Add initial support for the Biostar M6TBA.

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2919 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

1 files changed, 129 insertions, 0 deletions

diff --git a/src/mainboard/biostar/m6tba/Config.lb b/src/mainboard/biostar/m6tba/Config.lb
new file mode 100644
index 0000000000..abf28f426e
--- /dev/null
+++ b/src/mainboard/biostar/m6tba/Config.lb
@@ -0,0 +1,129 @@
+##
+## This file is part of the LinuxBIOS project.
+##
+## Copyright (C) 2007 Uwe Hermann <uwe@hermann-uwe.de>
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 2 of the License, or
+## (at your option) any later version.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+##
+
+if USE_FALLBACK_IMAGE
+	default ROM_SECTION_SIZE = FALLBACK_SIZE
+	default ROM_SECTION_OFFSET = (ROM_SIZE - FALLBACK_SIZE)
+else
+	default ROM_SECTION_SIZE = (ROM_SIZE - FALLBACK_SIZE)
+	default ROM_SECTION_OFFSET = 0
+end
+default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE
+				    + ROM_SECTION_OFFSET + 1)
+default PAYLOAD_SIZE = (ROM_SECTION_SIZE - ROM_IMAGE_SIZE)
+default _ROMBASE = (CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE)
+default XIP_ROM_SIZE = 64 * 1024
+default XIP_ROM_BASE = (_ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE)
+arch i386 end
+driver mainboard.o
+if HAVE_PIRQ_TABLE
+	object irq_tables.o
+end
+makerule ./failover.E
+	depends "$(MAINBOARD)/../../../arch/i386/lib/failover.c ./romcc"
+	action "./romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
+end
+makerule ./failover.inc
+	depends "$(MAINBOARD)/../../../arch/i386/lib/failover.c ./romcc"
+	action "./romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
+end
+makerule ./auto.E
+	# depends	"$(MAINBOARD)/auto.c option_table.h ./romcc"
+	depends	"$(MAINBOARD)/auto.c ./romcc"
+	action	"./romcc -E -O -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
+end
+makerule ./auto.inc
+	# depends "$(MAINBOARD)/auto.c option_table.h ./romcc"
+	depends "$(MAINBOARD)/auto.c ./romcc"
+	action	"./romcc -O -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
+end
+mainboardinit cpu/x86/16bit/entry16.inc
+mainboardinit cpu/x86/32bit/entry32.inc
+ldscript /cpu/x86/16bit/entry16.lds
+ldscript /cpu/x86/32bit/entry32.lds
+if USE_FALLBACK_IMAGE
+	mainboardinit cpu/x86/16bit/reset16.inc
+	ldscript /cpu/x86/16bit/reset16.lds
+else
+	mainboardinit cpu/x86/32bit/reset32.inc
+	ldscript /cpu/x86/32bit/reset32.lds
+end
+mainboardinit arch/i386/lib/cpu_reset.inc
+mainboardinit arch/i386/lib/id.inc
+ldscript /arch/i386/lib/id.lds
+if USE_FALLBACK_IMAGE
+	ldscript /arch/i386/lib/failover.lds
+	mainboardinit ./failover.inc
+end
+mainboardinit cpu/x86/fpu/enable_fpu.inc
+mainboardinit cpu/x86/mmx/enable_mmx.inc
+mainboardinit ./auto.inc
+mainboardinit cpu/x86/mmx/disable_mmx.inc
+
+dir /pc80
+config chip.h
+
+chip northbridge/intel/i440bx		# Northbridge
+  device apic_cluster 0 on		# APIC cluster
+    chip cpu/intel/slot_2		# CPU (FIXME: It's slot 1, actually)
+      device apic 0 on end		# APIC
+    end
+  end
+  device pci_domain 0 on		# PCI domain
+    device pci 0.0 on end		# Host bridge
+    device pci 1.0 on end		# PCI/AGP bridge
+    chip southbridge/intel/i82371eb	# Southbridge
+      device pci 7.0 on			# ISA bridge
+        chip superio/smsc/smscsuperio	# Super I/O
+          device pnp 3f0.0 on		# Floppy
+            io 0x60 = 0x3f0
+            irq 0x70 = 6
+            drq 0x74 = 2
+          end
+          device pnp 3f0.3 on		# Parallel port
+            io 0x60 = 0x378
+            irq 0x70 = 7
+          end
+          device pnp 3f0.4 on		# COM1
+            io 0x60 = 0x3f8
+            irq 0x70 = 4
+          end
+          device pnp 3f0.5 on		# COM2 / IR
+            io 0x60 = 0x2f8
+            irq 0x70 = 3
+          end
+          device pnp 3f0.7 on		# PS/2 keyboard / mouse
+            io 0x60 = 0x60
+            io 0x62 = 0x64
+            irq 0x70 = 1		# PS/2 keyboard interrupt
+            irq 0x72 = 12		# PS/2 mouse interrupt
+          end
+          device pnp 3f0.8 on		# Aux I/O
+          end
+        end
+      end
+      device pci 7.1 on	end		# IDE
+      device pci 7.2 on	end		# USB
+      device pci 7.3 on end		# ACPI
+      register "ide0_enable" = "1"
+      register "ide1_enable" = "1"
+    end
+  end
+end