Get rid of the unnecessary indirection by 'struct mem_controller' for the

Intel 810 chipset (and all boards using it). This isn't required for this
chipset as there's only one memory controller.

This also helps a lot with romcc register usage, you should see the dreaded
"too few registers" less often.

Build-tested with all three boards using the Intel 810 chipset.

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Corey Osgood <corey.osgood@gmail.com>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3764 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

2 files changed, 8 insertions, 25 deletions

diff --git a/src/mainboard/asus/mew-am/auto.c b/src/mainboard/asus/mew-am/auto.c
index 22cb164d37..ea09d6c371 100644
--- a/src/mainboard/asus/mew-am/auto.c
+++ b/src/mainboard/asus/mew-am/auto.c
@@ -48,17 +48,9 @@ static inline int spd_read_byte(unsigned int device, unsigned int address)
 
 #include "northbridge/intel/i82810/raminit.c"
 /* #include "northbridge/intel/i82810/debug.c" */
-#include "sdram/generic_sdram.c"
 
 static void main(unsigned long bist)
 {
-	static const struct mem_controller memctrl[] = {
-		{
-			.d0 = PCI_DEV(0, 0, 0),
-			.channel0 = {0x50, 0x51},
-		}
-	};
-
 	if (bist == 0)
 		early_mtrr_init();
 
@@ -67,7 +59,9 @@ static void main(unsigned long bist)
 	console_init();
 	report_bist_failure(bist);
 	enable_smbus();
-	/* dump_spd_registers(&memctrl[0]); */
-	sdram_initialize(ARRAY_SIZE(memctrl), memctrl);
+	/* dump_spd_registers(); */
+	sdram_set_registers();
+	sdram_set_spd_registers();
+	sdram_enable();
 	/* ram_check(0, 640 * 1024); */
 }
diff --git a/src/mainboard/asus/mew-vm/auto.c b/src/mainboard/asus/mew-vm/auto.c
index 78f9f48254..721f6116b1 100644
--- a/src/mainboard/asus/mew-vm/auto.c
+++ b/src/mainboard/asus/mew-vm/auto.c
@@ -52,17 +52,9 @@ void udelay(int usecs)
 
 #include "northbridge/intel/i82810/raminit.c"
 #include "northbridge/intel/i82810/debug.c"
-#include "sdram/generic_sdram.c"
 
 static void main(unsigned long bist)
 {
-	static const struct mem_controller memctrl[] = {
-		{
-		 .d0 = PCI_DEV(0, 0, 0),
-		 .channel0 = {0x50, 0x51},
-		 }
-	};
-
 	if (bist == 0)
 		early_mtrr_init();
 
@@ -75,14 +67,11 @@ static void main(unsigned long bist)
 	/* Halt if there was a built in self test failure. */
 	report_bist_failure(bist);
 
-	/* dump_spd_registers(&memctrl[0]); */
-
-	/* sdram_initialize() runs out of registers. */
-	/* sdram_initialize(ARRAY_SIZE(memctrl), memctrl); */
+	/* dump_spd_registers(); */
 
-	sdram_set_registers(memctrl);
-	sdram_set_spd_registers(memctrl);
-	sdram_enable(0, memctrl);
+	sdram_set_registers();
+	sdram_set_spd_registers();
+	sdram_enable();
 
 	/* Check RAM. */
 	/* ram_check(0, 640 * 1024); */