diff options
| author | Elyes HAOUAS <ehaouas@noos.fr> | 2020-06-04 10:15:50 +0200 |
|---|---|---|
| committer | Nico Huber <nico.h@gmx.de> | 2020-06-18 09:10:53 +0000 |
| commit | 7ac76ecf9127d2b58467a49746b9fc112dd4ef4c (patch) | |
| tree | 3a0d9e3701fc96305d25115d77ad1d38c87be57f /src/mainboard/bap | |
| parent | 6abee842504bc41e1915d19588edeb62d3e0dca7 (diff) | |
mb/bap/ode_e21XX: Drop left over unmaintained ROMCC board
Remove unmaintained and unsupported old ROMCC board.
This board wasn't hooked up for build.
Change-Id: Idd907311dde187aa62d29a9d3943b6d5c08a1f71
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42071
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Diffstat (limited to 'src/mainboard/bap')
27 files changed, 0 insertions, 2157 deletions
diff --git a/src/mainboard/bap/Kconfig b/src/mainboard/bap/Kconfig index a262952cf6..44b02e21ca 100644 --- a/src/mainboard/bap/Kconfig +++ b/src/mainboard/bap/Kconfig @@ -7,9 +7,6 @@ choice source "src/mainboard/bap/*/Kconfig.name" -config BAP_BOARDS_DISABLED - bool "Boards from vendor are disabled" - endchoice source "src/mainboard/bap/*/Kconfig" diff --git a/src/mainboard/bap/ode_e21XX/BAP_Q7_1066.spd.hex b/src/mainboard/bap/ode_e21XX/BAP_Q7_1066.spd.hex deleted file mode 100644 index b6da468a88..0000000000 --- a/src/mainboard/bap/ode_e21XX/BAP_Q7_1066.spd.hex +++ /dev/null @@ -1,217 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only - -# Memory chip: Hynix H5TQ4G63MFR-PBC with ECC -# BAP ODE E21XX has 2GB RAM soldered down on the Q7 -# Memory setting for DDR-1066 - -# 0 Number of SPD Bytes used / Total SPD Size / CRC Coverage -# bits[3:0]: 1 = 128 SPD Bytes Used -# bits[6:4]: 1 = 256 SPD Bytes Total -# bit7 : 0 = CRC covers bytes 0 ~ 125 -11 - -# 1 SPD Revision - -# 0x12 = Revision 1.2 -12 - -# 2 Key Byte / DRAM Device Type -# bits[7:0]: 0x0b = DDR3 SDRAM -0B - -# 3 Key Byte / Module Type -# bits[3:0]: 3 = SO-DIMM -# bits[7:4]: reserved -03 - -# 4 SDRAM CHIP Density and Banks -# bits[3:0]: 4 = 4 Gigabits Total SDRAM capacity per chip -# bits[6:4]: 0 = 3 (8 banks) -# bit7 : reserved -04 - -# 5 SDRAM Addressing -# bits[2:0]: 1 = 10 Column Address Bits -# bits[5:3]: 3 = 15 Row Address Bits -# bits[7:6]: reserved -19 - -# 6 Module Nominal Voltage, VDD -# bit0 : 0 = 1.5 V operable -# bit1 : 0 = NOT 1.35 V operable -# bit2 : 0 = NOT 1.25 V operable -# bits[7:3]: reserved -00 - -# 7 Module Organization -# bits[2:0]: 2 = 16 bits -# bits[5:3]: 0 = 1 Rank -# bits[7:6]: reserved -02 - -# 8 Module Memory Bus Width -# bits[2:0]: 3 = Primary bus width is 64 bits -# bits[4:3]: 1 = 1 bit (bus width extension ECC) -# bits[7:5]: reserved -0B - -# 9 Fine Timebase (FTB) Dividend / Divisor -# bits[3:0]: 0x01 divisor -# bits[7:4]: 0x01 dividend -# 1/1 = 1ps -11 - -# 10 Medium Timebase (MTB) Dividend -# 11 Medium Timebase (MTB) Divisor -# 1 / 8 = .125 ns - used for DDR3 -01 08 - -# 12 SDRAM Minimum Cycle Time (tCKmin) -# 0x0F = tCKmin of 1.875 ns = DDR3-1066 (533 MHz clock) -0F - -# 13 Reserved -00 - -# 14 CAS Latencies Supported, Least Significant Byte -# 15 CAS Latencies Supported, Most Significant Byte -# Cas Latencies of 8 - 5 are supported -1E 00 - -# 16 Minimum CAS Latency Time (tAAmin) -# 0x69 = 13.125ns - DDR3-1066F -69 - -# 17 Minimum Write Recovery Time (tWRmin) -# 0x78 = tWR of 15ns - All DDR3 speed grades -78 - -# 18 Minimum RAS# to CAS# Delay Time (tRCDmin) -# 0x69 = 13.125ns - DDR3-1066F -69 - -# 19 Minimum Row Active to Row Active Delay Time (tRRDmin) -# 0x3C = 7.5ns -3C - -# 20 Minimum Row Precharge Delay Time (tRPmin) -# 0x69 = 13.125ns - DDR3-1066F -69 - -# 21 Upper Nibbles for tRAS and tRC -# bits[3:0]: tRAS most significant nibble = 1 (see byte 22) -# bits[7:4]: tRC most significant nibble = 1 (see byte 23) -11 - -# 22 Minimum Active to Precharge Delay Time (tRASmin), LSB -# 0x12C = 37.5ns - DDR3-1066 (see byte 21) -2C - -# 23 Minimum Active to Active/Refresh Delay Time (tRCmin), LSB -# 0x195 = 50.625ns - DDR3-1066F (see byte 21) -95 - -# 24 Minimum Refresh Recovery Delay Time (tRFCmin), LSB -# 25 Minimum Refresh Recovery Delay Time (tRFCmin), MSB -# 0x500 = 160ns - for 2 Gigabit chips -80 07 - -# 26 Minimum Internal Write to Read Command Delay Time (tWTRmin) -# 0x3c = 7.5 ns - All DDR3 SDRAM speed bins -3C - -# 27 Minimum Internal Read to Precharge Command Delay Time (tRTPmin) -# 0x3c = 7.5ns - All DDR3 SDRAM speed bins -3C - -# 28 Upper Nibble for tFAWmin -# 29 Minimum Four Activate Window Delay Time (tFAWmin) -# 0x0190 = 50ns - DDR3-1066, 2 KB page size -01 90 - -# 30 SDRAM Optional Feature -# bit0 : 1= RZQ/6 supported -# bit1 : 1 = RZQ/7 supported -# bits[6:2]: reserved -# bit7 : 0 = DLL Off mode supported -03 - -# 31 SDRAM Thermal and Refresh Options -# bit0 : 0 = Temp up to 95c supported -# bit1 : 0 = 85-95c uses 2x refresh rate -# bit2 : 1 = Auto Self Refresh supported -# bit3 : 0 = no on die thermal sensor -# bits[6:4]: reserved -# bit7 : 0 = partial self refresh supported -04 - -# 32 Module Thermal Sensor -# 0 = Thermal sensor not incorporated onto this assembly -00 - -# 33 SDRAM Device Type -# bits[1:0]: 0 = Signal Loading not specified -# bits[3:2]: reserved -# bits[6:4]: 0 = Die count not specified -# bit7 : 0 = Standard Monolithic DRAM Device -00 - -# 34 Fine Offset for SDRAM Minimum Cycle Time (tCKmin) -# 35 Fine Offset for Minimum CAS Latency Time (tAAmin) -# 36 Fine Offset for Minimum RAS# to CAS# Delay Time (tRCDmin) -# 37 Fine Offset for Minimum Row Precharge Delay Time (tRPmin) -# 38 Fine Offset for Minimum Active to Active/Refresh Delay (tRCmin) -00 00 00 00 00 - -# 39 - 59 (reserved) -00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 -00 00 00 00 00 - -# 60 Raw Card Extension, Module Nominal Height -# bits[4:0]: 0 = <= 15mm tall -# bits[7:5]: 0 = raw card revision 0-3 -00 - -# 61 Module Maximum Thickness -# bits[3:0]: 0 = thickness front <= 1mm -# bits[7:4]: 0 = thinkness back <= 1mm -00 - -# 62 Reference Raw Card Used -# bits[4:0]: 0 = Reference Raw card A used -# bits[6:5]: 0 = revision 0 -# bit7 : 0 = Reference raw cards A through AL -00 - -# 63 Address Mapping from Edge Connector to DRAM -# bit0 : 0 = standard mapping (not mirrored) -# bits[7:1]: reserved -00 - -# 64 - 116 (reserved) -00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 -00 00 00 00 00 - -# 117 - 118 Module ID: Module Manufacturers JEDEC ID Code -# 0x80AD = Hynix -80 AD - -# 119 Module ID: Module Manufacturing Location - oem specified -# 120 Module ID: Module Manufacture Year in BCD -# 0x00 = 2000 -00 00 - -# 121 Module ID: Module Manufacture week -# 0x00 = 0th week -00 - -# 122 - 125: Module Serial Number -00 00 00 00 - -# 126 - 127: Cyclical Redundancy Code -E9 40 diff --git a/src/mainboard/bap/ode_e21XX/BAP_Q7_1333.spd.hex b/src/mainboard/bap/ode_e21XX/BAP_Q7_1333.spd.hex deleted file mode 100644 index bfd15cc55c..0000000000 --- a/src/mainboard/bap/ode_e21XX/BAP_Q7_1333.spd.hex +++ /dev/null @@ -1,217 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only - -# Memory chip: Hynix H5TQ4G63MFR-PBC with ECC -# BAP ODE E21XX has 2GB RAM soldered down on the Q7 -# Memory setting for DDR-1333 - -# 0 Number of SPD Bytes used / Total SPD Size / CRC Coverage -# bits[3:0]: 1 = 128 SPD Bytes Used -# bits[6:4]: 1 = 256 SPD Bytes Total -# bit7 : 0 = CRC covers bytes 0 ~ 125 -11 - -# 1 SPD Revision - -# 0x13 = Revision 1.3 -13 - -# 2 Key Byte / DRAM Device Type -# bits[7:0]: 0x0b = DDR3 SDRAM -0B - -# 3 Key Byte / Module Type -# bits[3:0]: 3 = SO-DIMM -# bits[7:4]: reserved -03 - -# 4 SDRAM CHIP Density and Banks -# bits[3:0]: 4 = 4 Gigabits Total SDRAM capacity per chip -# bits[6:4]: 0 = 3 (8 banks) -# bit7 : reserved -04 - -# 5 SDRAM Addressing -# bits[2:0]: 1 = 10 Column Address Bits -# bits[5:3]: 3 = 15 Row Address Bits -# bits[7:6]: reserved -19 - -# 6 Module Nominal Voltage, VDD -# bit0 : 0 = 1.5 V operable -# bit1 : 0 = NOT 1.35 V operable -# bit2 : 0 = NOT 1.25 V operable -# bits[7:3]: reserved -00 - -# 7 Module Organization -# bits[2:0]: 2 = 16 bits -# bits[5:3]: 0 = 1 Rank -# bits[7:6]: reserved -02 - -# 8 Module Memory Bus Width -# bits[2:0]: 3 = Primary bus width is 64 bits -# bits[4:3]: 1 = 1 bit (bus width extension ECC) -# bits[7:5]: reserved -0B - -# 9 Fine Timebase (FTB) Dividend / Divisor -# bits[3:0]: 0x01 divisor -# bits[7:4]: 0x01 dividend -# 1/1 = 1ps -11 - -# 10 Medium Timebase (MTB) Dividend -# 11 Medium Timebase (MTB) Divisor -# 1 / 8 = .125 ns - used for DDR3 -01 08 - -# 12 SDRAM Minimum Cycle Time (tCKmin) -# 0x0C = tCKmin of 1.5 ns = DDR3-1333 (667 MHz clock) -0C - -# 13 Reserved -00 - -# 14 CAS Latencies Supported, Least Significant Byte -# 15 CAS Latencies Supported, Most Significant Byte -# Cas Latencies of 9 - 5 are supported (no 7) -36 00 - -# 16 Minimum CAS Latency Time (tAAmin) -# 0x6C = 13.5ns - DDR3-1333H -6C - -# 17 Minimum Write Recovery Time (tWRmin) -# 0x78 = tWR of 15ns - All DDR3 speed grades -78 - -# 18 Minimum RAS# to CAS# Delay Time (tRCDmin) -# 0x6C = 13.5ns - DDR3-1333H -6C - -# 19 Minimum Row Active to Row Active Delay Time (tRRDmin) -# 0x3C = 7.5ns -3C - -# 20 Minimum Row Precharge Delay Time (tRPmin) -# 0x6C = 13.5ns - DDR3-1333H -6C - -# 21 Upper Nibbles for tRAS and tRC -# bits[3:0]: tRAS most significant nibble = 1 (see byte 22) -# bits[7:4]: tRC most significant nibble = 1 (see byte 23) -11 - -# 22 Minimum Active to Precharge Delay Time (tRASmin), LSB -# 0x120 = 36ns - DDR3-1333 (see byte 21) -20 - -# 23 Minimum Active to Active/Refresh Delay Time (tRCmin), LSB -# 0x18C = 49.5ns - DDR3-1333H (see byte 21) -8C - -# 24 Minimum Refresh Recovery Delay Time (tRFCmin), LSB -# 25 Minimum Refresh Recovery Delay Time (tRFCmin), MSB -# 0x500 = 160ns - for 2 Gigabit chips -80 07 - -# 26 Minimum Internal Write to Read Command Delay Time (tWTRmin) -# 0x3c = 7.5 ns - All DDR3 SDRAM speed bins -3C - -# 27 Minimum Internal Read to Precharge Command Delay Time (tRTPmin) -# 0x3c = 7.5ns - All DDR3 SDRAM speed bins -3C - -# 28 Upper Nibble for tFAWmin -# 29 Minimum Four Activate Window Delay Time (tFAWmin) -# 0x0168 = 45ns - DDR3-1333, 2 KB page size -01 68 - -# 30 SDRAM Optional Feature -# bit0 : 1= RZQ/6 supported -# bit1 : 1 = RZQ/7 supported -# bits[6:2]: reserved -# bit7 : 0 = DLL Off mode supported -03 - -# 31 SDRAM Thermal and Refresh Options -# bit0 : 0 = Temp up to 95c supported -# bit1 : 0 = 85-95c uses 2x refresh rate -# bit2 : 1 = Auto Self Refresh supported -# bit3 : 0 = no on die thermal sensor -# bits[6:4]: reserved -# bit7 : 0 = partial self refresh supported -04 - -# 32 Module Thermal Sensor -# 0 = Thermal sensor not incorporated onto this assembly -00 - -# 33 SDRAM Device Type -# bits[1:0]: 0 = Signal Loading not specified -# bits[3:2]: reserved -# bits[6:4]: 0 = Die count not specified -# bit7 : 0 = Standard Monolithic DRAM Device -00 - -# 34 Fine Offset for SDRAM Minimum Cycle Time (tCKmin) -# 35 Fine Offset for Minimum CAS Latency Time (tAAmin) -# 36 Fine Offset for Minimum RAS# to CAS# Delay Time (tRCDmin) -# 37 Fine Offset for Minimum Row Precharge Delay Time (tRPmin) -# 38 Fine Offset for Minimum Active to Active/Refresh Delay (tRCmin) -00 00 00 00 00 - -# 39 - 59 (reserved) -00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 -00 00 00 00 00 - -# 60 Raw Card Extension, Module Nominal Height -# bits[4:0]: 0 = <= 15mm tall -# bits[7:5]: 0 = raw card revision 0-3 -00 - -# 61 Module Maximum Thickness -# bits[3:0]: 0 = thickness front <= 1mm -# bits[7:4]: 0 = thinkness back <= 1mm -00 - -# 62 Reference Raw Card Used -# bits[4:0]: 0 = Reference Raw card A used -# bits[6:5]: 0 = revision 0 -# bit7 : 0 = Reference raw cards A through AL -00 - -# 63 Address Mapping from Edge Connector to DRAM -# bit0 : 0 = standard mapping (not mirrored) -# bits[7:1]: reserved -00 - -# 64 - 116 (reserved) -00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 -00 00 00 00 00 - -# 117 - 118 Module ID: Module Manufacturers JEDEC ID Code -# 0x80AD = Hynix -80 AD - -# 119 Module ID: Module Manufacturing Location - oem specified -# 120 Module ID: Module Manufacture Year in BCD -# 0x00 = 2000 -00 00 - -# 121 Module ID: Module Manufacture week -# 0x00 = 0th week -00 - -# 122 - 125: Module Serial Number -00 00 00 00 - -# 126 - 127: Cyclical Redundancy Code -95 b9 diff --git a/src/mainboard/bap/ode_e21XX/BAP_Q7_800.spd.hex b/src/mainboard/bap/ode_e21XX/BAP_Q7_800.spd.hex deleted file mode 100644 index 8b61fcbd78..0000000000 --- a/src/mainboard/bap/ode_e21XX/BAP_Q7_800.spd.hex +++ /dev/null @@ -1,217 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only - -# Memory chip: Hynix H5TQ4G63MFR-PBC with ECC -# BAP ODE E21XX has 2GB RAM soldered down on the Q7 -# Memory setting for DDR-800 - -# 0 Number of SPD Bytes used / Total SPD Size / CRC Coverage -# bits[3:0]: 1 = 128 SPD Bytes Used -# bits[6:4]: 1 = 256 SPD Bytes Total -# bit7 : 0 = CRC covers bytes 0 ~ 125 -11 - -# 1 SPD Revision - -# 0x11 = Revision 1.1 -11 - -# 2 Key Byte / DRAM Device Type -# bits[7:0]: 0x0b = DDR3 SDRAM -0B - -# 3 Key Byte / Module Type -# bits[3:0]: 3 = SO-DIMM -# bits[7:4]: reserved -03 - -# 4 SDRAM CHIP Density and Banks -# bits[3:0]: 4 = 4 Gigabits Total SDRAM capacity per chip -# bits[6:4]: 0 = 3 (8 banks) -# bit7 : reserved -04 - -# 5 SDRAM Addressing -# bits[2:0]: 1 = 10 Column Address Bits -# bits[5:3]: 3 = 15 Row Address Bits -# bits[7:6]: reserved -19 - -# 6 Module Nominal Voltage, VDD -# bit0 : 0 = 1.5 V operable -# bit1 : 0 = NOT 1.35 V operable -# bit2 : 0 = NOT 1.25 V operable -# bits[7:3]: reserved -00 - -# 7 Module Organization -# bits[2:0]: 2 = 16 bits -# bits[5:3]: 0 = 1 Rank -# bits[7:6]: reserved -02 - -# 8 Module Memory Bus Width -# bits[2:0]: 3 = Primary bus width is 64 bits -# bits[4:3]: 1 = 1 bit (bus width extension ECC) -# bits[7:5]: reserved -0B - -# 9 Fine Timebase (FTB) Dividend / Divisor -# bits[3:0]: 0x01 divisor -# bits[7:4]: 0x01 dividend -# 1/1 = 1ps -11 - -# 10 Medium Timebase (MTB) Dividend -# 11 Medium Timebase (MTB) Divisor -# 1 / 8 = .125 ns - used for DDR3 -01 08 - -# 12 SDRAM Minimum Cycle Time (tCKmin) -# 0x14 = tCKmin of 2.5 ns = DDR3-800 (400 MHz clock) -14 - -# 13 Reserved -00 - -# 14 CAS Latencies Supported, Least Significant Byte -# 15 CAS Latencies Supported, Most Significant Byte -# CAS Latencies of 6 - 5 are supported -06 00 - -# 16 Minimum CAS Latency Time (tAAmin) -# 0x78 = 15ns - DDR3-800E -78 - -# 17 Minimum Write Recovery Time (tWRmin) -# 0x78 = tWR of 15ns - All DDR3 speed grades -78 - -# 18 Minimum RAS# to CAS# Delay Time (tRCDmin) -# 0x6E = 15ns - DDR3-800E -78 - -# 19 Minimum Row Active to Row Active Delay Time (tRRDmin) -# 0x3C = 7.5ns -3C - -# 20 Minimum Row Precharge Delay Time (tRPmin) -# 0x6E = 15ns - DDR3-800E -78 - -# 21 Upper Nibbles for tRAS and tRC -# bits[3:0]: tRAS most significant nibble = 1 (see byte 22) -# bits[7:4]: tRC most significant nibble = 1 (see byte 23) -11 - -# 22 Minimum Active to Precharge Delay Time (tRASmin), LSB -# 0x12C = 37.5ns - DDR3-800E (see byte 21) -2C - -# 23 Minimum Active to Active/Refresh Delay Time (tRCmin), LSB -# 0x1A4 = 52.5ns - DDR3-800E (see byte 21) -A4 - -# 24 Minimum Refresh Recovery Delay Time (tRFCmin), LSB -# 25 Minimum Refresh Recovery Delay Time (tRFCmin), MSB -# 0x780 = 208ns - for 4 Gigabit chips -80 07 - -# 26 Minimum Internal Write to Read Command Delay Time (tWTRmin) -# 0x3c = 7.5 ns - All DDR3 SDRAM speed bins -3C - -# 27 Minimum Internal Read to Precharge Command Delay Time (tRTPmin) -# 0x3c = 7.5ns - All DDR3 SDRAM speed bins -3C - -# 28 Upper Nibble for tFAWmin -# 29 Minimum Four Activate Window Delay Time (tFAWmin) -# 0x0190 = 50ns - DDR3-800, 2 KB page size -01 90 - -# 30 SDRAM Optional Feature -# bit0 : 1= RZQ/6 supported -# bit1 : 1 = RZQ/7 supported -# bits[6:2]: reserved -# bit7 : 0 = DLL Off mode supported -03 - -# 31 SDRAM Thermal and Refresh Options -# bit0 : 0 = Temp up to 95c supported -# bit1 : 0 = 85-95c uses 2x refresh rate -# bit2 : 1 = Auto Self Refresh supported -# bit3 : 0 = no on die thermal sensor -# bits[6:4]: reserved -# bit7 : 0 = partial self refresh supported -04 - -# 32 Module Thermal Sensor -# 0 = Thermal sensor not incorporated onto this assembly -00 - -# 33 SDRAM Device Type -# bits[1:0]: 0 = Signal Loading not specified -# bits[3:2]: reserved -# bits[6:4]: 0 = Die count not specified -# bit7 : 0 = Standard Monolithic DRAM Device -00 - -# 34 Fine Offset for SDRAM Minimum Cycle Time (tCKmin) -# 35 Fine Offset for Minimum CAS Latency Time (tAAmin) -# 36 Fine Offset for Minimum RAS# to CAS# Delay Time (tRCDmin) -# 37 Fine Offset for Minimum Row Precharge Delay Time (tRPmin) -# 38 Fine Offset for Minimum Active to Active/Refresh Delay (tRCmin) -00 00 00 00 00 - -# 39 - 59 (reserved) -00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 -00 00 00 00 00 - -# 60 Raw Card Extension, Module Nominal Height -# bits[4:0]: 0 = <= 15mm tall -# bits[7:5]: 0 = raw card revision 0-3 -00 - -# 61 Module Maximum Thickness -# bits[3:0]: 0 = thickness front <= 1mm -# bits[7:4]: 0 = thinkness back <= 1mm -00 - -# 62 Reference Raw Card Used -# bits[4:0]: 0 = Reference Raw card A used -# bits[6:5]: 0 = revision 0 -# bit7 : 0 = Reference raw cards A through AL -00 - -# 63 Address Mapping from Edge Connector to DRAM -# bit0 : 0 = standard mapping (not mirrored) -# bits[7:1]: reserved -00 - -# 64 - 116 (reserved) -00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 -00 00 00 00 00 - -# 117 - 118 Module ID: Module Manufacturers JEDEC ID Code -# 0x80AD = Hynix -80 AD - -# 119 Module ID: Module Manufacturing Location - oem specified -# 120 Module ID: Module Manufacture Year in BCD -# 0x00 = 2000 -00 00 - -# 121 Module ID: Module Manufacture week -# 0x00 = 0th week -00 - -# 122 - 125: Module Serial Number -00 00 00 00 - -# 126 - 127: Cyclical Redundancy Code -48 91 diff --git a/src/mainboard/bap/ode_e21XX/BiosCallOuts.c b/src/mainboard/bap/ode_e21XX/BiosCallOuts.c deleted file mode 100644 index faf3b95f39..0000000000 --- a/src/mainboard/bap/ode_e21XX/BiosCallOuts.c +++ /dev/null @@ -1,313 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -#include <AGESA.h> -#include <console/console.h> -#include <northbridge/amd/agesa/BiosCallOuts.h> -#include <FchPlatform.h> -#include <spd_bin.h> - -#include "imc.h" -#include "hudson.h" - -static AGESA_STATUS Fch_Oem_config(UINT32 Func, UINTN FchData, VOID *ConfigPtr); -static AGESA_STATUS board_ReadSpd_from_cbfs(UINT32 Func, UINTN Data, VOID *ConfigPtr); - -const BIOS_CALLOUT_STRUCT BiosCallouts[] = -{ - {AGESA_READ_SPD, board_ReadSpd_from_cbfs }, - {AGESA_DO_RESET, agesa_Reset }, - {AGESA_READ_SPD_RECOVERY, agesa_NoopUnsupported }, - {AGESA_RUNFUNC_ONAP, agesa_RunFuncOnAp }, - {AGESA_GET_IDS_INIT_DATA, agesa_EmptyIdsInitData }, - {AGESA_HOOKBEFORE_DQS_TRAINING, agesa_NoopSuccess }, - {AGESA_HOOKBEFORE_EXIT_SELF_REF, agesa_NoopSuccess }, - {AGESA_FCH_OEM_CALLOUT, Fch_Oem_config }, - {AGESA_GNB_GFX_GET_VBIOS_IMAGE, agesa_GfxGetVbiosImage } -}; -const int BiosCalloutsLen = ARRAY_SIZE(BiosCallouts); - -/** - * Realtek ALC272 CODEC Verb Table - */ -static const CODEC_ENTRY Alc272_VerbTbl[] = { - {0x11, 0x411111F0}, // - SPDIF_OUT2 - {0x12, 0x411111F0}, // - DMIC_1/2 - {0x13, 0x411111F0}, // - DMIC_3/4 - {0x14, 0x411111F0}, // Port D - LOUT1 - {0x15, 0x411111F0}, // Port A - LOUT2 - {0x16, 0x411111F0}, // - {0x17, 0x411111F0}, // Port H - MONO - {0x18, 0x01a19840}, // Port B - MIC1 - {0x19, 0x411111F0}, // Port F - MIC2 - {0x1a, 0x01813030}, // Port C - LINE1 - {0x1b, 0x411111F0}, // Port E - LINE2 - {0x1d, 0x40251E05}, // - PCBEEP - {0x1e, 0x01441120}, // - SPDIF_OUT1 - {0x21, 0x01214010}, // Port I - HPOUT - {0xff, 0xffffffff} -}; - -static const CODEC_TBL_LIST CodecTableList[] = -{ - {0x10ec0272, (CODEC_ENTRY*)&Alc272_VerbTbl[0]}, - {(UINT32)0x0FFFFFFFF, (CODEC_ENTRY*)0x0FFFFFFFFUL} -}; - -#define FAN_INPUT_INTERNAL_DIODE 0 -#define FAN_INPUT_TEMP0 1 -#define FAN_INPUT_TEMP1 2 -#define FAN_INPUT_TEMP2 3 -#define FAN_INPUT_TEMP3 4 -#define FAN_INPUT_TEMP0_FILTER 5 -#define FAN_INPUT_ZERO 6 -#define FAN_INPUT_DISABLED 7 - -#define FAN_AUTOMODE (1 << 0) -#define FAN_LINEARMODE (1 << 1) -#define FAN_STEPMODE ~(1 << 1) -#define FAN_POLARITY_HIGH (1 << 2) -#define FAN_POLARITY_LOW ~(1 << 2) - -/* Normally, 4-wire fan runs at 25KHz and 3-wire fan runs at 100Hz */ -#define FREQ_28KHZ 0x0 -#define FREQ_25KHZ 0x1 -#define FREQ_23KHZ 0x2 -#define FREQ_21KHZ 0x3 -#define FREQ_29KHZ 0x4 -#define FREQ_18KHZ 0x5 -#define FREQ_100HZ 0xF7 -#define FREQ_87HZ 0xF8 -#define FREQ_58HZ 0xF9 -#define FREQ_44HZ 0xFA -#define FREQ_35HZ 0xFB -#define FREQ_29HZ 0xFC -#define FREQ_22HZ 0xFD -#define FREQ_14HZ 0xFE -#define FREQ_11HZ 0xFF - -/* - * Hardware Monitor Fan Control - * Hardware limitation: - * HWM will fail to read the input temperature via I2C if other - * software switches the I2C address. AMD recommends using IMC - * to control fans, instead of HWM. - */ -static void oem_fan_control(FCH_DATA_BLOCK *FchParams) -{ - FCH_HWM_FAN_CTR oem_factl[5] = { - /*temperature input, fan mode, frequency, low_duty, med_duty, multiplier, lowtemp, medtemp, hightemp, LinearRange, LinearHoldCount */ - /* DB-FT3 FanOUT0 Fan header J32 */ - {FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0}, - /* DB-FT3 FanOUT1 Fan header J31*/ - {FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0}, - {FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0}, - {FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0}, - {FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0}, - }; - LibAmdMemCopy ((VOID *)(FchParams->Hwm.HwmFanControl), &oem_factl, (sizeof(FCH_HWM_FAN_CTR) * 5), FchParams->StdHeader); - - /* Enable IMC fan control. the recommended way */ - if (CONFIG(HUDSON_IMC_FWM)) { - /* HwMonitorEnable = TRUE && HwmFchtsiAutoOpll ==FALSE to call FchECfancontrolservice */ - FchParams->Hwm.HwMonitorEnable = TRUE; - FchParams->Hwm.HwmFchtsiAutoPoll = FALSE; /* 0 disable, 1 enable TSI Auto Polling */ - - FchParams->Imc.ImcEnable = TRUE; - FchParams->Hwm.HwmControl = 1; /* 1 IMC, 0 HWM */ - FchParams->Imc.ImcEnableOverWrite = 1; /* 2 disable IMC, 1 enable IMC, 0 following hw strap setting */ - - LibAmdMemFill(&(FchParams->Imc.EcStruct), 0, sizeof(FCH_EC), FchParams->StdHeader); - - /* Thermal Zone Parameter */ - FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg0 = 0x00; - FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg1 = 0x00; /* Zone */ - FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg2 = 0x3d; //BIT0 | BIT2 | BIT5; - FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg3 = 0x4e; //6 | BIT3; - FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg4 = 0x00; - FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg5 = 0x04; - FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg6 = 0x9a; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */ - FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg7 = 0x01; - FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg8 = 0x01; /* PWM stepping rate in unit of PWM level percentage */ - FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg9 = 0x00; - - /* IMC Fan Policy temperature thresholds */ - FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg0 = 0x00; - FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg1 = 0x00; /* Zone */ - FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg2 = 0x46; /*AC0 threshold in Celsius */ - FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg3 = 0x3c; /*AC1 threshold in Celsius */ - FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg4 = 0x32; /*AC2 threshold in Celsius */ - FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg5 = 0xff; /*AC3 threshold in Celsius, 0xFF is not define */ - FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg6 = 0xff; /*AC4 threshold in Celsius, 0xFF is not define */ - FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg7 = 0xff; /*AC5 threshold in Celsius, 0xFF is not define */ - FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg8 = 0xff; /*AC6 threshold in Celsius, 0xFF is not define */ - FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg9 = 0xff; /*AC7 lowest threshold in Celsius, 0xFF is not define */ - FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegA = 0x4b; /*critical threshold* in Celsius, 0xFF is not define */ - FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegB = 0x00; - - /* IMC Fan Policy PWM Settings */ - FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg0 = 0x00; - FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg1 = 0x00; /* Zone */ - FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg2 = 0x5a; /* AL0 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg3 = 0x46; /* AL1 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg4 = 0x28; /* AL2 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg5 = 0xff; /* AL3 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg6 = 0xff; /* AL4 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg7 = 0xff; /* AL5 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg8 = 0xff; /* AL6 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg9 = 0xff; /* AL7 percentage */ - - FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg0 = 0x00; - FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg1 = 0x01; /* Zone */ - FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg2 = 0x55; //BIT0 | BIT2 | BIT5; - FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg3 = 0x17; - FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg4 = 0x00; - FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg5 = 0x00; - FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg6 = 0x90; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */ - FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg7 = 0; - FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg8 = 0; /* PWM stepping rate in unit of PWM level percentage */ - FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg9 = 0; - - FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg0 = 0x00; - FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg1 = 0x01; /* zone */ - FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg2 = 60; /*AC0 threshold in Celsius */ - FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg3 = 40; /*AC1 threshold in Celsius */ - FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg4 = 0; /*AC2 threshold in Celsius */ - FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg5 = 0; /*AC3 threshold in Celsius, 0xFF is not define */ - FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg6 = 0; /*AC4 threshold in Celsius, 0xFF is not define */ - FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg7 = 0; /*AC5 threshold in Celsius, 0xFF is not define */ - FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg8 = 0; /*AC6 threshold in Celsius, 0xFF is not define */ - FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg9 = 0; /*AC7 lowest threshold in Celsius, 0xFF is not define */ - FchParams->Imc.EcStruct.MsgFun83Zone1MsgRegA = 0; /*critical threshold* in Celsius, 0xFF is not define */ - FchParams->Imc.EcStruct.MsgFun83Zone1MsgRegB = 0x00; - - FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg0 = 0x00; - FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg1 = 0x01; /*Zone */ - FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg2 = 0; /* AL0 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg3 = 0; /* AL1 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg4 = 0; /* AL2 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg5 = 0x00; /* AL3 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg6 = 0x00; /* AL4 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg7 = 0x00; /* AL5 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg8 = 0x00; /* AL6 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg9 = 0x00; /* AL7 percentage */ - - FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg0 = 0x00; - FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg1 = 0x2; /* Zone */ - FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg2 = 0x0; //BIT0 | BIT2 | BIT5; - FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg3 = 0x0; - FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg4 = 0x00; - FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg5 = 0x00; - FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg6 = 0x98; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */ - FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg7 = 2; - FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg8 = 5; /* PWM stepping rate in unit of PWM level percentage */ - FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg9 = 0; - - FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg0 = 0x00; - FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg1 = 0x3; /* Zone */ - FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg2 = 0x0; //BIT0 | BIT2 | BIT5; - FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg3 = 0x0; - FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg4 = 0x00; - FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg5 = 0x00; - FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg6 = 0x0; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */ - FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg7 = 0; - FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg8 = 0; /* PWM stepping rate in unit of PWM level percentage */ - FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg9 = 0; - - /* IMC Function */ - FchParams->Imc.EcStruct.IMCFUNSupportBitMap = 0x333; //BIT0 | BIT4 |BIT8; - - /* NOTE: - * FchInitLateHwm will overwrite the EcStruct with EcDefaultMessage, - * AGESA put EcDefaultMessage as global data in ROM, so we can't override it. - * so we remove it from AGESA code. Please See FchInitLateHwm. - */ - } else { - /* HWM fan control, using the alternative method */ - FchParams->Imc.ImcEnable = FALSE; - FchParams->Hwm.HwMonitorEnable = TRUE; - FchParams->Hwm.HwmFchtsiAutoPoll = TRUE; /* 1 enable, 0 disable TSI Auto Polling */ - } -} - -/** - * Fch Oem setting callback - * - * Configure platform specific Hudson device, - * such Azalia, SATA, IMC etc. - */ -static AGESA_STATUS Fch_Oem_config(UINT32 Func, UINTN FchData, VOID *ConfigPtr) -{ - AMD_CONFIG_PARAMS *StdHeader = (AMD_CONFIG_PARAMS *)ConfigPtr; - if (StdHeader->Func == AMD_INIT_RESET) { - FCH_RESET_DATA_BLOCK *FchParams = (FCH_RESET_DATA_BLOCK *) FchData; - printk(BIOS_DEBUG, "Fch OEM config in INIT RESET "); - //FchParams_reset->EcChannel0 = TRUE; /* logical devicd 3 */ - FchParams->LegacyFree = CONFIG(HUDSON_LEGACY_FREE); - FchParams->FchReset.SataEnable = hudson_sata_enable(); - FchParams->FchReset.IdeEnable = hudson_ide_enable(); - FchParams->FchReset.Xhci0Enable = CONFIG(HUDSON_XHCI_ENABLE); - FchParams->FchReset.Xhci1Enable = FALSE; - } else if (StdHeader->Func == AMD_INIT_ENV) { - FCH_DATA_BLOCK *FchParams = (FCH_DATA_BLOCK *)FchData; - printk(BIOS_DEBUG, "Fch OEM config in INIT ENV "); - - /* Azalia Controller OEM Codec Table Pointer */ - FchParams->Azalia.AzaliaOemCodecTablePtr = (CODEC_TBL_LIST *)(&CodecTableList[0]); - /* Azalia Controller Front Panel OEM Table Pointer */ - - /* Fan Control */ - oem_fan_control(FchParams); - - /* XHCI configuration */ - FchParams->Usb.Xhci0Enable = CONFIG(HUDSON_XHCI_ENABLE); - FchParams->Usb.Xhci1Enable = FALSE; - - /* sata configuration */ - FchParams->Sata.SataClass = CONFIG_HUDSON_SATA_MODE; - switch ((SATA_CLASS)CONFIG_HUDSON_SATA_MODE) { - case SataRaid: - case SataAhci: - case SataAhci7804: - case SataLegacyIde: - FchParams->Sata.SataIdeMode = FALSE; - break; - case SataIde2Ahci: - case SataIde2Ahci7804: - default: /* SataNativeIde */ - FchParams->Sata.SataIdeMode = TRUE; - break; - } - } - printk(BIOS_DEBUG, "Done\n"); - - return AGESA_SUCCESS; -} - -static AGESA_STATUS board_ReadSpd_from_cbfs(UINT32 Func, UINTN Data, VOID *ConfigPtr) -{ - AGESA_READ_SPD_PARAMS *info = ConfigPtr; - u8 index; - - if (!ENV_ROMSTAGE) - return AGESA_UNSUPPORTED; - - if (CONFIG(BAP_E21_DDR3_1066)) - index = 1; - else if (CONFIG(BAP_E21_DDR3_1333)) - index = 2; - else /* CONFIG_BAP_E21_DDR3_800 */ - index = 0; - - if (info->MemChannelId > 0) - return AGESA_UNSUPPORTED; - if (info->SocketId != 0) - return AGESA_UNSUPPORTED; - if (info->DimmId != 0) - return AGESA_UNSUPPORTED; - - /* Read index 0, first SPD_SIZE bytes of spd.bin file. */ - if (read_ddr3_spd_from_cbfs((u8 *)info->Buffer, index) < 0) - die("No SPD data\n"); - - return AGESA_SUCCESS; -} diff --git a/src/mainboard/bap/ode_e21XX/Kconfig b/src/mainboard/bap/ode_e21XX/Kconfig deleted file mode 100644 index 4d77280060..0000000000 --- a/src/mainboard/bap/ode_e21XX/Kconfig +++ /dev/null @@ -1,71 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only - -config BOARD_ODE_E21XX - def_bool n - -if BOARD_ODE_E21XX - -config BOARD_SPECIFIC_OPTIONS - def_bool y - select CPU_AMD_PI_00730F01 - select NORTHBRIDGE_AMD_PI_00730F01 - select SOUTHBRIDGE_AMD_PI_AVALON - select DEFAULT_POST_ON_LPC - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select HAVE_ACPI_TABLES - select BOARD_ROMSIZE_KB_8192 - select GFXUMA - select SUPERIO_FINTEK_F81866D - -config MAINBOARD_DIR - string - default "bap/ode_e21XX" - -config MAINBOARD_PART_NUMBER - string - default "ODE_E21XX" - -config MAX_CPUS - int - default 4 - -config IRQ_SLOT_COUNT - int - default 11 - -config ONBOARD_VGA_IS_PRIMARY - bool - default y - -config HUDSON_LEGACY_FREE - bool - default y - -choice - prompt "Select DDR3 clock" - default BAP_E21_DDR3_1333 - help - Select your preferenced DDR3 clock setting. - - Note: This option changes the total power consumption. - - If unsure, use DDR3-1333. - -config BAP_E21_DDR3_800 - bool "Select DDR3-800" - -config BAP_E21_DDR3_1066 - bool "Select DDR3-1066" - -config BAP_E21_DDR3_1333 - bool "Select DDR3-1333" - -endchoice - -config DIMM_SPD_SIZE - int - default 128 - -endif # BOARD_ODE_E21XX diff --git a/src/mainboard/bap/ode_e21XX/Kconfig.name b/src/mainboard/bap/ode_e21XX/Kconfig.name deleted file mode 100644 index 64665daea7..0000000000 --- a/src/mainboard/bap/ode_e21XX/Kconfig.name +++ /dev/null @@ -1,3 +0,0 @@ -# Disabled -#config BOARD_ODE_E21XX -# bool "ODE_e21xx" diff --git a/src/mainboard/bap/ode_e21XX/Makefile.inc b/src/mainboard/bap/ode_e21XX/Makefile.inc deleted file mode 100644 index 2abdc71607..0000000000 --- a/src/mainboard/bap/ode_e21XX/Makefile.inc +++ /dev/null @@ -1,27 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only - -romstage-y += BiosCallOuts.c -romstage-y += OemCustomize.c - -ramstage-y += BiosCallOuts.c -ramstage-y += OemCustomize.c - -## DIMM SPD for on-board memory -SPD_BIN = $(obj)/spd.bin - -# Order of names in SPD_SOURCES is important! -SPD_SOURCES = BAP_Q7_800 BAP_Q7_1066 BAP_Q7_1333 - -SPD_DEPS := $(foreach f, $(SPD_SOURCES), src/mainboard/$(MAINBOARDDIR)/$(f).spd.hex) - -# Include spd ROM data -$(SPD_BIN): $(SPD_DEPS) - for f in $+; \ - do for c in $$(cat $$f | grep -v ^#); \ - do printf $$(printf '\%o' 0x$$c); \ - done; \ - done > $@ - -cbfs-files-y += spd.bin -spd.bin-file := $(SPD_BIN) -spd.bin-type := spd diff --git a/src/mainboard/bap/ode_e21XX/OemCustomize.c b/src/mainboard/bap/ode_e21XX/OemCustomize.c deleted file mode 100644 index cc3818925c..0000000000 --- a/src/mainboard/bap/ode_e21XX/OemCustomize.c +++ /dev/null @@ -1,92 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -#include <AGESA.h> - - -static const PCIe_PORT_DESCRIPTOR PortList[] = { - /* Initialize Port descriptor (PCIe port, Lanes 2-3, PCI Device 2, Function 4) */ - { - 0, - PCIE_ENGINE_DATA_INITIALIZER(PciePortEngine, 2, 3), - PCIE_PORT_DATA_INITIALIZER_V2(PortEnabled, ChannelTypeExt6db, 2, 4, - HotplugDisabled, - PcieGenMaxSupported, - PcieGenMaxSupported, - AspmDisabled, 0x02, 0) - }, - /* Initialize Port descriptor (PCIe port, Lane 1, PCI Device 2, Function 3) */ - { - 0, - PCIE_ENGINE_DATA_INITIALIZER(PciePortEngine, 1, 1), - PCIE_PORT_DATA_INITIALIZER_V2(PortEnabled, ChannelTypeExt6db, 2, 3, - HotplugDisabled, - PcieGenMaxSupported, - PcieGenMaxSupported, - AspmDisabled, 0x03, 0) - }, - /* Initialize Port descriptor (PCIe port, Lane 0, PCI Device 2, Function 2) */ - { - 0, - PCIE_ENGINE_DATA_INITIALIZER(PciePortEngine, 0, 0), - PCIE_PORT_DATA_INITIALIZER_V2(PortEnabled, ChannelTypeExt6db, 2, 2, - HotplugDisabled, - PcieGenMaxSupported, - PcieGenMaxSupported, - AspmDisabled, 0x04, 0) - }, - /* Initialize Port descriptor (PCIe port, Lanes 4-7, PCI Device 2, Function 1) */ - { - DESCRIPTOR_TERMINATE_LIST, - PCIE_ENGINE_DATA_INITIALIZER(PciePortEngine, 4, 7), - PCIE_PORT_DATA_INITIALIZER_V2(PortEnabled, ChannelTypeExt6db, 2, 1, - HotplugDisabled, - PcieGenMaxSupported, - PcieGenMaxSupported, - AspmDisabled, 0x05, 0) - } -}; - -static const PCIe_DDI_DESCRIPTOR DdiList[] = { - /* eDP0 to LVDS connector */ - { - 0, - PCIE_ENGINE_DATA_INITIALIZER(PcieDdiEngine, 8, 11), - PCIE_DDI_DATA_INITIALIZER(ConnectorTypeDP, Aux1, Hdp1) - }, - /* DP1 to HDMI */ - { - DESCRIPTOR_TERMINATE_LIST, - PCIE_ENGINE_DATA_INITIALIZER(PcieDdiEngine, 12, 15), - PCIE_DDI_DATA_INITIALIZER(ConnectorTypeHDMI, Aux2, Hdp2) - }, -}; - -static const PCIe_COMPLEX_DESCRIPTOR PcieComplex = { - .Flags = DESCRIPTOR_TERMINATE_LIST, - .SocketId = 0, - .PciePortList = PortList, - .DdiLinkList = DdiList -}; - -/*---------------------------------------------------------------------------------------*/ -/** - * OemCustomizeInitEarly - * - * Description: - * This stub function will call the host environment through the binary block - * interface (call-out port) to provide a user hook opportunity - * - * Parameters: - * @param[in] *InitEarly - * - * @retval VOID - * - **/ -/*---------------------------------------------------------------------------------------*/ -VOID -OemCustomizeInitEarly ( - IN OUT AMD_EARLY_PARAMS *InitEarly - ) -{ - InitEarly->GnbConfig.PcieComplexList = &PcieComplex; -} diff --git a/src/mainboard/bap/ode_e21XX/acpi/gpe.asl b/src/mainboard/bap/ode_e21XX/acpi/gpe.asl deleted file mode 100644 index cdf1f058e9..0000000000 --- a/src/mainboard/bap/ode_e21XX/acpi/gpe.asl +++ /dev/null @@ -1,57 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -Scope(\_GPE) { /* Start Scope GPE */ - - /* General event 3 */ - Method(_L03) { - /* DBGO("\\_GPE\\_L00\n") */ - } - - /* Legacy PM event */ - Method(_L08) { - /* DBGO("\\_GPE\\_L08\n") */ - } - - /* Temp warning (TWarn) event */ - Method(_L09) { - /* DBGO("\\_GPE\\_L09\n") */ - /* Notify (\_TZ.TZ00, 0x80) */ - } - - /* USB controller PME# */ - Method(_L0B) { - /* DBGO("\\_GPE\\_L0B\n") */ - Notify(\_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.UOH6, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.XHC0, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* ExtEvent0 SCI event */ - Method(_L10) { - /* DBGO("\\_GPE\\_L10\n") */ - } - - /* ExtEvent1 SCI event */ - Method(_L11) { - /* DBGO("\\_GPE\\_L11\n") */ - } - - /* GPIO0 or GEvent8 event */ - Method(_L18) { - /* DBGO("\\_GPE\\_L18\n") */ - Notify(\_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* Azalia SCI event */ - Method(_L1B) { - /* DBGO("\\_GPE\\_L1B\n") */ - Notify(\_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */ - } -} /* End Scope GPE */ diff --git a/src/mainboard/bap/ode_e21XX/acpi/ide.asl b/src/mainboard/bap/ode_e21XX/acpi/ide.asl deleted file mode 100644 index 4a3eac89a3..0000000000 --- a/src/mainboard/bap/ode_e21XX/acpi/ide.asl +++ /dev/null @@ -1,2 +0,0 @@ -/* No license required */ -/* No IDE functionality */ diff --git a/src/mainboard/bap/ode_e21XX/acpi/mainboard.asl b/src/mainboard/bap/ode_e21XX/acpi/mainboard.asl deleted file mode 100644 index 63c7356120..0000000000 --- a/src/mainboard/bap/ode_e21XX/acpi/mainboard.asl +++ /dev/null @@ -1,22 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -/* Memory related values */ -Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */ -Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */ -Name(PBLN, 0x0) /* Length of BIOS area */ - -Name(PCBA, CONFIG_MMCONF_BASE_ADDRESS) /* Base address of PCIe config space */ -Name(PCLN, Multiply(0x100000, CONFIG_MMCONF_BUS_NUMBER)) /* Length of PCIe config space, 1MB each bus */ -Name(HPBA, 0xFED00000) /* Base address of HPET table */ - -/* Some global data */ -Name(OSVR, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */ -Name(OSV, Ones) /* Assume nothing */ -Name(PMOD, One) /* Assume APIC */ - -/* AcpiGpe0Blk */ -OperationRegion(GP0B, SystemMemory, 0xfed80814, 0x04) - Field(GP0B, ByteAcc, NoLock, Preserve) { - , 11, - USBS, 1, -} diff --git a/src/mainboard/bap/ode_e21XX/acpi/routing.asl b/src/mainboard/bap/ode_e21XX/acpi/routing.asl deleted file mode 100644 index d08e162e4d..0000000000 --- a/src/mainboard/bap/ode_e21XX/acpi/routing.asl +++ /dev/null @@ -1,180 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -/* -#include <acpi/acpi.h> -DefinitionBlock ("DSDT.AML", "DSDT", 0x01, OEM_ID, ACPI_TABLE_CREATOR, 0x00010001 - ) - { - #include "routing.asl" - } -*/ - -/* Routing is in System Bus scope */ -Name(PR0, Package(){ - /* NB devices */ - /* Bus 0, Dev 0 - F16 Host Controller */ - - /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics(IGP) */ - /* Bus 0, Dev 1, Func 1 - HDMI Audio Controller */ - Package(){0x0001FFFF, 0, INTB, 0 }, - Package(){0x0001FFFF, 1, INTC, 0 }, - - - /* Bus 0, Dev 2 Func 0,1,2,3,4,5 - PCIe Bridges */ - Package(){0x0002FFFF, 0, INTC, 0 }, - Package(){0x0002FFFF, 1, INTD, 0 }, - Package(){0x0002FFFF, 2, INTA, 0 }, - Package(){0x0002FFFF, 3, INTB, 0 }, - - /* FCH devices */ - /* Bus 0, Dev 20 - F0:SMBus/ACPI,F2:HDAudio;F3:LPC;F7:SD */ - Package(){0x0014FFFF, 0, INTA, 0 }, - Package(){0x0014FFFF, 1, INTB, 0 }, - Package(){0x0014FFFF, 2, INTC, 0 }, - Package(){0x0014FFFF, 3, INTD, 0 }, - - /* Bus 0, Dev 18, 19, 22 Func 0 - USB: OHCI */ - /* Bus 0, Dev 18, 19, 22 Func 1 - USB: EHCI */ - Package(){0x0012FFFF, 0, INTC, 0 }, - Package(){0x0012FFFF, 1, INTB, 0 }, - - Package(){0x0013FFFF, 0, INTC, 0 }, - Package(){0x0013FFFF, 1, INTB, 0 }, - - Package(){0x0016FFFF, 0, INTC, 0 }, - Package(){0x0016FFFF, 1, INTB, 0 }, - - /* Bus 0, Dev 10 - USB: XHCI func 0, 1 */ - Package(){0x0010FFFF, 0, INTC, 0 }, - Package(){0x0010FFFF, 1, INTB, 0 }, - - /* Bus 0, Dev 17 - SATA controller */ - Package(){0x0011FFFF, 0, INTD, 0 }, - -}) - -Name(APR0, Package(){ - /* NB devices in APIC mode */ - /* Bus 0, Dev 0 - F15 Host Controller */ - - /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics(IGP) */ - Package(){0x0001FFFF, 0, 0, 44 }, - Package(){0x0001FFFF, 1, 0, 45 }, - - /* Bus 0, Dev 2 - PCIe Bridges */ - Package(){0x0002FFFF, 0, 0, 24 }, - Package(){0x0002FFFF, 1, 0, 25 }, - Package(){0x0002FFFF, 2, 0, 26 }, - Package(){0x0002FFFF, 3, 0, 27 }, - - - /* SB devices in APIC mode */ - /* Bus 0, Dev 20 - F0:SMBus/ACPI,F2:HDAudio;F3:LPC;F7:SD */ - Package(){0x0014FFFF, 0, 0, 16 }, - Package(){0x0014FFFF, 1, 0, 17 }, - Package(){0x0014FFFF, 2, 0, 18 }, - Package(){0x0014FFFF, 3, 0, 19 }, - - /* Bus 0, Dev 18, 19, 22 Func 0 - USB: OHCI */ - /* Bus 0, Dev 18, 19, 22 Func 1 - USB: EHCI */ - Package(){0x0012FFFF, 0, 0, 18 }, - Package(){0x0012FFFF, 1, 0, 17 }, - - Package(){0x0013FFFF, 0, 0, 18 }, - Package(){0x0013FFFF, 1, 0, 17 }, - - Package(){0x0016FFFF, 0, 0, 18 }, - Package(){0x0016FFFF, 1, 0, 17 }, - - /* Bus 0, Dev 10 - USB: XHCI func 0, 1 */ - Package(){0x0010FFFF, 0, 0, 0x12}, - Package(){0x0010FFFF, 1, 0, 0x11}, - - /* Bus 0, Dev 17 - SATA controller */ - Package(){0x0011FFFF, 0, 0, 19 }, - -}) - -Name(PS2, Package(){ - Package(){0x0000FFFF, 0, INTC, 0 }, - Package(){0x0000FFFF, 1, INTD, 0 }, - Package(){0x0000FFFF, 2, INTA, 0 }, - Package(){0x0000FFFF, 3, INTB, 0 }, -}) -Name(APS2, Package(){ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, -}) - -/* GFX */ -Name(PS4, Package(){ - Package(){0x0000FFFF, 0, INTA, 0 }, - Package(){0x0000FFFF, 1, INTB, 0 }, - Package(){0x0000FFFF, 2, INTC, 0 }, - Package(){0x0000FFFF, 3, INTD, 0 }, -}) -Name(APS4, Package(){ - /* PCIe slot - Hooked to PCIe slot 4 */ - Package(){0x0000FFFF, 0, 0, 24 }, - Package(){0x0000FFFF, 1, 0, 25 }, - Package(){0x0000FFFF, 2, 0, 26 }, - Package(){0x0000FFFF, 3, 0, 27 }, -}) - -/* GPP 0 */ -Name(PS5, Package(){ - Package(){0x0000FFFF, 0, INTB, 0 }, - Package(){0x0000FFFF, 1, INTC, 0 }, - Package(){0x0000FFFF, 2, INTD, 0 }, - Package(){0x0000FFFF, 3, INTA, 0 }, -}) -Name(APS5, Package(){ - Package(){0x0000FFFF, 0, 0, 28 }, - Package(){0x0000FFFF, 1, 0, 29 }, - Package(){0x0000FFFF, 2, 0, 30 }, - Package(){0x0000FFFF, 3, 0, 31 }, -}) - -/* GPP 1 */ -Name(PS6, Package(){ - Package(){0x0000FFFF, 0, INTC, 0 }, - Package(){0x0000FFFF, 1, INTD, 0 }, - Package(){0x0000FFFF, 2, INTA, 0 }, - Package(){0x0000FFFF, 3, INTB, 0 }, -}) -Name(APS6, Package(){ - Package(){0x0000FFFF, 0, 0, 32 }, - Package(){0x0000FFFF, 1, 0, 33 }, - Package(){0x0000FFFF, 2, 0, 34 }, - Package(){0x0000FFFF, 3, 0, 35 }, -}) - -/* GPP 2 */ -Name(PS7, Package(){ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, -}) -Name(APS7, Package(){ - Package(){0x0000FFFF, 0, 0, 36 }, - Package(){0x0000FFFF, 1, 0, 37 }, - Package(){0x0000FFFF, 2, 0, 38 }, - Package(){0x0000FFFF, 3, 0, 39 }, -}) - -/* GPP 3 */ -Name(PS8, Package(){ - Package(){0x0000FFFF, 0, INTA, 0 }, - Package(){0x0000FFFF, 1, INTB, 0 }, - Package(){0x0000FFFF, 2, INTC, 0 }, - Package(){0x0000FFFF, 3, INTD, 0 }, -}) -Name(APS8, Package(){ - Package(){0x0000FFFF, 0, 0, 40 }, - Package(){0x0000FFFF, 1, 0, 41 }, - Package(){0x0000FFFF, 2, 0, 42 }, - Package(){0x0000FFFF, 3, 0, 43 }, -}) diff --git a/src/mainboard/bap/ode_e21XX/acpi/si.asl b/src/mainboard/bap/ode_e21XX/acpi/si.asl deleted file mode 100644 index 25c1dca190..0000000000 --- a/src/mainboard/bap/ode_e21XX/acpi/si.asl +++ /dev/null @@ -1,10 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -Scope(\_SI) { - Method(_SST, 1) { - /* DBGO("\\_SI\\_SST\n") */ - /* DBGO(" New Indicator state: ") */ - /* DBGO(Arg0) */ - /* DBGO("\n") */ - } -} /* End Scope SI */ diff --git a/src/mainboard/bap/ode_e21XX/acpi/sleep.asl b/src/mainboard/bap/ode_e21XX/acpi/sleep.asl deleted file mode 100644 index dbe9bd1a69..0000000000 --- a/src/mainboard/bap/ode_e21XX/acpi/sleep.asl +++ /dev/null @@ -1,82 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -/* Wake status package */ -Name(WKST,Package(){Zero, Zero}) - -/* -* \_PTS - Prepare to Sleep method -* -* Entry: -* Arg0=The value of the sleeping state S1=1, S2=2, etc -* -* Exit: -* -none- -* -* The _PTS control method is executed at the beginning of the sleep process -* for S1-S5. The sleeping value is passed to the _PTS control method. This -* control method may be executed a relatively long time before entering the -* sleep state and the OS may abort the operation without notification to -* the ACPI driver. This method cannot modify the configuration or power -* state of any device in the system. -*/ - -External(\_SB.APTS, MethodObj) -External(\_SB.AWAK, MethodObj) - -Method(_PTS, 1) { - /* DBGO("\\_PTS\n") */ - /* DBGO("From S0 to S") */ - /* DBGO(Arg0) */ - /* DBGO("\n") */ - - /* Clear wake status structure. */ - Store(0, Index(WKST,0)) - Store(0, Index(WKST,1)) - Store(7, UPWS) - \_SB.APTS(Arg0) -} /* End Method(\_PTS) */ - -/* -* \_BFS OEM Back From Sleep method -* -* Entry: -* Arg0=The value of the sleeping state S1=1, S2=2 -* -* Exit: -* -none- -*/ -Method(\_BFS, 1) { - /* DBGO("\\_BFS\n") */ - /* DBGO("From S") */ - /* DBGO(Arg0) */ - /* DBGO(" to S0\n") */ -} - -/* -* \_WAK System Wake method -* -* Entry: -* Arg0=The value of the sleeping state S1=1, S2=2 -* -* Exit: -* Return package of 2 DWords -* Dword 1 - Status -* 0x00000000 wake succeeded -* 0x00000001 Wake was signaled but failed due to lack of power -* 0x00000002 Wake was signaled but failed due to thermal condition -* Dword 2 - Power Supply state -* if non-zero the effective S-state the power supply entered -*/ -Method(\_WAK, 1) { - /* DBGO("\\_WAK\n") */ - /* DBGO("From S") */ - /* DBGO(Arg0) */ - /* DBGO(" to S0\n") */ - - /* clear USB wake up signal */ - Store(1, USBS) - - \_SB.AWAK(Arg0) - - Return(WKST) -} /* End Method(\_WAK) */ diff --git a/src/mainboard/bap/ode_e21XX/acpi/superio.asl b/src/mainboard/bap/ode_e21XX/acpi/superio.asl deleted file mode 100644 index e12fd7b217..0000000000 --- a/src/mainboard/bap/ode_e21XX/acpi/superio.asl +++ /dev/null @@ -1,33 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -/* SuperIO support for Windows */ - -Device (UAR1) { - Name (_HID, EISAID ("PNP0501")) - Name (_UID, 1) - Name (_CRS, ResourceTemplate () - { - IO (Decode16, 0x03F8, 0x03F8, 0x08, 0x08) - IRQNoFlags () {4} - }) - Name (_PRS, ResourceTemplate () - { - IO (Decode16, 0x03F8, 0x03F8, 0x08, 0x08) - IRQNoFlags () {4} - }) -} - -Device (UAR2) { - Name (_HID, EISAID ("PNP0501")) - Name (_UID, 2) - Name (_CRS, ResourceTemplate () - { - IO (Decode16, 0x02F8, 0x02F8, 0x08, 0x08) - IRQNoFlags () {3} - }) - Name (_PRS, ResourceTemplate () - { - IO (Decode16, 0x02F8, 0x02F8, 0x08, 0x08) - IRQNoFlags () {3} - }) -} diff --git a/src/mainboard/bap/ode_e21XX/acpi/thermal.asl b/src/mainboard/bap/ode_e21XX/acpi/thermal.asl deleted file mode 100644 index 73077ac4d3..0000000000 --- a/src/mainboard/bap/ode_e21XX/acpi/thermal.asl +++ /dev/null @@ -1,2 +0,0 @@ -/* No license required */ -/* No thermal zone functionality */ diff --git a/src/mainboard/bap/ode_e21XX/acpi/usb_oc.asl b/src/mainboard/bap/ode_e21XX/acpi/usb_oc.asl deleted file mode 100644 index 52b2daa407..0000000000 --- a/src/mainboard/bap/ode_e21XX/acpi/usb_oc.asl +++ /dev/null @@ -1,23 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -/* simple name description */ -/* -#include <acpi/acpi.h> -DefinitionBlock ("DSDT.AML", "DSDT", 0x01, OEM_ID, ACPI_TABLE_CREATOR, 0x00010001 - ) - { - #include "usb.asl" - } -*/ - -/* USB overcurrent mapping pins. */ -Name(UOM0, 0) -Name(UOM1, 2) -Name(UOM2, 0) -Name(UOM3, 7) -Name(UOM4, 2) -Name(UOM5, 2) -Name(UOM6, 6) -Name(UOM7, 2) -Name(UOM8, 6) -Name(UOM9, 6) diff --git a/src/mainboard/bap/ode_e21XX/acpi_tables.c b/src/mainboard/bap/ode_e21XX/acpi_tables.c deleted file mode 100644 index 2cc9bf58e1..0000000000 --- a/src/mainboard/bap/ode_e21XX/acpi_tables.c +++ /dev/null @@ -1,33 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -#include <acpi/acpi.h> -#include <arch/ioapic.h> - -unsigned long acpi_fill_madt(unsigned long current) -{ - /* create all subtables for processors */ - current = acpi_create_madt_lapics(current); - - /* Write SB800 IOAPIC, only one */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, CONFIG_MAX_CPUS, - IO_APIC_ADDR, 0); - - /* TODO: Remove the hardcode */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, CONFIG_MAX_CPUS+1, - 0xFEC20000, 24); - - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, 0); - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, 0xF); - /* 0: mean bus 0--->ISA */ - /* 0: PIC 0 */ - /* 2: APIC 2 */ - /* 5 mean: 0101 --> Edge-triggered, Active high */ - - /* create all subtables for processors */ - current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *)current, 0xff, 5, 1); - /* 1: LINT1 connect to NMI */ - - return current; -} diff --git a/src/mainboard/bap/ode_e21XX/board_info.txt b/src/mainboard/bap/ode_e21XX/board_info.txt deleted file mode 100644 index dffb350694..0000000000 --- a/src/mainboard/bap/ode_e21XX/board_info.txt +++ /dev/null @@ -1,6 +0,0 @@ -Board name: ODE_e21xx -Board URL: http://www.unibap.com/advanced-heterogeneous-computing-modules/ -Category: eval -ROM protocol: SPI -ROM socketed: n -Flashrom support: y diff --git a/src/mainboard/bap/ode_e21XX/cmos.layout b/src/mainboard/bap/ode_e21XX/cmos.layout deleted file mode 100644 index ade4c04bf3..0000000000 --- a/src/mainboard/bap/ode_e21XX/cmos.layout +++ /dev/null @@ -1,55 +0,0 @@ -#***************************************************************************** -# SPDX-License-Identifier: GPL-2.0-only - -#***************************************************************************** - -entries - -0 384 r 0 reserved_memory -384 1 e 4 boot_option -388 4 h 0 reboot_counter -#392 3 r 0 unused -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -456 1 e 1 ECC_memory -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -6 5 Notice -6 6 Info -6 7 Debug -6 8 Spew -8 0 400Mhz -8 1 333Mhz -8 2 266Mhz -8 3 200Mhz -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/bap/ode_e21XX/devicetree.cb b/src/mainboard/bap/ode_e21XX/devicetree.cb deleted file mode 100644 index 56acc20a82..0000000000 --- a/src/mainboard/bap/ode_e21XX/devicetree.cb +++ /dev/null @@ -1,102 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only - -chip northbridge/amd/pi/00730F01/root_complex - device cpu_cluster 0 on - chip cpu/amd/pi/00730F01 - device lapic 0 on end - end - end - - device domain 0 on - subsystemid 0x1022 0x1410 inherit - - chip northbridge/amd/pi/00730F01 - device pci 0.0 on end # Root Complex - device pci 0.2 off end # IOMMU - device pci 1.0 on end # Internal Graphics P2P bridge 0x9804 - device pci 1.1 on end # Internal Multimedia - device pci 2.0 on end # PCIe Host Bridge - device pci 2.1 on end # x4 PCIe slot - device pci 2.2 on end # PCIe Q7 Realtek GBit LAN - device pci 2.3 on end # PCIe CB Realtek GBit LAN - device pci 2.4 on end # PCIe x2 BAP FPGA - device pci 8.0 on end # Platform Security Processor - end #chip northbridge/amd/pi/00730F01 - - chip southbridge/amd/pi/hudson - device pci 10.0 on end # XHCI HC0 - device pci 11.0 on end # SATA - device pci 12.0 on end # EHCI #0 - device pci 13.0 on end # EHCI #1 - device pci 14.0 on end # SMBus - device pci 14.2 on end # HDA 0x4383 - device pci 14.3 on # LPC 0x439d - chip superio/fintek/f81866d - register "hwm_amd_tsi_addr" = "0x98" # Set to AMD - register "hwm_amd_tsi_control" = "0x02" # Set to AMD - register "hwm_fan_select" = "0xC0" # Sets Fan2 to PWM - register "hwm_fan_mode" = "0xD5" # Sets FAN1-3 to Auto RPM mode - register "hwm_fan3_control" = "0x00" # Fan control 23kHz - register "hwm_fan2_temp_map_select" = "0x1E" # Fan control 23kHz - register "hwm_fan2_bound1" = "0x3C" # 60°C - register "hwm_fan2_bound2" = "0x32" # 50°C - register "hwm_fan2_bound3" = "0x28" # 40°C - register "hwm_fan2_bound4" = "0x1E" # 30°C - register "hwm_fan2_seg1_speed" = "0xFF" # 100% - register "hwm_fan2_seg2_speed" = "0xD9" # 85% - register "hwm_fan2_seg3_speed" = "0xB2" # 70% - register "hwm_fan2_seg4_speed" = "0x99" # 60% - register "hwm_fan2_seg5_speed" = "0x80" # 50% - register "hwm_temp_sens_type" = "0x04" # Sets temp sensor 1 type to to thermistor - device pnp 4e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 4e.3 off end # Parallel Port - device pnp 4e.4 on # Hardware Monitor - io 0x60 = 0x295 - irq 0x70 = 0 - end - device pnp 4e.5 off # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - end - device pnp 4e.6 off end # GPIO - device pnp 4e.7 on end # WDT - device pnp 4e.a off end # PME - device pnp 4e.10 on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 4e.11 on # COM2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 4e.12 off # COM3 - io 0x60 = 0x3e8 - irq 0x70 = 4 - end - device pnp 4e.13 off # COM4 - io 0x60 = 0x2e8 - irq 0x70 = 3 - end - device pnp 4e.14 off # COM5 - end - device pnp 4e.15 off # COM6 - end - end # f81866d - end #LPC - device pci 14.7 on end # SD - end #chip southbridge/amd/pi/hudson - - device pci 18.0 on end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - device pci 18.4 on end - device pci 18.5 on end - - end #domain -end #northbridge/amd/pi/00730F01/root_complex diff --git a/src/mainboard/bap/ode_e21XX/dsdt.asl b/src/mainboard/bap/ode_e21XX/dsdt.asl deleted file mode 100644 index 5567cf3b34..0000000000 --- a/src/mainboard/bap/ode_e21XX/dsdt.asl +++ /dev/null @@ -1,69 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -/* DefinitionBlock Statement */ -#include <acpi/acpi.h> -DefinitionBlock ( - "DSDT.AML", /* Output filename */ - "DSDT", /* Signature */ - 0x02, /* DSDT Revision, needs to be 2 for 64bit */ - OEM_ID, - ACPI_TABLE_CREATOR, - 0x00010001 /* OEM Revision */ - ) -{ /* Start of ASL file */ - /* #include <arch/x86/acpi/debug.asl> */ /* Include global debug methods if needed */ - - /* Globals for the platform */ - #include "acpi/mainboard.asl" - - /* Describe the USB Overcurrent pins */ - #include "acpi/usb_oc.asl" - - /* PCI IRQ mapping for the Southbridge */ - #include <southbridge/amd/pi/hudson/acpi/pcie.asl> - - /* Describe the processor tree (\_SB) */ - #include <cpu/amd/pi/00730F01/acpi/cpu.asl> - - /* Contains the supported sleep states for this chipset */ - #include <southbridge/amd/common/acpi/sleepstates.asl> - - /* Contains the Sleep methods (WAK, PTS, GTS, etc.) */ - #include "acpi/sleep.asl" - - /* System Bus */ - Scope(\_SB) { /* Start \_SB scope */ - /* global utility methods expected within the \_SB scope */ - #include <arch/x86/acpi/globutil.asl> - - /* Describe IRQ Routing mapping for this platform (within the \_SB scope) */ - #include "acpi/routing.asl" - - Device(PCI0) { - /* Describe the AMD Northbridge */ - #include <northbridge/amd/pi/00730F01/acpi/northbridge.asl> - - /* Describe the AMD Fusion Controller Hub Southbridge */ - #include <southbridge/amd/pi/hudson/acpi/fch.asl> - } - - /* Describe PCI INT[A-H] for the Southbridge */ - #include <southbridge/amd/pi/hudson/acpi/pci_int.asl> - /* Add UART support for Windows */ - #include "acpi/superio.asl" - - } /* End \_SB scope */ - - /* Describe SMBUS for the Southbridge */ - #include <southbridge/amd/pi/hudson/acpi/smbus.asl> - - /* Define the General Purpose Events for the platform */ - #include "acpi/gpe.asl" - - /* Define the Thermal zones and methods for the platform */ - #include "acpi/thermal.asl" - - /* Define the System Indicators for the platform */ - #include "acpi/si.asl" -} -/* End of ASL file */ diff --git a/src/mainboard/bap/ode_e21XX/irq_tables.c b/src/mainboard/bap/ode_e21XX/irq_tables.c deleted file mode 100644 index ef31ff1e20..0000000000 --- a/src/mainboard/bap/ode_e21XX/irq_tables.c +++ /dev/null @@ -1,88 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -#include <console/console.h> -#include <string.h> -#include <stdint.h> -#include <arch/pirq_routing.h> - -static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, - u8 link0, u16 bitmap0, u8 link1, u16 bitmap1, - u8 link2, u16 bitmap2, u8 link3, u16 bitmap3, - u8 slot, u8 rfu) -{ - pirq_info->bus = bus; - pirq_info->devfn = devfn; - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - pirq_info->slot = slot; - pirq_info->rfu = rfu; -} - - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - struct irq_routing_table *pirq; - struct irq_info *pirq_info; - u32 slot_num; - u8 *v; - - u8 sum = 0; - int i; - - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; - - /* This table must be between 0xf0000 & 0x100000 */ - printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); - - pirq = (void *)(addr); - v = (u8 *) (addr); - - pirq->signature = PIRQ_SIGNATURE; - pirq->version = PIRQ_VERSION; - - pirq->rtr_bus = 0; - pirq->rtr_devfn = PCI_DEVFN(0x14, 4); - - pirq->exclusive_irqs = 0; - - pirq->rtr_vendor = 0x1002; - pirq->rtr_device = 0x4384; - - pirq->miniport_data = 0; - - memset(pirq->rfu, 0, sizeof(pirq->rfu)); - - pirq_info = (void *)(&pirq->checksum + 1); - slot_num = 0; - - /* pci bridge */ - write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), - 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, - 0); - pirq_info++; - - slot_num++; - - pirq->size = 32 + 16 * slot_num; - - for (i = 0; i < pirq->size; i++) - sum += v[i]; - - sum = pirq->checksum - sum; - - if (sum != pirq->checksum) { - pirq->checksum = sum; - } - - printk(BIOS_INFO, "%s done.\n", __func__); - - return (unsigned long)pirq_info; -} diff --git a/src/mainboard/bap/ode_e21XX/mainboard.c b/src/mainboard/bap/ode_e21XX/mainboard.c deleted file mode 100644 index ce4a63ccc3..0000000000 --- a/src/mainboard/bap/ode_e21XX/mainboard.c +++ /dev/null @@ -1,19 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -#include <console/console.h> -#include <device/device.h> -#include <device/pci_def.h> -#include <cpu/x86/msr.h> -#include <cpu/amd/mtrr.h> - -/********************************************** - * enable the dedicated function in mainboard. - **********************************************/ -static void mainboard_enable(struct device *dev) -{ - printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable.\n"); -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/bap/ode_e21XX/mptable.c b/src/mainboard/bap/ode_e21XX/mptable.c deleted file mode 100644 index c5aeeb0b4e..0000000000 --- a/src/mainboard/bap/ode_e21XX/mptable.c +++ /dev/null @@ -1,172 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -#include <arch/smp/mpspec.h> -#include <arch/io.h> -#include <arch/ioapic.h> -#include <string.h> -#include <stdint.h> -#include <southbridge/amd/pi/hudson/hudson.h> - -u8 picr_data[0x54] = { - 0x03,0x04,0x05,0x07,0x0B,0x0A,0x1F,0x1F,0xFA,0xF1,0x00,0x00,0x1F,0x1F,0x1F,0x1F, - 0x1F,0x1F,0x1F,0x03,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x05,0x04,0x05,0x04,0x04,0x05,0x04,0x05,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x04,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x03,0x04,0x05,0x07 -}; -u8 intr_data[0x54] = { - 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17,0x00,0x00,0x00,0x00,0x1F,0x1F,0x1F,0x1F, - 0x09,0x1F,0x1F,0x10,0x1F,0x10,0x1F,0x10,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x05,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x12,0x11,0x12,0x11,0x12,0x11,0x12,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x11,0x13,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x10,0x11,0x12,0x13 -}; - -static void smp_add_mpc_entry(struct mp_config_table *mc, unsigned int length) -{ - mc->mpc_length += length; - mc->mpc_entry_count++; -} - -static void my_smp_write_bus(struct mp_config_table *mc, - unsigned char id, const char *bustype) -{ - struct mpc_config_bus *mpc; - mpc = smp_next_mpc_entry(mc); - memset(mpc, '\0', sizeof(*mpc)); - mpc->mpc_type = MP_BUS; - mpc->mpc_busid = id; - memcpy(mpc->mpc_bustype, bustype, sizeof(mpc->mpc_bustype)); - smp_add_mpc_entry(mc, sizeof(*mpc)); -} - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - int bus_isa; - u8 byte; - - /* - * By the time this function gets called, the IOAPIC registers - * have been written so they can be read to get the correct - * APIC ID and Version - */ - u8 ioapic_id = (io_apic_read(VIO_APIC_VADDR, 0x00) >> 24); - u8 ioapic_ver = (io_apic_read(VIO_APIC_VADDR, 0x01) & 0xFF); - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - memcpy(mc->mpc_oem, "AMD ", 8); - - smp_write_processors(mc); - - //mptable_write_buses(mc, NULL, &bus_isa); - my_smp_write_bus(mc, 0, "PCI "); - my_smp_write_bus(mc, 1, "PCI "); - bus_isa = 0x02; - my_smp_write_bus(mc, bus_isa, "ISA "); - - /* I/O APICs: APIC ID Version State Address */ - smp_write_ioapic(mc, ioapic_id, ioapic_ver, VIO_APIC_VADDR); - - smp_write_ioapic(mc, ioapic_id+1, 0x21, (void *)0xFEC20000); - /* PIC IRQ routine */ - for (byte = 0x0; byte < sizeof(picr_data); byte ++) { - outb(byte, 0xC00); - outb(picr_data[byte], 0xC01); - } - - /* APIC IRQ routine */ - for (byte = 0x0; byte < sizeof(intr_data); byte ++) { - outb(byte | 0x80, 0xC00); - outb(intr_data[byte], 0xC01); - } - /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ -#define IO_LOCAL_INT(type, intr, apicid, pin) \ - smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin)); - mptable_add_isa_interrupts(mc, bus_isa, ioapic_id, 0); - - /* PCI interrupts are level triggered, and are - * associated with a specific bus/device/function tuple. - */ -#define PCI_INT(bus, dev, int_sign, pin) \ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(int_sign)), ioapic_id, (pin)) - - /* Internal VGA */ - PCI_INT(0x0, 0x01, 0x0, intr_data[0x02]); - PCI_INT(0x0, 0x01, 0x1, intr_data[0x03]); - - /* SMBUS */ - PCI_INT(0x0, 0x14, 0x0, 0x10); - - /* HD Audio */ - PCI_INT(0x0, 0x14, 0x0, intr_data[0x13]); - - /* USB */ - PCI_INT(0x0, 0x12, 0x0, intr_data[0x30]); - PCI_INT(0x0, 0x12, 0x1, intr_data[0x31]); - PCI_INT(0x0, 0x13, 0x0, intr_data[0x32]); - PCI_INT(0x0, 0x13, 0x1, intr_data[0x33]); - PCI_INT(0x0, 0x16, 0x0, intr_data[0x34]); - PCI_INT(0x0, 0x16, 0x1, intr_data[0x35]); - PCI_INT(0x0, 0x14, 0x2, intr_data[0x36]); - - /* sata */ - PCI_INT(0x0, 0x11, 0x0, intr_data[0x40]); - PCI_INT(0x0, 0x11, 0x0, intr_data[0x41]); - - /* on board NIC & Slot PCIE. */ - - /* PCI slots */ - struct device *dev = pcidev_on_root(0x14, 4); - if (dev && dev->enabled) { - u8 bus_pci = dev->link_list->secondary; - /* PCI_SLOT 0. */ - PCI_INT(bus_pci, 0x5, 0x0, 0x14); - PCI_INT(bus_pci, 0x5, 0x1, 0x15); - PCI_INT(bus_pci, 0x5, 0x2, 0x16); - PCI_INT(bus_pci, 0x5, 0x3, 0x17); - - /* PCI_SLOT 1. */ - PCI_INT(bus_pci, 0x6, 0x0, 0x15); - PCI_INT(bus_pci, 0x6, 0x1, 0x16); - PCI_INT(bus_pci, 0x6, 0x2, 0x17); - PCI_INT(bus_pci, 0x6, 0x3, 0x14); - - /* PCI_SLOT 2. */ - PCI_INT(bus_pci, 0x7, 0x0, 0x16); - PCI_INT(bus_pci, 0x7, 0x1, 0x17); - PCI_INT(bus_pci, 0x7, 0x2, 0x14); - PCI_INT(bus_pci, 0x7, 0x3, 0x15); - } - - /* PCIe Lan*/ - PCI_INT(0x0, 0x06, 0x0, 0x13); - - /* FCH PCIe PortA */ - PCI_INT(0x0, 0x15, 0x0, 0x10); - /* FCH PCIe PortB */ - PCI_INT(0x0, 0x15, 0x1, 0x11); - /* FCH PCIe PortC */ - PCI_INT(0x0, 0x15, 0x2, 0x12); - /* FCH PCIe PortD */ - PCI_INT(0x0, 0x15, 0x3, 0x13); - - /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ - IO_LOCAL_INT(mp_ExtINT, 0, MP_APIC_ALL, 0x0); - IO_LOCAL_INT(mp_NMI, 0, MP_APIC_ALL, 0x1); - /* There is no extension information... */ - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/bap/ode_e21XX/romstage.c b/src/mainboard/bap/ode_e21XX/romstage.c deleted file mode 100644 index 6b116fd46f..0000000000 --- a/src/mainboard/bap/ode_e21XX/romstage.c +++ /dev/null @@ -1,42 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -#include <stdint.h> -#include <amdblocks/acpimmio.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <arch/cpu.h> -#include <console/console.h> -#include <northbridge/amd/agesa/state_machine.h> -#include <southbridge/amd/pi/hudson/hudson.h> -#include <superio/fintek/common/fintek.h> -#include <superio/fintek/f81866d/f81866d.h> - -#define SERIAL_DEV1 PNP_DEV(0x4e, F81866D_SP1) - -static void romstage_main_template(void) -{ - u32 val; - - /* - * In Hudson RRG, PMIOxD2[5:4] is "Drive strength control for - * LpcClk[1:0]". This following register setting has been - * replicated in every reference design since Parmer, so it is - * believed to be required even though it is not documented in - * the SoC BKDGs. Without this setting, there is no serial - * output. - */ - pm_io_write8(0xd2, 0); - - if (!cpu_init_detectedx && boot_cpu()) { - post_code(0x30); - fintek_enable_serial(SERIAL_DEV1, CONFIG_TTYS0_BASE); - post_code(0x31); - console_init(); - } -} - -void agesa_postcar(struct sysinfo *cb) -{ - /* After AMD_INIT_ENV -> move to ramstage ? */ - pm_io_write8(0xea, 1); -} |