src: Get rid of unneeded whitespace

Change-Id: I630d49ab504d9f6e052806b516a600fa41b9a8da
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/26991
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>

5 files changed, 64 insertions, 64 deletions

diff --git a/src/mainboard/asus/kfsn4-dre/acpi/pm_ctrl.asl b/src/mainboard/asus/kfsn4-dre/acpi/pm_ctrl.asl
index 0afb841435..bde6fb628d 100644
--- a/src/mainboard/asus/kfsn4-dre/acpi/pm_ctrl.asl
+++ b/src/mainboard/asus/kfsn4-dre/acpi/pm_ctrl.asl
@@ -231,7 +231,7 @@
 
 		/* On older chips, clear PciExpWakeDisEn */
 		/*if (LLessEqual(\_SB.SBRI, 0x13)) {
-		*    	Store(0,\_SB.PWDE)
+		*	Store(0,\_SB.PWDE)
 		*}
 		*/
 
diff --git a/src/mainboard/asus/kfsn4-dre/dsdt.asl b/src/mainboard/asus/kfsn4-dre/dsdt.asl
index 2f1e86a14b..575715cf66 100644
--- a/src/mainboard/asus/kfsn4-dre/dsdt.asl
+++ b/src/mainboard/asus/kfsn4-dre/dsdt.asl
@@ -126,7 +126,7 @@ DefinitionBlock (
 			Notify (\_SB.PWRB, 0x02)		/* NOTIFY_DEVICE_WAKE */
 		}
 
-	} 	/* End Scope GPE */
+	}	/* End Scope GPE */
 
 	/* Root of the bus hierarchy */
 	Scope (\_SB)
diff --git a/src/mainboard/asus/kfsn4-dre/resourcemap.c b/src/mainboard/asus/kfsn4-dre/resourcemap.c
index cfbade68f2..f4e549b17f 100644
--- a/src/mainboard/asus/kfsn4-dre/resourcemap.c
+++ b/src/mainboard/asus/kfsn4-dre/resourcemap.c
@@ -226,7 +226,7 @@ static void setup_mb_resource_map(void)
 		 *	   This field defines the start of PCI I/O region n
 		 * [31:25] Reserved
 		 */
-// 		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC0), 0xFE000FCC, 0x00001013,
+//		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC0), 0xFE000FCC, 0x00001013,
 		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC8), 0xFE000FCC, 0x00000000,
 		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD0), 0xFE000FCC, 0x00000000,
 		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD8), 0xFE000FCC, 0x00000000,
diff --git a/src/mainboard/asus/kfsn4-dre/romstage.c b/src/mainboard/asus/kfsn4-dre/romstage.c
index 56a6bdffd5..2809f0fe91 100644
--- a/src/mainboard/asus/kfsn4-dre/romstage.c
+++ b/src/mainboard/asus/kfsn4-dre/romstage.c
@@ -318,8 +318,8 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 	 * IS_ENABLED(CONFIG_DEBUG_SMBUS) uncomment this block
 	 */
 	if (IS_ENABLED(CONFIG_DEBUG_SMBUS)) {
-	        dump_spd_registers(&cpu[0]);
-        	dump_smbus_registers();
+		dump_spd_registers(&cpu[0]);
+		dump_smbus_registers();
 	}
 #endif
 
@@ -344,8 +344,8 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 	/* Initialize GPIO */
 	/* Access SuperIO GPI03 logical device */
 	uint16_t port = GPIO3_DEV >> 8;
-        outb(0x87, port);
-        outb(0x87, port);
+	outb(0x87, port);
+	outb(0x87, port);
 	pnp_set_logical_device(GPIO3_DEV);
 	/* Set GP37 (power LED) to output */
 	pnp_write_config(GPIO3_DEV, 0xf0, 0x7f);
diff --git a/src/mainboard/asus/p3b-f/devicetree.cb b/src/mainboard/asus/p3b-f/devicetree.cb
index 5bee5ae96a..bc9ad17c93 100644
--- a/src/mainboard/asus/p3b-f/devicetree.cb
+++ b/src/mainboard/asus/p3b-f/devicetree.cb
@@ -1,59 +1,59 @@
 chip northbridge/intel/i440bx		# Northbridge
-  device cpu_cluster 0 on		# APIC cluster
-    chip cpu/intel/slot_1		# CPU
-      device lapic 0 on end		# APIC
-    end
-  end
-  device domain 0 on		# PCI domain
-    device pci 0.0 on end		# Host bridge
-    device pci 1.0 on end		# PCI/AGP bridge
-    chip southbridge/intel/i82371eb	# Southbridge
-      device pci 4.0 on			# ISA bridge
-        chip superio/winbond/w83977tf	# Super I/O (FIXME: It's W83977EF!)
-          device pnp 3f0.0 on		# Floppy
-            io 0x60 = 0x3f0
-            irq 0x70 = 6
-            drq 0x74 = 2
-          end
-          device pnp 3f0.1 on		# Parallel port
-            io 0x60 = 0x378
-            irq 0x70 = 7
-          end
-          device pnp 3f0.2 on		# COM1
-            io 0x60 = 0x3f8
-            irq 0x70 = 4
-          end
-          device pnp 3f0.3 on		# COM2 / IR
-            io 0x60 = 0x2f8
-            irq 0x70 = 3
-          end
-          device pnp 3f0.5 on		# PS/2 keyboard
-            io 0x60 = 0x60
-            io 0x62 = 0x64
-            irq 0x70 = 1		# PS/2 keyboard interrupt
-            irq 0x72 = 12		# PS/2 mouse interrupt
-          end
-          device pnp 3f0.6 on		# Consumer IR
-          end
-          device pnp 3f0.7 on		# GPIO 1
-          end
-          device pnp 3f0.8 on		# GPIO 2
-          end
-          device pnp 3f0.a on		# ACPI
-          end
-        end
-      end
-      device pci 4.1 on	end		# IDE
-      device pci 4.2 on	end		# USB
-      device pci 4.3 on end		# ACPI
-      register "ide0_enable" = "1"
-      register "ide1_enable" = "1"
-      register "ide_legacy_enable" = "1"
-      # Enable UDMA/33 for higher speed if your IDE device(s) support it.
-      register "ide0_drive0_udma33_enable" = "0"
-      register "ide0_drive1_udma33_enable" = "0"
-      register "ide1_drive0_udma33_enable" = "0"
-      register "ide1_drive1_udma33_enable" = "0"
-    end
-  end
+	device cpu_cluster 0 on		# APIC cluster
+	chip cpu/intel/slot_1		# CPU
+			device lapic 0 on end	# APIC
+		end
+	end
+	device domain 0 on	# PCI domain
+		device pci 0.0 on end	# Host bridge
+		device pci 1.0 on end	# PCI/AGP bridge
+		chip southbridge/intel/i82371eb	# Southbridge
+			device pci 4.0 on	# ISA bridge
+				chip superio/winbond/w83977tf	# Super I/O (FIXME: It's W83977EF!)
+					device pnp 3f0.0 on	# Floppy
+						io 0x60 = 0x3f0
+						irq 0x70 = 6
+						drq 0x74 = 2
+					end
+					device pnp 3f0.1 on	# Parallel port
+						io 0x60 = 0x378
+						irq 0x70 = 7
+					end
+					device pnp 3f0.2 on	# COM1
+						io 0x60 = 0x3f8
+						irq 0x70 = 4
+					end
+					device pnp 3f0.3 on	# COM2 / IR
+						io 0x60 = 0x2f8
+						irq 0x70 = 3
+					end
+					device pnp 3f0.5 on	# PS/2 keyboard
+						io 0x60 = 0x60
+						io 0x62 = 0x64
+						irq 0x70 = 1	# PS/2 keyboard interrupt
+						irq 0x72 = 12	# PS/2 mouse interrupt
+					end
+					device pnp 3f0.6 on	# Consumer IR
+					end
+					device pnp 3f0.7 on	# GPIO 1
+					end
+					device pnp 3f0.8 on	# GPIO 2
+					end
+					device pnp 3f0.a on	# ACPI
+					end
+				end
+			end
+			device pci 4.1 on	end	# IDE
+			device pci 4.2 on	end	# USB
+			device pci 4.3 on end		# ACPI
+			register "ide0_enable" = "1"
+			register "ide1_enable" = "1"
+			register "ide_legacy_enable" = "1"
+			# Enable UDMA/33 for higher speed if your IDE device(s) support it.
+			register "ide0_drive0_udma33_enable" = "0"
+			register "ide0_drive1_udma33_enable" = "0"
+			register "ide1_drive0_udma33_enable" = "0"
+			register "ide1_drive1_udma33_enable" = "0"
+		end
+	end
 end