ASUS F2A85-M: Split DSDT into common sections (as per Parmer)

Rearranged the F2A85-M DSDT file to match the functionality found
on Parmer.  As with the Parmer implementation, the F2A85-M dsdt.asl
file in the mainboard directory contains only #include references to
the appropriate files.

As with Parmer, some include files have no content but are left as a
template for other platforms and as placeholders for completing the
ACPI implementation for F2A85-M.

Change-Id: Ic72cb6004538ca9d9f79826b9b3c8d6aeb25017c
Signed-off-by: Kimarie Hoot <kimarie.hoot@se-eng.com>
Reviewed-on: http://review.coreboot.org/3805
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martin@se-eng.com>

1 files changed, 51 insertions, 1399 deletions

diff --git a/src/mainboard/asus/f2a85-m/dsdt.asl b/src/mainboard/asus/f2a85-m/dsdt.asl
index 674f616cf6..bb9c0fe154 100644
--- a/src/mainboard/asus/f2a85-m/dsdt.asl
+++ b/src/mainboard/asus/f2a85-m/dsdt.asl
@@ -2,6 +2,7 @@
  * This file is part of the coreboot project.
  *
  * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * Copyright (C) 2013 Sage Electronic Engineering, LLC
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -19,1436 +20,87 @@
 
 /* DefinitionBlock Statement */
 DefinitionBlock (
-	"DSDT.AML",           /* Output filename */
-	"DSDT",                 /* Signature */
-	0x02,		/* DSDT Revision, needs to be 2 for 64bit */
-	"ASUS  ",               /* OEMID */
-	"COREBOOT",	     /* TABLE ID */
-	0x00010001	/* OEM Revision */
+	"DSDT.AML",		/* Output filename */
+	"DSDT",			/* Signature */
+	0x02,			/* DSDT Revision, needs to be 2 for 64bit */
+	"ASUS  ",		/* OEMID */
+	"COREBOOT",		/* TABLE ID */
+	0x00010001		/* OEM Revision */
 	)
 {	/* Start of ASL file */
-	/* #include "../../../arch/x86/acpi/debug.asl" */		/* Include global debug methods if needed */
+	/* #include <arch/x86/acpi/debug.asl> */	/* Include global debug methods if needed */
 
-	/* Data to be patched by the BIOS during POST */
-	/* FIXME the patching is not done yet! */
-	/* Memory related values */
-	Name(LOMH, 0x0)	/* Start of unused memory in C0000-E0000 range */
-	Name(PBAD, 0x0)	/* Address of BIOS area (If TOM2 != 0, Addr >> 16) */
-	Name(PBLN, 0x0)	/* Length of BIOS area */
+	/* Globals for the platform */
+	#include "acpi/mainboard.asl"
 
-	Name(PCBA, CONFIG_MMCONF_BASE_ADDRESS)	/* Base address of PCIe config space */
-	Name(PCLN, Multiply(0x100000, CONFIG_MMCONF_BUS_NUMBER)) /* Length of PCIe config space, 1MB each bus */
-	Name(HPBA, 0xFED00000)	/* Base address of HPET table */
+	/* Describe the USB Overcurrent pins */
+	#include "acpi/usb_oc.asl"
 
-	Name(SSFG, 0x0D)		/* S1 support: bit 0, S2 Support: bit 1, etc. S0 & S5 assumed */
+	/* PCI IRQ mapping for the Southbridge */
+	#include <southbridge/amd/agesa/hudson/acpi/pcie.asl>
 
-	/* USB overcurrent mapping pins.   */
-	Name(UOM0, 0)
-	Name(UOM1, 2)
-	Name(UOM2, 0)
-	Name(UOM3, 7)
-	Name(UOM4, 2)
-	Name(UOM5, 2)
-	Name(UOM6, 6)
-	Name(UOM7, 2)
-	Name(UOM8, 6)
-	Name(UOM9, 6)
+	/* Describe the processor tree (\_PR) */
+	#include <cpu/amd/agesa/family15tn/acpi/cpu.asl>
 
-	/* Some global data */
-	Name(OSTP, 3)		/* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */
-	Name(OSV, Ones)	/* Assume nothing */
-	Name(PMOD, One)	/* Assume APIC */
+	/* Describe the supported Sleep States for this Southbridge */
+	#include <southbridge/amd/agesa/hudson/acpi/sleepstates.asl>
 
-	/*
-	 * Processor Object
-	 *
-	 */
-	Scope (\_PR) {		/* define processor scope */
-		Processor(
-			P000,		/* name space name */
-			0,		/* Unique number for this processor */
-			0x810,		/* PBLK system I/O address !hardcoded! */
-			0x06		/* PBLKLEN for boot processor */
-			) {
-		}
-
-		Processor(
-			P001,		/* name space name */
-			1,		/* Unique number for this processor */
-			0x0810,		/* PBLK system I/O address !hardcoded! */
-			0x06		/* PBLKLEN for boot processor */
-			) {
-		}
-		Processor(
-			P002,		/* name space name */
-			2,		/* Unique number for this processor */
-			0x0810,		/* PBLK system I/O address !hardcoded! */
-			0x06		/* PBLKLEN for boot processor */
-			) {
-		}
-		Processor(
-			P003,		/* name space name */
-			3,		/* Unique number for this processor */
-			0x0810,		/* PBLK system I/O address !hardcoded! */
-			0x06		/* PBLKLEN for boot processor */
-			) {
-		}
-		Processor(
-			P004,		/* name space name */
-			4,		/* Unique number for this processor */
-			0x0810,		/* PBLK system I/O address !hardcoded! */
-			0x06		/* PBLKLEN for boot processor */
-			) {
-		}
-		Processor(
-			P005,		/* name space name */
-			5,		/* Unique number for this processor */
-			0x0810,		/* PBLK system I/O address !hardcoded! */
-			0x06		/* PBLKLEN for boot processor */
-			) {
-		}
-		Processor(
-			P006,		/* name space name */
-			6,		/* Unique number for this processor */
-			0x0810,		/* PBLK system I/O address !hardcoded! */
-			0x06		/* PBLKLEN for boot processor */
-			) {
-		}
-		Processor(
-			P007,		/* name space name */
-			7,		/* Unique number for this processor */
-			0x0810,		/* PBLK system I/O address !hardcoded! */
-			0x06		/* PBLKLEN for boot processor */
-			) {
-		}
-	} /* End _PR scope */
-
-	/* PIC IRQ mapping registers, C00h-C01h. */
-	OperationRegion(PRQM, SystemIO, 0x00000C00, 0x00000002)
-		Field(PRQM, ByteAcc, NoLock, Preserve) {
-		PRQI, 0x00000008,
-		PRQD, 0x00000008,  /* Offset: 1h */
-	}
-	IndexField(PRQI, PRQD, ByteAcc, NoLock, Preserve) {
-		PIRA, 0x00000008,	/* Index 0 */
-		PIRB, 0x00000008,	/* Index 1 */
-		PIRC, 0x00000008,	/* Index 2 */
-		PIRD, 0x00000008,	/* Index 3 */
-		PIRE, 0x00000008,	/* Index 4 */
-		PIRF, 0x00000008,	/* Index 5 */
-		PIRG, 0x00000008,	/* Index 6 */
-		PIRH, 0x00000008,	/* Index 7 */
-	}
-
-	/* PCI Error control register */
-	OperationRegion(PERC, SystemIO, 0x00000C14, 0x00000001)
-		Field(PERC, ByteAcc, NoLock, Preserve) {
-		SENS, 0x00000001,
-		PENS, 0x00000001,
-		SENE, 0x00000001,
-		PENE, 0x00000001,
-	}
-
-	/* Client Management index/data registers */
-	OperationRegion(CMT, SystemIO, 0x00000C50, 0x00000002)
-		Field(CMT, ByteAcc, NoLock, Preserve) {
-		CMTI,      8,
-		/* Client Management Data register */
-		G64E,   1,
-		G64O,      1,
-		G32O,      2,
-		,       2,
-		GPSL,     2,
-	}
-
-	/* GPM Port register */
-	OperationRegion(GPT, SystemIO, 0x00000C52, 0x00000001)
-		Field(GPT, ByteAcc, NoLock, Preserve) {
-		GPB0,1,
-		GPB1,1,
-		GPB2,1,
-		GPB3,1,
-		GPB4,1,
-		GPB5,1,
-		GPB6,1,
-		GPB7,1,
-	}
-
-	/* Flash ROM program enable register */
-	OperationRegion(FRE, SystemIO, 0x00000C6F, 0x00000001)
-		Field(FRE, ByteAcc, NoLock, Preserve) {
-		,     0x00000006,
-		FLRE, 0x00000001,
-	}
-
-	/* PM2 index/data registers */
-	OperationRegion(PM2R, SystemIO, 0x00000CD0, 0x00000002)
-		Field(PM2R, ByteAcc, NoLock, Preserve) {
-		PM2I, 0x00000008,
-		PM2D, 0x00000008,
-	}
-
-	/* Power Management I/O registers. */
-	OperationRegion(PIOR, SystemIO, 0x00000CD6, 0x00000002)
-		Field(PIOR, ByteAcc, NoLock, Preserve) {
-		PIOI, 0x00000008,
-		PIOD, 0x00000008,
-	}
-	IndexField (PIOI, PIOD, ByteAcc, NoLock, Preserve) {
-		Offset(0xEE),
-		UPWS, 3,
-	}
-
-	/* PM1 Event Block
-	* First word is PM1_Status, Second word is PM1_Enable
-	*/
-	Scope(\_SB) {
-		/* PCIe Configuration Space for CONFIG_MMCONF_BUS_NUMBER busses */
-		OperationRegion(PCFG, SystemMemory, PCBA, PCLN)
-			Field(PCFG, ByteAcc, NoLock, Preserve) {
-			/* Byte offsets are computed using the following technique:
-			 * ((bus number + 1) * ((device number * 8) * 4096)) + register offset
-			 * The 8 comes from 8 functions per device, and 4096 bytes per function config space
-			*/
-			Offset(0x00088024),	/* Byte offset to SATA register 24h - Bus 0, Device 17, Function 0 */
-			STB5, 32,
-			Offset(0x00098042),	/* Byte offset to OHCI0 register 42h - Bus 0, Device 19, Function 0 */
-			PT0D, 1,
-			PT1D, 1,
-			PT2D, 1,
-			PT3D, 1,
-			PT4D, 1,
-			PT5D, 1,
-			PT6D, 1,
-			PT7D, 1,
-			PT8D, 1,
-			PT9D, 1,
-			Offset(0x000A0004),	/* Byte offset to SMBUS	register 4h - Bus 0, Device 20, Function 0 */
-			SBIE, 1,
-			SBME, 1,
-			Offset(0x000A0008),	/* Byte offset to SMBUS	register 8h - Bus 0, Device 20, Function 0 */
-			SBRI, 8,
-			Offset(0x000A0014),	/* Byte offset to SMBUS	register 14h - Bus 0, Device 20, Function 0 */
-			SBB1, 32,
-			Offset(0x000A0078),	/* Byte offset to SMBUS	register 78h - Bus 0, Device 20, Function 0 */
-			,14,
-			P92E, 1,		/* Port92 decode enable */
-		}
-
-		OperationRegion(SB5, SystemMemory, STB5, 0x1000)
-			Field(SB5, AnyAcc, NoLock, Preserve){
-			/* Port 0 */
-			Offset(0x120),		/* Port 0 Task file status */
-			P0ER, 1,
-			, 2,
-			P0DQ, 1,
-			, 3,
-			P0BY, 1,
-			Offset(0x128),		/* Port 0 Serial ATA status */
-			P0DD, 4,
-			, 4,
-			P0IS, 4,
-			Offset(0x12C),		/* Port 0 Serial ATA control */
-			P0DI, 4,
-			Offset(0x130),		/* Port 0 Serial ATA error */
-			, 16,
-			P0PR, 1,
-
-			/* Port 1 */
-			offset(0x1A0),		/* Port 1 Task file status */
-			P1ER, 1,
-			, 2,
-			P1DQ, 1,
-			, 3,
-			P1BY, 1,
-			Offset(0x1A8),		/* Port 1 Serial ATA status */
-			P1DD, 4,
-			, 4,
-			P1IS, 4,
-			Offset(0x1AC),		/* Port 1 Serial ATA control */
-			P1DI, 4,
-			Offset(0x1B0),		/* Port 1 Serial ATA error */
-			, 16,
-			P1PR, 1,
-
-			/* Port 2 */
-			Offset(0x220),		/* Port 2 Task file status */
-			P2ER, 1,
-			, 2,
-			P2DQ, 1,
-			, 3,
-			P2BY, 1,
-			Offset(0x228),		/* Port 2 Serial ATA status */
-			P2DD, 4,
-			, 4,
-			P2IS, 4,
-			Offset(0x22C),		/* Port 2 Serial ATA control */
-			P2DI, 4,
-			Offset(0x230),		/* Port 2 Serial ATA error */
-			, 16,
-			P2PR, 1,
-
-			/* Port 3 */
-			Offset(0x2A0),		/* Port 3 Task file status */
-			P3ER, 1,
-			, 2,
-			P3DQ, 1,
-			, 3,
-			P3BY, 1,
-			Offset(0x2A8),		/* Port 3 Serial ATA status */
-			P3DD, 4,
-			, 4,
-			P3IS, 4,
-			Offset(0x2AC),		/* Port 3 Serial ATA control */
-			P3DI, 4,
-			Offset(0x2B0),		/* Port 3 Serial ATA error */
-			, 16,
-			P3PR, 1,
-		}
-	}
-
-	#include "acpi/routing.asl"
+	/* Describe the Sleep Methods (WAK, PTS, GTS, etc.) for this platform */
+	#include "acpi/sleep.asl"
 
 	Scope(\_SB) {
+		/* global utility methods expected within the \_SB scope */
+		#include <arch/x86/acpi/globutil.asl>
 
-		Method(CkOT, 0){
-
-			if(LNotEqual(OSTP, Ones)) {Return(OSTP)}	/* OS version was already detected */
-
-			if(CondRefOf(\_OSI,Local1))
-			{
-				Store(1, OSTP)                /* Assume some form of XP */
-				if (\_OSI("Windows 2006"))      /* Vista */
-				{
-					Store(2, OSTP)
-				}
-			} else {
-				If(WCMP(\_OS,"Linux")) {
-					Store(3, OSTP)            /* Linux */
-				} Else {
-					Store(4, OSTP)            /* Gotta be WinCE */
-				}
-			}
-			Return(OSTP)
-		}
-
-		Method(_PIC, 0x01, NotSerialized)
-		{
-			If (Arg0)
-			{
-				\_SB.CIRQ()
-			}
-			Store(Arg0, PMOD)
-		}
-		Method(CIRQ, 0x00, NotSerialized){
-			//Store(0, PIRA)
-			//Store(0, PIRB)
-			//Store(0, PIRC)
-			//Store(0, PIRD)
-			//Store(0, PIRE)
-			//Store(0, PIRF)
-			//Store(0, PIRG)
-			//Store(0, PIRH)
-		}
-
-		Name(IRQB, ResourceTemplate(){
-			IRQ(Level,ActiveLow,Shared){15}
-		})
-
-		Name(IRQP, ResourceTemplate(){
-			IRQ(Level,ActiveLow,Exclusive){3, 4, 5, 7, 10, 11, 12, 15}
-		})
-
-		Name(PITF, ResourceTemplate(){
-			IRQ(Level,ActiveLow,Exclusive){9}
-		})
-
-		Device(INTA) {
-			Name(_HID, EISAID("PNP0C0F"))
-			Name(_UID, 1)
-
-			Method(_STA, 0) {
-				if (PIRA) {
-					Return(0x0B) /* sata is invisible */
-				} else {
-					Return(0x09) /* sata is disabled */
-				}
-			} /* End Method(_SB.INTA._STA) */
-
-			Method(_DIS ,0) {
-				/* DBGO("\\_SB\\LNKA\\_DIS\n") */
-				//Store(0x1F, PIRA)
-			} /* End Method(_SB.INTA._DIS) */
-
-			Method(_PRS ,0) {
-				/* DBGO("\\_SB\\LNKA\\_PRS\n") */
-				Return(IRQP)
-			} /* Method(_SB.INTA._PRS) */
-
-			Method(_CRS ,0) {
-				/* DBGO("\\_SB\\LNKA\\_CRS\n") */
-				CreateWordField(IRQB, 0x1, IRQN)
-				ShiftLeft(1, PIRA, IRQN)
-				Return(IRQB)
-			} /* Method(_SB.INTA._CRS) */
-
-			Method(_SRS, 1) {
-				/* DBGO("\\_SB\\LNKA\\_CRS\n") */
-				CreateWordField(ARG0, 1, IRQM)
-
-				/* Use lowest available IRQ */
-				FindSetRightBit(IRQM, Local0)
-				if (Local0) {
-					Decrement(Local0)
-				}
-				//Store(Local0, PIRA)
-			} /* End Method(_SB.INTA._SRS) */
-		} /* End Device(INTA) */
-
-		Device(INTB) {
-			Name(_HID, EISAID("PNP0C0F"))
-			Name(_UID, 2)
-
-			Method(_STA, 0) {
-				if (PIRB) {
-					Return(0x0B) /* sata is invisible */
-				} else {
-					Return(0x09) /* sata is disabled */
-				}
-			} /* End Method(_SB.INTB._STA) */
-
-			Method(_DIS ,0) {
-				/* DBGO("\\_SB\\LNKB\\_DIS\n") */
-				//Store(0, PIRB)
-			} /* End Method(_SB.INTB._DIS) */
-
-			Method(_PRS ,0) {
-				/* DBGO("\\_SB\\LNKB\\_PRS\n") */
-				Return(IRQP)
-			} /* Method(_SB.INTB._PRS) */
-
-			Method(_CRS ,0) {
-				/* DBGO("\\_SB\\LNKB\\_CRS\n") */
-				CreateWordField(IRQB, 0x1, IRQN)
-				ShiftLeft(1, PIRB, IRQN)
-				Return(IRQB)
-			} /* Method(_SB.INTB._CRS) */
-
-			Method(_SRS, 1) {
-				/* DBGO("\\_SB\\LNKB\\_CRS\n") */
-				CreateWordField(ARG0, 1, IRQM)
-
-				/* Use lowest available IRQ */
-				FindSetRightBit(IRQM, Local0)
-				if (Local0) {
-					Decrement(Local0)
-				}
-				Store(Local0, PIRB)
-			} /* End Method(_SB.INTB._SRS) */
-		} /* End Device(INTB)  */
-
-		Device(INTC) {
-			Name(_HID, EISAID("PNP0C0F"))
-			Name(_UID, 3)
-
-			Method(_STA, 0) {
-				if (PIRC) {
-					Return(0x0B) /* sata is invisible */
-				} else {
-					Return(0x09) /* sata is disabled */
-				}
-			} /* End Method(_SB.INTC._STA) */
-
-			Method(_DIS ,0) {
-				/* DBGO("\\_SB\\LNKC\\_DIS\n") */
-				//Store(0, PIRC)
-			} /* End Method(_SB.INTC._DIS) */
-
-			Method(_PRS ,0) {
-				/* DBGO("\\_SB\\LNKC\\_PRS\n") */
-				Return(IRQP)
-			} /* Method(_SB.INTC._PRS) */
-
-			Method(_CRS ,0) {
-				/* DBGO("\\_SB\\LNKC\\_CRS\n") */
-				CreateWordField(IRQB, 0x1, IRQN)
-				ShiftLeft(1, PIRC, IRQN)
-				Return(IRQB)
-			} /* Method(_SB.INTC._CRS) */
-
-			Method(_SRS, 1) {
-				/* DBGO("\\_SB\\LNKC\\_CRS\n") */
-				CreateWordField(ARG0, 1, IRQM)
-
-				/* Use lowest available IRQ */
-				FindSetRightBit(IRQM, Local0)
-				if (Local0) {
-					Decrement(Local0)
-				}
-				Store(Local0, PIRC)
-			} /* End Method(_SB.INTC._SRS) */
-		} /* End Device(INTC)  */
-
-		Device(INTD) {
-			Name(_HID, EISAID("PNP0C0F"))
-			Name(_UID, 4)
-
-			Method(_STA, 0) {
-				if (PIRD) {
-					Return(0x0B) /* sata is invisible */
-				} else {
-					Return(0x09) /* sata is disabled */
-				}
-			} /* End Method(_SB.INTD._STA) */
-
-			Method(_DIS ,0) {
-				/* DBGO("\\_SB\\LNKD\\_DIS\n") */
-				//Store(0, PIRD)
-			} /* End Method(_SB.INTD._DIS) */
-
-			Method(_PRS ,0) {
-				/* DBGO("\\_SB\\LNKD\\_PRS\n") */
-				Return(IRQP)
-			} /* Method(_SB.INTD._PRS) */
-
-			Method(_CRS ,0) {
-				/* DBGO("\\_SB\\LNKD\\_CRS\n") */
-				CreateWordField(IRQB, 0x1, IRQN)
-				ShiftLeft(1, PIRD, IRQN)
-				Return(IRQB)
-			} /* Method(_SB.INTD._CRS) */
-
-			Method(_SRS, 1) {
-				/* DBGO("\\_SB\\LNKD\\_CRS\n") */
-				CreateWordField(ARG0, 1, IRQM)
-
-				/* Use lowest available IRQ */
-				FindSetRightBit(IRQM, Local0)
-				if (Local0) {
-					Decrement(Local0)
-				}
-				Store(Local0, PIRD)
-			} /* End Method(_SB.INTD._SRS) */
-		} /* End Device(INTD)  */
-
-		Device(INTE) {
-			Name(_HID, EISAID("PNP0C0F"))
-			Name(_UID, 5)
-
-			Method(_STA, 0) {
-				if (PIRE) {
-					Return(0x0B) /* sata is invisible */
-				} else {
-					Return(0x09) /* sata is disabled */
-				}
-			} /* End Method(_SB.INTE._STA) */
-
-			Method(_DIS ,0) {
-				/* DBGO("\\_SB\\LNKE\\_DIS\n") */
-				//Store(0, PIRE)
-			} /* End Method(_SB.INTE._DIS) */
-
-			Method(_PRS ,0) {
-				/* DBGO("\\_SB\\LNKE\\_PRS\n") */
-				Return(IRQP)
-			} /* Method(_SB.INTE._PRS) */
-
-			Method(_CRS ,0) {
-				/* DBGO("\\_SB\\LNKE\\_CRS\n") */
-				CreateWordField(IRQB, 0x1, IRQN)
-				ShiftLeft(1, PIRE, IRQN)
-				Return(IRQB)
-			} /* Method(_SB.INTE._CRS) */
-
-			Method(_SRS, 1) {
-				/* DBGO("\\_SB\\LNKE\\_CRS\n") */
-				CreateWordField(ARG0, 1, IRQM)
-
-				/* Use lowest available IRQ */
-				FindSetRightBit(IRQM, Local0)
-				if (Local0) {
-					Decrement(Local0)
-				}
-				Store(Local0, PIRE)
-			} /* End Method(_SB.INTE._SRS) */
-		} /* End Device(INTE)  */
-
-		Device(INTF) {
-			Name(_HID, EISAID("PNP0C0F"))
-			Name(_UID, 6)
-
-			Method(_STA, 0) {
-				if (PIRF) {
-					Return(0x0B) /* sata is invisible */
-				} else {
-					Return(0x09) /* sata is disabled */
-				}
-			} /* End Method(_SB.INTF._STA) */
-
-			Method(_DIS ,0) {
-				/* DBGO("\\_SB\\LNKF\\_DIS\n") */
-				//Store(0, PIRF)
-			} /* End Method(_SB.INTF._DIS) */
-
-			Method(_PRS ,0) {
-				/* DBGO("\\_SB\\LNKF\\_PRS\n") */
-				Return(PITF)
-			} /* Method(_SB.INTF._PRS) */
-
-			Method(_CRS ,0) {
-				/* DBGO("\\_SB\\LNKF\\_CRS\n") */
-				CreateWordField(IRQB, 0x1, IRQN)
-				ShiftLeft(1, PIRF, IRQN)
-				Return(IRQB)
-			} /* Method(_SB.INTF._CRS) */
-
-			Method(_SRS, 1) {
-				/* DBGO("\\_SB\\LNKF\\_CRS\n") */
-				CreateWordField(ARG0, 1, IRQM)
-
-				/* Use lowest available IRQ */
-				FindSetRightBit(IRQM, Local0)
-				if (Local0) {
-					Decrement(Local0)
-				}
-				Store(Local0, PIRF)
-			} /*  End Method(_SB.INTF._SRS) */
-		} /* End Device(INTF)  */
-
-		Device(INTG) {
-			Name(_HID, EISAID("PNP0C0F"))
-			Name(_UID, 7)
-
-			Method(_STA, 0) {
-				if (PIRG) {
-					Return(0x0B) /* sata is invisible */
-				} else {
-					Return(0x09) /* sata is disabled */
-				}
-			} /* End Method(_SB.INTG._STA)  */
-
-			Method(_DIS ,0) {
-				/* DBGO("\\_SB\\LNKG\\_DIS\n") */
-				//Store(0, PIRG)
-			} /* End Method(_SB.INTG._DIS)  */
-
-			Method(_PRS ,0) {
-				/* DBGO("\\_SB\\LNKG\\_PRS\n") */
-				Return(IRQP)
-			} /* Method(_SB.INTG._CRS)  */
-
-			Method(_CRS ,0) {
-				/* DBGO("\\_SB\\LNKG\\_CRS\n") */
-				CreateWordField(IRQB, 0x1, IRQN)
-				ShiftLeft(1, PIRG, IRQN)
-				Return(IRQB)
-			} /* Method(_SB.INTG._CRS)  */
-
-			Method(_SRS, 1) {
-				/* DBGO("\\_SB\\LNKG\\_CRS\n") */
-				CreateWordField(ARG0, 1, IRQM)
-
-				/* Use lowest available IRQ */
-				FindSetRightBit(IRQM, Local0)
-				if (Local0) {
-					Decrement(Local0)
-				}
-				Store(Local0, PIRG)
-			} /* End Method(_SB.INTG._SRS)  */
-		} /* End Device(INTG)  */
-
-		Device(INTH) {
-			Name(_HID, EISAID("PNP0C0F"))
-			Name(_UID, 8)
-
-			Method(_STA, 0) {
-				if (PIRH) {
-					Return(0x0B) /* sata is invisible */
-				} else {
-					Return(0x09) /* sata is disabled */
-				}
-			} /* End Method(_SB.INTH._STA)  */
-
-			Method(_DIS ,0) {
-				/* DBGO("\\_SB\\LNKH\\_DIS\n") */
-				//Store(0, PIRH)
-			} /* End Method(_SB.INTH._DIS)  */
-
-			Method(_PRS ,0) {
-				/* DBGO("\\_SB\\LNKH\\_PRS\n") */
-				Return(IRQP)
-			} /* Method(_SB.INTH._CRS)  */
-
-			Method(_CRS ,0) {
-				/* DBGO("\\_SB\\LNKH\\_CRS\n") */
-				CreateWordField(IRQB, 0x1, IRQN)
-				ShiftLeft(1, PIRH, IRQN)
-				Return(IRQB)
-			} /* Method(_SB.INTH._CRS)  */
-
-			Method(_SRS, 1) {
-				/* DBGO("\\_SB\\LNKH\\_CRS\n") */
-				CreateWordField(ARG0, 1, IRQM)
-
-				/* Use lowest available IRQ */
-				FindSetRightBit(IRQM, Local0)
-				if (Local0) {
-					Decrement(Local0)
-				}
-				//Store(Local0, PIRH)
-			} /* End Method(_SB.INTH._SRS)  */
-		} /* End Device(INTH)   */
-
-	}   /* End Scope(_SB)  */
-
-	/* Supported sleep states: */
-	Name(\_S0, Package () {0x00, 0x00, 0x00, 0x00} )	/* (S0) - working state */
-
-	If (LAnd(SSFG, 0x01)) {
-		Name(\_S1, Package () {0x01, 0x01, 0x00, 0x00} )	/* (S1) - sleeping w/CPU context */
-	}
-	If (LAnd(SSFG, 0x02)) {
-		Name(\_S2, Package () {0x02, 0x02, 0x00, 0x00} )	/* (S2) - "light" Suspend to RAM */
-	}
-	If (LAnd(SSFG, 0x04)) {
-		Name(\_S3, Package () {0x03, 0x03, 0x00, 0x00} )	/* (S3) - Suspend to RAM */
-	}
-	If (LAnd(SSFG, 0x08)) {
-		Name(\_S4, Package () {0x04, 0x04, 0x00, 0x00} )	/* (S4) - Suspend to Disk */
-	}
+		/* Describe IRQ Routing mapping for this platform (within the \_SB scope) */
+		#include "acpi/routing.asl"
 
-	Name(\_S5, Package () {0x05, 0x05, 0x00, 0x00} )	/* (S5) - Soft Off */
-
-	Name(\_SB.CSPS ,0)				/* Current Sleep State (S0, S1, S2, S3, S4, S5) */
-	Name(CSMS, 0)			/* Current System State */
-
-	/* Wake status package */
-	Name(WKST,Package(){Zero, Zero})
-
-	/*
-	* \_PTS - Prepare to Sleep method
-	*
-	*	Entry:
-	*		Arg0=The value of the sleeping state S1=1, S2=2, etc
-	*
-	* Exit:
-	*		-none-
-	*
-	* The _PTS control method is executed at the beginning of the sleep process
-	* for S1-S5. The sleeping value is passed to the _PTS control method.	This
-	* control method may be executed a relatively long time before entering the
-	* sleep state and the OS may abort	the operation without notification to
-	* the ACPI driver.  This method cannot modify the configuration or power
-	* state of any device in the system.
-	*/
-	Method(_PTS, 1) {
-		/* DBGO("\\_PTS\n") */
-		/* DBGO("From S0 to S") */
-		/* DBGO(Arg0) */
-		/* DBGO("\n") */
-
-		/* Don't allow PCIRST# to reset USB */
-		//if (LEqual(Arg0,3)){
-		//	Store(0,URRE)
-		//}
-
-		/* Clear sleep SMI status flag and enable sleep SMI trap. */
-		/*Store(One, CSSM)
-		Store(One, SSEN)*/
-
-		/* On older chips, clear PciExpWakeDisEn */
-		/*if (LLessEqual(\_SB.SBRI, 0x13)) {
-		*    	Store(0,\_SB.PWDE)
-		*}
-		*/
-
-		/* Clear wake status structure. */
-		Store(0, Index(WKST,0))
-		Store(0, Index(WKST,1))
-		Store(7, UPWS)
-	} /* End Method(\_PTS) */
-
-	/*
-	*  The following method results in a "not a valid reserved NameSeg"
-	*  warning so I have commented it out for the duration.  It isn't
-	*  used, so it could be removed.
-	*
-	*
-	*  	\_GTS OEM Going To Sleep method
-	*
-	*  	Entry:
-	*  		Arg0=The value of the sleeping state S1=1, S2=2
-	*
-	*  	Exit:
-	*  		-none-
-	*
-	*  Method(\_GTS, 1) {
-	*  DBGO("\\_GTS\n")
-	*  DBGO("From S0 to S")
-	*  DBGO(Arg0)
-	*  DBGO("\n")
-	*  }
-	*/
-
-	/*
-	*	\_BFS OEM Back From Sleep method
-	*
-	*	Entry:
-	*		Arg0=The value of the sleeping state S1=1, S2=2
-	*
-	*	Exit:
-	*		-none-
-	*/
-	Method(\_BFS, 1) {
-		/* DBGO("\\_BFS\n") */
-		/* DBGO("From S") */
-		/* DBGO(Arg0) */
-		/* DBGO(" to S0\n") */
-	}
-
-	/*
-	*  \_WAK System Wake method
-	*
-	*	Entry:
-	*		Arg0=The value of the sleeping state S1=1, S2=2
-	*
-	*	Exit:
-	*		Return package of 2 DWords
-	*		Dword 1 - Status
-	*			0x00000000	wake succeeded
-	*			0x00000001	Wake was signaled but failed due to lack of power
-	*			0x00000002	Wake was signaled but failed due to thermal condition
-	*		Dword 2 - Power Supply state
-	*			if non-zero the effective S-state the power supply entered
-	*/
-	Method(\_WAK, 1) {
-		/* DBGO("\\_WAK\n") */
-		/* DBGO("From S") */
-		/* DBGO(Arg0) */
-		/* DBGO(" to S0\n") */
-
-		/* Re-enable HPET */
-		//Store(1,HPDE)
-
-		/* Restore PCIRST# so it resets USB */
-		//if (LEqual(Arg0,3)){
-		//	Store(1,URRE)
-		//}
-
-		/* Arbitrarily clear PciExpWakeStatus */
-		//Store(PWST, PWST)
-
-		/* if(DeRefOf(Index(WKST,0))) {
-		*	Store(0, Index(WKST,1))
-		* } else {
-		*	Store(Arg0, Index(WKST,1))
-		* }
-		*/
-		Return(WKST)
-	} /* End Method(\_WAK) */
-
-	Scope(\_GPE) {	/* Start Scope GPE */
-		/*  General event 0  */
-		/* Method(_L00) {
-		*	DBGO("\\_GPE\\_L00\n")
-		* }
-		*/
-
-		/*  General event 1  */
-		/* Method(_L01) {
-		*	DBGO("\\_GPE\\_L00\n")
-		* }
-		*/
-
-		/*  General event 2  */
-		/* Method(_L02) {
-		*	DBGO("\\_GPE\\_L00\n")
-		* }
-		*/
-
-		/*  General event 3  */
-		Method(_L03) {
-			/* DBGO("\\_GPE\\_L00\n") */
-			Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
-		}
-
-		/*  General event 4  */
-		/* Method(_L04) {
-		*	DBGO("\\_GPE\\_L00\n")
-		* }
-		*/
-
-		/*  General event 5  */
-		/* Method(_L05) {
-		*	DBGO("\\_GPE\\_L00\n")
-		* }
-		*/
-
-		/*  General event 6 - Used for GPM6, moved to USB.asl */
-		/* Method(_L06) {
-		*	DBGO("\\_GPE\\_L00\n")
-		* }
-		*/
-
-		/*  General event 7 - Used for GPM7, moved to USB.asl */
-		/* Method(_L07) {
-		*	DBGO("\\_GPE\\_L07\n")
-		* }
-		*/
-
-		/*  Legacy PM event  */
-		Method(_L08) {
-			/* DBGO("\\_GPE\\_L08\n") */
-		}
-
-		/*  Temp warning (TWarn) event  */
-		Method(_L09) {
-			/* DBGO("\\_GPE\\_L09\n") */
-			/* Notify (\_TZ.TZ00, 0x80) */
-		}
-
-		/*  Reserved  */
-		/* Method(_L0A) {
-		*	DBGO("\\_GPE\\_L0A\n")
-		* }
-		*/
-
-		/*  USB controller PME#  */
-		Method(_L0B) {
-			/* DBGO("\\_GPE\\_L0B\n") */
-			Notify(\_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */
-			Notify(\_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */
-			Notify(\_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */
-			Notify(\_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */
-			Notify(\_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */
-			Notify(\_SB.PCI0.UOH6, 0x02) /* NOTIFY_DEVICE_WAKE */
-			Notify(\_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */
-			Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
-		}
-
-		/*  AC97 controller PME#  */
-		/* Method(_L0C) {
-		*	DBGO("\\_GPE\\_L0C\n")
-		* }
-		*/
-
-		/*  OtherTherm PME#  */
-		/* Method(_L0D) {
-		*	DBGO("\\_GPE\\_L0D\n")
-		* }
-		*/
-
-		/*  GPM9 SCI event - Moved to USB.asl */
-		/* Method(_L0E) {
-		*	DBGO("\\_GPE\\_L0E\n")
-		* }
-		*/
-
-		/*  PCIe HotPlug event  */
-		/* Method(_L0F) {
-		* 	DBGO("\\_GPE\\_L0F\n")
-		* }
-		*/
-
-		/*  ExtEvent0 SCI event  */
-		Method(_L10) {
-			/* DBGO("\\_GPE\\_L10\n") */
-		}
-
-		/*  ExtEvent1 SCI event  */
-		Method(_L11) {
-			/* DBGO("\\_GPE\\_L11\n") */
-		}
-
-		/*  PCIe PME# event  */
-		/* Method(_L12) {
-		*	DBGO("\\_GPE\\_L12\n")
-		* }
-		*/
-
-		/*  GPM0 SCI event - Moved to USB.asl */
-		/* Method(_L13) {
-		* 	DBGO("\\_GPE\\_L13\n")
-		* }
-		*/
-
-		/*  GPM1 SCI event - Moved to USB.asl */
-		/* Method(_L14) {
-		* 	DBGO("\\_GPE\\_L14\n")
-		* }
-		*/
-
-		/*  GPM2 SCI event - Moved to USB.asl */
-		/* Method(_L15) {
-		* 	DBGO("\\_GPE\\_L15\n")
-		* }
-		*/
-
-		/*  GPM3 SCI event - Moved to USB.asl */
-		/* Method(_L16) {
-		*	DBGO("\\_GPE\\_L16\n")
-		* }
-		*/
-
-		/*  GPM8 SCI event - Moved to USB.asl */
-		/* Method(_L17) {
-		* 	DBGO("\\_GPE\\_L17\n")
-		* }
-		*/
-
-		/*  GPIO0 or GEvent8 event  */
-		Method(_L18) {
-			/* DBGO("\\_GPE\\_L18\n") */
-			Notify(\_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */
-#if 0
-			Notify(\_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */
-			Notify(\_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */
-			Notify(\_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */
-#endif
-			Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
-		}
-
-		/*  GPM4 SCI event - Moved to USB.asl */
-		/* Method(_L19) {
-		* 	DBGO("\\_GPE\\_L19\n")
-		* }
-		*/
-
-		/*  GPM5 SCI event - Moved to USB.asl */
-		/* Method(_L1A) {
-		*	DBGO("\\_GPE\\_L1A\n")
-		* }
-		*/
-
-		/*  Azalia SCI event  */
-		Method(_L1B) {
-			/* DBGO("\\_GPE\\_L1B\n") */
-			Notify(\_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */
-			Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
-		}
-
-		/*  GPM6 SCI event - Reassigned to _L06 */
-		/* Method(_L1C) {
-		*	DBGO("\\_GPE\\_L1C\n")
-		* }
-		*/
-
-		/*  GPM7 SCI event - Reassigned to _L07 */
-		/* Method(_L1D) {
-		*	DBGO("\\_GPE\\_L1D\n")
-		* }
-		*/
-
-		/*  GPIO2 or GPIO66 SCI event  */
-		/* Method(_L1E) {
-		* 	DBGO("\\_GPE\\_L1E\n")
-		* }
-		*/
-
-		/*  SATA SCI event - Moved to sata.asl */
-		/* Method(_L1F) {
-		*	 DBGO("\\_GPE\\_L1F\n")
-		* }
-		*/
-
-	} 	/* End Scope GPE */
-
-	//#include "acpi/usb.asl"
-
-	/* System Bus */
-	Scope(\_SB) { /* Start \_SB scope */
-		#include "../../../arch/x86/acpi/globutil.asl" /* global utility methods expected within the \_SB scope */
-
-		/*  _SB.PCI0 */
-		/* Note: Only need HID on Primary Bus */
 		Device(PCI0) {
-			External (TOM1)
-			External (TOM2)
-			Name(_HID, EISAID("PNP0A03"))
-			Name(_ADR, 0x00180000)	/* Dev# = BSP Dev#, Func# = 0 */
-			Method(_BBN, 0) { /* Bus number = 0 */
-				Return(0)
-			}
-			Method(_STA, 0) {
-				/* DBGO("\\_SB\\PCI0\\_STA\n") */
-				Return(0x0B)     /* Status is visible */
-			}
-
-			Method(_PRT,0) {
-				If(PMOD){ Return(APR0) }   /* APIC mode */
-				Return (PR0)                  /* PIC Mode */
-			} /* end _PRT */
-
-			/* Describe the Northbridge devices Dev0 ,Func0*/
-			Device(AMRT) {
-				Name(_ADR, 0x00000000)
-			} /* end AMRT */
-
-			/* Dev2 is also an external GFX bridge */
-			Device(PBR2) {
-				Name(_ADR, 0x00020000)
-				Name(_PRW, Package() {0x18, 4})
-				Method(_PRT,0) {
-					If(PMOD){ Return(APS2) }   /* APIC mode */
-					Return (PS2)                  /* PIC Mode */
-				} /* end _PRT */
-			} /* end PBR2 */
-
-			Device(PBR4) {
-				Name(_ADR, 0x00040000)
-				Name(_PRW, Package() {0x18, 4})
-				Method(_PRT,0) {
-					If(PMOD){ Return(APS4) }   /* APIC mode */
-					Return (PS4)                  /* PIC Mode */
-				} /* end _PRT */
-			} /* end PBR4 */
+			/* Describe the AMD Northbridge */
+			#include <northbridge/amd/agesa/family15tn/acpi/northbridge.asl>
 
-			/* PCI slot 1, 2, 3 */
-			Device(PIBR) {
-				Name(_ADR, 0x00140004)
-				Name(_PRW, Package() {0x18, 4})
-				/* TODO: non APIC rounting */
-				Method(_PRT,0) {
-					Return (PCIB)
-				}
-			}
+			/* Describe the AMD Fusion Controller Hub Southbridge */
+			#include <southbridge/amd/agesa/hudson/acpi/fch.asl>
 
-			/* Describe the Southbridge devices */
-			/* PCIe 1x SB */
-			Device(SBR0) {
+			/**
+			 * TODO: The devices listed here (SBR0 and SBR1) do not appear to
+			 *       be referenced anywhere and could possibly be removed.
+			 */
+			Device(SBR0) { /* PCIe 1x SB */
 				Name(_ADR, 0x00150000)
 				Name(_PRW, Package() {0x18, 4})
 				Method(_PRT,0) {
 					If(PMOD){ Return(ABR0) }   /* APIC mode */
-					Return (PBR0)                  /* PIC Mode */
-				} /* end _PRT */
-			} /* end SBR0 */
-
+					Return (PBR0)              /* PIC mode  */
+				}
+			}
 
-			/* Onboard network */
-			Device(SBR1) {
+			Device(SBR1) { /* Onboard network */
 				Name(_ADR, 0x00150001)
 				Name(_PRW, Package() {0x18, 4})
 				Method(_PRT, 0) {
 					If(PMOD){ Return(ABR1) }   /* APIC mode */
-					Return (PBR1)                  /* PIC Mode */
-				} /* end _PRT */
-			} /* end SBR1 */
-
-			Device(STCR) {
-				Name(_ADR, 0x00110000)
-				//#include "acpi/sata.asl"
-			} /* end STCR */
-
-			Device(UOH1) {
-				Name(_ADR, 0x00120000)
-				Name(_PRW, Package() {0x0B, 3})
-			} /* end UOH1 */
-
-			Device(UOH2) {
-				Name(_ADR, 0x00120002)
-				Name(_PRW, Package() {0x0B, 3})
-			} /* end UOH2 */
-
-			Device(UOH3) {
-				Name(_ADR, 0x00130000)
-				Name(_PRW, Package() {0x0B, 3})
-			} /* end UOH3 */
-
-			Device(UOH4) {
-				Name(_ADR, 0x00130002)
-				Name(_PRW, Package() {0x0B, 3})
-			} /* end UOH4 */
-
-			Device(UOH5) {
-				Name(_ADR, 0x00160000)
-				Name(_PRW, Package() {0x0B, 3})
-			} /* end UOH5 */
-
-			Device(UOH6) {
-				Name(_ADR, 0x00160002)
-				Name(_PRW, Package() {0x0B, 3})
-			} /* end UOH5 */
-
-			Device(UEH1) {
-				Name(_ADR, 0x00140005)
-				Name(_PRW, Package() {0x0B, 3})
-			} /* end UEH1 */
-
-			Device(XHC0) {
-				Name(_ADR, 0x00100000)
-				Name(_PRW, Package() {0x0B, 4})
-			} /* end XHC0 */
-			Device(XHC1) {
-				Name(_ADR, 0x00100001)
-				Name(_PRW, Package() {0x0B, 4})
-			} /* end XHC1 */
-
-			Device(SBUS) {
-				Name(_ADR, 0x00140000)
-			} /* end SBUS */
-
-			/* Primary (and only) IDE channel */
-			Device(IDEC) {
-				Name(_ADR, 0x00140001)
-				//#include "acpi/ide.asl"
-			} /* end IDEC */
-
-			Device(AZHD) {
-				Name(_ADR, 0x00140002)
-				OperationRegion(AZPD, PCI_Config, 0x00, 0x100)
-					Field(AZPD, AnyAcc, NoLock, Preserve) {
-					offset (0x42),
-					NSDI, 1,
-					NSDO, 1,
-					NSEN, 1,
-					offset (0x44),
-					IPCR, 4,
-					offset (0x54),
-					PWST, 2,
-					, 6,
-					PMEB, 1,
-					, 6,
-					PMST, 1,
-					offset (0x62),
-					MMCR, 1,
-					offset (0x64),
-					MMLA, 32,
-					offset (0x68),
-					MMHA, 32,
-					offset (0x6C),
-					MMDT, 16,
-				}
-
-				Method(_INI) {
-					If(LEqual(OSTP,3)){   /* If we are running Linux */
-						Store(zero, NSEN)
-						Store(one, NSDO)
-						Store(one, NSDI)
-					}
-				}
-			} /* end AZHD */
-
-			Device(LIBR) {
-				Name(_ADR, 0x00140003)
-				/* Method(_INI) {
-				*	DBGO("\\_SB\\PCI0\\LpcIsaBr\\_INI\n")
-				} */ /* End Method(_SB.SBRDG._INI) */
-
-				OperationRegion(CFG,PCI_Config,0x0,0x100) // Map PCI Configuration Space
-				Field(CFG,DWordAcc,NoLock,Preserve){
-				Offset(0xA0),
-				BAR,32}		// SPI Controller Base Address Register (Index 0xA0)
-
-				Device(LDRC)	// LPC device: Resource consumption
-				{
-						Name (_HID, EISAID("PNP0C02"))  // ID for Motherboard resources
-						Name (CRS, ResourceTemplate ()  // Current Motherboard resources
-						{
-							Memory32Fixed(ReadWrite,    // Setup for fixed resource location for SPI base address
-							0x00000000,					// Address Base
-							0x00000000,					// Address Length
-							BAR0						// Descriptor Name
-							)
-						})
-
-						Method(_CRS,0,NotSerialized)
-						{
-							CreateDwordField(^CRS,^BAR0._BAS,SPIB)  // Field to hold SPI base address
-							CreateDwordField(^CRS,^BAR0._LEN,SPIL)  // Field to hold SPI address length
-							Store(BAR,SPIB)		// SPI base address mapped
-							Store(0x1000,SPIL)	// 4k space mapped
-							Return(CRS)
-						}
+					Return (PBR1)              /* PIC mode  */
 				}
+			}
+		}
 
-				/* Real Time Clock Device */
-				Device(RTC0) {
-					Name(_HID, EISAID("PNP0B00"))   /* AT Real Time Clock (not PIIX4 compatible) */
-					Name(_CRS, ResourceTemplate() {
-						IRQNoFlags(){8}
-						IO(Decode16,0x0070, 0x0070, 0, 2)
-						/* IO(Decode16,0x0070, 0x0070, 0, 4) */
-					})
-				} /* End Device(_SB.PCI0.LpcIsaBr.RTC0) */
-
-				Device(TMR) {	/* Timer */
-					Name(_HID,EISAID("PNP0100"))	/* System Timer */
-					Name(_CRS, ResourceTemplate() {
-						IRQNoFlags(){0}
-						IO(Decode16, 0x0040, 0x0040, 0, 4)
-						/* IO(Decode16, 0x0048, 0x0048, 0, 4) */
-					})
-				} /* End Device(_SB.PCI0.LpcIsaBr.TMR) */
-
-				Device(SPKR) {	/* Speaker */
-					Name(_HID,EISAID("PNP0800"))	/* AT style speaker */
-					Name(_CRS, ResourceTemplate() {
-						IO(Decode16, 0x0061, 0x0061, 0, 1)
-					})
-				} /* End Device(_SB.PCI0.LpcIsaBr.SPKR) */
-
-				Device(PIC) {
-					Name(_HID,EISAID("PNP0000"))	/* AT Interrupt Controller */
-					Name(_CRS, ResourceTemplate() {
-						IRQNoFlags(){2}
-						IO(Decode16,0x0020, 0x0020, 0, 2)
-						IO(Decode16,0x00A0, 0x00A0, 0, 2)
-						/* IO(Decode16, 0x00D0, 0x00D0, 0x10, 0x02) */
-						/* IO(Decode16, 0x04D0, 0x04D0, 0x10, 0x02) */
-					})
-				} /* End Device(_SB.PCI0.LpcIsaBr.PIC) */
-
-				Device(MAD) { /* 8257 DMA */
-					Name(_HID,EISAID("PNP0200"))	/* Hardware Device ID */
-					Name(_CRS, ResourceTemplate() {
-						DMA(Compatibility,BusMaster,Transfer8){4}
-						IO(Decode16, 0x0000, 0x0000, 0x10, 0x10)
-						IO(Decode16, 0x0081, 0x0081, 0x01, 0x03)
-						IO(Decode16, 0x0087, 0x0087, 0x01, 0x01)
-						IO(Decode16, 0x0089, 0x0089, 0x01, 0x03)
-						IO(Decode16, 0x008F, 0x008F, 0x01, 0x01)
-						IO(Decode16, 0x00C0, 0x00C0, 0x10, 0x20)
-					}) /* End Name(_SB.PCI0.LpcIsaBr.MAD._CRS) */
-				} /* End Device(_SB.PCI0.LpcIsaBr.MAD) */
-
-				Device(COPR) {
-					Name(_HID,EISAID("PNP0C04"))	/* Math Coprocessor */
-					Name(_CRS, ResourceTemplate() {
-						IO(Decode16, 0x00F0, 0x00F0, 0, 0x10)
-						IRQNoFlags(){13}
-					})
-				} /* End Device(_SB.PCI0.LpcIsaBr.COPR) */
-			} /* end LIBR */
-
-			Device(HPBR) {
-				Name(_ADR, 0x00140004)
-			} /* end HostPciBr */
-
-			Device(ACAD) {
-				Name(_ADR, 0x00140005)
-			} /* end Ac97audio */
-
-			Device(ACMD) {
-				Name(_ADR, 0x00140006)
-			} /* end Ac97modem */
-
-			Name(CRES, ResourceTemplate() {
-				/* Set the Bus number and Secondary Bus number for the PCI0 device
-				 * The Secondary bus range for PCI0 lets the system
-				 * know what bus values are allowed on the downstream
-				 * side of this PCI bus if there is a PCI-PCI bridge.
-				 * PCI busses can have 256 secondary busses which
-				 * range from [0-0xFF] but they do not need to be
-				 * sequential.
-				*/
-				WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode,
-					0x0000,		/* address granularity */
-					0x0000,		/* range minimum */
-					0x00FF,		/* range maximum */
-					0x0000,		/* translation */
-					0x0100,		/* length */
-					,, PSB0)	/* ResourceSourceIndex, ResourceSource, DescriptorName */
-
-				IO(Decode16, 0x0CF8, 0x0CF8, 1,	8)
-
-				WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
-					0x0000,			/* address granularity */
-					0x0000,			/* range minimum */
-					0x0CF7,			/* range maximum */
-					0x0000,			/* translation */
-					0x0CF8			/* length */
-				)
-				WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
-					0x0000,			/* address granularity */
-					0x03B0,			/* range minimum */
-					0x03DF,			/* range maximum */
-					0x0000,			/* translation */
-					0x0030			/* length */
-				)
-
-				WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
-					0x0000,			/* address granularity */
-					0x0D00,			/* range minimum */
-					0xFFFF,			/* range maximum */
-					0x0000,			/* translation */
-					0xF300			/* length */
-				)
-
-				Memory32Fixed(READONLY, 0x000A0000, 0x00020000, VGAM) 	/* VGA memory space */
-				Memory32Fixed(READONLY, 0x000C0000, 0x00020000, EMM1)	/* Assume C0000-E0000 empty */
-                                /* memory space for PCI BARs below 4GB */
-                                Memory32Fixed(ReadOnly, 0x00000000, 0x00000000, MMIO)
-			}) /* End Name(_SB.PCI0.CRES) */
-
-			Method(_CRS, 0) {
-				/* DBGO("\\_SB\\PCI0\\_CRS\n") */
-				CreateDWordField(CRES, ^MMIO._BAS, MM1B)
-                                CreateDWordField(CRES, ^MMIO._LEN, MM1L)
-                                /*
-                                 * Declare memory between TOM1 and 4GB as available
-                                 * for PCI MMIO.
-                                 * Use ShiftLeft to avoid 64bit constant (for XP).
-                                 * This will work even if the OS does 32bit arithmetic, as
-                                 * 32bit (0x00000000 - TOM1) will wrap and give the same
-                                 * result as 64bit (0x100000000 - TOM1).
-                                 */
-                                Store(TOM1, MM1B)
-                                ShiftLeft(0x10000000, 4, Local0)
-                                Subtract(Local0, TOM1, Local0)
-                                Store(Local0, MM1L)
+		/* Describe PCI INT[A-H] for the Southbridge */
+		#include <southbridge/amd/agesa/hudson/acpi/pci_int.asl>
 
-				Return(CRES) /* note to change the Name buffer */
-			} /* end of Method(_SB.PCI0._CRS) */
+	}   /* End Scope(_SB)  */
 
-			/*
-			*
-			*               FIRST METHOD CALLED UPON BOOT
-			*
-			*  1. If debugging, print current OS and ACPI interpreter.
-			*  2. Get PCI Interrupt routing from ACPI VSM, this
-			*     value is based on user choice in BIOS setup.
-			*/
-			Method(_INI, 0) {
-				/* DBGO("\\_SB\\_INI\n") */
-				/* DBGO("   DSDT.ASL code from ") */
-				/* DBGO(__DATE__) */
-				/* DBGO(" ") */
-				/* DBGO(__TIME__) */
-				/* DBGO("\n   Sleep states supported: ") */
-				/* DBGO("\n") */
-				/* DBGO("   \\_OS=") */
-				/* DBGO(\_OS) */
-				/* DBGO("\n   \\_REV=") */
-				/* DBGO(\_REV) */
-				/* DBGO("\n") */
+	/* Describe SMBUS for the Southbridge */
+	#include <southbridge/amd/agesa/hudson/acpi/smbus.asl>
 
-				/* Determine the OS we're running on */
-				CkOT()
+	/* Define the General Purpose Events for the platform */
+	#include "acpi/gpe.asl"
 
-				/* On older chips, clear PciExpWakeDisEn */
-				/*if (LLessEqual(\SBRI, 0x13)) {
-				*    	Store(0,\PWDE)
-				* }
-				*/
-			} /* End Method(_SB._INI) */
-		} /* End Device(PCI0)  */
+	/* Define the Thermal zones and methods for the platform */
+	#include "acpi/thermal.asl"
 
-		Device(PWRB) {	/* Start Power button device */
-			Name(_HID, EISAID("PNP0C0C"))
-			Name(_UID, 0xAA)
-			Name(_PRW, Package () {3, 0x04})	/* wake from S1-S4 */
-			Name(_STA, 0x0B) /* sata is invisible */
-		}
-	} /* End \_SB scope */
+	/* Define the System Indicators for the platform */
+	#include "acpi/si.asl"
 
-	Scope(\_SI) {
-		Method(_SST, 1) {
-			/* DBGO("\\_SI\\_SST\n") */
-			/* DBGO("   New Indicator state: ") */
-			/* DBGO(Arg0) */
-			/* DBGO("\n") */
-		}
-	} /* End Scope SI */
 }
 /* End of ASL file */