diff options
| author | Edward O'Callaghan <eocallaghan@alterapraxis.com> | 2014-04-27 00:41:50 +1000 |
|---|---|---|
| committer | Rudolf Marek <r.marek@assembler.cz> | 2014-05-11 17:52:08 +0200 |
| commit | f29200240e428761827ab8d179fa23068bfa9d59 (patch) | |
| tree | e8f20cf76e224a08152c46196894479bd6105436 /src/mainboard/asus/m2v | |
| parent | 946bee1c349db6bf88b4f6736dc910eb4890a74b (diff) | |
superio/ite/*: Factor out generic romstage component
Following the reasoning of:
cf7b498 superio/fintek/*: Factor out generic romstage component
Change-Id: I4c0a9a5a7786eb8fcb0c3ed6251c7fe9bbbadae7
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5585
Tested-by: build bot (Jenkins)
Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
Diffstat (limited to 'src/mainboard/asus/m2v')
| -rw-r--r-- | src/mainboard/asus/m2v/romstage.c | 12 |
1 files changed, 6 insertions, 6 deletions
diff --git a/src/mainboard/asus/m2v/romstage.c b/src/mainboard/asus/m2v/romstage.c index 1ca145d704..acf8f9166e 100644 --- a/src/mainboard/asus/m2v/romstage.c +++ b/src/mainboard/asus/m2v/romstage.c @@ -38,7 +38,8 @@ unsigned int get_sbdn(unsigned bus); #include "lib/delay.c" #include "northbridge/amd/amdk8/reset_test.c" #include "northbridge/amd/amdk8/debug.c" -#include "superio/ite/it8712f/early_serial.c" +#include <superio/ite/common/ite.h> +#include <superio/ite/it8712f/it8712f.h> #include "southbridge/via/vt8237r/early_smbus.c" #include "cpu/x86/bist.h" #include "northbridge/amd/amdk8/setup_resource_map.c" @@ -46,6 +47,7 @@ unsigned int get_sbdn(unsigned bus); #define SERIAL_DEV PNP_DEV(0x2e, IT8712F_SP1) #define WATCHDOG_DEV PNP_DEV(0x2e, IT8712F_GPIO) +#define CLKIN_DEV PNP_DEV(0x2e, IT8712F_GPIO) #define IT8712F_GPIO_BASE 0x0a20 @@ -163,15 +165,13 @@ static void m2v_it8712f_gpio_init(void) * 0xc0=0x17, 0xc8=0x17 gpio port 1 select & output enable * 0xc4=0xc1, 0xcc=0xc1 gpio port 5 select & output enable */ - it8712f_enter_conf(); giv = gpio_init_data; while (giv->addr) { printk(BIOS_SPEW, "it8712f gpio: %02x=%02x\n", giv->addr, giv->val); - it8712f_sio_write(IT8712F_GPIO, giv->addr, giv->val); + ite_reg_write(IT8712F_GPIO, giv->addr, giv->val); giv++; } - it8712f_exit_conf(); printk(BIOS_INFO, "it8712f gpio: Setting DDR2 voltage to 1.80V\n"); /* @@ -225,8 +225,8 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) int needs_reset = 0; struct sys_info *sysinfo = &sysinfo_car; - it8712f_24mhz_clkin(); - it8712f_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + ite_conf_clkin(CLKIN_DEV, ITE_UART_CLK_PREDIVIDE_24); + ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); it8712f_kill_watchdog(); console_init(); enable_rom_decode(); |