This patch unifies the use of config options in v2 to all start with CONFIG_

It's basically done with the following script and some manual fixup:

VARS=`grep ^define src/config/Options.lb | cut -f2 -d\ | grep -v ^CONFIG | grep -v ^COREBOOT |grep -v ^CC`
for VAR in $VARS; do
	find . -name .svn -prune -o -type f -exec perl -pi -e "s/(^|[^0-9a-zA-Z_]+)$VAR($|[^0-9a-zA-Z_]+)/\1CONFIG_$VAR\2/g" {} \;
done

Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4381 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

1 files changed, 58 insertions, 58 deletions

diff --git a/src/mainboard/asi/mb_5blgp/Options.lb b/src/mainboard/asi/mb_5blgp/Options.lb
index 870f3b80f9..f5854b3b7f 100644
--- a/src/mainboard/asi/mb_5blgp/Options.lb
+++ b/src/mainboard/asi/mb_5blgp/Options.lb
@@ -18,45 +18,45 @@
 ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
 ##
 
-uses HAVE_MP_TABLE
+uses CONFIG_HAVE_MP_TABLE
 uses CONFIG_CBFS
-uses HAVE_PIRQ_TABLE
-uses USE_FALLBACK_IMAGE
-uses HAVE_FALLBACK_BOOT
-uses HAVE_HARD_RESET
-uses HAVE_OPTION_TABLE
-uses USE_OPTION_TABLE
+uses CONFIG_HAVE_PIRQ_TABLE
+uses CONFIG_USE_FALLBACK_IMAGE
+uses CONFIG_HAVE_FALLBACK_BOOT
+uses CONFIG_HAVE_HARD_RESET
+uses CONFIG_HAVE_OPTION_TABLE
+uses CONFIG_USE_OPTION_TABLE
 uses CONFIG_ROM_PAYLOAD
-uses IRQ_SLOT_COUNT
-uses MAINBOARD
-uses MAINBOARD_VENDOR
-uses MAINBOARD_PART_NUMBER
+uses CONFIG_IRQ_SLOT_COUNT
+uses CONFIG_MAINBOARD
+uses CONFIG_MAINBOARD_VENDOR
+uses CONFIG_MAINBOARD_PART_NUMBER
 uses COREBOOT_EXTRA_VERSION
-uses ARCH
-uses FALLBACK_SIZE
-uses STACK_SIZE
-uses HEAP_SIZE
-uses ROM_SIZE
-uses ROM_SECTION_SIZE
-uses ROM_IMAGE_SIZE
-uses ROM_SECTION_SIZE
-uses ROM_SECTION_OFFSET
+uses CONFIG_ARCH
+uses CONFIG_FALLBACK_SIZE
+uses CONFIG_STACK_SIZE
+uses CONFIG_HEAP_SIZE
+uses CONFIG_ROM_SIZE
+uses CONFIG_ROM_SECTION_SIZE
+uses CONFIG_ROM_IMAGE_SIZE
+uses CONFIG_ROM_SECTION_SIZE
+uses CONFIG_ROM_SECTION_OFFSET
 uses CONFIG_ROM_PAYLOAD_START
-uses PAYLOAD_SIZE
-uses _ROMBASE
-uses _RAMBASE
-uses XIP_ROM_SIZE
-uses XIP_ROM_BASE
-uses CROSS_COMPILE
+uses CONFIG_PAYLOAD_SIZE
+uses CONFIG_ROMBASE
+uses CONFIG_RAMBASE
+uses CONFIG_XIP_ROM_SIZE
+uses CONFIG_XIP_ROM_BASE
+uses CONFIG_CROSS_COMPILE
 uses CC
-uses HOSTCC
-uses OBJCOPY
-uses DEFAULT_CONSOLE_LOGLEVEL
-uses MAXIMUM_CONSOLE_LOGLEVEL
+uses CONFIG_HOSTCC
+uses CONFIG_OBJCOPY
+uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
+uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
 uses CONFIG_CONSOLE_SERIAL8250
-uses TTYS0_BAUD
-uses TTYS0_BASE
-uses TTYS0_LCS
+uses CONFIG_TTYS0_BAUD
+uses CONFIG_TTYS0_BASE
+uses CONFIG_TTYS0_LCS
 uses CONFIG_COMPRESSED_PAYLOAD_LZMA
 uses CONFIG_UDELAY_TSC
 uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
@@ -64,7 +64,7 @@ uses CONFIG_VIDEO_MB
 uses CONFIG_SPLASH_GRAPHIC
 uses CONFIG_GX1_VIDEO
 uses CONFIG_GX1_VIDEOMODE
-uses PIRQ_ROUTE
+uses CONFIG_PIRQ_ROUTE
 
 ## Enable VGA with a splash screen (only 640x480 to run on most monitors).
 ## We want to support up to 1024x768@16 so we need 2MiB video memory.
@@ -74,34 +74,34 @@ default CONFIG_GX1_VIDEOMODE = 0
 default CONFIG_SPLASH_GRAPHIC = 1
 default CONFIG_VIDEO_MB = 2
 
-default ROM_SIZE = 256 * 1024
-default HAVE_PIRQ_TABLE = 1
-default IRQ_SLOT_COUNT = 0		# Override this in targets/*/Config.lb.
-default PIRQ_ROUTE = 1
-default HAVE_FALLBACK_BOOT = 1
-default HAVE_MP_TABLE = 0
-default HAVE_HARD_RESET = 0
+default CONFIG_ROM_SIZE = 256 * 1024
+default CONFIG_HAVE_PIRQ_TABLE = 1
+default CONFIG_IRQ_SLOT_COUNT = 0		# Override this in targets/*/Config.lb.
+default CONFIG_PIRQ_ROUTE = 1
+default CONFIG_HAVE_FALLBACK_BOOT = 1
+default CONFIG_HAVE_MP_TABLE = 0
+default CONFIG_HAVE_HARD_RESET = 0
 default CONFIG_UDELAY_TSC = 1
 default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1
-default HAVE_OPTION_TABLE = 0
-default MAINBOARD_VENDOR = "N/A"	# Override this in targets/*/Config.lb.
-default MAINBOARD_PART_NUMBER = "N/A"	# Override this in targets/*/Config.lb.
-default ROM_IMAGE_SIZE = 64 * 1024
-default FALLBACK_SIZE = 128 * 1024
-default STACK_SIZE = 8 * 1024
-default HEAP_SIZE = 16 * 1024
-default USE_OPTION_TABLE = 0
-default _RAMBASE = 0x00004000
+default CONFIG_HAVE_OPTION_TABLE = 0
+default CONFIG_MAINBOARD_VENDOR = "N/A"	# Override this in targets/*/Config.lb.
+default CONFIG_MAINBOARD_PART_NUMBER = "N/A"	# Override this in targets/*/Config.lb.
+default CONFIG_ROM_IMAGE_SIZE = 64 * 1024
+default CONFIG_FALLBACK_SIZE = 128 * 1024
+default CONFIG_STACK_SIZE = 8 * 1024
+default CONFIG_HEAP_SIZE = 16 * 1024
+default CONFIG_USE_OPTION_TABLE = 0
+default CONFIG_RAMBASE = 0x00004000
 default CONFIG_ROM_PAYLOAD = 1
-default CROSS_COMPILE = ""
-default CC = "$(CROSS_COMPILE)gcc "
-default HOSTCC = "gcc"
+default CONFIG_CROSS_COMPILE = ""
+default CC = "$(CONFIG_CROSS_COMPILE)gcc "
+default CONFIG_HOSTCC = "gcc"
 default CONFIG_CONSOLE_SERIAL8250 = 1
-default TTYS0_BAUD = 115200
-default TTYS0_BASE = 0x3f8
-default TTYS0_LCS = 0x3		# 8n1
-default DEFAULT_CONSOLE_LOGLEVEL = 9
-default MAXIMUM_CONSOLE_LOGLEVEL = 9
+default CONFIG_TTYS0_BAUD = 115200
+default CONFIG_TTYS0_BASE = 0x3f8
+default CONFIG_TTYS0_LCS = 0x3		# 8n1
+default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 9
+default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9
 
 #
 # CBFS