soc/intel/alderlake: Optimize reset handling for non-UFS boot

This patch optimizes the reset handling in the Alder Lake romstage while
disabling the UFS controller in an uni-boot scenario (a unified AP
firmware image can boot both UFS and non-UFS systems).

It introduces a check in `mainboard_expects_another_reset()` to skip
unnecessary resets when a CSE slot switch is due, meaning CSE is not
booting from the RW slot. This saves one reset for non-UFS SKUs when
a CSE slot switch is pending.

The patch also relocates the `cse_fw_sync()` call after disabling the
UFS controllers to ensure the system reset flow can be better optimized
and combined with any expected resets due to CSE synchronization.

TEST=Able to build google/trulo eMMC sku and able to save one reset.

Without this patch:

1. Warm reset after disabling UFS (1st reset)
2. Global reset after CSE sync (2nd reset)
3. Warm reset after disabling UFS (3rd reset)
4. Boot to OS

With this patch:

1. Skip disabling UFS if CSE sync is due, aka no reset.
2. Global reset after CSE sync (1st reset)
3. CSE is booting from slot RW meaning CSE sync is done, perform UFS
   disabling and issue a warm reset after disabling UFS (2nd reset)
4. Boot to OS

Change-Id: I04e6943fb136d126a1d1a829aadb316d2cdd0ac9
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84996
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Jayvik Desai <jayvik@google.com>

0 files changed, 0 insertions, 0 deletions