Add ASUS M4A785T-M mainboard support

This mainboard is very similar to the M4A785-M, but it has
  DDR3 instead of DDR2.

That's why most of the code was copied or included from
  the m4a785-m directory

Notable changes between the two mainboards include:
 * the selection of the last microcode (mc_patch_010000b6.h)
   which made it pass the CPU init.
 * the selection of DDR3 which made it pass the ram init

This change was tested with the Trisquel 5.0 GNU/Linux distribution
  which uses the linux-libre version 2.6.38-12-generic

The mainboard boots fine, however some special care is required for
  the onboard sound CODEC, and the onboard video chip:
  * the onboard sound CODEC(snd-hda-* has to be blacklisted), the issue
    is the same than the ASUS M4A785-M mainboard:
    It causes a flood of interupts which prevents booting
  * The internal video chip currently requires pci=nocrs, else
    the graphics are frozen as soon as the radeon module loads,
    and dmesg would print the following(the card only has 256M,
    and the mainboard was equiped with 2G of RAM):
      [    3.674762] [drm] radeon: 3584M of VRAM memory ready
      [    3.679863] [drm] radeon: 512M of GTT memory ready.
    instead of :
      [   45.876088] [drm] radeon: 256M of VRAM memory ready
      [   45.876089] [drm] radeon: 512M of GTT memory ready.
  * The screen(both VGA and HDMI) flickers at high resolution
  * Sometimes the computer freeze while changing the resolution
    (even the serial console stops responding)

The following peripherals were tested:
 * The ath9k PCI wireless card was tested
 * The SATA hard disk works fine
 * the USB keyboard and mouse work fine
 * htop see 2 cores
 * serial port works under coreboot and GNU/Linux
 * power off and reboot works

CPU frequency cannot be changed yet, this is addressed
  in a new commit.

More detail are available here:
  http://www.coreboot.org/ASUS_M4A785T-M

dmesg is available here:
  http://www.coreboot.org/pipermail/coreboot/2011-November/067604.html

The mailing list thread on the graphic problem is here:
  http://www.coreboot.org/pipermail/coreboot/2011-November/067466.html

Change-Id: I5df0bc1f9f0071b1e1ee7c8a356bf517aa8cf732
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
Reviewed-on: http://review.coreboot.org/457
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>

1 files changed, 1850 insertions, 0 deletions

diff --git a/src/mainboard/asus/m4a785t-m/dsdt.asl b/src/mainboard/asus/m4a785t-m/dsdt.asl
new file mode 100644
index 0000000000..34ddd3a205
--- /dev/null
+++ b/src/mainboard/asus/m4a785t-m/dsdt.asl
@@ -0,0 +1,1850 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+/* DefinitionBlock Statement */
+DefinitionBlock (
+	"DSDT.AML",           /* Output filename */
+	"DSDT",                 /* Signature */
+	0x02,		/* DSDT Revision, needs to be 2 for 64bit */
+	"ASUS   ",               /* OEMID */
+	"M4A785-M ",	     /* TABLE ID */
+	0x00010001	/* OEM Revision */
+	)
+{	/* Start of ASL file */
+	/* #include "../../../arch/x86/acpi/debug.asl" */		/* Include global debug methods if needed */
+
+	/* Data to be patched by the BIOS during POST */
+	/* FIXME the patching is not done yet! */
+	/* Memory related values */
+	Name(LOMH, 0x0)	/* Start of unused memory in C0000-E0000 range */
+	Name(PBAD, 0x0)	/* Address of BIOS area (If TOM2 != 0, Addr >> 16) */
+	Name(PBLN, 0x0)	/* Length of BIOS area */
+
+	Name(PCBA, 0xE0000000)	/* Base address of PCIe config space */
+	Name(HPBA, 0xFED00000)	/* Base address of HPET table */
+
+	Name(SSFG, 0x0D)		/* S1 support: bit 0, S2 Support: bit 1, etc. S0 & S5 assumed */
+
+	/* USB overcurrent mapping pins.   */
+	Name(UOM0, 0)
+	Name(UOM1, 2)
+	Name(UOM2, 0)
+	Name(UOM3, 7)
+	Name(UOM4, 2)
+	Name(UOM5, 2)
+	Name(UOM6, 6)
+	Name(UOM7, 2)
+	Name(UOM8, 6)
+	Name(UOM9, 6)
+
+	/* Some global data */
+	Name(OSTP, 3)		/* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */
+	Name(OSV, Ones)	/* Assume nothing */
+	Name(PMOD, One)	/* Assume APIC */
+
+	/*
+	 * Processor Object
+	 *
+	 */
+	Scope (\_PR) {		/* define processor scope */
+		Processor(
+			CPU0,		/* name space name */
+			0,		/* Unique number for this processor */
+			0x808,		/* PBLK system I/O address !hardcoded! */
+			0x06		/* PBLKLEN for boot processor */
+			) {
+			#include "acpi/cpstate.asl"
+		}
+
+		Processor(
+			CPU1,		/* name space name */
+			1,		/* Unique number for this processor */
+			0x0000,		/* PBLK system I/O address !hardcoded! */
+			0x00		/* PBLKLEN for boot processor */
+			) {
+			#include "acpi/cpstate.asl"
+		}
+
+		Processor(
+			CPU2,		/* name space name */
+			2,		/* Unique number for this processor */
+			0x0000,		/* PBLK system I/O address !hardcoded! */
+			0x00		/* PBLKLEN for boot processor */
+			) {
+			#include "acpi/cpstate.asl"
+		}
+
+		Processor(
+			CPU3,		/* name space name */
+			3,		/* Unique number for this processor */
+			0x0000,		/* PBLK system I/O address !hardcoded! */
+			0x00		/* PBLKLEN for boot processor */
+			) {
+			#include "acpi/cpstate.asl"
+		}
+	} /* End _PR scope */
+
+	/* PIC IRQ mapping registers, C00h-C01h */
+	OperationRegion(PRQM, SystemIO, 0x00000C00, 0x00000002)
+		Field(PRQM, ByteAcc, NoLock, Preserve) {
+		PRQI, 0x00000008,
+		PRQD, 0x00000008,  /* Offset: 1h */
+	}
+	IndexField(PRQI, PRQD, ByteAcc, NoLock, Preserve) {
+		PINA, 0x00000008,	/* Index 0  */
+		PINB, 0x00000008,	/* Index 1 */
+		PINC, 0x00000008,	/* Index 2 */
+		PIND, 0x00000008,	/* Index 3 */
+		AINT, 0x00000008,	/* Index 4 */
+		SINT, 0x00000008,	/*  Index 5 */
+		, 0x00000008,	             /* Index 6 */
+		AAUD, 0x00000008,	/* Index 7 */
+		AMOD, 0x00000008,	/* Index 8 */
+		PINE, 0x00000008,	/* Index 9 */
+		PINF, 0x00000008,	/* Index A */
+		PING, 0x00000008,	/* Index B */
+		PINH, 0x00000008,	/* Index C */
+	}
+
+	/* PCI Error control register */
+	OperationRegion(PERC, SystemIO, 0x00000C14, 0x00000001)
+		Field(PERC, ByteAcc, NoLock, Preserve) {
+		SENS, 0x00000001,
+		PENS, 0x00000001,
+		SENE, 0x00000001,
+		PENE, 0x00000001,
+	}
+
+	/* Client Management index/data registers */
+	OperationRegion(CMT, SystemIO, 0x00000C50, 0x00000002)
+		Field(CMT, ByteAcc, NoLock, Preserve) {
+		CMTI,      8,
+		/* Client Management Data register */
+		G64E,   1,
+		G64O,      1,
+		G32O,      2,
+		,       2,
+		GPSL,     2,
+	}
+
+	/* GPM Port register */
+	OperationRegion(GPT, SystemIO, 0x00000C52, 0x00000001)
+		Field(GPT, ByteAcc, NoLock, Preserve) {
+		GPB0,1,
+		GPB1,1,
+		GPB2,1,
+		GPB3,1,
+		GPB4,1,
+		GPB5,1,
+		GPB6,1,
+		GPB7,1,
+	}
+
+	/* Flash ROM program enable register */
+	OperationRegion(FRE, SystemIO, 0x00000C6F, 0x00000001)
+		Field(FRE, ByteAcc, NoLock, Preserve) {
+		,     0x00000006,
+		FLRE, 0x00000001,
+	}
+
+	/* PM2 index/data registers */
+	OperationRegion(PM2R, SystemIO, 0x00000CD0, 0x00000002)
+		Field(PM2R, ByteAcc, NoLock, Preserve) {
+		PM2I, 0x00000008,
+		PM2D, 0x00000008,
+	}
+
+	/* Power Management I/O registers */
+	OperationRegion(PIOR, SystemIO, 0x00000CD6, 0x00000002)
+		Field(PIOR, ByteAcc, NoLock, Preserve) {
+		PIOI, 0x00000008,
+		PIOD, 0x00000008,
+	}
+	IndexField (PIOI, PIOD, ByteAcc, NoLock, Preserve) {
+		Offset(0x00),	/* MiscControl */
+		, 1,
+		T1EE, 1,
+		T2EE, 1,
+		Offset(0x01),	/* MiscStatus */
+		, 1,
+		T1E, 1,
+		T2E, 1,
+		Offset(0x04),	/* SmiWakeUpEventEnable3 */
+		, 7,
+		SSEN, 1,
+		Offset(0x07),	/* SmiWakeUpEventStatus3 */
+		, 7,
+		CSSM, 1,
+		Offset(0x10),	/* AcpiEnable */
+		, 6,
+		PWDE, 1,
+		Offset(0x1C),	/* ProgramIoEnable */
+		, 3,
+		MKME, 1,
+		IO3E, 1,
+		IO2E, 1,
+		IO1E, 1,
+		IO0E, 1,
+		Offset(0x1D),	/* IOMonitorStatus */
+		, 3,
+		MKMS, 1,
+		IO3S, 1,
+		IO2S, 1,
+		IO1S, 1,
+		IO0S,1,
+		Offset(0x20),	/* AcpiPmEvtBlk */
+		APEB, 16,
+		Offset(0x36),	/* GEvtLevelConfig */
+		, 6,
+		ELC6, 1,
+		ELC7, 1,
+		Offset(0x37),	/* GPMLevelConfig0 */
+		, 3,
+		PLC0, 1,
+		PLC1, 1,
+		PLC2, 1,
+		PLC3, 1,
+		PLC8, 1,
+		Offset(0x38),	/* GPMLevelConfig1 */
+		, 1,
+		 PLC4, 1,
+		 PLC5, 1,
+		, 1,
+		 PLC6, 1,
+		 PLC7, 1,
+		Offset(0x3B),	/* PMEStatus1 */
+		GP0S, 1,
+		GM4S, 1,
+		GM5S, 1,
+		APS, 1,
+		GM6S, 1,
+		GM7S, 1,
+		GP2S, 1,
+		STSS, 1,
+		Offset(0x55),	/* SoftPciRst */
+		SPRE, 1,
+		, 1,
+		, 1,
+		PNAT, 1,
+		PWMK, 1,
+		PWNS, 1,
+
+		/* 	Offset(0x61), */	/*  Options_1 */
+		/* 		,7,  */
+		/* 		R617,1, */
+
+		Offset(0x65),	/* UsbPMControl */
+		, 4,
+		URRE, 1,
+		Offset(0x68),	/* MiscEnable68 */
+		, 3,
+		TMTE, 1,
+		, 1,
+		Offset(0x92),	/* GEVENTIN */
+		, 7,
+		E7IS, 1,
+		Offset(0x96),	/* GPM98IN */
+		G8IS, 1,
+		G9IS, 1,
+		Offset(0x9A),	/* EnhanceControl */
+		,7,
+		HPDE, 1,
+		Offset(0xA8),	/* PIO7654Enable */
+		IO4E, 1,
+		IO5E, 1,
+		IO6E, 1,
+		IO7E, 1,
+		Offset(0xA9),	/* PIO7654Status */
+		IO4S, 1,
+		IO5S, 1,
+		IO6S, 1,
+		IO7S, 1,
+	}
+
+	/* PM1 Event Block
+	* First word is PM1_Status, Second word is PM1_Enable
+	*/
+	OperationRegion(P1EB, SystemIO, APEB, 0x04)
+		Field(P1EB, ByteAcc, NoLock, Preserve) {
+		TMST, 1,
+		,    3,
+		BMST,    1,
+		GBST,   1,
+		Offset(0x01),
+		PBST, 1,
+		, 1,
+		RTST, 1,
+		, 3,
+		PWST, 1,
+		SPWS, 1,
+		Offset(0x02),
+		TMEN, 1,
+		, 4,
+		GBEN, 1,
+		Offset(0x03),
+		PBEN, 1,
+		, 1,
+		RTEN, 1,
+		, 3,
+		PWDA, 1,
+	}
+
+	Scope(\_SB) {
+		/* PCIe Configuration Space for 16 busses */
+		OperationRegion(PCFG, SystemMemory, PCBA, 0x01000000) /* Each bus consumes 1MB */
+			Field(PCFG, ByteAcc, NoLock, Preserve) {
+			/* Byte offsets are computed using the following technique:
+			 * ((bus number + 1) * ((device number * 8) * 4096)) + register offset
+			 * The 8 comes from 8 functions per device, and 4096 bytes per function config space
+			*/
+			Offset(0x00088024),	/* Byte offset to SATA register 24h - Bus 0, Device 17, Function 0 */
+			STB5, 32,
+			Offset(0x00098042),	/* Byte offset to OHCI0 register 42h - Bus 0, Device 19, Function 0 */
+			PT0D, 1,
+			PT1D, 1,
+			PT2D, 1,
+			PT3D, 1,
+			PT4D, 1,
+			PT5D, 1,
+			PT6D, 1,
+			PT7D, 1,
+			PT8D, 1,
+			PT9D, 1,
+			Offset(0x000A0004),	/* Byte offset to SMBUS	register 4h - Bus 0, Device 20, Function 0 */
+			SBIE, 1,
+			SBME, 1,
+			Offset(0x000A0008),	/* Byte offset to SMBUS	register 8h - Bus 0, Device 20, Function 0 */
+			SBRI, 8,
+			Offset(0x000A0014),	/* Byte offset to SMBUS	register 14h - Bus 0, Device 20, Function 0 */
+			SBB1, 32,
+			Offset(0x000A0078),	/* Byte offset to SMBUS	register 78h - Bus 0, Device 20, Function 0 */
+			,14,
+			P92E, 1,		/* Port92 decode enable */
+		}
+
+		OperationRegion(SB5, SystemMemory, STB5, 0x1000)
+			Field(SB5, AnyAcc, NoLock, Preserve){
+			/* Port 0 */
+			Offset(0x120),		/* Port 0 Task file status */
+			P0ER, 1,
+			, 2,
+			P0DQ, 1,
+			, 3,
+			P0BY, 1,
+			Offset(0x128),		/* Port 0 Serial ATA status */
+			P0DD, 4,
+			, 4,
+			P0IS, 4,
+			Offset(0x12C),		/* Port 0 Serial ATA control */
+			P0DI, 4,
+			Offset(0x130),		/* Port 0 Serial ATA error */
+			, 16,
+			P0PR, 1,
+
+			/* Port 1 */
+			offset(0x1A0),		/* Port 1 Task file status */
+			P1ER, 1,
+			, 2,
+			P1DQ, 1,
+			, 3,
+			P1BY, 1,
+			Offset(0x1A8),		/* Port 1 Serial ATA status */
+			P1DD, 4,
+			, 4,
+			P1IS, 4,
+			Offset(0x1AC),		/* Port 1 Serial ATA control */
+			P1DI, 4,
+			Offset(0x1B0),		/* Port 1 Serial ATA error */
+			, 16,
+			P1PR, 1,
+
+			/* Port 2 */
+			Offset(0x220),		/* Port 2 Task file status */
+			P2ER, 1,
+			, 2,
+			P2DQ, 1,
+			, 3,
+			P2BY, 1,
+			Offset(0x228),		/* Port 2 Serial ATA status */
+			P2DD, 4,
+			, 4,
+			P2IS, 4,
+			Offset(0x22C),		/* Port 2 Serial ATA control */
+			P2DI, 4,
+			Offset(0x230),		/* Port 2 Serial ATA error */
+			, 16,
+			P2PR, 1,
+
+			/* Port 3 */
+			Offset(0x2A0),		/* Port 3 Task file status */
+			P3ER, 1,
+			, 2,
+			P3DQ, 1,
+			, 3,
+			P3BY, 1,
+			Offset(0x2A8),		/* Port 3 Serial ATA status */
+			P3DD, 4,
+			, 4,
+			P3IS, 4,
+			Offset(0x2AC),		/* Port 3 Serial ATA control */
+			P3DI, 4,
+			Offset(0x2B0),		/* Port 3 Serial ATA error */
+			, 16,
+			P3PR, 1,
+		}
+	}
+
+
+	#include "acpi/routing.asl"
+
+	Scope(\_SB) {
+
+		Method(CkOT, 0){
+
+			if(LNotEqual(OSTP, Ones)) {Return(OSTP)}	/* OS version was already detected */
+
+			if(CondRefOf(\_OSI,Local1))
+			{
+				Store(1, OSTP)                /* Assume some form of XP */
+				if (\_OSI("Windows 2006"))      /* Vista */
+				{
+					Store(2, OSTP)
+				}
+			} else {
+				If(WCMP(\_OS,"Linux")) {
+					Store(3, OSTP)            /* Linux */
+				} Else {
+					Store(4, OSTP)            /* Gotta be WinCE */
+				}
+			}
+			Return(OSTP)
+		}
+
+		Method(_PIC, 0x01, NotSerialized)
+		{
+			If (Arg0)
+			{
+				\_SB.CIRQ()
+			}
+			Store(Arg0, PMOD)
+		}
+		Method(CIRQ, 0x00, NotSerialized){
+			Store(0, PINA)
+			Store(0, PINB)
+			Store(0, PINC)
+			Store(0, PIND)
+			Store(0, PINE)
+			Store(0, PINF)
+			Store(0, PING)
+			Store(0, PINH)
+		}
+
+		Name(IRQB, ResourceTemplate(){
+			IRQ(Level,ActiveLow,Shared){15}
+		})
+
+		Name(IRQP, ResourceTemplate(){
+			IRQ(Level,ActiveLow,Exclusive){3, 4, 5, 7, 10, 11, 12, 15}
+		})
+
+		Name(PITF, ResourceTemplate(){
+			IRQ(Level,ActiveLow,Exclusive){9}
+		})
+
+		Device(INTA) {
+			Name(_HID, EISAID("PNP0C0F"))
+			Name(_UID, 1)
+
+			Method(_STA, 0) {
+				if (PINA) {
+					Return(0x0B) /* sata is invisible */
+				} else {
+					Return(0x09) /* sata is disabled */
+				}
+			} /* End Method(_SB.INTA._STA) */
+
+			Method(_DIS ,0) {
+				/* DBGO("\\_SB\\LNKA\\_DIS\n") */
+				Store(0, PINA)
+			} /* End Method(_SB.INTA._DIS) */
+
+			Method(_PRS ,0) {
+				/* DBGO("\\_SB\\LNKA\\_PRS\n") */
+				Return(IRQP)
+			} /* Method(_SB.INTA._PRS) */
+
+			Method(_CRS ,0) {
+				/* DBGO("\\_SB\\LNKA\\_CRS\n") */
+				CreateWordField(IRQB, 0x1, IRQN)
+				ShiftLeft(1, PINA, IRQN)
+				Return(IRQB)
+			} /* Method(_SB.INTA._CRS) */
+
+			Method(_SRS, 1) {
+				/* DBGO("\\_SB\\LNKA\\_CRS\n") */
+				CreateWordField(ARG0, 1, IRQM)
+
+				/* Use lowest available IRQ */
+				FindSetRightBit(IRQM, Local0)
+				if (Local0) {
+					Decrement(Local0)
+				}
+				Store(Local0, PINA)
+			} /* End Method(_SB.INTA._SRS) */
+		} /* End Device(INTA) */
+
+		Device(INTB) {
+			Name(_HID, EISAID("PNP0C0F"))
+			Name(_UID, 2)
+
+			Method(_STA, 0) {
+				if (PINB) {
+					Return(0x0B) /* sata is invisible */
+				} else {
+					Return(0x09) /* sata is disabled */
+				}
+			} /* End Method(_SB.INTB._STA) */
+
+			Method(_DIS ,0) {
+				/* DBGO("\\_SB\\LNKB\\_DIS\n") */
+				Store(0, PINB)
+			} /* End Method(_SB.INTB._DIS) */
+
+			Method(_PRS ,0) {
+				/* DBGO("\\_SB\\LNKB\\_PRS\n") */
+				Return(IRQP)
+			} /* Method(_SB.INTB._PRS) */
+
+			Method(_CRS ,0) {
+				/* DBGO("\\_SB\\LNKB\\_CRS\n") */
+				CreateWordField(IRQB, 0x1, IRQN)
+				ShiftLeft(1, PINB, IRQN)
+				Return(IRQB)
+			} /* Method(_SB.INTB._CRS) */
+
+			Method(_SRS, 1) {
+				/* DBGO("\\_SB\\LNKB\\_CRS\n") */
+				CreateWordField(ARG0, 1, IRQM)
+
+				/* Use lowest available IRQ */
+				FindSetRightBit(IRQM, Local0)
+				if (Local0) {
+					Decrement(Local0)
+				}
+				Store(Local0, PINB)
+			} /* End Method(_SB.INTB._SRS) */
+		} /* End Device(INTB)  */
+
+		Device(INTC) {
+			Name(_HID, EISAID("PNP0C0F"))
+			Name(_UID, 3)
+
+			Method(_STA, 0) {
+				if (PINC) {
+					Return(0x0B) /* sata is invisible */
+				} else {
+					Return(0x09) /* sata is disabled */
+				}
+			} /* End Method(_SB.INTC._STA) */
+
+			Method(_DIS ,0) {
+				/* DBGO("\\_SB\\LNKC\\_DIS\n") */
+				Store(0, PINC)
+			} /* End Method(_SB.INTC._DIS) */
+
+			Method(_PRS ,0) {
+				/* DBGO("\\_SB\\LNKC\\_PRS\n") */
+				Return(IRQP)
+			} /* Method(_SB.INTC._PRS) */
+
+			Method(_CRS ,0) {
+				/* DBGO("\\_SB\\LNKC\\_CRS\n") */
+				CreateWordField(IRQB, 0x1, IRQN)
+				ShiftLeft(1, PINC, IRQN)
+				Return(IRQB)
+			} /* Method(_SB.INTC._CRS) */
+
+			Method(_SRS, 1) {
+				/* DBGO("\\_SB\\LNKC\\_CRS\n") */
+				CreateWordField(ARG0, 1, IRQM)
+
+				/* Use lowest available IRQ */
+				FindSetRightBit(IRQM, Local0)
+				if (Local0) {
+					Decrement(Local0)
+				}
+				Store(Local0, PINC)
+			} /* End Method(_SB.INTC._SRS) */
+		} /* End Device(INTC)  */
+
+		Device(INTD) {
+			Name(_HID, EISAID("PNP0C0F"))
+			Name(_UID, 4)
+
+			Method(_STA, 0) {
+				if (PIND) {
+					Return(0x0B) /* sata is invisible */
+				} else {
+					Return(0x09) /* sata is disabled */
+				}
+			} /* End Method(_SB.INTD._STA) */
+
+			Method(_DIS ,0) {
+				/* DBGO("\\_SB\\LNKD\\_DIS\n") */
+				Store(0, PIND)
+			} /* End Method(_SB.INTD._DIS) */
+
+			Method(_PRS ,0) {
+				/* DBGO("\\_SB\\LNKD\\_PRS\n") */
+				Return(IRQP)
+			} /* Method(_SB.INTD._PRS) */
+
+			Method(_CRS ,0) {
+				/* DBGO("\\_SB\\LNKD\\_CRS\n") */
+				CreateWordField(IRQB, 0x1, IRQN)
+				ShiftLeft(1, PIND, IRQN)
+				Return(IRQB)
+			} /* Method(_SB.INTD._CRS) */
+
+			Method(_SRS, 1) {
+				/* DBGO("\\_SB\\LNKD\\_CRS\n") */
+				CreateWordField(ARG0, 1, IRQM)
+
+				/* Use lowest available IRQ */
+				FindSetRightBit(IRQM, Local0)
+				if (Local0) {
+					Decrement(Local0)
+				}
+				Store(Local0, PIND)
+			} /* End Method(_SB.INTD._SRS) */
+		} /* End Device(INTD)  */
+
+		Device(INTE) {
+			Name(_HID, EISAID("PNP0C0F"))
+			Name(_UID, 5)
+
+			Method(_STA, 0) {
+				if (PINE) {
+					Return(0x0B) /* sata is invisible */
+				} else {
+					Return(0x09) /* sata is disabled */
+				}
+			} /* End Method(_SB.INTE._STA) */
+
+			Method(_DIS ,0) {
+				/* DBGO("\\_SB\\LNKE\\_DIS\n") */
+				Store(0, PINE)
+			} /* End Method(_SB.INTE._DIS) */
+
+			Method(_PRS ,0) {
+				/* DBGO("\\_SB\\LNKE\\_PRS\n") */
+				Return(IRQP)
+			} /* Method(_SB.INTE._PRS) */
+
+			Method(_CRS ,0) {
+				/* DBGO("\\_SB\\LNKE\\_CRS\n") */
+				CreateWordField(IRQB, 0x1, IRQN)
+				ShiftLeft(1, PINE, IRQN)
+				Return(IRQB)
+			} /* Method(_SB.INTE._CRS) */
+
+			Method(_SRS, 1) {
+				/* DBGO("\\_SB\\LNKE\\_CRS\n") */
+				CreateWordField(ARG0, 1, IRQM)
+
+				/* Use lowest available IRQ */
+				FindSetRightBit(IRQM, Local0)
+				if (Local0) {
+					Decrement(Local0)
+				}
+				Store(Local0, PINE)
+			} /* End Method(_SB.INTE._SRS) */
+		} /* End Device(INTE)  */
+
+		Device(INTF) {
+			Name(_HID, EISAID("PNP0C0F"))
+			Name(_UID, 6)
+
+			Method(_STA, 0) {
+				if (PINF) {
+					Return(0x0B) /* sata is invisible */
+				} else {
+					Return(0x09) /* sata is disabled */
+				}
+			} /* End Method(_SB.INTF._STA) */
+
+			Method(_DIS ,0) {
+				/* DBGO("\\_SB\\LNKF\\_DIS\n") */
+				Store(0, PINF)
+			} /* End Method(_SB.INTF._DIS) */
+
+			Method(_PRS ,0) {
+				/* DBGO("\\_SB\\LNKF\\_PRS\n") */
+				Return(PITF)
+			} /* Method(_SB.INTF._PRS) */
+
+			Method(_CRS ,0) {
+				/* DBGO("\\_SB\\LNKF\\_CRS\n") */
+				CreateWordField(IRQB, 0x1, IRQN)
+				ShiftLeft(1, PINF, IRQN)
+				Return(IRQB)
+			} /* Method(_SB.INTF._CRS) */
+
+			Method(_SRS, 1) {
+				/* DBGO("\\_SB\\LNKF\\_CRS\n") */
+				CreateWordField(ARG0, 1, IRQM)
+
+				/* Use lowest available IRQ */
+				FindSetRightBit(IRQM, Local0)
+				if (Local0) {
+					Decrement(Local0)
+				}
+				Store(Local0, PINF)
+			} /*  End Method(_SB.INTF._SRS) */
+		} /* End Device(INTF)  */
+
+		Device(INTG) {
+			Name(_HID, EISAID("PNP0C0F"))
+			Name(_UID, 7)
+
+			Method(_STA, 0) {
+				if (PING) {
+					Return(0x0B) /* sata is invisible */
+				} else {
+					Return(0x09) /* sata is disabled */
+				}
+			} /* End Method(_SB.INTG._STA)  */
+
+			Method(_DIS ,0) {
+				/* DBGO("\\_SB\\LNKG\\_DIS\n") */
+				Store(0, PING)
+			} /* End Method(_SB.INTG._DIS)  */
+
+			Method(_PRS ,0) {
+				/* DBGO("\\_SB\\LNKG\\_PRS\n") */
+				Return(IRQP)
+			} /* Method(_SB.INTG._CRS)  */
+
+			Method(_CRS ,0) {
+				/* DBGO("\\_SB\\LNKG\\_CRS\n") */
+				CreateWordField(IRQB, 0x1, IRQN)
+				ShiftLeft(1, PING, IRQN)
+				Return(IRQB)
+			} /* Method(_SB.INTG._CRS)  */
+
+			Method(_SRS, 1) {
+				/* DBGO("\\_SB\\LNKG\\_CRS\n") */
+				CreateWordField(ARG0, 1, IRQM)
+
+				/* Use lowest available IRQ */
+				FindSetRightBit(IRQM, Local0)
+				if (Local0) {
+					Decrement(Local0)
+				}
+				Store(Local0, PING)
+			} /* End Method(_SB.INTG._SRS)  */
+		} /* End Device(INTG)  */
+
+		Device(INTH) {
+			Name(_HID, EISAID("PNP0C0F"))
+			Name(_UID, 8)
+
+			Method(_STA, 0) {
+				if (PINH) {
+					Return(0x0B) /* sata is invisible */
+				} else {
+					Return(0x09) /* sata is disabled */
+				}
+			} /* End Method(_SB.INTH._STA)  */
+
+			Method(_DIS ,0) {
+				/* DBGO("\\_SB\\LNKH\\_DIS\n") */
+				Store(0, PINH)
+			} /* End Method(_SB.INTH._DIS)  */
+
+			Method(_PRS ,0) {
+				/* DBGO("\\_SB\\LNKH\\_PRS\n") */
+				Return(IRQP)
+			} /* Method(_SB.INTH._CRS)  */
+
+			Method(_CRS ,0) {
+				/* DBGO("\\_SB\\LNKH\\_CRS\n") */
+				CreateWordField(IRQB, 0x1, IRQN)
+				ShiftLeft(1, PINH, IRQN)
+				Return(IRQB)
+			} /* Method(_SB.INTH._CRS)  */
+
+			Method(_SRS, 1) {
+				/* DBGO("\\_SB\\LNKH\\_CRS\n") */
+				CreateWordField(ARG0, 1, IRQM)
+
+				/* Use lowest available IRQ */
+				FindSetRightBit(IRQM, Local0)
+				if (Local0) {
+					Decrement(Local0)
+				}
+				Store(Local0, PINH)
+			} /* End Method(_SB.INTH._SRS)  */
+		} /* End Device(INTH)   */
+
+	}   /* End Scope(_SB)  */
+
+
+	/* Supported sleep states: */
+	Name(\_S0, Package () {0x00, 0x00, 0x00, 0x00} )	/* (S0) - working state */
+
+	If (LAnd(SSFG, 0x01)) {
+		Name(\_S1, Package () {0x01, 0x01, 0x00, 0x00} )	/* (S1) - sleeping w/CPU context */
+	}
+	If (LAnd(SSFG, 0x02)) {
+		Name(\_S2, Package () {0x02, 0x02, 0x00, 0x00} )	/* (S2) - "light" Suspend to RAM */
+	}
+	If (LAnd(SSFG, 0x04)) {
+		Name(\_S3, Package () {0x03, 0x03, 0x00, 0x00} )	/* (S3) - Suspend to RAM */
+	}
+	If (LAnd(SSFG, 0x08)) {
+		Name(\_S4, Package () {0x04, 0x04, 0x00, 0x00} )	/* (S4) - Suspend to Disk */
+	}
+
+	Name(\_S5, Package () {0x05, 0x05, 0x00, 0x00} )	/* (S5) - Soft Off */
+
+	Name(\_SB.CSPS ,0)				/* Current Sleep State (S0, S1, S2, S3, S4, S5) */
+	Name(CSMS, 0)			/* Current System State */
+
+	/* Wake status package */
+	Name(WKST,Package(){Zero, Zero})
+
+	/*
+	* \_PTS - Prepare to Sleep method
+	*
+	*	Entry:
+	*		Arg0=The value of the sleeping state S1=1, S2=2, etc
+	*
+	* Exit:
+	*		-none-
+	*
+	* The _PTS control method is executed at the beginning of the sleep process
+	* for S1-S5. The sleeping value is passed to the _PTS control method.	This
+	* control method may be executed a relatively long time before entering the
+	* sleep state and the OS may abort	the operation without notification to
+	* the ACPI driver.  This method cannot modify the configuration or power
+	* state of any device in the system.
+	*/
+	Method(\_PTS, 1) {
+		/* DBGO("\\_PTS\n") */
+		/* DBGO("From S0 to S") */
+		/* DBGO(Arg0) */
+		/* DBGO("\n") */
+
+		/* Don't allow PCIRST# to reset USB */
+		if (LEqual(Arg0,3)){
+			Store(0,URRE)
+		}
+
+		/* Clear sleep SMI status flag and enable sleep SMI trap. */
+		/*Store(One, CSSM)
+		Store(One, SSEN)*/
+
+		/* On older chips, clear PciExpWakeDisEn */
+		/*if (LLessEqual(\_SB.SBRI, 0x13)) {
+		*    	Store(0,\_SB.PWDE)
+		*}
+		*/
+
+		/* Clear wake status structure. */
+		Store(0, Index(WKST,0))
+		Store(0, Index(WKST,1))
+		\_SB.PCI0.SIOS (Arg0)
+	} /* End Method(\_PTS) */
+
+	/*
+	*  The following method results in a "not a valid reserved NameSeg"
+	*  warning so I have commented it out for the duration.  It isn't
+	*  used, so it could be removed.
+	*
+	*
+	*  	\_GTS OEM Going To Sleep method
+	*
+	*  	Entry:
+	*  		Arg0=The value of the sleeping state S1=1, S2=2
+	*
+	*  	Exit:
+	*  		-none-
+	*
+	*  Method(\_GTS, 1) {
+	*  DBGO("\\_GTS\n")
+	*  DBGO("From S0 to S")
+	*  DBGO(Arg0)
+	*  DBGO("\n")
+	*  }
+	*/
+
+	/*
+	*	\_BFS OEM Back From Sleep method
+	*
+	*	Entry:
+	*		Arg0=The value of the sleeping state S1=1, S2=2
+	*
+	*	Exit:
+	*		-none-
+	*/
+	Method(\_BFS, 1) {
+		/* DBGO("\\_BFS\n") */
+		/* DBGO("From S") */
+		/* DBGO(Arg0) */
+		/* DBGO(" to S0\n") */
+	}
+
+	/*
+	*  \_WAK System Wake method
+	*
+	*	Entry:
+	*		Arg0=The value of the sleeping state S1=1, S2=2
+	*
+	*	Exit:
+	*		Return package of 2 DWords
+	*		Dword 1 - Status
+	*			0x00000000	wake succeeded
+	*			0x00000001	Wake was signaled but failed due to lack of power
+	*			0x00000002	Wake was signaled but failed due to thermal condition
+	*		Dword 2 - Power Supply state
+	*			if non-zero the effective S-state the power supply entered
+	*/
+	Method(\_WAK, 1) {
+		/* DBGO("\\_WAK\n") */
+		/* DBGO("From S") */
+		/* DBGO(Arg0) */
+		/* DBGO(" to S0\n") */
+
+		/* Re-enable HPET */
+		Store(1,HPDE)
+
+		/* Restore PCIRST# so it resets USB */
+		if (LEqual(Arg0,3)){
+			Store(1,URRE)
+		}
+
+		/* Arbitrarily clear PciExpWakeStatus */
+		Store(PWST, PWST)
+
+		/* if(DeRefOf(Index(WKST,0))) {
+		*	Store(0, Index(WKST,1))
+		* } else {
+		*	Store(Arg0, Index(WKST,1))
+		* }
+		*/
+		\_SB.PCI0.SIOW (Arg0)
+		Return(WKST)
+	} /* End Method(\_WAK) */
+
+	Scope(\_GPE) {	/* Start Scope GPE */
+		/*  General event 0  */
+		/* Method(_L00) {
+		*	DBGO("\\_GPE\\_L00\n")
+		* }
+		*/
+
+		/*  General event 1  */
+		/* Method(_L01) {
+		*	DBGO("\\_GPE\\_L00\n")
+		* }
+		*/
+
+		/*  General event 2  */
+		/* Method(_L02) {
+		*	DBGO("\\_GPE\\_L00\n")
+		* }
+		*/
+
+		/*  General event 3  */
+		Method(_L03) {
+			/* DBGO("\\_GPE\\_L00\n") */
+			Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+		}
+
+		/*  General event 4  */
+		/* Method(_L04) {
+		*	DBGO("\\_GPE\\_L00\n")
+		* }
+		*/
+
+		/*  General event 5  */
+		/* Method(_L05) {
+		*	DBGO("\\_GPE\\_L00\n")
+		* }
+		*/
+
+		/*  General event 6 - Used for GPM6, moved to USB.asl */
+		/* Method(_L06) {
+		*	DBGO("\\_GPE\\_L00\n")
+		* }
+		*/
+
+		/*  General event 7 - Used for GPM7, moved to USB.asl */
+		/* Method(_L07) {
+		*	DBGO("\\_GPE\\_L07\n")
+		* }
+		*/
+
+		/*  Legacy PM event  */
+		Method(_L08) {
+			/* DBGO("\\_GPE\\_L08\n") */
+		}
+
+		/*  Temp warning (TWarn) event  */
+		Method(_L09) {
+			/* DBGO("\\_GPE\\_L09\n") */
+			Notify (\_TZ.TZ00, 0x80)
+		}
+
+		/*  Reserved  */
+		/* Method(_L0A) {
+		*	DBGO("\\_GPE\\_L0A\n")
+		* }
+		*/
+
+		/*  USB controller PME#  */
+		Method(_L0B) {
+			/* DBGO("\\_GPE\\_L0B\n") */
+			Notify(\_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+		}
+
+		/*  AC97 controller PME#  */
+		/* Method(_L0C) {
+		*	DBGO("\\_GPE\\_L0C\n")
+		* }
+		*/
+
+		/*  OtherTherm PME#  */
+		/* Method(_L0D) {
+		*	DBGO("\\_GPE\\_L0D\n")
+		* }
+		*/
+
+		/*  GPM9 SCI event - Moved to USB.asl */
+		/* Method(_L0E) {
+		*	DBGO("\\_GPE\\_L0E\n")
+		* }
+		*/
+
+		/*  PCIe HotPlug event  */
+		/* Method(_L0F) {
+		* 	DBGO("\\_GPE\\_L0F\n")
+		* }
+		*/
+
+		/*  ExtEvent0 SCI event  */
+		Method(_L10) {
+			/* DBGO("\\_GPE\\_L10\n") */
+		}
+
+
+		/*  ExtEvent1 SCI event  */
+		Method(_L11) {
+			/* DBGO("\\_GPE\\_L11\n") */
+		}
+
+		/*  PCIe PME# event  */
+		/* Method(_L12) {
+		*	DBGO("\\_GPE\\_L12\n")
+		* }
+		*/
+
+		/*  GPM0 SCI event - Moved to USB.asl */
+		/* Method(_L13) {
+		* 	DBGO("\\_GPE\\_L13\n")
+		* }
+		*/
+
+		/*  GPM1 SCI event - Moved to USB.asl */
+		/* Method(_L14) {
+		* 	DBGO("\\_GPE\\_L14\n")
+		* }
+		*/
+
+		/*  GPM2 SCI event - Moved to USB.asl */
+		/* Method(_L15) {
+		* 	DBGO("\\_GPE\\_L15\n")
+		* }
+		*/
+
+		/*  GPM3 SCI event - Moved to USB.asl */
+		/* Method(_L16) {
+		*	DBGO("\\_GPE\\_L16\n")
+		* }
+		*/
+
+		/*  GPM8 SCI event - Moved to USB.asl */
+		/* Method(_L17) {
+		* 	DBGO("\\_GPE\\_L17\n")
+		* }
+		*/
+
+		/*  GPIO0 or GEvent8 event  */
+		Method(_L18) {
+			/* DBGO("\\_GPE\\_L18\n") */
+			Notify(\_SB.PCI0.PBR2, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+		}
+
+		/*  GPM4 SCI event - Moved to USB.asl */
+		/* Method(_L19) {
+		* 	DBGO("\\_GPE\\_L19\n")
+		* }
+		*/
+
+		/*  GPM5 SCI event - Moved to USB.asl */
+		/* Method(_L1A) {
+		*	DBGO("\\_GPE\\_L1A\n")
+		* }
+		*/
+
+		/*  Azalia SCI event  */
+		Method(_L1B) {
+			/* DBGO("\\_GPE\\_L1B\n") */
+			Notify(\_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+		}
+
+		/*  GPM6 SCI event - Reassigned to _L06 */
+		/* Method(_L1C) {
+		*	DBGO("\\_GPE\\_L1C\n")
+		* }
+		*/
+
+		/*  GPM7 SCI event - Reassigned to _L07 */
+		/* Method(_L1D) {
+		*	DBGO("\\_GPE\\_L1D\n")
+		* }
+		*/
+
+		/*  GPIO2 or GPIO66 SCI event  */
+		/* Method(_L1E) {
+		* 	DBGO("\\_GPE\\_L1E\n")
+		* }
+		*/
+
+		/*  SATA SCI event - Moved to sata.asl */
+		/* Method(_L1F) {
+		*	 DBGO("\\_GPE\\_L1F\n")
+		* }
+		*/
+
+	} 	/* End Scope GPE */
+
+	#include "acpi/usb.asl"
+
+	/* South Bridge */
+	Scope(\_SB) { /* Start \_SB scope */
+		#include "../../../arch/x86/acpi/globutil.asl" /* global utility methods expected within the \_SB scope */
+
+		/*  _SB.PCI0 */
+		/* Note: Only need HID on Primary Bus */
+		Device(PCI0) {
+			External (TOM1)
+			External (TOM2) /* (<real tom2> >> 20) to make it fit into 32 bit for XP */
+			Name(_HID, EISAID("PNP0A03"))
+			Name(_ADR, 0x00180000)	/* Dev# = BSP Dev#, Func# = 0 */
+			Method(_BBN, 0) { /* Bus number = 0 */
+				Return(0)
+			}
+			Method(_STA, 0) {
+				/* DBGO("\\_SB\\PCI0\\_STA\n") */
+				Return(0x0B)     /* Status is visible */
+			}
+
+			Method(_PRT,0) {
+				If(PMOD){ Return(APR0) }   /* APIC mode */
+				Return (PR0)                  /* PIC Mode */
+			} /* end _PRT */
+
+			/* Describe the Northbridge devices */
+			Device(AMRT) {
+				Name(_ADR, 0x00000000)
+			} /* end AMRT */
+
+			/* The internal GFX bridge */
+			Device(AGPB) {
+				Name(_ADR, 0x00010000)
+				Name(_PRW, Package() {0x18, 4})
+				Method(_PRT,0) {
+					Return (APR1)
+				}
+			}  /* end AGPB */
+
+			/* The external GFX bridge */
+			Device(PBR2) {
+				Name(_ADR, 0x00020000)
+				Name(_PRW, Package() {0x18, 4})
+				Method(_PRT,0) {
+					If(PMOD){ Return(APS2) }   /* APIC mode */
+					Return (PS2)                  /* PIC Mode */
+				} /* end _PRT */
+			} /* end PBR2 */
+
+			/* Dev3 is also an external GFX bridge, not used in Herring */
+
+			Device(PBR4) {
+				Name(_ADR, 0x00040000)
+				Name(_PRW, Package() {0x18, 4})
+				Method(_PRT,0) {
+					If(PMOD){ Return(APS4) }   /* APIC mode */
+					Return (PS4)                  /* PIC Mode */
+				} /* end _PRT */
+			} /* end PBR4 */
+
+			Device(PBR5) {
+				Name(_ADR, 0x00050000)
+				Name(_PRW, Package() {0x18, 4})
+				Method(_PRT,0) {
+					If(PMOD){ Return(APS5) }   /* APIC mode */
+					Return (PS5)                  /* PIC Mode */
+				} /* end _PRT */
+			} /* end PBR5 */
+
+			Device(PBR6) {
+				Name(_ADR, 0x00060000)
+				Name(_PRW, Package() {0x18, 4})
+				Method(_PRT,0) {
+					If(PMOD){ Return(APS6) }   /* APIC mode */
+					Return (PS6)                  /* PIC Mode */
+				} /* end _PRT */
+			} /* end PBR6 */
+
+			/* The onboard EtherNet chip */
+			Device(PBR7) {
+				Name(_ADR, 0x00070000)
+				Name(_PRW, Package() {0x18, 4})
+				Method(_PRT,0) {
+					If(PMOD){ Return(APS7) }   /* APIC mode */
+					Return (PS7)                  /* PIC Mode */
+				} /* end _PRT */
+			} /* end PBR7 */
+
+			/* GPP */
+			Device(PBR9) {
+				Name(_ADR, 0x00090000)
+				Name(_PRW, Package() {0x18, 4})
+				Method(_PRT,0) {
+					If(PMOD){ Return(APS9) }   /* APIC mode */
+					Return (PS9)                  /* PIC Mode */
+				} /* end _PRT */
+			} /* end PBR9 */
+
+			Device(PBRa) {
+				Name(_ADR, 0x000A0000)
+				Name(_PRW, Package() {0x18, 4})
+				Method(_PRT,0) {
+					If(PMOD){ Return(APSa) }   /* APIC mode */
+					Return (PSa)                  /* PIC Mode */
+				} /* end _PRT */
+			} /* end PBRa */
+
+
+			/* PCI slot 1, 2, 3 */
+			Device(PIBR) {
+				Name(_ADR, 0x00140004)
+				Name(_PRW, Package() {0x18, 4})
+
+				Method(_PRT, 0) {
+					Return (PCIB)
+				}
+			}
+
+			/* Describe the Southbridge devices */
+			Device(STCR) {
+				Name(_ADR, 0x00110000)
+				#include "acpi/sata.asl"
+			} /* end STCR */
+
+			Device(UOH1) {
+				Name(_ADR, 0x00130000)
+				Name(_PRW, Package() {0x0B, 3})
+			} /* end UOH1 */
+
+			Device(UOH2) {
+				Name(_ADR, 0x00130001)
+				Name(_PRW, Package() {0x0B, 3})
+			} /* end UOH2 */
+
+			Device(UOH3) {
+				Name(_ADR, 0x00130002)
+				Name(_PRW, Package() {0x0B, 3})
+			} /* end UOH3 */
+
+			Device(UOH4) {
+				Name(_ADR, 0x00130003)
+				Name(_PRW, Package() {0x0B, 3})
+			} /* end UOH4 */
+
+			Device(UOH5) {
+				Name(_ADR, 0x00130004)
+				Name(_PRW, Package() {0x0B, 3})
+			} /* end UOH5 */
+
+			Device(UEH1) {
+				Name(_ADR, 0x00130005)
+				Name(_PRW, Package() {0x0B, 3})
+			} /* end UEH1 */
+
+			Device(SBUS) {
+				Name(_ADR, 0x00140000)
+			} /* end SBUS */
+
+			/* Primary (and only) IDE channel */
+			Device(IDEC) {
+				Name(_ADR, 0x00140001)
+				#include "acpi/ide.asl"
+			} /* end IDEC */
+
+			Device(AZHD) {
+				Name(_ADR, 0x00140002)
+				OperationRegion(AZPD, PCI_Config, 0x00, 0x100)
+					Field(AZPD, AnyAcc, NoLock, Preserve) {
+					offset (0x42),
+					NSDI, 1,
+					NSDO, 1,
+					NSEN, 1,
+					offset (0x44),
+					IPCR, 4,
+					offset (0x54),
+					PWST, 2,
+					, 6,
+					PMEB, 1,
+					, 6,
+					PMST, 1,
+					offset (0x62),
+					MMCR, 1,
+					offset (0x64),
+					MMLA, 32,
+					offset (0x68),
+					MMHA, 32,
+					offset (0x6C),
+					MMDT, 16,
+				}
+
+				Method(_INI) {
+					If(LEqual(OSTP,3)){   /* If we are running Linux */
+						Store(zero, NSEN)
+						Store(one, NSDO)
+						Store(one, NSDI)
+					}
+				}
+			} /* end AZHD */
+
+			Device(LIBR) {
+				Name(_ADR, 0x00140003)
+				/* Method(_INI) {
+				*	DBGO("\\_SB\\PCI0\\LpcIsaBr\\_INI\n")
+				} */ /* End Method(_SB.SBRDG._INI) */
+
+				/* Real Time Clock Device */
+				Device(RTC0) {
+					Name(_HID, EISAID("PNP0B00"))	/* AT Real Time Clock (not PIIX4 compatible) */
+					Name(_CRS, ResourceTemplate() {
+						IRQNoFlags(){8}
+						IO(Decode16,0x0070, 0x0070, 0, 2)
+						/* IO(Decode16,0x0070, 0x0070, 0, 4) */
+					})
+				} /* End Device(_SB.PCI0.LpcIsaBr.RTC0) */
+
+				Device(TMR) {	/* Timer */
+					Name(_HID,EISAID("PNP0100"))	/* System Timer */
+					Name(_CRS, ResourceTemplate() {
+						IRQNoFlags(){0}
+						IO(Decode16, 0x0040, 0x0040, 0, 4)
+						/* IO(Decode16, 0x0048, 0x0048, 0, 4) */
+					})
+				} /* End Device(_SB.PCI0.LpcIsaBr.TMR) */
+
+				Device(SPKR) {	/* Speaker */
+					Name(_HID,EISAID("PNP0800"))	/* AT style speaker */
+					Name(_CRS, ResourceTemplate() {
+						IO(Decode16, 0x0061, 0x0061, 0, 1)
+					})
+				} /* End Device(_SB.PCI0.LpcIsaBr.SPKR) */
+
+				Device(PIC) {
+					Name(_HID,EISAID("PNP0000"))	/* AT Interrupt Controller */
+					Name(_CRS, ResourceTemplate() {
+						IRQNoFlags(){2}
+						IO(Decode16,0x0020, 0x0020, 0, 2)
+						IO(Decode16,0x00A0, 0x00A0, 0, 2)
+						/* IO(Decode16, 0x00D0, 0x00D0, 0x10, 0x02) */
+						/* IO(Decode16, 0x04D0, 0x04D0, 0x10, 0x02) */
+					})
+				} /* End Device(_SB.PCI0.LpcIsaBr.PIC) */
+
+				Device(MAD) { /* 8257 DMA */
+					Name(_HID,EISAID("PNP0200"))	/* Hardware Device ID */
+					Name(_CRS, ResourceTemplate() {
+						DMA(Compatibility,BusMaster,Transfer8){4}
+						IO(Decode16, 0x0000, 0x0000, 0x10, 0x10)
+						IO(Decode16, 0x0081, 0x0081, 0x01, 0x03)
+						IO(Decode16, 0x0087, 0x0087, 0x01, 0x01)
+						IO(Decode16, 0x0089, 0x0089, 0x01, 0x03)
+						IO(Decode16, 0x008F, 0x008F, 0x01, 0x01)
+						IO(Decode16, 0x00C0, 0x00C0, 0x10, 0x20)
+					}) /* End Name(_SB.PCI0.LpcIsaBr.MAD._CRS) */
+				} /* End Device(_SB.PCI0.LpcIsaBr.MAD) */
+
+				Device(COPR) {
+					Name(_HID,EISAID("PNP0C04"))	/* Math Coprocessor */
+					Name(_CRS, ResourceTemplate() {
+						IO(Decode16, 0x00F0, 0x00F0, 0, 0x10)
+						IRQNoFlags(){13}
+					})
+				} /* End Device(_SB.PCI0.LpcIsaBr.COPR) */
+
+				Device(HPTM) {
+					Name(_HID,EISAID("PNP0103"))
+					Name(CRS,ResourceTemplate()	{
+						Memory32Fixed(ReadOnly,0xFED00000, 0x00000400, HPT)	/* 1kb reserved space */
+					})
+					Method(_STA, 0) {
+						Return(0x0F) /* sata is visible */
+					}
+					Method(_CRS, 0)	{
+						CreateDwordField(CRS, ^HPT._BAS, HPBA)
+						Store(HPBA, HPBA)
+						Return(CRS)
+					}
+				} /* End Device(_SB.PCI0.LpcIsaBr.COPR) */
+			} /* end LIBR */
+
+			Device(HPBR) {
+				Name(_ADR, 0x00140004)
+			} /* end HostPciBr */
+
+			Device(ACAD) {
+				Name(_ADR, 0x00140005)
+			} /* end Ac97audio */
+
+			Device(ACMD) {
+				Name(_ADR, 0x00140006)
+			} /* end Ac97modem */
+
+			/* ITE8718 Support */
+			OperationRegion (IOID, SystemIO, 0x2E, 0x02)	/* sometimes it is 0x4E */
+				Field (IOID, ByteAcc, NoLock, Preserve)
+				{
+					SIOI,   8,    SIOD,   8		/* 0x2E and 0x2F */
+				}
+
+			IndexField (SIOI, SIOD, ByteAcc, NoLock, Preserve)
+			{
+					Offset (0x07),
+				LDN,	8,	/* Logical Device Number */
+					Offset (0x20),
+				CID1,	8,	/* Chip ID Byte 1, 0x87 */
+				CID2,	8,	/* Chip ID Byte 2, 0x12 */
+					Offset (0x30),
+				ACTR,	8,	/* Function activate */
+					Offset (0xF0),
+				APC0,	8,	/* APC/PME Event Enable Register */
+				APC1,	8,	/* APC/PME Status Register */
+				APC2,	8,	/* APC/PME Control Register 1 */
+				APC3,	8,	/* Environment Controller Special Configuration Register */
+				APC4,	8	/* APC/PME Control Register 2 */
+			}
+
+			/* Enter the 8718 MB PnP Mode */
+			Method (EPNP)
+			{
+				Store(0x87, SIOI)
+				Store(0x01, SIOI)
+				Store(0x55, SIOI)
+				Store(0x55, SIOI) /* 8718 magic number */
+			}
+			/* Exit the 8718 MB PnP Mode */
+			Method (XPNP)
+			{
+				Store (0x02, SIOI)
+				Store (0x02, SIOD)
+			}
+			/*
+			 * Keyboard PME is routed to SB700 Gevent3. We can wake
+			 * up the system by pressing the key.
+			 */
+			Method (SIOS, 1)
+			{
+				/* We only enable KBD PME for S5. */
+				If (LLess (Arg0, 0x05))
+				{
+					EPNP()
+					/* DBGO("8718F\n") */
+
+					Store (0x4, LDN)
+					Store (One, ACTR)  /* Enable EC */
+					/*
+					Store (0x4, LDN)
+					Store (0x04, APC4)
+					*/  /* falling edge. which mode? Not sure. */
+
+					Store (0x4, LDN)
+					Store (0x08, APC1) /* clear PME status, Use 0x18 for mouse & KBD */
+					Store (0x4, LDN)
+					Store (0x08, APC0) /* enable PME, Use 0x18 for mouse & KBD */
+
+					XPNP()
+				}
+			}
+			Method (SIOW, 1)
+			{
+				EPNP()
+				Store (0x4, LDN)
+				Store (Zero, APC0) /* disable keyboard PME */
+				Store (0x4, LDN)
+				Store (0xFF, APC1) /* clear keyboard PME status */
+				XPNP()
+			}
+
+			Name(CRES, ResourceTemplate() {
+				IO(Decode16, 0x0CF8, 0x0CF8, 1,	8)
+
+				WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
+					0x0000,			/* address granularity */
+					0x0000,			/* range minimum */
+					0x0CF7,			/* range maximum */
+					0x0000,			/* translation */
+					0x0CF8			/* length */
+				)
+
+				WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
+					0x0000,			/* address granularity */
+					0x0D00,			/* range minimum */
+					0xFFFF,			/* range maximum */
+					0x0000,			/* translation */
+					0xF300			/* length */
+				)
+
+				Memory32Fixed(READWRITE, 0, 0xA0000, BSMM)
+				Memory32Fixed(READONLY, 0x000A0000, 0x00020000, VGAM) 	/* VGA memory space */
+				Memory32Fixed(READONLY, 0x000C0000, 0x00020000, EMM1)	/* Assume C0000-E0000 empty */
+				Memory32Fixed(READONLY, 0x000E0000, 0x00020000, RDBS)   /* BIOS ROM area */
+
+				/* DRAM Memory from 1MB to TopMem */
+				Memory32Fixed(READWRITE, 0x00100000, 0, DMLO)	/* 1MB to TopMem */
+
+				/* BIOS space just below 4GB */
+				DWORDMemory(
+					ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite,
+					0x00,			/* Granularity */
+					0x00000000,		/* Min */
+					0x00000000,		/* Max */
+					0x00000000,		/* Translation */
+					0x00000001,		/* Max-Min, RLEN */
+					,,
+					PCBM
+				)
+
+				/* DRAM memory from 4GB to TopMem2 */
+				QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite,
+					0x00000000,		/* Granularity */
+					0x00000000,		/* Min */
+					0x00000000,		/* Max */
+					0x00000000,		/* Translation */
+					0x00000001,		/* Max-Min, RLEN */
+					,,
+					DMHI
+				)
+
+				/* BIOS space just below 16EB */
+				QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite,
+					0x00000000,		/* Granularity */
+					0x00000000,		/* Min */
+					0x00000000,		/* Max */
+					0x00000000,		/* Translation */
+					0x00000001,		/* Max-Min, RLEN */
+					,,
+					PEBM
+				)
+
+			}) /* End Name(_SB.PCI0.CRES) */
+
+			Method(_CRS, 0) {
+				/* DBGO("\\_SB\\PCI0\\_CRS\n") */
+
+				CreateDWordField(CRES, ^EMM1._BAS, EM1B)
+				CreateDWordField(CRES, ^EMM1._LEN, EM1L)
+				CreateDWordField(CRES, ^DMLO._BAS, DMLB)
+				CreateDWordField(CRES, ^DMLO._LEN, DMLL)
+				CreateDWordField(CRES, ^PCBM._MIN, PBMB)
+				CreateDWordField(CRES, ^PCBM._LEN, PBML)
+
+				CreateQWordField(CRES, ^DMHI._MIN, DMHB)
+				CreateQWordField(CRES, ^DMHI._LEN, DMHL)
+				CreateQWordField(CRES, ^PEBM._MIN, EBMB)
+				CreateQWordField(CRES, ^PEBM._LEN, EBML)
+
+				If(LGreater(LOMH, 0xC0000)){
+					Store(0xC0000, EM1B)	/* Hole above C0000 and below E0000 */
+					Subtract(LOMH, 0xC0000, EM1L)	/* subtract start, assumes allocation from C0000 going up */
+				}
+
+				/* Set size of memory from 1MB to TopMem */
+				Subtract(TOM1, 0x100000, DMLL)
+
+				/*
+				* If(LNotEqual(TOM2, 0x00000000)){
+				*	Store(0x100000000,DMHB)			DRAM from 4GB to TopMem2
+				*	ShiftLeft(TOM2, 20, Local0)
+				*	Subtract(Local0, 0x100000000, DMHL)
+				* }
+				*/
+
+				/* If there is no memory above 4GB, put the BIOS just below 4GB */
+				If(LEqual(TOM2, 0x00000000)){
+					Store(PBAD,PBMB)			/* Reserve the "BIOS" space */
+					Store(PBLN,PBML)
+				}
+				Else {  /* Otherwise, put the BIOS just below 16EB */
+					ShiftLeft(PBAD,16,EBMB)		/* Reserve the "BIOS" space */
+					Store(PBLN,EBML)
+				}
+
+				Return(CRES) /* note to change the Name buffer */
+			}  /* end of Method(_SB.PCI0._CRS) */
+
+			/*
+			*
+			*               FIRST METHOD CALLED UPON BOOT
+			*
+			*  1. If debugging, print current OS and ACPI interpreter.
+			*  2. Get PCI Interrupt routing from ACPI VSM, this
+			*     value is based on user choice in BIOS setup.
+			*/
+			Method(_INI, 0) {
+				/* DBGO("\\_SB\\_INI\n") */
+				/* DBGO("   DSDT.ASL code from ") */
+				/* DBGO(__DATE__) */
+				/* DBGO(" ") */
+				/* DBGO(__TIME__) */
+				/* DBGO("\n   Sleep states supported: ") */
+				/* DBGO("\n") */
+				/* DBGO("   \\_OS=") */
+				/* DBGO(\_OS) */
+				/* DBGO("\n   \\_REV=") */
+				/* DBGO(\_REV) */
+				/* DBGO("\n") */
+
+				/* Determine the OS we're running on */
+				CkOT()
+
+				/* On older chips, clear PciExpWakeDisEn */
+				/*if (LLessEqual(\SBRI, 0x13)) {
+				*    	Store(0,\PWDE)
+				* }
+				*/
+			} /* End Method(_SB._INI) */
+		} /* End Device(PCI0)  */
+
+		Device(PWRB) {	/* Start Power button device */
+			Name(_HID, EISAID("PNP0C0C"))
+			Name(_UID, 0xAA)
+			Name(_PRW, Package () {3, 0x04})	/* wake from S1-S4 */
+			Name(_STA, 0x0B) /* sata is invisible */
+		}
+	} /* End \_SB scope */
+
+	Scope(\_SI) {
+		Method(_SST, 1) {
+			/* DBGO("\\_SI\\_SST\n") */
+			/* DBGO("   New Indicator state: ") */
+			/* DBGO(Arg0) */
+			/* DBGO("\n") */
+		}
+	} /* End Scope SI */
+
+	/* SMBUS Support */
+	Mutex (SBX0, 0x00)
+	OperationRegion (SMB0, SystemIO, 0xB00, 0x0C)
+		Field (SMB0, ByteAcc, NoLock, Preserve) {
+			HSTS,   8, /* SMBUS status */
+			SSTS,   8,  /* SMBUS slave status */
+			HCNT,   8,  /* SMBUS control */
+			HCMD,   8,  /* SMBUS host cmd */
+			HADD,   8,  /* SMBUS address */
+			DAT0,   8,  /* SMBUS data0 */
+			DAT1,   8,  /* SMBUS data1 */
+			BLKD,   8,  /* SMBUS block data */
+			SCNT,   8,  /* SMBUS slave control */
+			SCMD,   8,  /* SMBUS shaow cmd */
+			SEVT,   8,  /* SMBUS slave event */
+			SDAT,   8  /* SMBUS slave data */
+	}
+
+	Method (WCLR, 0, NotSerialized) { /* clear SMBUS status register */
+		Store (0x1E, HSTS)
+		Store (0xFA, Local0)
+		While (LAnd (LNotEqual (And (HSTS, 0x1E), Zero), LGreater (Local0, Zero))) {
+			Stall (0x64)
+			Decrement (Local0)
+		}
+
+		Return (Local0)
+	}
+
+	Method (SWTC, 1, NotSerialized) {
+		Store (Arg0, Local0)
+		Store (0x07, Local2)
+		Store (One, Local1)
+		While (LEqual (Local1, One)) {
+			Store (And (HSTS, 0x1E), Local3)
+			If (LNotEqual (Local3, Zero)) { /* read sucess */
+				If (LEqual (Local3, 0x02)) {
+					Store (Zero, Local2)
+				}
+
+				Store (Zero, Local1)
+			}
+			Else {
+				If (LLess (Local0, 0x0A)) { /* read failure */
+					Store (0x10, Local2)
+					Store (Zero, Local1)
+				}
+				Else {
+					Sleep (0x0A) /* 10 ms, try again */
+					Subtract (Local0, 0x0A, Local0)
+				}
+			}
+		}
+
+		Return (Local2)
+	}
+
+	Method (SMBR, 3, NotSerialized) {
+		Store (0x07, Local0)
+		If (LEqual (Acquire (SBX0, 0xFFFF), Zero)) {
+			Store (WCLR (), Local0) /* clear SMBUS status register before read data */
+			If (LEqual (Local0, Zero)) {
+				Release (SBX0)
+				Return (0x0)
+			}
+
+			Store (0x1F, HSTS)
+			Store (Or (ShiftLeft (Arg1, One), One), HADD)
+			Store (Arg2, HCMD)
+			If (LEqual (Arg0, 0x07)) {
+				Store (0x48, HCNT) /* read byte */
+			}
+
+			Store (SWTC (0x03E8), Local1) /* 1000 ms */
+			If (LEqual (Local1, Zero)) {
+				If (LEqual (Arg0, 0x07)) {
+					Store (DAT0, Local0)
+				}
+			}
+			Else {
+				Store (Local1, Local0)
+			}
+
+			Release (SBX0)
+		}
+
+		/* DBGO("the value of SMBusData0 register ") */
+		/* DBGO(Arg2) */
+		/* DBGO(" is ") */
+		/* DBGO(Local0) */
+		/* DBGO("\n") */
+
+		Return (Local0)
+	}
+
+	/* THERMAL */
+	Scope(\_TZ) {
+		Name (KELV, 2732)
+		Name (THOT, 800)
+		Name (TCRT, 850)
+
+		ThermalZone(TZ00) {
+			Method(_AC0,0) {	/* Active Cooling 0 (0=highest fan speed) */
+				/* DBGO("\\_TZ\\TZ00\\_AC0\n") */
+				Return(Add(0, 2730))
+			}
+			Method(_AL0,0) {	/* Returns package of cooling device to turn on */
+				/* DBGO("\\_TZ\\TZ00\\_AL0\n") */
+				Return(Package() {\_TZ.TZ00.FAN0})
+			}
+			Device (FAN0) {
+				Name(_HID, EISAID("PNP0C0B"))
+				Name(_PR0, Package() {PFN0})
+			}
+
+			PowerResource(PFN0,0,0) {
+				Method(_STA) {
+					Store(0xF,Local0)
+					Return(Local0)
+				}
+				Method(_ON) {
+					/* DBGO("\\_TZ\\TZ00\\FAN0 _ON\n") */
+				}
+				Method(_OFF) {
+					/* DBGO("\\_TZ\\TZ00\\FAN0 _OFF\n") */
+				}
+			}
+
+			Method(_HOT,0) {	/* return hot temp in tenths degree Kelvin */
+				/* DBGO("\\_TZ\\TZ00\\_HOT\n") */
+				Return (Add (THOT, KELV))
+			}
+			Method(_CRT,0) {	/* return critical temp in tenths degree Kelvin */
+				/* DBGO("\\_TZ\\TZ00\\_CRT\n") */
+				Return (Add (TCRT, KELV))
+			}
+			Method(_TMP,0) {	/* return current temp of this zone */
+				Store (SMBR (0x07, 0x4C,, 0x00), Local0)
+				If (LGreater (Local0, 0x10)) {
+					Store (Local0, Local1)
+				}
+				Else {
+					Add (Local0, THOT, Local0)
+					Return (Add (400, KELV))
+				}
+
+				Store (SMBR (0x07, 0x4C, 0x01), Local0)
+				/* only the two MSBs in the external temperature low byte are used, resolution 0.25. We ignore it */
+				/* Store (SMBR (0x07, 0x4C, 0x10), Local2) */
+				If (LGreater (Local0, 0x10)) {
+					If (LGreater (Local0, Local1)) {
+						Store (Local0, Local1)
+					}
+
+					Multiply (Local1, 10, Local1)
+					Return (Add (Local1, KELV))
+				}
+				Else {
+					Add (Local0, THOT, Local0)
+					Return (Add (400 , KELV))
+				}
+			} /* end of _TMP */
+		} /* end of TZ00 */
+	}
+}
+/* End of ASL file */