Since some people disapprove of white space cleanups mixed in regular commits

while others dislike them being extra commits, let's clean them up once and
for all for the existing code. If it's ugly, let it only be ugly once :-)

Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5507 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

10 files changed, 37 insertions, 37 deletions

diff --git a/src/mainboard/digitallogic/Kconfig b/src/mainboard/digitallogic/Kconfig
index 7c8fb1164e..7e115fc402 100644
--- a/src/mainboard/digitallogic/Kconfig
+++ b/src/mainboard/digitallogic/Kconfig
@@ -1,7 +1,7 @@
 choice
 	prompt "Mainboard model"
 	depends on VENDOR_DIGITAL_LOGIC
-        
+
 source "src/mainboard/digitallogic/adl855pc/Kconfig"
 source "src/mainboard/digitallogic/msm586seg/Kconfig"
 source "src/mainboard/digitallogic/msm800sev/Kconfig"
diff --git a/src/mainboard/digitallogic/adl855pc/devicetree.cb b/src/mainboard/digitallogic/adl855pc/devicetree.cb
index 5365b3f538..6b52633382 100644
--- a/src/mainboard/digitallogic/adl855pc/devicetree.cb
+++ b/src/mainboard/digitallogic/adl855pc/devicetree.cb
@@ -1,5 +1,5 @@
 chip northbridge/intel/i855
-	device pci_domain 0 on 
+	device pci_domain 0 on
 		device pci 0.0 on end
 		device pci 1.0 on end
 		chip southbridge/intel/i82801dx
@@ -51,7 +51,7 @@ chip northbridge/intel/i855
                 	end
 		end
 	end
-	device apic_cluster 0 on 
+	device apic_cluster 0 on
 		chip cpu/intel/socket_mPGA479M
 			device apic 0 on end
 		end
diff --git a/src/mainboard/digitallogic/adl855pc/irq_tables.c b/src/mainboard/digitallogic/adl855pc/irq_tables.c
index f3978d5e81..8b4352d25a 100644
--- a/src/mainboard/digitallogic/adl855pc/irq_tables.c
+++ b/src/mainboard/digitallogic/adl855pc/irq_tables.c
@@ -1,4 +1,4 @@
-/* This file was generated by getpir.c, do not modify! 
+/* This file was generated by getpir.c, do not modify!
    (but if you do, please run checkpir on it to verify)
    Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up
 
diff --git a/src/mainboard/digitallogic/adl855pc/romstage.c b/src/mainboard/digitallogic/adl855pc/romstage.c
index 731e681253..a137a3fd6f 100644
--- a/src/mainboard/digitallogic/adl855pc/romstage.c
+++ b/src/mainboard/digitallogic/adl855pc/romstage.c
@@ -15,7 +15,7 @@
 #include "southbridge/intel/i82801dx/i82801dx_early_smbus.c"
 #include "northbridge/intel/i855/raminit.h"
 #include "northbridge/intel/i855/debug.c"
-#include "superio/winbond/w83627hf/w83627hf_early_serial.c" 
+#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
 #include "cpu/x86/mtrr/earlymtrr.c"
 #include "cpu/x86/bist.h"
 
@@ -45,7 +45,7 @@ void main(unsigned long bist)
 		init_timer();
 #endif
 	}
-        
+
         w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
         uart_init();
         console_init();
@@ -66,7 +66,7 @@ void main(unsigned long bist)
 
 		sdram_initialize(ARRAY_SIZE(memctrl), memctrl);
 
-	} 
+	}
 
 #if 0
 	dump_pci_devices();
@@ -76,7 +76,7 @@ void main(unsigned long bist)
 	ram_check(0x00000000, msr.lo+(msr.hi<<32));
 	// Check 16MB of memory @ 0
 	ram_check(0x00000000, 0x01000000);
-	// Check 16MB of memory @ 2GB 
+	// Check 16MB of memory @ 2GB
 	ram_check(0x80000000, 0x81000000);
 #endif
 }
diff --git a/src/mainboard/digitallogic/msm586seg/devicetree.cb b/src/mainboard/digitallogic/msm586seg/devicetree.cb
index 05067ca632..1ccf39f5b8 100644
--- a/src/mainboard/digitallogic/msm586seg/devicetree.cb
+++ b/src/mainboard/digitallogic/msm586seg/devicetree.cb
@@ -1,5 +1,5 @@
 chip cpu/amd/sc520
-	device pci_domain 0 on 
+	device pci_domain 0 on
 		device pci 0.0 on end
 		device pci 12.0 on end # enet
 		device pci 14.0 on end # 69000
diff --git a/src/mainboard/digitallogic/msm586seg/irq_tables.c b/src/mainboard/digitallogic/msm586seg/irq_tables.c
index 9b49747ead..22d5820a62 100644
--- a/src/mainboard/digitallogic/msm586seg/irq_tables.c
+++ b/src/mainboard/digitallogic/msm586seg/irq_tables.c
@@ -1,4 +1,4 @@
-/* This file was generated by getpir.c, do not modify! 
+/* This file was generated by getpir.c, do not modify!
    (but if you do, please run checkpir on it to verify)
  * Contains the IRQ Routing Table dumped directly from your memory, which BIOS sets up
  *
diff --git a/src/mainboard/digitallogic/msm586seg/mainboard.c b/src/mainboard/digitallogic/msm586seg/mainboard.c
index fefe553de3..2361059a7d 100644
--- a/src/mainboard/digitallogic/msm586seg/mainboard.c
+++ b/src/mainboard/digitallogic/msm586seg/mainboard.c
@@ -14,10 +14,10 @@ static void irqdump(void)
   int i;
   int irqlist[] = {0xd00, 0xd02, 0xd03, 0xd04, 0xd08, 0xd0a,
 	        0xd14, 0xd18, 0xd1a, 0xd1b, 0xd1c,
-		0xd20, 0xd21, 0xd22, 0xd28, 0xd29, 
+		0xd20, 0xd21, 0xd22, 0xd28, 0xd29,
 		0xd30, 0xd31, 0xd32, 0xd33,
-		0xd40, 0xd41, 0xd42, 0xd43,0xd44, 0xd45, 0xd46, 
-		0xd50, 0xd51, 0xd52, 0xd53,0xd54, 0xd55, 0xd56, 0xd57,0xd58, 0xd59, 0xd5a, 
+		0xd40, 0xd41, 0xd42, 0xd43,0xd44, 0xd45, 0xd46,
+		0xd50, 0xd51, 0xd52, 0xd53,0xd54, 0xd55, 0xd56, 0xd57,0xd58, 0xd59, 0xd5a,
 		-1};
   mmcr = (void *) 0xfffef000;
 
@@ -37,7 +37,7 @@ static void enable_dev(struct device *dev)
 	//volatile struct mmcrpic *pic = MMCRPIC;
 	volatile struct mmcr *mmcr = MMCRDEFAULT;
 
-	/* msm586seg has this register set to a weird value. 
+	/* msm586seg has this register set to a weird value.
 	 * follow the board, not the manual!
 	 */
 
@@ -47,7 +47,7 @@ static void enable_dev(struct device *dev)
 
 	/* from fuctory bios */
 	/* NOTE: the following interrupt settings made interrupts work
-	 * for hard drive, and serial, but not for ethernet 
+	 * for hard drive, and serial, but not for ethernet
 	 */
 	/* just do what they say and nobody gets hurt. */
 	mmcr->pic.pcicr = 0 ; // M_GINT_MODE | M_S1_MODE | M_S2_MODE;
@@ -78,7 +78,7 @@ static void enable_dev(struct device *dev)
 	printk(BIOS_ERR, "0xc22 0x%x\n", *(unsigned short *) 0xfffefc22);
 
 	/* The following block has NOT proven sufficient to get
-	 * the VGA hardware to talk to us 
+	 * the VGA hardware to talk to us
 	 */
 	/* let's set some mmcr stuff per the BIOS settings */
 	mmcr->dbctl.dbctl = 0x10;
@@ -100,20 +100,20 @@ static void enable_dev(struct device *dev)
 	 */
 	mmcr->sysmap.adddecctl = 0x10;
 
-	/* VGA now talks to us, so this adddecctl was the trick. 
-	 * still no interrupts from enet. 
-	 * Let's try fixing the piodata stuff, as there may be 
+	/* VGA now talks to us, so this adddecctl was the trick.
+	 * still no interrupts from enet.
+	 * Let's try fixing the piodata stuff, as there may be
 	 * some wire there not documented.
 	 */
 	mmcr->pio.data31_16 = 0xffbf;
 	/* also, our sl?picmode needs to match fuctory bios */
 	mmcr->pic.sl1picmode = 0x80;
 	mmcr->pic.sl2picmode = 0x0;
-	/* and, finally, they do set gp5imap and we don't. 
+	/* and, finally, they do set gp5imap and we don't.
 	 */
 	mmcr->pic.gp5imap = 0xd;
 	/* remaining problem: almost certainly, the irq table is bogus
-	 * NO SHOCK as it came from fuctory bios. 
+	 * NO SHOCK as it came from fuctory bios.
 	 * but let's try these 4 changes for now and see what shakes.
 	 */
 	/* still not interrupts. */
diff --git a/src/mainboard/digitallogic/msm586seg/romstage.c b/src/mainboard/digitallogic/msm586seg/romstage.c
index 2035993be8..ae964fea93 100644
--- a/src/mainboard/digitallogic/msm586seg/romstage.c
+++ b/src/mainboard/digitallogic/msm586seg/romstage.c
@@ -74,7 +74,7 @@ static inline void irqinit(void){
 /* these values taken from the msm board itself.
  * and they cause the board to not even come out of calibrating_delay_loop
  * if you can believe it. Our problem right now is no IDE or serial interrupts
- * So we'll try to put interrupts in, one at a time. IDE first. 
+ * So we'll try to put interrupts in, one at a time. IDE first.
  */
 	cp = (volatile unsigned char *) 0xfffefd00;
 	*cp =  0x11;
@@ -179,9 +179,9 @@ static void main(unsigned long bist)
 		print_err("HI THERE!\n");
 		//			sizemem();
 	staticmem();
-	print_err("c60 is "); print_err_hex16(*(unsigned short *)0xfffefc60); 
+	print_err("c60 is "); print_err_hex16(*(unsigned short *)0xfffefc60);
 	print_err("\n");
-			
+
 	//			while(1)
 	print_err("STATIC MEM DONE\n");
 	outb(0xee, 0x80);
@@ -198,18 +198,18 @@ static void main(unsigned long bist)
 			 "jnz 1b\n\t"
 			 :
 			 : "a" (0), "D" (0), "c" (1024*1024)
-			 ); 
-	
-	
+			 );
+
+
 #endif
-	
+
 #if 0
 	dump_pci_devices();
 #endif
 #if 0
 	dump_pci_device(PCI_DEV(0, 0, 0));
 #endif
-	
+
 #if 0
 	print_err("RAM CHECK!\n");
 	// Check 16MB of memory @ 0
@@ -223,10 +223,10 @@ static void main(unsigned long bist)
 #if 1
 	{
 	  volatile unsigned char *src = (unsigned char *) 0x2000000 + 0x60000;
-	  volatile unsigned char *dst = (unsigned char *) 0x4000; 
+	  volatile unsigned char *dst = (unsigned char *) 0x4000;
 	  for(i = 0; i < 0x20000; i++) {
 	    /*
-	      print_err("Set dst "); print_err_hex32((unsigned long) dst); 
+	      print_err("Set dst "); print_err_hex32((unsigned long) dst);
 	      print_err(" to "); print_err_hex32(*src); print_err("\n");
 	    */
 	    *dst = *src;
@@ -244,10 +244,10 @@ static void main(unsigned long bist)
 			 "jmp *%%edi\n\t"
 			 :
 			 : "a" (0x4000)
-			 ); 
-	
+			 );
+
 	print_err("Oh dear, I'm afraid it didn't work...\n");
-	
+
 	while(1);
 #endif
 }
diff --git a/src/mainboard/digitallogic/msm800sev/devicetree.cb b/src/mainboard/digitallogic/msm800sev/devicetree.cb
index 9636dee678..6890e83327 100644
--- a/src/mainboard/digitallogic/msm800sev/devicetree.cb
+++ b/src/mainboard/digitallogic/msm800sev/devicetree.cb
@@ -1,5 +1,5 @@
 chip northbridge/amd/lx
-  	device pci_domain 0 on 
+  	device pci_domain 0 on
     		device pci 1.0 on end
 		device pci 1.1 on end
       		chip southbridge/amd/cs5536
@@ -57,7 +57,7 @@ chip northbridge/amd/lx
 						io 0x60 = 0x220
 						io 0x62 = 0x300
 						irq 0x70 = 9
-					end						
+					end
 					device pnp 2e.8 off end #  GPIO2
 					device pnp 2e.9 off end #  GPIO3
 					device pnp 2e.a off end #  ACPI
diff --git a/src/mainboard/digitallogic/msm800sev/romstage.c b/src/mainboard/digitallogic/msm800sev/romstage.c
index 4598e89ad9..379f5517bc 100644
--- a/src/mainboard/digitallogic/msm800sev/romstage.c
+++ b/src/mainboard/digitallogic/msm800sev/romstage.c
@@ -93,7 +93,7 @@ void main(unsigned long bist)
 	print_err("POST 02\n");
 	__asm__("wbinvd\n");
 	print_err("Past wbinvd\n");
-	/* we are finding the return does not work on this board. Explicitly call the label that is 
+	/* we are finding the return does not work on this board. Explicitly call the label that is
 	 * after the call to us. This is gross, but sometimes at this level it is the only way out
 	 */
 	void done_cache_as_ram_main(void);