILOVER_BOOT
+    if USE_FAILOVER_IMAGE 
+	mainboardinit cpu/x86/16bit/reset16.inc 
+	ldscript /cpu/x86/16bit/reset16.lds 
+    else
+	mainboardinit cpu/x86/32bit/reset32.inc 
+	ldscript /cpu/x86/32bit/reset32.lds 
+    end
+else
+    if USE_FALLBACK_IMAGE 
+	mainboardinit cpu/x86/16bit/reset16.inc 
+	ldscript /cpu/x86/16bit/reset16.lds 
+    else
+	mainboardinit cpu/x86/32bit/reset32.inc 
+	ldscript /cpu/x86/32bit/reset32.lds 
+    end
+end
+
+##
+## Include an id string (For safe flashing)
+##
+mainboardinit southbridge/nvidia/mcp55/id.inc
+ldscript /southbridge/nvidia/mcp55/id.lds
+
+##
+## ROMSTRAP table for MCP55
+##
+if HAVE_FAILOVER_BOOT
+    if USE_FAILOVER_IMAGE 
+	mainboardinit southbridge/nvidia/mcp55/romstrap.inc
+	ldscript /southbridge/nvidia/mcp55/romstrap.lds
+    end
+else
+    if USE_FALLBACK_IMAGE 
+	mainboardinit southbridge/nvidia/mcp55/romstrap.inc
+	ldscript /southbridge/nvidia/mcp55/romstrap.lds
+    end
+end
+
+if USE_DCACHE_RAM
+	##
+	## Setup Cache-As-Ram
+	##
+	mainboardinit cpu/amd/car/cache_as_ram.inc
+end
+
+###
+### This is the early phase of linuxBIOS startup 
+### Things are delicate and we test to see if we should
+### failover to another image.
+###
+if HAVE_FAILOVER_BOOT
+    if USE_FAILOVER_IMAGE
+	if USE_DCACHE_RAM
+		ldscript /arch/i386/lib/failover_failover.lds
+	end
+    end
+else
+    if USE_FALLBACK_IMAGE
+	if USE_DCACHE_RAM
+		ldscript /arch/i386/lib/failover.lds
+	end
+    end
+end
+
+##
+## Setup RAM
+##
+if USE_DCACHE_RAM
+
+	if CONFIG_USE_INIT
+		initobject cache_as_ram_auto.o
+	else
+		mainboardinit ./cache_as_ram_auto.inc
+	end
+end
+
+##
+## Include the secondary Configuration files 
+##
+if CONFIG_CHIP_NAME
+	config chip.h
+end
+
+chip northbridge/amd/amdk8/root_complex
+        device apic_cluster 0 on
+                chip cpu/amd/socket_AM2
+                        device apic 0 on end
+                end
+        end
+	device pci_domain 0 on
+		chip northbridge/amd/amdk8 #mc0
+			device pci 18.0 on 
+				#  devices on link 0, link 0 == LDT 0 
+			        chip southbridge/nvidia/mcp55 
+					device pci 0.0 on end   # HT
+                			device pci 1.0 on # LPC
+						chip superio/ite/it8716f
+							device pnp 2e.0 off #  Floppy
+                	                 			io 0x60 = 0x3f0
+                	                			irq 0x70 = 6
+                	                			drq 0x74 = 2
+							end
+                	        			device pnp 2e.1 on #  Com1
+                	                 			io 0x60 = 0x3f8
+                	                			irq 0x70 = 4
+							end
+                	        			device pnp 2e.2 off #  Com2
+                	                 			io 0x60 = 0x2f8
+                	                			irq 0x70 = 3
+							end
+                	        			device pnp 2e.3 off #  Parallel Port
+                	                 			io 0x60 = 0x378
+                	                			irq 0x70 = 7
+							end
+                	        			device pnp 2e.4 off #  EC
+							end
+                	        			device pnp 2e.5 on #  Keyboard
+                	                 			io 0x60 = 0x60
+                	                 			io 0x62 = 0x64
+                	                			irq 0x70 = 1
+							end
+                	        			device pnp 2e.6 on #  Mouse
+                	                			irq 0x70 = 12
+							end
+                	        			device pnp 2e.8 off #  MIDI
+								io 0x60 = 0x300
+								irq 0x70 = 9
+							end
+                	        			device pnp 2e.9 off #  GAME
+								io 0x60 = 0x220
+							end
+                	        			device pnp 2e.a off end #  CIR
+						end
+					end
+			                device pci 1.1 on # SM 0
+                                                chip drivers/generic/generic #dimm 0-0-0
+                                                        device i2c 50 on end  
+                                                end              
+                                                chip drivers/generic/generic #dimm 0-0-1
+                                                        device i2c 51 on end
+                                                end     
+                                                chip drivers/generic/generic #dimm 0-1-0
+                                                        device i2c 52 on end
+                                                end             
+                                                chip drivers/generic/generic #dimm 0-1-1
+                                                        device i2c 53 on end
+                                                end              
+                                                chip drivers/generic/generic #dimm 1-0-0
+                                                        device i2c 54 on end
+                                                end     
+                                                chip drivers/generic/generic #dimm 1-0-1
+                                                        device i2c 55 on end
+                                                end     
+                                                chip drivers/generic/generic #dimm 1-1-0
+                                                        device i2c 56 on end
+                                                end     
+                                                chip drivers/generic/generic #dimm 1-1-1
+                                                        device i2c 57 on end
+                                                end 
+					end # SM
+                                        device pci 1.1 on # SM 1
+#PCI device smbus address will depend on addon pci device, do we need to scan_smbus_bus?
+#                                                chip drivers/generic/generic #PCIXA Slot1
+#                                                        device i2c 50 on end
+#                                                end
+#                                                chip drivers/generic/generic #PCIXB Slot1
+#                                                        device i2c 51 on end
+#                                                end     
+#                                                chip drivers/generic/generic #PCIXB Slot2
+#                                                        device i2c 52 on end
+#                                                end             
+#                                                chip drivers/generic/generic #PCI Slot1
+#                                                        device i2c 53 on end
+#                                                end              
+#                                                chip drivers/generic/generic #Master MCP55 PCI-E
+#                                                        device i2c 54 on end
+#                                                end     
+#                                                chip drivers/generic/generic #Slave MCP55 PCI-E
+#                                                        device i2c 55 on end
+#                                                end             
+                                                chip drivers/generic/generic #MAC EEPROM
+                                                        device i2c 51 on end
+                                                end 
+
+                                        end # SM 
+	                		device pci 2.0 on end # USB 1.1
+        	        		device pci 2.1 on end # USB 2
+                			device pci 4.0 on end # IDE
+	                		device pci 5.0 on end # SATA 0
+	                		device pci 5.1 on end # SATA 1
+	                		device pci 5.2 on end # SATA 2
+                			device pci 6.0 on end # PCI
+        	        		device pci 6.1 on end # AZA
+	                		device pci 8.0 on end # NIC
+	                		device pci 9.0 off end # NIC
+        	       			device pci a.0 on end # PCI E 5
+        	       			device pci b.0 on end # PCI E 4
+                			device pci c.0 on end # PCI E 3
+                			device pci d.0 on end # PCI E 2
+                			device pci e.0 on end # PCI E 1
+        	       			device pci f.0 on end # PCI E 0
+	                                register "ide0_enable" = "1"
+                	                register "sata0_enable" = "1"
+                        	        register "sata1_enable" = "1"
+					register "mac_eeprom_smbus" = "3" # 1: smbus under 2e.8, 2: SM0 3: SM1
+					register "mac_eeprom_addr" = "0x51"
+				end
+			end #  device pci 18.0 
+			device pci 18.0 on end # Link 1
+			device pci 18.0 on end
+			device pci 18.1 on end
+			device pci 18.2 on end
+			device pci 18.3 on end
+		end # mc0
+		
+	end # PCI domain
+	
+#       chip drivers/generic/debug 
+#               device pnp 0.0 off end # chip name
+#                device pnp 0.1 on end # pci_regs_all
+#                device pnp 0.2 on end # mem
+#                device pnp 0.3 off end # cpuid
+#                device pnp 0.4 on end # smbus_regs_all
+#                device pnp 0.5 off end # dual core msr
+#                device pnp 0.6 off end # cache size
+#               device pnp 0.7 off end # tsc
+#                device pnp 0.8 off  end # io
+#                device pnp 0.9 off end # io
+#       end  
+end #root_complex