asrock/imb-a180: Remove commented oem_fan_control()

Change-Id: Ibfbb2ff2d9776fe91a8a09561d9c32eb49a56db6
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/21187
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>

1 files changed, 0 insertions, 181 deletions

diff --git a/src/mainboard/asrock/imb-a180/BiosCallOuts.c b/src/mainboard/asrock/imb-a180/BiosCallOuts.c
index 37b175cccc..9c316bdfe5 100644
--- a/src/mainboard/asrock/imb-a180/BiosCallOuts.c
+++ b/src/mainboard/asrock/imb-a180/BiosCallOuts.c
@@ -110,184 +110,6 @@ static const CODEC_TBL_LIST CodecTableList[] =
 	{(UINT32)0x0FFFFFFFF, (CODEC_ENTRY*)0x0FFFFFFFFUL}
 };
 
-#define FAN_INPUT_INTERNAL_DIODE	0
-#define FAN_INPUT_TEMP0			1
-#define FAN_INPUT_TEMP1			2
-#define FAN_INPUT_TEMP2			3
-#define FAN_INPUT_TEMP3			4
-#define FAN_INPUT_TEMP0_FILTER		5
-#define FAN_INPUT_ZERO			6
-#define FAN_INPUT_DISABLED		7
-
-#define FAN_AUTOMODE			(1 << 0)
-#define FAN_LINEARMODE			(1 << 1)
-#define FAN_STEPMODE			~(1 << 1)
-#define FAN_POLARITY_HIGH		(1 << 2)
-#define FAN_POLARITY_LOW		~(1 << 2)
-
-/* Normally, 4-wire fan runs at 25KHz and 3-wire fan runs at 100Hz */
-#define FREQ_28KHZ			0x0
-#define FREQ_25KHZ			0x1
-#define FREQ_23KHZ			0x2
-#define FREQ_21KHZ			0x3
-#define FREQ_29KHZ			0x4
-#define FREQ_18KHZ			0x5
-#define FREQ_100HZ			0xF7
-#define FREQ_87HZ			0xF8
-#define FREQ_58HZ			0xF9
-#define FREQ_44HZ			0xFA
-#define FREQ_35HZ			0xFB
-#define FREQ_29HZ			0xFC
-#define FREQ_22HZ			0xFD
-#define FREQ_14HZ			0xFE
-#define FREQ_11HZ			0xFF
-
-/* imb_a180 Hardware Monitor Fan Control
- * Hardware limitation:
- *  HWM failed to read the input temperture vi I2C,
- *  if other software switch the I2C switch by mistake or intention.
- *  We recommend to using IMC to control Fans, instead of HWM.
- */
-#if 0
-static void oem_fan_control(FCH_DATA_BLOCK *FchParams)
-{
-	FCH_HWM_FAN_CTR oem_factl[5] = {
-		/* temperature input, fan mode, frequency, low_duty, med_duty, multiplier, lowtemp, medtemp, hightemp, LinearRange, LinearHoldCount */
-		/* imb_a180 FanOUT0 Fan header J32 */
-		{FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60,  0, 40, 65, 85, 0, 0},
-		/* imb_a180 FanOUT1 Fan header J31*/
-		{FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60,  0, 40, 65, 85, 0, 0},
-		{FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60,  0, 40, 65, 85, 0, 0},
-		{FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60,  0, 40, 65, 85, 0, 0},
-		{FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60,  0, 40, 65, 85, 0, 0},
-	};
-	LibAmdMemCopy ((VOID *)(FchParams->Hwm.HwmFanControl), &oem_factl, (sizeof(FCH_HWM_FAN_CTR) * 5), FchParams->StdHeader);
-
-	/* Enable IMC fan control. the recommand way */
-	if (IS_ENABLED(CONFIG_HUDSON_IMC_FWM)) {
-		/* HwMonitorEnable = TRUE &&  HwmFchtsiAutoOpll ==FALSE to call FchECfancontrolservice */
-		FchParams->Hwm.HwMonitorEnable = TRUE;
-		FchParams->Hwm.HwmFchtsiAutoPoll = FALSE;/* 0 disable, 1 enable TSI Auto Polling */
-
-		FchParams->Imc.ImcEnable = TRUE;
-		FchParams->Hwm.HwmControl = 1;	/* 1 IMC, 0 HWM */
-		FchParams->Imc.ImcEnableOverWrite = 1; /* 2 disable IMC , 1 enable IMC, 0 following hw strap setting */
-
-		LibAmdMemFill(&(FchParams->Imc.EcStruct), 0, sizeof(FCH_EC), FchParams->StdHeader);
-
-		/* Thermal Zone Parameter */
-		FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg0 = 0x00;
-		FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg1 = 0x00;	/* Zone */
-		FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg2 = 0x00; //BIT0 | BIT2 | BIT5;
-		FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg3 = 0x00;//6 | BIT3;
-		FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg4 = 0x00;
-		FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg5 = 0x00;
-		FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg6 = 0x98;	/* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
-		FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg7 = 2;
-		FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg8 = 0;	/* PWM steping rate in unit of PWM level percentage */
-		FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg9 = 0;
-
-		/* IMC Fan Policy temperature thresholds */
-		FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg0 = 0x00;
-		FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg1 = 0x00;	/* Zone */
-		FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg2 = 0;///80;	/*AC0 threshold in Celsius */
-		FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg3 = 0;	/*AC1 threshold in Celsius */
-		FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg4 = 0;	/*AC2 threshold in Celsius */
-		FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg5 = 0;	/*AC3 threshold in Celsius, 0xFF is not define */
-		FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg6 = 0;	/*AC4 threshold in Celsius, 0xFF is not define */
-		FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg7 = 0;	/*AC5 threshold in Celsius, 0xFF is not define */
-		FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg8 = 0;	/*AC6 threshold in Celsius, 0xFF is not define */
-		FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg9 = 0;	/*AC7 lowest threshold in Celsius, 0xFF is not define */
-		FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegA = 0;	/*critical threshold* in Celsius, 0xFF is not define */
-		FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegB = 0x00;
-
-		/* IMC Fan Policy PWM Settings */
-		FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg0 = 0x00;
-		FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg1 = 0x00;	/* Zone */
-		FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg2 = 0;	/* AL0 percentage */
-		FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg3 = 0;	/* AL1 percentage */
-		FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg4 = 0;	/* AL2 percentage */
-		FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg5 = 0x00;	/* AL3 percentage */
-		FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg6 = 0x00;	/* AL4 percentage */
-		FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg7 = 0x00;	/* AL5 percentage */
-		FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg8 = 0x00;	/* AL6 percentage */
-		FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg9 = 0x00;	/* AL7 percentage */
-
-		FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg0 = 0x00;
-		FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg1 = 0x01;	/* Zone */
-		FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg2 = 0x55;//BIT0 | BIT2 | BIT5;
-		FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg3 = 0x17;
-		FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg4 = 0x00;
-		FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg5 = 0x00;
-		FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg6 = 0x90;	/* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
-		FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg7 = 0;
-		FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg8 = 0;	/* PWM steping rate in unit of PWM level percentage */
-		FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg9 = 0;
-
-		FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg0 = 0x00;
-		FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg1 = 0x01;	/* zone */
-		FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg2 = 60;	/*AC0 threshold in Celsius */
-		FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg3 = 40;	/*AC1 threshold in Celsius */
-		FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg4 = 0;	/*AC2 threshold in Celsius */
-		FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg5 = 0;	/*AC3 threshold in Celsius, 0xFF is not define */
-		FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg6 = 0;	/*AC4 threshold in Celsius, 0xFF is not define */
-		FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg7 = 0;	/*AC5 threshold in Celsius, 0xFF is not define */
-		FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg8 = 0;	/*AC6 threshold in Celsius, 0xFF is not define */
-		FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg9 = 0;	/*AC7 lowest threshold in Celsius, 0xFF is not define */
-		FchParams->Imc.EcStruct.MsgFun83Zone1MsgRegA = 0;	/*critical threshold* in Celsius, 0xFF is not define */
-		FchParams->Imc.EcStruct.MsgFun83Zone1MsgRegB = 0x00;
-
-		FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg0 = 0x00;
-		FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg1 = 0x01;	/*Zone */
-		FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg2 = 0;	/* AL0 percentage */
-		FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg3 = 0;	/* AL1 percentage */
-		FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg4 = 0;	/* AL2 percentage */
-		FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg5 = 0x00;	/* AL3 percentage */
-		FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg6 = 0x00;	/* AL4 percentage */
-		FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg7 = 0x00;	/* AL5 percentage */
-		FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg8 = 0x00;	/* AL6 percentage */
-		FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg9 = 0x00;	/* AL7 percentage */
-
-		FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg0 = 0x00;
-		FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg1 = 0x2;	/* Zone */
-		FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg2 = 0x0;//BIT0 | BIT2 | BIT5;
-		FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg3 = 0x0;
-		FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg4 = 0x00;
-		FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg5 = 0x00;
-		FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg6 = 0x98;	/* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
-		FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg7 = 2;
-		FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg8 = 5;	/* PWM steping rate in unit of PWM level percentage */
-		FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg9 = 0;
-
-		FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg0 = 0x00;
-		FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg1 = 0x3;	/* Zone */
-		FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg2 = 0x0;//BIT0 | BIT2 | BIT5;
-		FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg3 = 0x0;
-		FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg4 = 0x00;
-		FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg5 = 0x00;
-		FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg6 = 0x0;	/* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
-		FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg7 = 0;
-		FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg8 = 0;	/* PWM steping rate in unit of PWM level percentage */
-		FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg9 = 0;
-
-		/* IMC Function */
-		FchParams->Imc.EcStruct.IMCFUNSupportBitMap = 0x333;//BIT0 | BIT4 |BIT8;
-
-		/* NOTE:
-		 * FchInitLateHwm will overwrite the EcStruct with EcDefaultMassege,
-		 * AGESA put EcDefaultMassege as global data in ROM, so we can't overwride it.
-		 * so we remove it from AGESA code. Please Seee FchInitLateHwm.
-		 */
-	} else {
-		/* HWM fan control, the way not recommand */
-		FchParams->Imc.ImcEnable = FALSE;
-		FchParams->Hwm.HwMonitorEnable = TRUE;
-		FchParams->Hwm.HwmFchtsiAutoPoll = TRUE;/* 1 enable, 0 disable TSI Auto Polling */
-	}
-}
-#endif
-
-
 void board_FCH_InitReset(struct sysinfo *cb_NA, FCH_RESET_DATA_BLOCK *FchParams_reset)
 {
 }
@@ -296,7 +118,4 @@ void board_FCH_InitEnv(struct sysinfo *cb_NA, FCH_DATA_BLOCK *FchParams_env)
 {
 	/* Azalia Controller OEM Cqodec Table Pointer */
 	FchParams_env->Azalia.AzaliaOemCodecTablePtr = (CODEC_TBL_LIST*)CodecTableList;
-
-	/* Fan Control */
-	//oem_fan_control(FchParams_env);
 }