diff options
author | Kyösti Mälkki <kyosti.malkki@gmail.com> | 2018-05-24 00:04:22 +0300 |
---|---|---|
committer | Kyösti Mälkki <kyosti.malkki@gmail.com> | 2018-05-31 03:41:11 +0000 |
commit | 1740230ace3aeede3a7ee5cadd1e17744cda07b3 (patch) | |
tree | bf4e9f45d71fef44056ba901ac91fcbfb423a525 /src/mainboard/asus/a8v-e_se/romstage.c | |
parent | f054a4bf3d6ce459d15c9375e4ca2390d04ffb68 (diff) |
Remove all AMD K8 boards
Platforms with LATE_CBMEM_INIT were agreed to be
removed with 4.7 release late 2017.
Change-Id: I0ecbb40f8c7ebdf68217f50af5624905d9005c64
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/26671
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Diffstat (limited to 'src/mainboard/asus/a8v-e_se/romstage.c')
-rw-r--r-- | src/mainboard/asus/a8v-e_se/romstage.c | 206 |
1 files changed, 0 insertions, 206 deletions
diff --git a/src/mainboard/asus/a8v-e_se/romstage.c b/src/mainboard/asus/a8v-e_se/romstage.c deleted file mode 100644 index 2df2a48815..0000000000 --- a/src/mainboard/asus/a8v-e_se/romstage.c +++ /dev/null @@ -1,206 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2006 AMD - * (Written by Yinghai Lu <yinghailu@amd.com> for AMD) - * Copyright (C) 2006 MSI - * (Written by Bingxun Shi <bingxunshi@gmail.com> for MSI) - * Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -unsigned int get_sbdn(unsigned bus); - -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <pc80/mc146818rtc.h> -#include <console/console.h> -#include <cpu/amd/model_fxx_rev.h> -#include <halt.h> -#include <northbridge/amd/amdk8/raminit.h> -#include <delay.h> -#include <cpu/x86/lapic.h> -#include "northbridge/amd/amdk8/early_ht.c" -#include <superio/winbond/common/winbond.h> -#include <superio/winbond/w83627ehg/w83627ehg.h> -#include <southbridge/via/vt8237r/vt8237r.h> -#include <cpu/amd/car.h> -#include <cpu/x86/bist.h> -#include "northbridge/amd/amdk8/setup_resource_map.c" -#include <spd.h> -#include <northbridge/amd/amdk8/pre_f.h> - -#define SERIAL_DEV PNP_DEV(0x2e, W83627EHG_SP1) -#define GPIO_DEV PNP_DEV(0x2e, W83627EHG_GPIO_SUSLED_V) -#define ACPI_DEV PNP_DEV(0x2e, W83627EHG_ACPI) - -void memreset(int controllers, const struct mem_controller *ctrl) { } -void activate_spd_rom(const struct mem_controller *ctrl) { } - -int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - -#include <reset.h> -void do_soft_reset(void) -{ - uint8_t tmp; - - set_bios_reset(); - printk(BIOS_DEBUG, "soft reset\n"); - - /* PCI reset */ - tmp = pci_read_config8(PCI_DEV(0, 0x11, 0), 0x4f); - tmp |= 0x01; - pci_write_config8(PCI_DEV(0, 0x11, 0), 0x4f, tmp); - - halt(); -} - -#include "southbridge/via/k8t890/early_car.c" -#include <northbridge/amd/amdk8/amdk8.h> -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include "northbridge/amd/amdk8/raminit.c" -#include "lib/generic_sdram.c" -#include "cpu/amd/dualcore/dualcore.c" -#include "cpu/amd/model_fxx/init_cpus.c" -#include "cpu/amd/model_fxx/fidvid.c" -#include "northbridge/amd/amdk8/resourcemap.c" - -unsigned int get_sbdn(unsigned bus) -{ - pci_devfn_t dev; - - dev = pci_locate_device_on_bus(PCI_ID(PCI_VENDOR_ID_VIA, - PCI_DEVICE_ID_VIA_VT8237R_LPC), bus); - return (dev >> 15) & 0x1f; -} - -static void sio_init(void) -{ - u8 reg; - - pnp_enter_conf_state(SERIAL_DEV); - /* We have 24MHz input. */ - reg = pnp_read_config(SERIAL_DEV, 0x24); - pnp_write_config(SERIAL_DEV, 0x24, (reg & ~0x40)); - /* We have GPIO for KB/MS pin. */ - reg = pnp_read_config(SERIAL_DEV, 0x2a); - pnp_write_config(SERIAL_DEV, 0x2a, (reg | 1)); - /* We have all RESTOUT and even some reserved bits, too. */ - reg = pnp_read_config(SERIAL_DEV, 0x2c); - pnp_write_config(SERIAL_DEV, 0x2c, (reg | 0xf0)); - pnp_exit_conf_state(SERIAL_DEV); - - pnp_enter_conf_state(ACPI_DEV); - pnp_set_logical_device(ACPI_DEV); - /* - * Set the delay rising time from PWROK_LP to PWROK_ST to - * 300 - 600ms, and 0 to vice versa. - */ - reg = pnp_read_config(ACPI_DEV, 0xe6); - pnp_write_config(ACPI_DEV, 0xe6, (reg & 0xf0)); - /* 1 Use external suspend clock source 32.768KHz. Undocumented?? */ - reg = pnp_read_config(ACPI_DEV, 0xe4); - pnp_write_config(ACPI_DEV, 0xe4, (reg | 0x10)); - pnp_exit_conf_state(ACPI_DEV); - - pnp_enter_conf_state(GPIO_DEV); - pnp_set_logical_device(GPIO_DEV); - /* Set memory voltage to 2.75V, vcore offset + 100mV, 1.5V chipset voltage. */ - pnp_write_config(GPIO_DEV, 0x30, 0x09); /* Enable GPIO 2 & GPIO 5. */ - pnp_write_config(GPIO_DEV, 0xe2, 0x00); /* No inversion */ - pnp_write_config(GPIO_DEV, 0xe5, 0x00); /* No inversion */ - pnp_write_config(GPIO_DEV, 0xe3, 0x03); /* 0000 0011, 0 = output 1 = input */ - pnp_write_config(GPIO_DEV, 0xe0, 0xde); /* 1101 1110, 0 = output 1 = input */ - pnp_write_config(GPIO_DEV, 0xe1, 0x01); /* Set output val. */ - pnp_write_config(GPIO_DEV, 0xe4, 0xb4); /* Set output val (1011 0100). */ - pnp_exit_conf_state(GPIO_DEV); -} - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - static const uint16_t spd_addr[] = { - // Node 0 - DIMM0, DIMM2, 0, 0, - 0, 0, 0, 0, - // Node 1 - DIMM1, DIMM3, 0, 0, - 0, 0, 0, 0, - }; - unsigned bsp_apicid = 0; - int needs_reset = 0; - struct sys_info *sysinfo = &sysinfo_car; - - sio_init(); - winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - enable_rom_decode(); - - printk(BIOS_INFO, "now booting... fallback\n"); - - /* Is this a CPU only reset? Or is this a secondary CPU? */ - if (!cpu_init_detectedx && boot_cpu()) { - /* Nothing special needs to be done to find bus 0. */ - /* Allow the HT devices to be found. */ - enumerate_ht_chain(); - } - - printk(BIOS_INFO, "now booting... real_main\n"); - - if (bist == 0) - bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); - - /* Halt if there was a built in self test failure. */ - report_bist_failure(bist); - - setup_default_resource_map(); - setup_coherent_ht_domain(); - wait_all_core0_started(); - - printk(BIOS_INFO, "now booting... Core0 started\n"); - -#if IS_ENABLED(CONFIG_LOGICAL_CPUS) - /* It is said that we should start core1 after all core0 launched. */ - start_other_cores(); - wait_all_other_cores_started(bsp_apicid); -#endif - init_timer(); - ht_setup_chains_x(sysinfo); /* Init sblnk and sbbusn, nodes, sbdn. */ - - needs_reset = optimize_link_coherent_ht(); - needs_reset |= optimize_link_incoherent_ht(sysinfo); - needs_reset |= k8t890_early_setup_ht(); - - if (needs_reset) { - printk(BIOS_DEBUG, "ht reset -\n"); - soft_reset(); - } - - /* the HT settings needs to be OK, because link freq chnage may cause HT disconnect */ - enable_fid_change(); - init_fidvid_bsp(bsp_apicid); - - /* Stop the APs so we can start them later in init. */ - allow_all_aps_stop(bsp_apicid); - - /* It's the time to set ctrl now. */ - fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); - - enable_smbus(); - sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); -} |