newconfig is no more.

Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5089 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

2 files changed, 0 insertions, 350 deletions

diff --git a/src/mainboard/digitallogic/msm800sev/Config.lb b/src/mainboard/digitallogic/msm800sev/Config.lb
deleted file mode 100644
index 5965cc1d0a..0000000000
--- a/src/mainboard/digitallogic/msm800sev/Config.lb
+++ /dev/null
@@ -1,170 +0,0 @@
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-
-##
-## Set all of the defaults for an x86 architecture
-##
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-
-if CONFIG_GENERATE_PIRQ_TABLE
-	object irq_tables.o
-end
-
-	#compile cache_as_ram.c to auto.inc
-	makerule ./cache_as_ram_auto.inc
-			depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
-			action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
-			action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
-			action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
-	end
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_USE_FALLBACK_IMAGE 
-	mainboardinit cpu/x86/16bit/reset16.inc 
-	ldscript /cpu/x86/16bit/reset16.lds 
-else
-	mainboardinit cpu/x86/32bit/reset32.inc 
-	ldscript /cpu/x86/32bit/reset32.lds 
-end
-
-### Should this be in the northbridge code?
-mainboardinit arch/i386/lib/cpu_reset.inc
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-###
-### This is the early phase of coreboot startup 
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_USE_FALLBACK_IMAGE
-	ldscript /arch/i386/lib/failover.lds 
-#	mainboardinit ./failover.inc
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
-mainboardinit cpu/x86/fpu_enable.inc
-
-	mainboardinit cpu/amd/model_lx/cache_as_ram.inc
-	mainboardinit ./cache_as_ram_auto.inc
-
-##
-## Include the secondary Configuration files 
-##
-dir /pc80
-config chip.h
-
-chip northbridge/amd/lx
-  	device pci_domain 0 on 
-    		device pci 1.0 on end
-		device pci 1.1 on end
-      		chip southbridge/amd/cs5536
-			# IRQ 12 and 1 unmasked,  Keyboard and Mouse IRQs. OK
-			# SIRQ Mode = Active(Quiet) mode. Save power....
-			# Invert mask = IRQ 12 and 1 are active high. Keyboard and Mouse IRQs. OK
-			# How to get these? Boot linux and do this:
-			# rdmsr 0x51400025
-			register "lpc_serirq_enable" = "0x0000105a"
-			# rdmsr 0x5140004e -- polairy is high 16 bits of low 32 bits
-			register "lpc_serirq_polarity" = "0x0000EFA5"
-			# mode is high 10 bits (determined from code)
-			register "lpc_serirq_mode" = "1"
-			# Don't yet know how to find this.
-			register "enable_gpio_int_route" = "0x0D0C0700"
-			register "enable_ide_nand_flash" = "0" # 0:ide mode, 1:flash
-			register "enable_USBP4_device" = "0"	#0: host, 1:device
-			register "enable_USBP4_overcurrent" = "0" #0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381)
-			register "com1_enable" = "0"
-			register "com1_address" = "0x3F8"
-			register "com1_irq" = "4"
-			register "com2_enable" = "0"
-			register "com2_address" = "0x2F8"
-			register "com2_irq" = "3"
-			register "unwanted_vpci[0]" = "0"	# End of list has a zero
-        			device pci f.0 on	# ISA Bridge
-				chip superio/winbond/w83627hf
-					device pnp 2e.0 off #  Floppy
-						io 0x60 = 0x3f0
-						irq 0x70 = 6
-						drq 0x74 = 2
-					end
-					device pnp 2e.1 off #  Parallel Port
-						io 0x60 = 0x378
-						irq 0x70 = 7
-					end
-					device pnp 2e.2 on #  Com1
-						io 0x60 = 0x3f8
-						irq 0x70 = 4
-					end
-					device pnp 2e.3 on #  Com2
-						io 0x60 = 0x2f8
-						irq 0x70 = 3
-					end
-					device pnp 2e.5 on #  Keyboard
-						io 0x60 = 0x60
-						io 0x62 = 0x64
-						irq 0x70 = 1
-						irq 0x72 = 12
-					end
-					device pnp 2e.6 off #  CIR
-						io 0x60 = 0x100
-					end
-					device pnp 2e.7 off #  GAME_MIDI_GIPO1
-						io 0x60 = 0x220
-						io 0x62 = 0x300
-						irq 0x70 = 9
-					end						
-					device pnp 2e.8 off end #  GPIO2
-					device pnp 2e.9 off end #  GPIO3
-					device pnp 2e.a off end #  ACPI
-					device pnp 2e.b on #  HW Monitor
-						io 0x60 = 0x290
-						irq 0x70 = 5
-					end
-				end
-			end
-			device pci f.1 on end	# Flash controller
-			device pci f.2 on end	# IDE controller
-        			device pci f.3 on end 	# Audio
-        			device pci f.4 on end	# OHCI
-			device pci f.5 on end	# EHCI
-      		end
-	end
-
-	# APIC cluster is late CPU init.
-	device apic_cluster 0 on
-		chip cpu/amd/model_lx
-			device apic 0 on end
-		end
-	end
-
-end
-
diff --git a/src/mainboard/digitallogic/msm800sev/Options.lb b/src/mainboard/digitallogic/msm800sev/Options.lb
deleted file mode 100644
index 88e2a1f0e2..0000000000
--- a/src/mainboard/digitallogic/msm800sev/Options.lb
+++ /dev/null
@@ -1,180 +0,0 @@
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_ARCH
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_COMPRESSED_PAYLOAD_NRV2B
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_RAMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_UDELAY_TSC
-uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_VIDEO_MB
-uses CONFIG_USE_DCACHE_RAM
-uses CONFIG_DCACHE_RAM_BASE
-uses CONFIG_DCACHE_RAM_SIZE
-uses CONFIG_USE_PRINTK_IN_CAR
-uses CONFIG_PIRQ_ROUTE
-
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-default CONFIG_ROM_SIZE  = 256*1024
-
-###
-### Build options
-###
-default CONFIG_CONSOLE_VGA=0
-default CONFIG_VIDEO_MB=8
-default CONFIG_PCI_ROM_RUN=0
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-
-##
-## no MP table
-##
-default CONFIG_GENERATE_MP_TABLE=0
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=0
-
-## Delay timer options
-##
-default CONFIG_UDELAY_TSC=1
-default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=9
-default CONFIG_PIRQ_ROUTE=1
-#object irq_tables.o
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=0
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 32768
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-
-##
-## enable CACHE_AS_RAM specifics
-##
-default CONFIG_USE_DCACHE_RAM=1
-default CONFIG_DCACHE_RAM_BASE=0xc8000
-default CONFIG_DCACHE_RAM_SIZE=0x08000
-default CONFIG_USE_PRINTK_IN_CAR=1
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 16K heap
-##
-default CONFIG_HEAP_SIZE=0x4000
-
-##
-## Only use the option table in a normal image
-##
-#default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-default CONFIG_USE_OPTION_TABLE = 0
-
-default CONFIG_RAMBASE = 0x00004000
-
-default CONFIG_ROM_PAYLOAD     = 1
-
-##
-## The default compiler
-##
-default CONFIG_CROSS_COMPILE=""
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG      1   system is unusable               
-## ALERT      2   action must be taken immediately 
-## CRIT       3   critical conditions              
-## ERR        4   error conditions                 
-## WARNING    5   warning conditions               
-## NOTICE     6   normal but significant condition 
-## INFO       7   informational                    
-## CONFIG_DEBUG      8   debug-level messages             
-## SPEW       9   Way too many details             
-
-## Request this level of debugging output
-default  CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default  CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
-
-end