diff options
author | Arthur Heymans <arthur@aheymans.xyz> | 2019-05-30 22:40:20 +0200 |
---|---|---|
committer | Patrick Georgi <pgeorgi@google.com> | 2019-08-05 08:26:58 +0000 |
commit | 041200fae35f3701c160f96fbb617cddb72375fa (patch) | |
tree | 757a50e9bac544ef256e21270b9480e10a64423f /src/mainboard/cubietech/cubieboard | |
parent | 2e92adce773829efa1501a70d30a42dfa0e7f725 (diff) |
mb/cubietech/cubieboard: Remove board
The Allwinner code was never completed and lacks a driver to load
romstage from the bootblock.
Change-Id: I12e9d7213ce61ab757e9317a63299d5d82e69acb
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33132
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Diffstat (limited to 'src/mainboard/cubietech/cubieboard')
-rw-r--r-- | src/mainboard/cubietech/cubieboard/Kconfig | 30 | ||||
-rw-r--r-- | src/mainboard/cubietech/cubieboard/Kconfig.name | 2 | ||||
-rw-r--r-- | src/mainboard/cubietech/cubieboard/Makefile.inc | 6 | ||||
-rw-r--r-- | src/mainboard/cubietech/cubieboard/board_info.txt | 1 | ||||
-rw-r--r-- | src/mainboard/cubietech/cubieboard/bootblock.c | 157 | ||||
-rw-r--r-- | src/mainboard/cubietech/cubieboard/devicetree.cb | 12 | ||||
-rw-r--r-- | src/mainboard/cubietech/cubieboard/memlayout.ld | 34 | ||||
-rw-r--r-- | src/mainboard/cubietech/cubieboard/romstage.c | 101 |
8 files changed, 0 insertions, 343 deletions
diff --git a/src/mainboard/cubietech/cubieboard/Kconfig b/src/mainboard/cubietech/cubieboard/Kconfig deleted file mode 100644 index 9ef5797044..0000000000 --- a/src/mainboard/cubietech/cubieboard/Kconfig +++ /dev/null @@ -1,30 +0,0 @@ -if BOARD_CUBIETECH_CUBIEBOARD - -config BOARD_SPECIFIC_OPTIONS - def_bool y - select CPU_ALLWINNER_A10 - select BOARD_ROMSIZE_KB_4096 - select DRIVER_XPOWERS_AXP209 - select MISSING_BOARD_RESET - -config MAINBOARD_DIR - string - default cubietech/cubieboard - -config MAINBOARD_PART_NUMBER - string - default "Cubieboard A10" - -config MAX_CPUS - int - default 1 - -config DRAM_SIZE_MB - int - default 1024 - -config UART_FOR_CONSOLE - int - default 0 - -endif # BOARD_CUBIETECH_CUBIEBOARD diff --git a/src/mainboard/cubietech/cubieboard/Kconfig.name b/src/mainboard/cubietech/cubieboard/Kconfig.name deleted file mode 100644 index 3a011819b4..0000000000 --- a/src/mainboard/cubietech/cubieboard/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config BOARD_CUBIETECH_CUBIEBOARD - bool "Cubieboard" diff --git a/src/mainboard/cubietech/cubieboard/Makefile.inc b/src/mainboard/cubietech/cubieboard/Makefile.inc deleted file mode 100644 index f3a6de237d..0000000000 --- a/src/mainboard/cubietech/cubieboard/Makefile.inc +++ /dev/null @@ -1,6 +0,0 @@ -bootblock-y += bootblock.c -romstage-y += romstage.c - -bootblock-y += memlayout.ld -romstage-y += memlayout.ld -ramstage-y += memlayout.ld diff --git a/src/mainboard/cubietech/cubieboard/board_info.txt b/src/mainboard/cubietech/cubieboard/board_info.txt deleted file mode 100644 index c67b641a94..0000000000 --- a/src/mainboard/cubietech/cubieboard/board_info.txt +++ /dev/null @@ -1 +0,0 @@ -Category: sbc diff --git a/src/mainboard/cubietech/cubieboard/bootblock.c b/src/mainboard/cubietech/cubieboard/bootblock.c deleted file mode 100644 index 05e3847d39..0000000000 --- a/src/mainboard/cubietech/cubieboard/bootblock.c +++ /dev/null @@ -1,157 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2013 Alexandru Gagniuc <mr.nuke.me@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License, or (at your - * option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* - * Minimal bootblock for Cubieboard - * It sets up CPU clock, and enables the bootblock console. - */ - -#include <device/mmio.h> -#include <bootblock_common.h> -#include <console/uart.h> -#include <delay.h> -#include <cpu/allwinner/a10/gpio.h> -#include <cpu/allwinner/a10/clock.h> -#include <cpu/allwinner/a10/dramc.h> - -#define CPU_AHB_APB0_DEFAULT \ - CPU_CLK_SRC_OSC24M \ - | APB0_DIV_1 \ - | AHB_DIV_2 \ - | AXI_DIV_1 - -#define GPH_STATUS_LEDS (1 << 20) | (1 << 21) -#define GPH_LED1_PIN_NO 21 -#define GPH_LED2_PIN_NO 20 - -#define GPB_UART0_FUNC 2 -#define GPB_UART0_PINS ((1 << 22) | (1 << 23)) - -#define GPF_SD0_FUNC 2 -#define GPF_SD0_PINS 0x3f /* PF0 thru PF5 */ -#define GPH1_SD0_DET_FUNC 5 - -static void cubieboard_set_sys_clock(void) -{ - u32 reg32; - struct a10_ccm *ccm = (void *)A1X_CCM_BASE; - - /* Switch CPU clock to main oscillator */ - write32(&ccm->cpu_ahb_apb0_cfg, CPU_AHB_APB0_DEFAULT); - - /* Configure the PLL1. The value is the same one used by u-boot - * P = 1, N = 16, K = 1, M = 1 --> Output = 384 MHz - */ - write32(&ccm->pll1_cfg, 0xa1005000); - - /* FIXME: Delay to wait for PLL to lock */ - u32 wait = 1000; - while (--wait); - - /* Switch CPU to PLL clock */ - reg32 = read32(&ccm->cpu_ahb_apb0_cfg); - reg32 &= ~CPU_CLK_SRC_MASK; - reg32 |= CPU_CLK_SRC_PLL1; - write32(&ccm->cpu_ahb_apb0_cfg, reg32); -} - -static void cubieboard_setup_clocks(void) -{ - struct a10_ccm *ccm = (void *)A1X_CCM_BASE; - - cubieboard_set_sys_clock(); - /* Configure the clock source for APB1. This drives our UART */ - write32(&ccm->apb1_clk_div_cfg, - APB1_CLK_SRC_OSC24M | APB1_RAT_N(0) | APB1_RAT_M(0)); - - /* Configure the clock for SD0 */ - write32(&ccm->sd0_clk_cfg, - SDx_CLK_GATE | SDx_CLK_SRC_OSC24M | SDx_RAT_EXP_N(0) | SDx_RAT_M(1)); - - /* Enable clock to SD0 */ - a1x_periph_clock_enable(A1X_CLKEN_MMC0); - -} - -static void cubieboard_setup_gpios(void) -{ - /* Mux Status LED pins */ - gpio_set_multipin_func(GPH, GPH_STATUS_LEDS, GPIO_PIN_FUNC_OUTPUT); - /* Turn on green LED to let user know we're executing coreboot code */ - gpio_set(GPH, GPH_LED2_PIN_NO); - - /* Mux UART pins */ - gpio_set_multipin_func(GPB, GPB_UART0_PINS, GPB_UART0_FUNC); - - /* Mux SD pins */ - gpio_set_multipin_func(GPF, GPF_SD0_PINS, GPF_SD0_FUNC); - gpio_set_pin_func(GPH, 1, GPH1_SD0_DET_FUNC); -} - -static void cubieboard_enable_uart(void) -{ - a1x_periph_clock_enable(A1X_CLKEN_UART0); -} - -static void cubieboard_raminit(void) -{ - struct dram_para dram_para = { - .clock = 480, - .type = 3, - .rank_num = 1, - .density = 4096, - .io_width = 16, - .bus_width = 32, - .cas = 6, - .zq = 123, - .odt_en = 0, - .size = 1024, - .tpr0 = 0x30926692, - .tpr1 = 0x1090, - .tpr2 = 0x1a0c8, - .tpr3 = 0, - .tpr4 = 0, - .tpr5 = 0, - .emr1 = 0, - .emr2 = 0, - .emr3 = 0, - }; - - dramc_init(&dram_para); - - /* FIXME: ram_check does not compile for ARM, - * and we didn't init console yet - */ - ////void *const test_base = (void *)A1X_DRAM_BASE; - ////ram_check((u32)test_base, (u32)test_base + 0x1000); -} - -void bootblock_mainboard_early_init(void) -{ - /* A10 Timer init uses the 24MHz clock, not PLLs, so we can init it very - * early on to get udelay, which is used almost everywhere else. - */ - init_timer(); - - cubieboard_setup_clocks(); - cubieboard_setup_gpios(); - cubieboard_enable_uart(); -} - -void bootblock_mainboard_init(void) -{ - cubieboard_raminit(); -} diff --git a/src/mainboard/cubietech/cubieboard/devicetree.cb b/src/mainboard/cubietech/cubieboard/devicetree.cb deleted file mode 100644 index 033a89e628..0000000000 --- a/src/mainboard/cubietech/cubieboard/devicetree.cb +++ /dev/null @@ -1,12 +0,0 @@ -chip cpu/allwinner/a10 - device cpu_cluster 0 on end - - chip drivers/xpowers/axp209 # AXP209 is on I2C 0 - device i2c 0x34 on end - register "dcdc2_voltage_mv" = "1400" # Vcore - register "dcdc3_voltage_mv" = "1250" # DLL Vdd - register "ldo2_voltage_mv" = "3000" # AVCC - register "ldo3_voltage_mv" = "2800" # NC? - register "ldo4_voltage_mv" = "2800" # CSI1-IO-2V8 - end -end diff --git a/src/mainboard/cubietech/cubieboard/memlayout.ld b/src/mainboard/cubietech/cubieboard/memlayout.ld deleted file mode 100644 index b9bf10b8f6..0000000000 --- a/src/mainboard/cubietech/cubieboard/memlayout.ld +++ /dev/null @@ -1,34 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright 2013 Alexandru Gagniuc <mr.nuke.me@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <memlayout.h> - -#include <arch/header.ld> - -SECTIONS -{ - SRAM_START(0x0) - /* eGON.BT0: 32 bytes */ - BOOTBLOCK(0x20, 0x5fa0) - STACK(0x6000, 8K) - SRAM_END(0x8000) - - DRAM_START(0x40000000) - RAMSTAGE(0x40000000, 16M) - ROMSTAGE(0x41000000, 108K) - - /* TODO: Implement MMU support and move TTB to a better location. */ - TTB(0x42000000, 16K) -} diff --git a/src/mainboard/cubietech/cubieboard/romstage.c b/src/mainboard/cubietech/cubieboard/romstage.c deleted file mode 100644 index bfb5e029d6..0000000000 --- a/src/mainboard/cubietech/cubieboard/romstage.c +++ /dev/null @@ -1,101 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2013 Alexandru Gagniuc <mr.nuke.me@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License, or (at your - * option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* - * Basic romstage for Cubieboard - * - * Set up system voltages, then increase the CPU clock, before turning control - * to ramstage. The CPU VDD needs to be properly set before it can run at full - * speed. Setting the CPU at full speed helps lzma-decompress ramstage a lot - * faster. - */ - -#include <console/console.h> -#include <cpu/allwinner/a10/clock.h> -#include <cpu/allwinner/a10/gpio.h> -#include <cpu/allwinner/a10/twi.h> -#include <program_loading.h> -#include <device/device.h> -#include <drivers/xpowers/axp209/axp209.h> -#include <drivers/xpowers/axp209/chip.h> -#include <types.h> - -#define GPB_TWI0_FUNC 2 -#define GPB_TWI0_PINS ((1 << 0) | (1 << 1)) - -#define AXP209_BUS 0 - -static enum cb_err cubieboard_setup_power(void) -{ - enum cb_err err; - const struct device * pmu; - const struct drivers_xpowers_axp209_config *cfg; - - /* Find the AXP209 in devicetree */ - pmu = dev_find_slot_on_smbus(AXP209_BUS, AXP209_I2C_ADDR); - if (!pmu) { - printk(BIOS_ERR, "AXP209 not found in devicetree.cb\n"); - return CB_ERR; - } - - cfg = pmu->chip_info; - - /* Mux TWI0 pins */ - gpio_set_multipin_func(GPB, GPB_TWI0_PINS, GPB_TWI0_FUNC); - /* Enable TWI0 */ - a1x_periph_clock_enable(A1X_CLKEN_TWI0); - a1x_twi_init(AXP209_BUS, 400000); - - if ((err = axp209_init(AXP209_BUS)) != CB_SUCCESS) { - printk(BIOS_ERR, "PMU initialization failed\n"); - return err; - } - - if ((err = axp209_set_voltages(AXP209_BUS, cfg)) != CB_SUCCESS) { - printk(BIOS_WARNING, "Power setup incomplete: " - "CPU may hang when increasing clock\n"); - return err; - } - - printk(BIOS_SPEW, "VDD CPU (DCDC2): %imv\n", cfg->dcdc2_voltage_mv); - printk(BIOS_SPEW, "VDD DLL (DCDC3): %imv\n", cfg->dcdc3_voltage_mv); - printk(BIOS_SPEW, "AVCC (LDO2) : %imv\n", cfg->ldo2_voltage_mv); - printk(BIOS_SPEW, "CSI1-IO (LDO4) : %imv\n", cfg->ldo4_voltage_mv); - printk(BIOS_SPEW, "(LDO3) : %imv\n", cfg->ldo3_voltage_mv); - - return CB_SUCCESS; -} - -void main(void) -{ - enum cb_err err; - - console_init(); - - /* Configure power rails */ - err = cubieboard_setup_power(); - - if (err == CB_SUCCESS) { - /* TODO: Get this clock from devicetree.cb */ - a1x_set_cpu_clock(1008); - } else { - /* cubieboard_setup_power() prints more details */ - printk(BIOS_WARNING, "Will run CPU at reduced speed\n"); - a1x_set_cpu_clock(384); - } - - run_ramstage(); -} |